Professional Documents
Culture Documents
1) Release Note
Integrated Design System for Building and General Structures
April, 2012
Design Tech Development Team
ACI318-08/11 Updates
5 / 14
RC Common
Design > General Design Parameter > Seismic Design Type
Assign member type for seismic design. for Seismic Design: Apply seismic design for the selected members. for Non-Seismic Design: Do not apply seismic design for the selected members. for Non-Seismic-Force Resisting System : Apply the clause 21.13 Members not designated as part of the seismicforce-resisting system. - Available only when Special Moment Frames is selected.
ACI318-08/11 Updates
6 / 14
RC Beam/Column
Design > Concrete Design Parameter > Design Code : Select [Special Moment Frames].
R is the factor to consider Vc=0 for the Special Moment Frame. See Beam : 21.5.4.2, Column : 21.6.5.2
Design Shear Force is calculated based on Mpr for the Special Moment Frame. See Beam : 21.5.4.1, Column : 21.6.5.1
Select member types for which seismic design is not applied. You can also select individual members using General Design Parameter>Seismic Design Type.
ACI318-08/11 Updates
7 / 14
RC Beam/Column
Design > Concrete Design Parameters > Design Code : Select [Intermediate Moment Frames].
Design shear forces for the Intermediate Moment Frame See Beam : 21.3.3.1, Column : 21.3.3.2
ACI318-08/11 Updates
8 / 14
RC Beam/Column
Design > Concrete Design Parameter > Design Code : Select [Ordinary Moment Frames].
For the Ordinary Moment Frames, any input is not required for Special RC Structural Wall (Clause 21.9)
ACI318-08/11 Updates
9 / 14
RC Wall
Design > Concrete Design Parameter > Design Code : Check-On [Special RC Wall Structural Wall].
21.9 Special structural walls Boundary Element Methods are provided as per 21.9.6.2 and 21.9.6.3
21.9.6.2
Boundary element condition Boundary element vertical length c lw/600(u/hw) u = e*Cd/Ie (Design displacement)
21.9.6.3 fc 0.2fc
MAX[lw, Mu/(4Vu)]
fc 0.15fc
ACI318-08/11 Updates
10 / 14
RC Wall
Design > Concrete Design Parameter > Modify Wall Rebar Data
When Special RC Structural Wall is checked on, BE Horizontal is activated. Dxx@yy: Reinforcement size and spacing of horizontal reinforcements
ACI318-08/11 Updates
11 / 14
RC Wall
Design > Concrete Design Parameter > Design Criteria for Rebars / Design Criteria for Rebars by Member
When Special RC Structural Wall is checked on, Boundary Element reinforcement input is activated.
ACI318-08/11 Updates
12 / 14
RC Wall
Design > Concrete Design Parameter > Boundary Element Method by Wall ID
Boundary Element design method and reference wall can be determined by Wall ID. Displacement Based Method : 21.9.6.2. Stress Based Method : 21.9.6.3.
ACI318-08/11 Updates
13 / 14
RC Wall
Wall Design Result Dialog
When Special RC Structural Wall is checked on, B.E. is included. YES: Boundary Element is necessary. - : Boundary Element is not necessary.
B.E.-Rebar Description Boundary Element is not necessary. Required horizontal reinforcement size and spacing in the Boundary Element
B.E.-L When Boundary Element is necessary, the required length of Boundary Element.
Not Use
ACI318-08/11 Updates
14 / 14
RC Wall
Wall Design Result Report
Graphic Report
Detail Report
Summary Report
ACI318-08/11 Updates
15 / 14
RC Wall
Display Option
Display options are added for the input data and results of Boundary Element.
16 / 14
Wind Loads
Wind Load Code IBC2009 (ASCE-05)
Loads>Lateral Loads >Wind Loads.
17 / 14
Wind Loads
Wind Load Code IBC2012 (ASCE-10)
Loads>Lateral Loads >Wind Loads.
18 / 14
Seismic Load
Seismic Load Code IBC2009 (ASCE-05)
Loads>Lateral Loads >Seismic Load.
