Professional Documents
Culture Documents
com
KA5x0165Rxx-SERIES
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consist of high voltage power SenseFET and current mode PWM IC. Included PWM controller features integrated fixed oscillator, under voltage lock out, leading edge blanking, optimized gate turn-on/ turn-off driver, thermal shut down protection, over voltage protection, and temperature compensated precision current sources for loop compensation and fault protection circuitry compared to discrete MOSFET and controller or RCC switching converter solution, The Fairchild Power Switch(FPS) can reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. It is well suited for cost effective design of flyback converters.
TO-220F-4L 8-DIP
Internal bias
DRAIN SFET
R FB 5A 1mA 2.5R 1R 9V + 7.5V + 27V Thermal S/D OVER VOLTAGE S/D + L.E.B 0.1V
S R Q
GND
Power on reset
Rev.1.0.5
2003 Fairchild Semiconductor Corporation
KA5X0165RXX-SERIES
Value 650 30 4.0 1.0 0.7 95 30 -0.3 to VSD 40 0.32 +160 -25 to +85 -55 to +150
Continuous Drain Current (TC=25C) Continuous Drain Current (TC=100C) Single Pulsed Avalanche Energy Maximum Supply Voltage Analog Input Voltage Range Total Power Dissipation Operating Junction Temperature. Operating Ambient Temperature. Storage Temperature Range.
(2)
Note: 1. Repetitive rating: Pulse width limited by maximum junction temperature 2. L=24mH, starting Tj=25C
KA5X0165RXX-SERIES
Symbol BVDSS IDSS RDS(ON) gfs Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd
Condition VGS=0V, ID=50A VDS=Max. Rating, VGS=0V VDS=0.8Max. Rating, VGS=0V, TC=125C VGS=10V, ID=0.5A VDS=50V, ID=0.5A VGS=0V, VDS=25V, f=1MHz VDD=0.5B VDSS, ID=1.0A (MOSFET switching time is essentially independent of operating temperature) VGS=10V, ID=1.0A, VDS=0.5B VDSS (MOSFET switching time is essentially independent of operating temperature)
Typ. 8 250 25 10 12 4 30 10 3 9
Max. 50 200 10 21 -
Unit V A A S pF
nS
nC
KA5X0165RXX-SERIES
Condition VFB=GND VFB=GND KA5H0165Rxx KA5M0165Rx KA5L0165Rx -25C Ta +85C KA5H0165Rxx KA5M0165Rx KA5L0165Rx Ta=25C, 0V Vfb 3V Vfb 6.5V Ta=25C, 3V Vfb VSD Ta=25C -25C Ta +85C Max. inductor current
Min. 14 8.2 90 61 45 62 72
mA V A V mV/C A
CURRENT LIMIT(SELF-PROTECTION)SECTION
Note: 1. These parameters, although guaranteed, are not 100% tested in production 2. These parameters, although guaranteed, are tested in EDS (wafer test) process
KA5X0165RXX-SERIES
25
50
75
100
125 150
Temperature [C]
Figure 1. Operating Frequency
Temperature [C]
Figure 2. Feedback Source Current
1.1 1.05
IIpeak 1 over
0.95 0.9 0.85 0 25 50 75 100 125 150 0.8 -25 0 25 50 75 100 125 150
Temperature [C]
Figure 3. Operating Supply Current
Temperature [C]
Figure 4. Peak Current Limit
1.5 1.3
Istart
Vstart 1
0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150
Temperature [C]
Figure 5. Start up Current
Temperature [C]
Figure 6. Start Threshold Voltage
KA5X0165RXX-SERIES
Vstop 1
0.95 0.9 0.85 -25 0 25 50 75 100 125 150
Dmax 1
0.95 0.9 0.85 -25 0 25 50 75 100 125 150
Temperature [C]
Figure 7. Stop Threshold Voltage
Temperature [C]
Figure 8. Maximum Duty Cycle
Vsd 1
0.95 0.9 0.85 -25
25
50
75
25
50
75
Temperature [C]
Figure 9. VCC Zener Voltage
Temperature [C]
Figure 10. Shutdown Feedback Voltage
Vovp 1
0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150
Temperature [C]
Figure 11. Shutdown Delay Current
Temperature [C]
Figure 12. Over Voltage Protection
KA5X0165RXX-SERIES
Vss
1 0.9
Temperature [C]
Figure13. Soft Start Voltage
Temperature [C]
Figure 14. Static Drain-Source on Resistance
KA5X0165RXX-SERIES
Package Dimensions
TO-220F-4L
KA5X0165RXX-SERIES
TO-220F-4L(Forming)
KA5X0165RXX-SERIES
8-DIP
10
KA5X0165RXX-SERIES
Ordering Information
Product Number KA5H0165RTU KA5H0165RYDTU KA5M0165RTU KA5M0165RYDTU KA5L0165RTU KA5L0165RYDTU KA5H0165RN KA5M0165RN KA5L0165RN Package TO-220F-4L TO-220F-4L(Forming) TO-220F-4L TO-220F-4L(Forming) TO-220F-4L TO-220F-4L(Forming) 8-DIP 8-DIP 8-DIP Marking Code 5H0165R 5M0165R 5L0165R 5H0165R 5M0165R 5L0165R BVDSS 650V 650V 650V 650V 650V 650V FOSC 100kHz 67kHz 50kHz 100kHz 67kHz 50kHz RDS(on) 8 8 8 8 8 8
Package 8-DIP
BVDSS 650V
FOSC 100kHz
RDS(on) 8
11
KA5X0165RXX-SERIES
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.
www.fairchildsemi.com 8/25/03 0.0m 001 Stock#DSxxxxxxxx 2003 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.