Professional Documents
Culture Documents
Table of Contents
Page Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 & 3 Thermowell Design and Selection Criteria . . . . . . . . . . . . . . . . . . 4 Thermowell Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Standard-Duty, Threaded Thermowells . . . . . . . . . . . . . . . . . . 6 & 7 Heavy-Duty, Threaded Thermowells . . . . . . . . . . . . . . . . . . . . 8 & 9 Straight-Shank, Threaded Thermowells . . . . . . . . . . . . . . . 10 & 11 Limited-Space Thermowells . . . . . . . . . . . . . . . . . . . . . . . . 12 & 13 Straight-Shank, Socket-Weld Thermowells . . . . . . . . . . . . . 14 & 15 Heavy-Duty, Socket-Weld Thermowells . . . . . . . . . . . . . . . 16 & 17 Reduced-Tip, Socket-Weld Thermowells . . . . . . . . . . . . . . 18 & 19 Weld-In Thermowells. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 & 21 Sanitary, Weld-In Thermowells . . . . . . . . . . . . . . . . . . . . . . 22 & 23 Standard, Flanged Thermowells . . . . . . . . . . . . . . . . . . . . . 24 & 25 Heavy-Duty, Flanged Thermowells . . . . . . . . . . . . . . . . . . . 26 & 27 Reduced-Tip, Flanged Thermowells . . . . . . . . . . . . . . . . . . 28 & 29 Heavy-Duty, Van Stone Thermowells . . . . . . . . . . . . . . . . . 30 & 31 Straight Van Stone Thermowells . . . . . . . . . . . . . . . . . . . . . 32 & 33 Reduced-Tip Van Stone Thermowells . . . . . . . . . . . . . . . . . 34 & 35 Sanitary-Connected Thermowells . . . . . . . . . . . . . . . . . . . . 36 & 37 W81 Series Sanitary, Weld-In Thermowells . . . . . . . . . . . . 38 & 39 Thermowell Options and Specifications . . . . . . . . . . . . . . . . . . . 40 ANSI Flanged Thermowell Data Sheet . . . . . . . . . . . . . . . . . . . . 41 Maximum Allowable Working Pressure Tables . . . . . . . . . . 42 & 43 Corrosive Service Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 & 45 Wake Frequency Calculation Request . . . . . . . . . . . . . . . . . . . . 46 Typical Wake Frequency Calculation Report . . . . . . . . . . . . . . . 47
Introduction
The combination of personalized service, quick delivery and a broad line of superior quality temperature sensing products provide the best solutions for all of your temperature measurement applications. For more information, please call us or visit Pyromations Web site at www.pyromation.com.
www.pyromation.com
Our drilled barstock thermowells are machined from NACE compliant materials, including 304 and 316 stainless steel, Hastelloy C276, carbon steel, chrome molybdenum and others. After production, we polish our thermowells to ensure a smooth finish and mark them to guarantee material traceability. Both barstock and flanged thermowells are available in several different physical configurations, a variety of materials, choice of bore sizes, and various process connection types including threaded, socket-weld, weld-in, and flanged. Thermowells are available as separate components or as a part of complete temperature sensor assemblies. Pyromations thermowells have a proven track record in a wide range of applications and industries including: Food and Beverage Oil and Gas Pharmaceutical Chemical Dairy Pulp and Paper Wastewater Power Generation Petro-chemical
A thermowell is a pressure-tight receptacle that protects and extends the life of a temperature sensor in processing applications where the sensor is not mechanically or chemically compatible with the process environment. Installed directly into piping, vats or other parts of process systems, thermowells facilitate sensor replacement in high pressure pipelines and eliminate the need to interrupt the process flow or drain of the process system for sensor maintenance functions. The use of standardized thermowells permits simple relocation of sensors throughout a plant. Strength versus accurate and fast temperature measurement is a balancing act. The factors which tend to produce high strength also tend to reduce the temperature sensors accuracy and speed of response. A properly selected thermowell will balance these opposing factors to produce a design capable of functioning satisfactorily in the intended application. The listed factors are a general guide and are not all inclusive. Refer to ASME Performance Test Code 19.3 for a more authoritative dissertation on proper thermowell selection.
www.pyromation.com
Thermowell Materials
Code 03 04 05 06 07 08 09 22 27 28 29 31
Description Alloy 600 310 SS 446 SS C1018 Alloy 601 316 SS/316 L 304 SS/304 L Brass Alloy 400 Alloy B Alloy C-276 Nickel 200
UNS Number N06600 S31000 S44600 G10180 N06601 S31603 S30403 N04400 N10001 N10276 N02200
Code 35 36 37 38
Description 321 SS 347 SS Alloy 800 Alloy 20 HR-160 Zirconium Alloy X Teflon F22 F11 A105 F91
Trade Names
Inconel
41 50 51 56
Monel
59 60 61 91
Hastelloy Hastelloy
Incoloy, Monel, and Inconel, are registered trademarks of Special Metals Corporation group of companies. Haynes and Hastelloy are registered trademarks of Haynes International, Inc. Carpenter is a registered trademark of SPS Technologies. Teflon is a registered trademark of E.I. du Pont de Nemours and Company
Standard-Duty
Standard-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The stepped construction is used in standard duty applications and increases the speed of response while maintaining mechanical strength. They are designed with standard 0.260 bore diameters to accommodate sensing elements with a 0.252 maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.
www.pyromation.com
Thermowell Dimensions
+ = Wells are made from round bar with milled wrench hex. 1 1/4 NPT and 1 1/2 NPT wells are supplied as round bar with milled wrench flats. (U length for non-lagging wells) = S -1 1/2 (U length for lagging wells) = S -1 1/2 -T (To solve for T), T = S -U -1 1/2 (When U and S are specified) [1] For wells with 1/2 NPT; 1 process thread length and 3/4 hex length dimensions above are reversed.