19 / 14
Seismic Load
Seismic Load Code IBC2012(ASCE-10)
Loads>Lateral Loads >Seismic Load.
20 / 14
21 / 14
Tunnel
Slope
Intuitive
SoilWorks
Seepage
Dynamic
Tunnel Module
Construction Stage Analysis Static Nonlinear Analysis Coupled Analysis Parametric Analysis Effects on Tunnel and Adjacent structures
Foundation Module
Perform simultaneous settlement checks for various foundation types & sizes p-y Analysis Pile Head Conditions
Dynamic Module
1-D Ground Response Analysis 2-D SSI Analysis Time History Analysis Response Spectrum Analysis Maximum vibration in adjacent structures Maximum displacement of structures due to seismic waves
Slope Module
Simultaneous analyses for dry/rainy seasons Perform SRM, SAM and LEM Analysis in one model LEM Analysis coupled with Seepage and Soft Ground Analyses
Seepage Module
Steady State / Transient State Seepage Analysis Upward/downward Seepage forces Coupled Analysis
Why SoilWorks SoilWorks represents the complete 2D FEA solution to geo-structural proble ms for structural and geotechnical engineers 7 Smart Features for easy modeling , analysis and reviewing results Intuitive Graphic user interface
Streamlining Design Process (Repetition eliminated) - Parametric Analysis
Eliminate the blind spot between structural & geotechnical engineers Increase productivity into a new dimension Expand your business areas & Secure more projects Rely on the Midas support team as a part of your project team We build our success on your success
midas Gen
Webinar
Date: May 15, 2012
Gen
Midas Gen
Webinar Schedule
Webinar Schedule
May
Basic
Advanced
Product Introduction & General Use Time History Analysis Product Introduction & General Use Construction Stage Analysis & Column Shortening
June
Basic Advanced
Midas Gen
Introduction
Midas Gen
Introduction
Versatility
Specialty Structures Applications
Cranes
Pressure Vessels Machine Structures Underground Structures
Seoul World Cup Stadium JeonJu World Cup Stadium DeaJeon World Cup Stadium
USA Pavilion
China Pavilion
German Pavilion
Midas Gen
Introduction
Analysis Types
Static Analysis Dynamic Analysis Free Vibration Analysis Response Spectrum Analysis Time History Analysis Geometric Nonlinear Analysis P-Delta Analysis Large Displacement Analysis Material Nonlinear Analysis Structural Masonry Analysis Linear Buckling Analysis Lateral Torsional Buckling Heat Transfer Analysis Time Transient Analysis Heat of Hydration Analysis Thermo-elastic Analysis Maturity, Creep, Shrinkage, Pipe Cooling Construction Stage Analysis Time Dependent Material Column Shortening Analysis (Elastic/Inelastic) Pushover Analysis FEMA, Eurocode, Multi-linear hinge properties RC, Steel, SRC, Masonry material types Boundary Nonlinear Time History Analysis Damper, Isolator, Gap, Hook Inelastic Time History Analysis Other Analysis Unknown Forces by Optimization Moving load analysis Settlement analysis
[Pushover analysis]
Midas Gen
Introduction
Midas Gen
Introduction
[Table Windows]
Midas Gen
Introduction
[Transparency]
[Walk Through]
Midas Gen
Modeling
Modeling 1) File Manipulation 2) Dxf Import 3) Structure Wizard 4) Define Material Properties 5) Define Section properties
6) Create Elements
Midas Gen
Modeling
Direct Data Transfer with Tekla Structures, Revit Structure & STAAD Import/Export (AutoCAD DXF, MSC.Nastran, STAAD, SAP2000, etc.)
