You are on page 1of 4

GENERAL INSTRUCTIONS

The following instructions are intended to provide only a general overview of the radio removal process. They are intended for use by qualified technicians. Qualified technicians are properly trained individuals having the equipment, tools, safety instruction, and knowledge to do this procedure properly and safely. Please refer to the complete service manual on Mitsubishitechinfo.com for detailed instructions and safety warnings. If you are not comfortable in removing your radio, we recommend taking your vehicle to an Authorized Mitsubishi Motors Dealership. WARNING During removal and installation of the radio, never touch or damage yellow color wire harnesses/connectors and/or parts with a yellow connector. Those are components of the SRS air bag system. Damaging SRS airbag components can result in inadvertent air bag deployment or render the SRS air bag system inoperative. Shown at left is an example of the label affixed to the radio with the information you need.

Common household tools are needed for this project. - Medium Phillips screw driver - Flat-blade screw drivers of various sizes - Plastic spatula - Household pliers - Electrical tape

Insulating Tape Battery

Before beginning work, turn the ignition key to LOCK position and disconnect the black negative battery cable. Wrap the terminal in electrical tape to prevent it from touching the battery post. Wait 60 seconds or more before proceeding. The Supplemental Restraint System is designed to retain enough voltage to deploy the air bags for a short time even if the battery is disconnected during a crash. As a further caution, do not let the console bump against the SRS control module during the radio removal operation.

Battery Cable

On subsequent pages of these instructions, you will find diagrams similar to the one at left to help you access the label affixed to the radio chassis. Depending on the vehicle, this may include Floor Console and Instrument Panel drawings.

2 1 2 3 2 4 2

2001 MONTERO RADIO WITH CD PLAYER

1. CENTER PANEL 2. RADIO WITH CD PLAYER 3. RADIO WITH CD PLAYER BRACKET

2001 MONTERO FLOOR CONSOLE ASSEMBLY


24 25 16 17 14

14 15 21 22 20 23 15

18

19

1. CENTER PANEL ASSEMBLY 2. CLOCK OR RV METER 3. RADIO, TAPE PLAYER OR BOX 4. HEATER CONTROL ASSEMBLY 5. GLOVE BOX STOPPER 6. GLOVE BOX ASSEMBLY 7. GLOVE BOX LOCK 8. GLOVE BOX LIGHT SWITCH CONNECTOR 9. GLOVE BOX LIGHT SWITCH 10. GLOVE BOX LIGHT 11. UPPER GLOVE BOX STRIKER 12. UPPER GLOVE BOX ASSEMBLY 13. UPPER GLOVE BOX LID LOCK

14. INSTRUMENT PANEL SIDE COVER 15. AIR OUTLET ASSEMBLY 16. METER BEZEL 17. COMBINATION METER 18. LOWER PANEL 19. SWITCH PANEL 20. COLUMN COVER 21. STAY A 22. STAY B 23. CORNER LOWER PANEL 24. PHOTO SENSOR CONNECTOR 25. INSTRUMENT PANEL ASSEMBLY

You might also like