Q 5/8 Dia. 3/4 Dia. 7/8 Dia. 1 1/4 Dia. 1 1/2 Dia.
V 1/2 Dia. 1/2 Dia. 1/2 Dia. 7/8 Dia. 7/8 Dia.
3/4 NPT
ORDER CODES
Example Order Number:
1-0 CODE S Well Type DESCRIPTION Standard-duty threaded
1-0 1-1 1-2 1-3 1-4 1-5 1-6
S 4 D 06 08 T2 C8S
1-6 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4
1-5
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches
1-2 CODE C D E F G
Pipe Size P DESCRIPTION 1/2 NPT 3/4 NPT 1 NPT 1 1/4 NPT 1 1/2 NPT
1-4 CODE XX
Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-3 CODE XX
Heavy-Duty
Heavy-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature, pressure and corrosion resistance requirements. They are designed with a standard 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. The tapered design is suited for heavy duty applications where greater rigidity is required for increased pressure and flow process conditions. These wells are available as separate components or as part of complete sensor assemblies.
www.pyromation.com
Thermowell Dimensions
+ = Wells are made from round bar with milled wrench hex. 1 1/4 NPT and 1 1/2 NPT wells are supplied as round bar with milled wrench flats. (U length for non-lagging wells) = S -1 1/2 (U length for lagging wells) = S -1 1/2 -T (To solve for T), T = S -U -1 1/2 (When U and S are specified) Maximum tapered length is 16
V (0.385) N/A 49/64 Dia. 49/64 Dia. 7/8 Dia. 7/8 Dia.
ORDER CODES
Example Order Number:
1-0 CODE H 1-1 CODE 4 6 Well Type DESCRIPTION Heavy-duty threaded Bore Size DESCRIPTION 0.260 Dia. bore 0.385 Dia. bore 1-5
1-0 1-1 1-2 1-3 1-4 1-5 1-6
H 4 D 06 08 T2 C8S
1-6 C8 C22 S Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
CODE DESCRIPTION Leave blank if no lag is required T__ 1-4 CODE XX Specify T dimension in inches Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-2 CODE C D E F G
Pipe Size P DESCRIPTION 1/2 NPT 3/4 NPT 1 NPT 1 1/4 NPT 1 1/2 NPT
1-3 CODE XX
Straight-Shank
Straight-Shank, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. They are designed with a standard 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. These wells are available as separate components or as part of complete sensor assemblies.
10
www.pyromation.com
Thermowell Dimensions
+ = Wells are made from round bar with milled wrench hex. 1 1/4 NPT and 1 1/2 NPT wells are supplied as round bar with milled wrench flats. (U length for non-lagging wells) = S -1 1/2 (U length for lagging wells) = S -1 1/2 -T (To solve for T), T = S -U -1 1/2 (When U and S are specified)
Q 5/8 Dia. 3/4 Dia. 7/8 Dia. 1 1/4 Dia. 1 1/2 Dia.
ORDER CODES
Example Order Number:
1-0 CODE ST 1-1 CODE 4 6 Well Type DESCRIPTION Straight-shank threaded Bore Size DESCRIPTION 0.260 Dia. bore 0.385 Dia. bore
1-0 1-1 1-2 1-3 1-4 1-5 1-6
ST 4 D 09 08 T2 C8S
1-6 C8 C22 S 1-5 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
CODE DESCRIPTION Leave blank if no lag is required T__ 1-4 CODE XX Specify T dimension in inches Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-2 CODE C D E F G
Pipe Size P DESCRIPTION 1/2 NPT 3/4 NPT 1 NPT 1 1/4 NPT 1 1/2 NPT
1-3 CODE XX
11
Limited-Space Thermowells
Limited-Space Thermowells are available in a variety of materials and process connection sizes. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. They are intended for use in piping systems where space is limited. They are designed with standard 0.260 bore diameter to accommodate sensing elements with a 0.252 maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.
12
www.pyromation.com
ORDER CODES
1-0 1-1 1-2 1-3 1-4
LS 4 D 2.5 08 C8
1-4 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number CODE DESCRIPTION
1-1 CODE 4
1-3 CODE 1-2 CODE C D E Pipe Size P DESCRIPTION 1/2 NPT 3/4 NPT 1 NPT XX
Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog
13
Straight-Shank, Socket-Weld
Straight-Shank, Socket-Weld Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The StraightShank, Socket-Weld is designed to be used with a 3000 class weld-o-let, which allows the thermowell to be welded permanently into the process. They are designed with a standard 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. These wells are available as separate components or as part of complete sensor assemblies.
