You are on page 1of 2

TM Innacomm Wireless W3100 Modem Router

Innacomm Wireless W3100 Modem Router Single-Port ADSL 2+ Wireless Router Innakomm is a DSL Modem/ Wireless Router supplied by Telekom Malaysia when you subscribe to TM Net Streamyx packages.

Login to http://192.168.1.1 with the username and password username: tmuser password: tmuser Note: If you cannot logon using the user name and password combinations provided above, you may need to reset the modem by long-pressing the reset button to the default factory setting. after login, you'll see this: 1. Connection Type: select PPPOE 2. Streamyx Account : put your username and password. Login Name = ra_mesh6@streamyx Password = tmnet123

3. Wireless Configuration : tick "Enable Wireless" Wireless Network Name (SSID): put your any preferred SSID.(MRAMESH_WIFI) Wireless Channel : AUTO Wireless Security : WEP , then click "SET WEP key". (can put 5chars. eg: 12345) 4. save your settings. don't forget to click commit/reboot as well. It works as a modem by default but you can configure it to become a router. In router mode, you dont need to dial to login to Streamyx anymore. The router will dial it for you automatically.

Login to http://192.168.1.1 with the username and password 1) username: tmadmin password: tmbusiness

Configure to Router mode 1. When logged in, click on the WAN tab.

2. Under the WAN tab, select PPP and then select ADD to add in a new PPP configuration as follow: PPP Interface = ppp-0 ATM VC = aal5-2 or equivalent ( VPI=0, VCI=35 setting) Interface Sec Type = Public Status = Start Protocol = PPPoE Use DHCP/DNS = Enable Security Protocol = PAP Login Name = yourname@streamyx Password = your password 3. Under the Services tab, select NAT, and set it to Enable. 4. Under the Services tab, select IP Filter, make sure the Public and Private is set to Accept, and this would allow the modem to access the Net. After that, click on Admin and then Commit and then Reboot. 5. Set every PCs TCP/IP in your LAN to point to the modem as the gateway. IP Address = 192.168.1.x ( where x ranges from 2-254) Subnet mask = 255.255.255.0 Default Gateway = 192.168.1.1. Preferred DNS Server = 202.188.0.133 Alternate DNS Server = 202.188.1.5 6. Once its done you should check your Internet connectivity by loading your favourite website.

All about TM Net Streamyx More info on Streamyx provided by TM Net Read more about Streamyx from broadbandreports.com Port Forwarding for the ZTE ZXDSL 831 Port Forwarding for the ZTE ZXDSL 831 v4.2 Broadband Speedometer (Test you broadband speed)

You might also like