Tekla Structure
Revit Structure
[Tekla interface]
[Revit interface]
Midas Gen
Modeling
Merged
Midas Gen
Modeling
Structure Wizard
[Arch Wizard]
[Shell Wizard]
[Truss Wizard]
[Plate Wizard]
Midas Gen
Modeling
Select Volume
[Selections Methods]
[Activities Menu]
Select Identity
Active Identity
[User coordinates]
[Unit Conversion]
[Unlimited Undo/Redo]
Midas Gen
Modeling
Creep/Shrinkage - Eurocode, ACI, CEB-FIP, PCA Comp. Strength - Eurocode, ACI, CEB-FIP, Ohzagi
Midas Gen
Modeling
Midas Gen
Building Generation
Building Generation
Defining ground level for generating static seismic and wind loads Building generation wizard
[Story Data]
Midas Gen
Modeling
[Load to Masses]
Midas Gen
Boundary Conditions
Boundary Conditions
Midas Gen
Boundary Conditions
[Floor Diaphragm]
Supports
Elastic Link
Linear Constraints
Midas Gen
Boundary Conditions
[Fixed Support]
[Isolator]
Midas Gen
Boundary Conditions
Midas Gen
Loading
Loading 1) Applicable loads 2) Floor Load and Pressure Loads 3) Static Wind and Seismic Loads 4)Dynamic Loads 5) Hydrostatic pressure Loads
Midas Gen
Loading
Applicable Loads
midas Gen enables us to specify all types of nodal, element, point, surface, dynamic, prestressing and thermal loads encountered in practice. Load combination based on the various design codes Load group generation of load case from load combinations
Prescribed Displacement
Elements Beam Load Line Beam Load
Floor Load
Prestress Beam Load Pretension Load Tendon Prestress Load
[Floor Load]
Midas Gen
Loading
[Floor Load]
[Pressure Load]
Midas Gen
Loading
Midas Gen
Loading
Dynamic Loads
Response spectrum load Time history load (earthquake records, Heel drop)
Midas Gen
Loading
Midas Gen
Analysis Results
Analysis Results 1) Beam Results 2) Contours 3) Vibration Mode Shape 4) Special Plot and Graphs 5) Cutting Plane stresses
6) Table Output
Midas Gen
Analysis Results
Beam Results
Midas Gen
Analysis Results
Analysis Results
Displacement Contour
Midas Gen
Analysis Results
Midas Gen
Analysis Results
Midas Gen
Analysis Results
Midas Gen
Analysis Results
Table Output
Convenient features of checking results in table formats Spread sheets provided for all analysis and design results Powerful filtering in conjunction with various selection functions Various sorting methods Various editing function (Add, Modify, Group Copy, Replace, Search, etc.) Copy & Paste using Clipboard Interface with other software such as MS-Excel, etc.
Midas Gen
Analysis Results
Torsional Irregularity Check Stiffness Irregularity Check (Soft Story) Weight Irregularity Check Capacity Irregularity Check (Weak Story)
Module 2 Module 1
Module 3
Midas Gen
Introduction
Midas Gen
Design Capabilities
Design Capabilities 1) Available Design Code 2) Concrete & Steel Design Feature 3) Optimal Design Feature 4) Capacity Design Feature 5) Meshed Slab and Wall Design
Midas Gen
Design Capabilities
RC Design
ACI318
Eurocode 2, Eurocode 8 BS8110 IS:456 & IS:13920 CSA-A23.3
Steel Design
AISC-LRFD
AISC-ASD AISI-CFSD Eurocode 3 BS5950
SRC Design
SSRC79
JGJ138 CECS28 AIJ-SRC TWN-SRC
GB50010
AIJ-WSD TWN-USD AIK-USD, WSD KSCE-USD
IS:800
CSA-S16-01 GBJ17, GB50017 AIJ-ASD TWN-ASD, LSD
AIK-SRC
KSSC-CFT Footing Design ACI318 BS8110
KCI-USD
Slab Design
Eurocode 2
Midas Gen
Design Capabilities
Midas Gen
Design Capabilities
section dimensions automatically for the minimum sectional area (minimum weights) satisfying
the specified design standard through verifying strength ratio (or stress ratio) in iterative analysis.
Midas Gen
Design Capabilities
Midas Gen
Design Capabilities
Wall design
Midas Gen
Midas Gen
Thank You !
Thank You !