14
www.pyromation.com
Thermowell Dimensions
ORDER CODES
Example Order Number:
1-0 CODE SW Well Type DESCRIPTION Straight-shank, socket-weld
1-0 1-1 1-2 1-3 1-4 1-5 1-6
SW 4 D 09 08 T2 C8S
1-6 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4 6
1-5
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-2 CODE D E F G
Pipe Size P DESCRIPTION 3/4 NPS 1 NPS 1 1/4 NPS 1 1/2 NPS
1-4 CODE XX
1-3 CODE XX
15
Heavy-Duty, Socket-Weld
Heavy-Duty, Socket-Weld Thermowells are available in a variety of materials, process connection sizes, lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The Heavy-Duty, SocketWeld is designed to be used with a 3000 class weld-o-let, which allows the thermowell to be welded permanently into the process. They are designed with a standard 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. The tapered design is suited for heavy duty applications where greater rigidity is required due to process conditions. These wells are available as separate components or as part of complete sensor assemblies.
16
www.pyromation.com
Thermowell Dimensions
1 1 1/4 1 1/2
ORDER CODES
1-0 1-1 1-2 1-3 1-4 1-5 1-6
HW 4 D 09 08 T2 C8S
1-6 C8 C22 S 1-5 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4 6
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-2 CODE D E F G
Pipe Size P DESCRIPTION 3/4 NPS 1 NPS 1 1/4 NPS 1 1/2 NPS
1-4 CODE XX
1-3 CODE XX
17
Reduced-Tip, Socket-Weld
Reduced-Tip, Socket-Weld Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The ReducedTip, Socket-Weld is designed to be used with a class 3000 weld-o-let, which allows the thermowell to be welded permanently into the process. The stepped construction is used in standard duty applications and increases the speed of response while maintaining mechanical strength. They are designed with standard 0.260 bore diameters to accommodate sensing elements with a 0.252 maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.
18
www.pyromation.com
Thermowell Dimensions
(U length for non-lagging wells) = S -1 1/2 (U length for lagging wells) = S -1 1/2 -T (To solve for T), T = S -U -1 1/2 (When U and S are specified)
P PIPE SIZE NOM. 3/4 1 1 1/4 1 1/2 DIA. 1.050 1.315 1.660 1.900
ORDER CODES
Example Order Number:
1-0 CODE RW Well Type DESCRIPTION Reduced-tip, socket-weld
1-0 1-1 1-2 1-3 1-4 1-5 1-6
RW 4 D 09 08 T2 C8S
1-6 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4
1-5
CODE DESCRIPTION Leave blank if no lag is required 1-2 CODE D E F G Pipe Size P DESCRIPTION 3/4 NPS 1 NPS 1 1/4 NPS 1 1/2 NPS 1-4 CODE XX Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length T__ Specify T dimension in inches
1-3 CODE XX
19
Weld-In Thermowells
Weld-In Thermowells are available in a variety of materials, process connection sizes, lengths and optional lagging extensions. Thermowell specifications should be based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. Weld-In thermowells are welded directly into the process apparatus. They are designed with a standard 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. The tapered design is suited for heavy duty applications where greater rigidity is required due to process conditions. These wells are available as separate components or as part of complete sensor assemblies.
20
www.pyromation.com
Thermowell Dimensions
P PIPE SIZE
(U length for non-lagging wells) = S -1 1/2 (U length for lagging wells) = S -1 1/2 -T (To solve for T), T = S -U -1 1/2 (When U and S are specified)
ORDER CODES
Example Order Number:
1-0 CODE WI Well Type DESCRIPTION Weld-In
1-0 1-1 1-2 1-3 1-4 1-5 1-6
WI 4 D 09 08 T2 C8S
1-6 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number T Lag Dimension CODE DESCRIPTION
1-1 CODE 4 6
1-5
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-2 CODE D E F G
Pipe Size P DESCRIPTION 3/4 NPS 1 NPS 1 1/4 NPS 1 1/2 NPS 1-3 CODE XX 1-4 CODE XX
21
Sanitary, Weld-In Thermowells are offered in 304 and 316 stainless steel. They are available in a variety of lengths, process connection sizes, and optional lagging extensions. The thermowell is to be welded into a tank or vat with a full crevicefree fillet-weld to prevent corrosion, bacteria growth, and product contamination. Thermowells are supplied with a surface finish that meets or exceeds 32 in Ra. Surface finishes of 15 in Ra or better are available upon request. They are designed with a standard 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. These wells are available as separate components or as part of complete sensor assemblies.
22
www.pyromation.com
Authorized 74-
Thermowell Dimensions
(U length for non-lagging wells) = S -1 1/2 (U length for lagging wells) = S -1 1/2 -T (To solve for T), T = S -U -1 1/2 (When U and S are specified)
ORDER CODES
Example Order Number:
1-0 CODE WS Well Type DESCRIPTION Sanitary weld-in
1-0 1-1 1-2 1-3 1-4 1-5 1-6
WS 4 09 08 T2 C8S
1-5 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4 6
1-4
1-2 CODE XX
S Length DESCRIPTION Specify length in inches using two digits plus fractional length
Specify T dimension in inches Material DESCRIPTION 316 stainless steel 304 stainless steel
23
Standard, Flanged Thermowells are available in a variety of materials, flange types, flange sizes, and pressure ratings. They are also available in various lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The standard, flanged thermowell is supplied with a straight shank and is designed with a 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. These wells are available as separate components or as part of complete sensor assemblies.
