Professional Documents
Culture Documents
midas Gen
midas Gen
midas Gen
Contents
1. Introduction of Design Features 2. Design of RC Building
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Design Type
Steel
Steel : Steel code check Steel Optimal Design / Displacement Optimal Design
RC
Footing : design
Footing
3 3
midas Gen
Introduction
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Steel Design
AISC-LRFD AISC-ASD AISI-CFSD Eurocode 3 BS5950 IS:800 CSA-S16-01 GBJ17, GB50017 AIJ-ASD
SRC Design
SSRC79 JGJ138 CECS28 AIJ-SRC TWN-SRC AIK-SRC KSSC-CFT Footing Design ACI318
KSCE-USD
KCI-USD
TWN-ASD, LSD
AIK-ASD, LSD, CFSD KSCE-ASD
BS8110
Slab Design
Eurocode 2
KSSC-ASD
Steel Design
Eurocode3(Irregular Section)
Composite Design
Eurocode 4 (Irregular Section)
Footing Design
Eurocode 2 (L, interted T)
5 5
midas Gen
2. Design of RC Building
PURPOSE
To Learn RC Frame and Wall Design Features
One Stop Solution for Building and Service Structures MIDAS On-Demand General
7 7
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Design Based on the section size and the factored load obtained from the most unfavorable load combination, rebar data such as rebar size and spacing are determined. Therefore, design can be performed when the section size is determined without rebar data. Checking Strength verification can be performed by automatic design or by using the information of rebars (diameter, number and design parameters) entered by the user. The results appear in blue when the strength verifications for the given section properties and rebars are satisfactory, otherwise they appear in red.
Rebar Input
Automatic Design by Gen Manual Calculation Automatic Rebar update Modify Rebar Input Data Strength Verification with Updated Rebars
Design
Check
8 8
One Stop Solution for Building and Service Structures MIDAS On-Demand General
9 9
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Wall design
10 10
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Wall Design
Resistance ratio
cd fcd
11 11
midas Gen
Wall element
Division of Wall element between story is not allowed.
12
midas Gen
13
midas Gen
14
midas Gen
15
midas Gen
Wall ID
16
midas Gen
17
midas Gen
18
midas Gen
PURPOSE
To Learn Capacity Design features
19
One Stop Solution for Building and Service Structures MIDAS On-Demand General
20 20
One Stop Solution for Building and Service Structures MIDAS On-Demand General
structures to provide the appropriate amount of ductility in the corresponding ductility classes. Automatic capacity design capability for beam, column, wall and beam-column joint EN 1998-1: 2004 (DCM/DCH), NTC2008 (CD B, CD A), ACI318-05 Design action effects are calculated in accordance with the capacity design rule. Special provision for ductile primary seismic walls is considered. Detailing for local ductility is considered. - max/min reinforcement ratio of the tension zone - the spacing of hoops within the critical region - mechanical volumetric ratio of confining hoops with the critical regions
21 21
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Where, MRb: Beam moment resistance Mce : column member force due to seismic load case
22 22
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Where, MRb: Beam moment resistance MRc: Column moment resistance (calcul ated using same axial force ratio in PM interaction curve) Mce: Bending moment of column due to seismic load case
23 23
One Stop Solution for Building and Service Structures MIDAS On-Demand General
Wall systems
Dual systems
24 24
midas Gen
25
MIDAS On-Demand Service Integrated Design System for buildings and General Structures
Stress Contour
Moment- Curvature
MIDAS Information Technology Co., Ltd.
26 26
MIDAS On-Demand Service Integrated Design System for buildings and General Structures
27 27
MIDAS On-Demand Service Integrated Design System for buildings and General Structures
Word format reports can automatically be generated for selected input & output data (figures, tables, graphs, and text).
28 28
MIDAS On-Demand Service Integrated Design System for buildings and General Structures
29 29
midas Gen
4. Q & A
Q&A
Thank you
30