24
www.pyromation.com
Thermowell Dimensions
BORE
(U length for non-lagging wells) = S - 2 (U length for lagging wells) = S - 2 - T (To solve for T), T = S - U - 2 (When U and S are specified)
0.260 0.385
ORDER CODES
Example Order Number:
1-0 CODE SF 1-1 CODE 4 6 1-2 CODE 10 13 15 20 30 1-3 CODE F J R Well Type DESCRIPTION Standard flanged Bore Size DESCRIPTION 0.260 Dia. bore 0.385 Dia. bore Flange Size* DESCRIPTION 1 (DN 25) 1 1/4 (DN 32) 1 1/2 (DN 40) 2 (DN 50) 3 (DN 80) Flange Type DESCRIPTION Flat face Ring joint Raised face 1-4 CODE 1 3 6 9 15 Pressure Rating* DESCRIPTION 150 Class 300 Class 600 Class 900 Class 1500 Class 1-5 CODE XX
1-0 1-1 1-2 1-3 1-4 1-5 1-6
SF 4 15 R 1 09 08 T2 C8S
1-8 C8 C22 F S 1-7 Options 316 stainless steel well cap and chain Brass well cap and chain Full penetration weld Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-7
1-8
CODE DESCRIPTION Leave blank if no lag is required Specify T dimension in inches using T__ two digits plus any fractional length 1-6 CODE XX Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
25
Heavy-Duty, Flanged Thermowells are available in a variety of materials, flange types, flange sizes, and pressure ratings. They are also available in various lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The heavy-duty, flanged thermowell is supplied with a 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter. The tapered design is suited for heavy-duty applications where greater rigidity is required for increased pressure and flow process conditions. These wells are available as separate components or as part of complete sensor assemblies.
26
www.pyromation.com
Thermowell Dimensions
Maximum tapered length is 16 (U length for non-lagging wells) = S - 2 (U length for lagging wells) = S - 2 - T (To solve for T), T = S - U - 2 (When U and S are specified)
ORDER CODES
Example Order Number:
1-0 CODE HF 1-1 CODE 4 6 1-2 CODE 10 13 15 20 30 1-3 CODE F J R Well Type DESCRIPTION Heavy-duty, flanged Bore Size DESCRIPTION 0.260 Dia. bore 0.385 Dia. bore 1-7 Flange Size* DESCRIPTION 1 (DN 25) 1 1/4 (DN 32) 1 1/2 (DN 40) 2 (DN 50) 3 (DN 80) Flange Type DESCRIPTION Flat face Ring joint Raised face 1-4 CODE 1 3 6 9 15 Pressure Rating* DESCRIPTION 150 Class 300 Class 600 Class 900 Class 1500 Class 1-5 CODE XX 1-6 CODE XX Optional T Lag Dimension CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches
1-0 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8
HF 4 15 R 1 09 08 T2 C8S
1-8 C8 C22 F S Options 316 stainless steel well cap and chain Brass well cap and chain Full penetration weld Well stamped with customer specified part number CODE DESCRIPTION
Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
27
Reduced-Tip, Flanged Thermowells are available in a variety of materials, flange types, flange sizes, and pressure ratings. They are also available in various lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The stepped construction is normally used in standard-duty applications, and increases the speed of response while maintaining mechanical strength. They are designed with standard 0.260 bore diameters to accommodate sensing elements with 0.252 maximum diameters. These wells are available as separate components or as part of complete sensor assemblies.
28
www.pyromation.com
(U length for non-lagging wells) = S - 2 (U length for lagging wells) = S - 2 - T (To solve for T), T = S - U - 2 (When U and S are specified)
ORDER CODES
Example Order Number:
1-0 CODE RF 1-1 CODE 4 1-2 CODE 10 13 15 20 30 1-3 CODE F J R Well Type DESCRIPTION Reduced-tip, flanged Bore Size DESCRIPTION 0.260 Dia. bore Flange Size* DESCRIPTION 1 (DN 25) 1 1/4 (DN 32) 1 1/2 (DN 40) 2 (DN 50) 3 (DN 80) Flange Type DESCRIPTION Flat face Ring joint Raised face 1-4 CODE 1 3 6 9 15 Pressure Rating* DESCRIPTION 150 Class 300 Class 600 Class 900 Class 1500 Class 1-5 CODE XX 1-6 CODE XX
1-0 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8
RF 4 15 R 1 09 08 T2 C8S
1-8 C8 C22 F S 1-7 Options 316 stainless steel well cap and chain Brass well cap and chain Full penetration weld Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches
Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
29
Heavy-Duty Van Stone Thermowells are available in a variety of materials, flange sizes, and pressure ratings. They are also available in various lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The heavy-duty Van Stone thermowell is supplied with a 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. Van Stone thermowells are connected using a separate and reusable backing flange, eliminating the need for expensive flange materials. The tapered design is suited for heavy-duty applications where greater rigidity is required due to increased pressure and flow process conditions. These wells are available as separate components or as part of complete sensor assemblies.
30
www.pyromation.com
Thermowell Dimensions
Maximum tapered length is 16 (U length for non-lagging wells) = S - 2 (U length for lagging wells) = S - 2 - T (To solve for T), T = S - U - 2 (When U and S are specified)
R DIA. 2 7/8
ORDER CODES
Example Order Number:
1-0 CODE HF Well Type DESCRIPTION Heavy-duty Van Stone
1-0 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8
HF 4 15 V 1 09 08 T2 C8S
1-8 C8 C22 F S 1-7 Options 316 stainless steel well cap and chain Brass well cap and chain Full penetration weld Well stamped with customer specified part number T Lag Dimension CODE DESCRIPTION
1-1 CODE 4 6
CODE DESCRIPTION Leave blank if no lag is required Specify T dimension in inches using T__ two digits plus any fractional length 1-4 CODE 0 1 3 6 9 15 Pressure Rating* DESCRIPTION No backing flange 150 Class 300 Class 600 Class 900 Class 1500 Class 1-5 CODE XX 1-6 CODE XX Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-2 CODE 10 15
1-3 CODE V
Carbon steel lap joint flange standard * Other flange sizes and pressure ratings available upon request.
31
Straight Van Stone Thermowells are available in a variety of materials, flange sizes, and pressure ratings. They are also available in various lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The Straight Van Stone thermowell is supplied with a 0.260 or 0.385 bore diameter to accommodate sensing elements with a 0.252 or 0.377 maximum diameter respectively. Van Stone thermowells are connected using a separate and reusable backing flange eliminating the need for expensive flange materials. These wells are available as separate components or as part of complete sensor assemblies.
32
www.pyromation.com
Thermowell Dimensions
P PIPE SIZE (U length for non-lagging wells) = S - 2 (U length for lagging wells) = S - 2 - T (To solve for T), T = S - U - 2 (When U and S are specified) NOM. 1 1 1/2 DIA. 1.315 1.900 R DIA. 2 2 7/8 Q 0.260 DIA. 3/4 3/4 Q 0.385 DIA. 7/8 7/8
ORDER CODES
Example Order Number:
1-0 CODE SF Well Type DESCRIPTION Straight Van Stone
1-0 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8
SF 4 15 V 1 09 08 T2 C8S
1-8 C8 C22 Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4 6
S 1-7
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches
1-2 CODE 10 15
1-4 CODE 0 1 3 6 9 15
Pressure Rating* DESCRIPTION No backing flange 150 Class 300 Class 600 Class 900 Class 1500 Class
1-6 CODE XX
Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog S Length DESCRIPTION Specify length in inches using two digits plus fractional length
1-3 CODE V
1-5 CODE XX
Carbon steel lap joint flange standard * Other flange sizes and pressure ratings available upon request.
33
Reduced-Tip Van Stone Thermowells are available in a variety of materials, flange sizes, and pressure ratings. They are also offered in various lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions, which include strength, temperature, pressure and corrosion resistance requirements. The Reduced-Tip Van Stone thermowell is supplied with a 0.260 bore diameter to accommodate sensing elements with a 0.252 maximum diameter. The stepped construction is normally used in standard-duty applications and increases the speed of response while maintaining mechanical strength. Van Stone thermowells are connected using a separate and reusable backing flange, eliminating the need for expensive flange materials. These wells are available as separate components or as part of complete sensor assemblies.
34
www.pyromation.com
Thermowell Dimensions
P PIPE SIZE
(U length for non-lagging wells) = S - 2 (U length for lagging wells) = S - 2 - T (To solve for T), T = S -U - 2 (When U and S are specified)
NOM. 1 1 1/2
R DIA.
2 7/8
ORDER CODES
Example Order Number:
1-0 CODE RF Well Type DESCRIPTION Reduced-Tip Van Stone
1-0 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8
RF 4 15 V 1 09 08 T2 C8S
1-8 C8 C22 S Options 316 stainless steel well cap and chain Brass well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-1 CODE 4
1-7
CODE DESCRIPTION Leave blank if no lag is required T__ 1-4 CODE 0 1 3 6 9 15 Pressure Rating* DESCRIPTION No backing flange 150 Class 300 Class 600 Class 900 Class 1500 Class 1-5 CODE XX S Length DESCRIPTION Specify length in inches using two digits plus fractional length 1-6 CODE XX Specify T dimension in inches
1-2 CODE 10 15
Material DESCRIPTION Specify two digit material code as stated in the Thermowell Material Table located near the front of this catalog
1-3 CODE V
Carbon steel backing flange standard * Other flange sizes and pressure ratings available upon request.
35
Sanitary-Connected Thermowells
Sanitary-Connected Thermowells are offered in 304 and 316 stainless steel. The DW and DR series are welded constructions, and they are available in a variety of lengths, cap styles, cap sizes, and optional lagging extensions. Thermowells are supplied with a surface finish that meets or exceeds 32 in Ra. Surface finishes of 15 in Ra or better are available upon request. They are designed with a standard 0.260 bore diameter to accommodate sensing elements with a 0.252 maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.
36
www.pyromation.com
(U length for non-lagging wells) = S - 1 1/2 (U length for lagging wells) = S - 1 1/2 - T (To solve for T), T = S - U - 1 1/ 2 (When U and S are specified)
Authorized 74-
ORDER CODES
Example Order Number:
1-0 CODE DW DR Well Type DESCRIPTION Sanitary well Reduced-Tip Sanitary well
1-0 1-1 1-2 1-3 1-4 1-5
DW 4 25 09 08 T2 C8S
1-6 C8 S Options 316 stainless steel well cap and chain Well stamped with customer specified part number Optional T Lag Dimension CODE DESCRIPTION
1-6
1-1 CODE 4
1-5
CODE DESCRIPTION Leave blank if no lag is required T__ Specify T dimension in inches
1-2 CODE 15 25 35 45
Cap Size & Style DESCRIPTION 1, 1 1/2 Triclamp 16 AMP 2 Triclamp 16 AMP 2 1/2 Triclamp 16 AMP 3 Triclamp 16 AMP
1-4 CODE 08 09
1-3 CODE XX
S Length DESCRIPTION Specify length in inches using two digits plus fractional length
37
Sanitary Weld-In Thermowells are offered in 304 and 316 stainless steel. The thermowell is designed to be welded into a tank or vat with a full crevice-free fillet-weld to prevent corrosion, bacteria growth, and product contamination. Thermowells are supplied with a surface finish that meets or exceeds 32 in Ra. Surface finishes of 15 in Ra or better are available upon request. They are designed with a standard 0.260 bore diameter to accommodate sensing elements with a 0.252 maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.
38
www.pyromation.com
Authorized 74-
ORDER CODES
Example Order Number:
1-0 CODE W81 Well Type DESCRIPTION Sanitary weld-in
W81 - 1 9
1-0
1-1
1-2
1-3
S
1-3 C8 S Options 316 stainless steel well cap and chain Well stamped with customer specified part number CODE DESCRIPTION
1-1
Length
CODE 1 2 3 4
1-2 CODE 8 9
39
Documentation/Testing Certificate of Compliance Hydrostatic Test (Internal) Liquid Dye Penetrant Test Material Test Reports NACE Hardness Test Positive Material Identification Surface Roughness Test Wake Frequency Calculation Weld X-Ray Inspection Services Expedited Delivery Oxygen cleaning Stamping Full Penetration Weld Component/Coatings Abrasive Coatings Plug and Chain - Brass Plug and Chain - Stainless Steel Ring-Joint Flange Tantalum Jacket Teflon Coatings (FEP)
C of C ASTM E1003 Compliant ASTM E1220 Compliant MTR Thermowell must be made of a NACE recognized material. X-Ray Fluorescence Spectrometry ASME B46.1 ASME PTC 19.3 Call for Pricing Call for Pricing ASTM G93 Compliant (when specified) 10 Characters Maximum Performed by welders certified to ASME Section IX, Boiler and Pressure Vessel Code Call for Pricing Call for Pricing Call for Pricing Call for Pricing Call for Pricing Call for Pricing CSA B-51 Boiler, Pressure Vessel and Pressure Piping Code ASME B16.5 prior to fabrication NACE Certification available for applicable materials. (Barstock thermowells meet this specification. Flanged thermowells can be heat treated to comply.) Stress relief, annealing, and custom heat treating available upon request. ASTM Compliance and other applicable National Standards ASME B1.20.1 3A Sanitary Council Standard. Authorization Number: 487 32 in Ra Food Grade Surface Finish 32 maximum for standard drilled thermowells. 61 maximum for full penetrating butt weld, two-piece construction thermowells. Over 61 consult factory. 12 maximum S length for plastic thermowells W (nominal) 10% of minimum wall thickness 0.020 (through 32.00) +0.005 / -0.003 (bore sizes 0.125 through 0.406 I.D.) Lengths up to 22.50 0.0625. Lengths from 22.50 through 48 0.125. Lengths over 48 0.25. Standard marking includes material grade and material traceability codes 0.010 Maximum tapered length is 16.00. U dimensions greater than 16.00 in length are manufactured with a straight OD beginning below the process connection radius and following through with only the last 16.00 of U dimension tapered to minor OD. 1/2-14 - NPT per ANSI B1.20.1 (1 to 3 turns deep per UL 866 and CSA C22.2 No. 30-M1986) 0.25 0.0625
Industry Specifications Canadian Registration Numbers [1] Flanged Thermowells Heat Treating Material Pipe Threads Sanitary Thermowells
Manufacturing Tolerances and Maximums S Length Maximum Bore Bottom Shape Bore Concentricity Bore Depth Bore Diameter Insertion Length Marking Stem Outside Diameter Tapered Allowance Internal Threads Tip Thickness
[1] Available as an option. Must be specified. Teflon is a registered trademark of E.I. du Pont de Nemours and Company.
40
www.pyromation.com
Flange Class 150 150 150 150 150 150 150 150 150 150 300 300 300 300 300 300 300 300 300 300 600 600 600 600 600 600 600 600 600 600
Number of Bolts 4 4 4 4 4 4 4 4 8 8 4 4 4 4 4 8 8 8 8 8 4 4 4 4 4 8 8 8 8 8
1/2 3/4
1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4
t f
(1) HEIGHT OF RAISED FLANGE 0.06 FOR 150 & 300 CLASS 0.25 FOR ALL OTHER CLASSES
41
Threaded Thermowells
MATERIAL ASTM SPECIFICATION A479 Gr. 304/304L A479 Gr. 316/316L A479 Gr. 347 A105 B164 Gr. N04400 B574 Gr. N10276 A182 Gr. F11 A182 Gr. F22 A182 Gr. F91 B473 Gr. N08020 B166 Gr. N06600 TYPE 304/304L 316/316L 347 A105 Alloy 400 F11 F22 F91 Alloy 20 Alloy 600 09 08 36 61 27 60 59 91 38 03 ORDER CODE STRAIGHT 0.260 BORE Wall = 0.158/Q = 5/8 MIN TEMP 7361 psi 7234 psi 7234 psi 8175 psi 6178 psi 9336 psi 8175 psi 10266 psi 13670 psi 8361 psi 6410 psi MAX TEMP 3400 psi 5200 psi 5200 psi 5062 psi 4970 psi 5713 psi 5156 psi 5156 psi 5156 psi 6038 psi 1511 psi 0.385 BORE Wall = 0.165/V = 49/64 MIN TEMP 6007 psi 5900 psi 5900 psi 6753 psi 5103 psi 7712 psi 6753 psi 8374 psi 11142 psi 6907 psi 5295 psi MAX TEMP 2800 psi 4200 psi 4200 psi 4259 psi 4105 psi 4700 psi 4259 psi 4259 psi 4259 psi 4988 psi 1258 psi STEPPED 0.260 BORE Wall = 0.101/V = 1/2 MIN TEMP 5489 psi 5404 psi 5404 psi 6238 psi 4713 psi 7124 psi 6238 psi 7671 psi 10200 psi 6379 psi 4891 psi 5458 psi MAX TEMP 2600 psi 3800 psi 3800 psi 3934 psi 3792 psi 4309 psi 3934 psi 3934 psi 3934 psi 4607 psi 1162 psi 3757 psi MIN -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C TEMPERATURE RANGE C MAX 538 C 538 C 538 C 482 C 482 C 538 C 482 C 482 C 482 C 425 C 650 C MIN -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F F MAX 1000 F 1000 F 1000 F 900 F 900 F 1000 F 900 F 900 F 900 F 800 F 1200 F
Alloy C-276 29
Alloy 800
37
ORDER CODE 09 08 36 61 27 60 59 91 38 03
7153 psi
4923 psi
5909 psi
4067 psi
-28 C
C MIN -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C
593 C
-20 F
F
1100 F
TAPERED Wall = 0.158/V = 5/8 MIN TEMP 7361 psi 7234 psi 7234 psi 8175 psi 6178 psi 9336 psi 8175 psi 10266 psi 13670 psi 8361 psi 6410 psi MAX TEMP 3400 psi 5200 psi 5200 psi 5062 psi 4970 psi 5713 psi 5156 psi 5156 psi 5156 psi 6038 psi 1511 psi Wall = 0.165/V = 49/64 MIN TEMP 6007 psi 5900 psi 5900 psi 6753 psi 5103 psi 7712 psi 6753 psi 8374 psi 11142 psi 6907 psi 5295 psi MAX TEMP 2800 psi 4200 psi 4200 psi 4259 psi 4105 psi 4700 psi 4259 psi 4259 psi 4259 psi 4988 psi 1258 psi
LIMITED SPACE Wall = 0.101/Q = 1/2 MIN TEMP 5489 psi 5404 psi 5404 psi 6238 psi 4713 psi 7124 psi 6238 psi 7671 psi 10200 psi 6379 psi 4891 psi 5458 psi MAX TEMP 2600 psi 3800 psi 3800 psi 3934 psi 3792 psi 4309 psi 3934 psi 3934 psi 3934 psi 4607 psi 1162 psi 3757 psi
TEMPERATURE RANGE MAX 538 C 538 C 538 C 482 C 482 C 538 C 482 C 482 C 482 C 425 C 650 C MIN -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F MAX 1000 F 1000 F 1000 F 900 F 900 F 1000 F 900 F 900 F 900 F 800 F 1200 F
TYPE 304/304L 316/316L 347 A105 Alloy 400 F11 F22 F91 Alloy 20 Alloy 600
Alloy C-276 29
Alloy 800
37
7153 psi
4923 psi
5909 psi
4067 psi
-28 C
593 C
-20 F
1100 F
These tables are for reference only. Other design factors should be taken into consideration in addition to temperature and pressure, such as vibration, corrosion, and installation method.
42
www.pyromation.com
A479 Gr. 304/304L 304/304L A479 Gr. 316/316L 316/316L A479 Gr. 347 A105 B164 Gr. N04400 B574 Gr. N10276 A182 Gr. F11 A182 Gr. F22 A182 Gr. F91 B473 Gr. N08020 B166 Gr. N06600 B408 Gr. N08800 347 A105 Alloy 400 F11 F22 F91 Alloy 20 Alloy 600 Alloy 800
-20 F 1000 F
538 C -20 F 1000 F 538 C -20 F 1000 F 482 C -20 F 485 C -20 F 482 C -20 F 482 C -20 F 482 C -20 F 425 C -20 F 900 F 900 F 900 F 900 F 900 F 800 F
Alloy C-276 29
Flanged Thermowells
MATERIAL ASTM SPECIFICATION A182 Gr. 304/304L A182 Gr. 316/316L A182 Gr. 347 A105 B564 Gr. N04400 B462 Gr. N10276 B462 Gr. N08020 B564 Gr. N06600 B564 Gr. N08800 MATERIAL ASTM SPECIFICATION A182 Gr. 304/304L A182 Gr. 316/316L A182 Gr. 347 A105 B564 Gr. N04400 B462 Gr. N10276 B462 Gr. N08020 B564 Gr. N06600 B564 Gr. N08800 TYPE 304/304L 316/316L 347 A105 Alloy 400 Alloy C-276 Alloy 20 Alloy 600 Alloy 800 TYPE 304/304L 316/316L 347 A105 Alloy 400 Alloy C-276 Alloy 20 Alloy 600 Alloy 800 ORDER CODE 09 08 36 61 27 29 38 03 37 ORDER CODE 09 08 36 61 27 29 38 03 37 CLASS 150 MIN TEMP MAX TEMP 275 psi 275 psi 275 psi 285 psi 230 psi 290 psi 290 psi 290 psi 275 psi 20 psi 20 psi 20 psi 50 psi 50 psi 20 psi 80 psi 20 psi[1] 20 psi[1] CLASS 300 MIN TEMP 720 psi 720 psi 720 psi 740 psi 600 psi 750 psi 750 psi 750 psi 720 psi MAX TEMP 355 psi 365 psi 365 psi 230 psi 275 psi 365 psi 510 psi 70 psi 325 psi CLASS 600 MIN TEMP 1440 psi 1440 psi 1440 psi 1480 psi 1200 psi 1500 psi 1500 psi 1500 psi 1440 psi MAX TEMP 710 psi 725 psi 725 psi 460 psi 550 psi 725 psi 1015 psi 135 psi 645 psi TEMPERATURE RANGE C MIN -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C C MIN -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C -28 C MAX 538 C 538 C 538 C 482 C 482 C 538 C 425 C 650 C 593 C MIN -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F MAX 538 C 538 C 538 C 482 C 482 C 538 C 425 C 650 C 593 C MIN -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F -20 F F MAX 1000 F 1000 F 1000 F 900 F 900 F 1000 F 800 F 1200 F 1100 F F MAX 1000 F 1000 F 1000 F 900 F 900 F 1000 F 800 F 1200 F 1100 F
CLASS 900[2] MIN TEMP MAX TEMP 2160 psi 2160 psi 2160 psi 2220 psi 1800 psi 2250 psi 2250 psi 2250 psi 2160 psi 1065 psi 1090 psi 1090 psi 690 psi 825 psi 1090 psi 1525 psi 205 psi 965 psi
CLASS 1500 MIN TEMP 3600 psi 3600 psi 3600 psi 3705 psi 3000 psi 3750 psi 3750 psi 3750 psi 3600 psi MAX TEMP 1770 psi 1820 psi 1820 psi 1150 psi 1370 psi 1820 psi 2540 psi 345 psi 1610 psi
CLASS 2500 MIN TEMP 6000 psi 5900 psi 5900 psi 6170 psi 5000 psi 6250 psi 6250 psi 5295 psi 5900 psi MAX TEMP 2845 psi 3030 psi 3030 psi 1915 psi 2285 psi 3030 psi 4230 psi 570 psi 2685 psi
TEMPERATURE RANGE
[1] Class 150 flanges are only rated to 538 C [1,000 F]. [2] For NPS less than 3 a Class 1500 flange will be provided. The Class 900 flange and Class 1500 flange are dimensionally the same for this size range. For NPS 3 and 4 Class 900 or Class 1500 must be specified.
These tables are for reference only. Other design factors should be taken into consideration in addition to temperature and pressure, such as vibration, corrosion, and installation method.
43
RECOM. MATERIAL Monel 316 SS[1] Hast C Hast. B Nickel Carp. 20[1] Titanium Hast. C[1] Hast. C Carp. 20[1] Titanium Hast. C[1] 304 SS Hast. C 316 SS[1] TFE FEP 316 SS[1] 304 SS TFE FEP 316 SS[1] 304 SS Titanium 316 SS[1] 316 SS Carp. 20 304 SS[1] Hast. C 316 SS[1] 316 SS Titanium Hast. C[1] Carp. 20 316 SS Titanium 304 SS[1] 304 SS 304 SS[1] Carp. 20 Monel 316 SS[1] Nickel 304 SS[1] TFE FEP 316 SS[1] Hast. C 446 SS Steel[1] TFE FEP Steel[1] Nickel 316 SS[1] Hast. B Steel[1] 304 SS Titanium Hast. B[1] Hast. B TFE FEP 316 SS[1] TFE FEP Hast. C[1] Carp. 20 304 SS 304 SS[1] Hast. C 316 SS 316 SS
44
www.pyromation.com
45
46
www.pyromation.com
Date: Customer Name: Sales Order No.: Pyromation P/N: Tag No:
INPUTS
Thermowell Material:
Grade:
300 Series Austenitic Stainless Steel
English Modulus of Elasticity @ Design Temp.: ................... Density @ Design Temp.: ........................................ Coeff. Of Thermal Expansion @ Design Temp.: ...... 25,894,562 0.287 1.010E-05 (psi) (Lb/in^3) (/F)
Fluid Properties:
Velocity: ................................................................... Design Temperature: ............................................... 48.0 500 (Ft/s) (F) 14.63 260.0 (m/s) (C)
OUTPUTS
Thermowell Natural Frequency: .............................. Vortex Shedding Frequency: ................................... Frequency Ratio: ..................................................... Max. Fluid Velocity: ................................................. Maximum Length: .................................................... Magnification Factor: ........................................... 417 202 79.3 9.663 1.31 (Hz) (Hz) (Ft/s) (in) 417 202 24.18 245.44 1.31 (Hz) (Hz) (m/s) (mm)
0.48 PASS
0.48 PASS
SUMMARY
The thermowell design has passed the wake frequency calculations derived from those used in ASME PTC 19.3-1974 (1986)
Note: This is a typical Wake Frequency Report and is subject to change based on process parameters, customer specifications and code changes.
47
48
www.pyromation.com
5211 Industrial Road Fort Wayne, IN 46825, USA Phone: (260) 484-2580 Fax: (800) 837-6805 or (260) 482-6805 www.pyromation.com
TW 01