Professional Documents
Culture Documents
The product described in this book is a licensed product of NCR Corporation. EMPATH is an NCR trademark registered in the U.S. Patent and Trademark Office LSI is a registered trademark of LSI Logic Storage Systems, Inc. Microsoft, Windows, Windows NT, and Windows 2000 are registered trademarks of Microsoft Corporation Overland Data and DLT LibraryXpress are trademarks of Overland Data, Inc. RAID Manager is a registered trademark of LSI Logic Storage Systems, Inc. StorageTek is a registered trademark of Storage Technology Corporation SYMplicity Storage Manager is a registered trademark of LSI Logic Storage Systems, Inc. TERADATA is a registered trademark of NCR International, Inc. UNIX is a registered trademark in the United States and other countries, exclusively licensed through X/OPEN Company Limited WorldMark is a trademark of NCR Corporation THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN AS-IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT WILL NCR CORPORATION (NCR) BE LIABLE FOR ANY INDIRECT, DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS OR LOST SAVINGS, EVEN IF EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. The information contained in this document may contain references or cross references to features, functions, products, or services that are not announced or available in your country. Such references do not imply that NCR intends to announce such features, functions, products, or services in your country. Please consult your local NCR representative for those features, functions, products, or services available in your country. Information contained in this document may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. NCR may also make improvements or changes in the products or services described in this information at any time without notice. To maintain the quality of our products and services, we would like your comments on the accuracy, clarity, organization, and value of this document. Please e-mail: info.products@SanDiegoCA.ncr.com or write: Information Engineering NCR Corporation 17095 Via Del Campo San Diego, California 92127-1711 U.S.A. Any comments or materials (collectively referred to as Feedback) sent to NCR will be deemed non-confidential. NCR will have no obligation of any kind with respect to Feedback and will be free to use, reproduce, disclose, exhibit, display, transform, create derivative works of and distribute the Feedback and derivative works thereof without limitation on a royalty-free basis. Further, NCR will be free to use any ideas, concepts, know-how or techniques contained in such Feedback for any purpose whatsoever, including developing, manufacturing, or marketing products or services incorporating Feedback. Copyright 1999, 2000 By NCR Corporation Dayton, Ohio U.S.A. All Rights Reserved
Site Preparation
This document contains the information necessary for the preparation of a site conforming to NCR Corporation specifications. It is very important that the site complies with the requirements specified in this document, because, once the equipment has been installed, deficiencies in site preparation or the problems caused by these deficiencies are much more difficult to detect and correct. Failure to comply with these requirements or take proper steps to protect equipment against risks identified in this document may cause serious damage to the equipment and to the customer's business. In addition to the need to comply with the requirements specified, electrical wiring and mechanical systems must also comply with all relevant codes, laws, and regulations. It is important that the site be prepared by a customer or his agent who is fully conversant with the special requirements of electronic equipment. The responsibility for ensuring that the site is prepared in compliance with this document remains with the customer.
For information and guidance purposes only, a list is provided, in general terms, of these matters for which the customer is responsible. This list is not intended to be comprehensive, and in no way modifies, alters, or limits the responsibility of the customer for all aspects of adequate site preparation. NCR staff will be available to answer questions relating to the contents of this document, except where 1 The customer has been notified that a full or partial consultant service is available and/or that NCR will be willing to undertake a preliminary or final site survey, and The customer shall have entered into a formal contract with NCR for provision of the same.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
No comment, suggestion or advice offered or not offered about preparation of the site, nor any inspection of the site whether before or after preparation, is to be taken as approval of the location of the site and equipment, or of its preparation, and NCR will not be liable in respect of any comment, suggestion, or advice given by its staff, or in respect of any failure to give advice. Finally, only the customer can know the full extent of damage which may be caused to his business by reason of failure of equipment which is to be installed. For this reason it is the customer's responsibility to ascertain the extent of any such possible damage to his existing or planned business, and to effect full insurance in respect of it.
Customer Responsibilities
The customer must do or provide the following: When required by NCR, provide the NCR customer service representative with appropriate drawings that indicate: Location of the equipment Site wiring (power and signal, paths and lengths) Location of other equipment capable of generating electrical noise, electromagnetic interference, heat, etc. Make building alterations necessary to meet wiring and other site requirements. Provide and install all communications cables, wall jacks, special connectors, and associated hardware. Make sure all applicable codes, regulations, and laws (including, but not limited to, electrical, building, safety, and health) are met. Provide and install auxiliary power or other equipment as required. Provide storage or service areas as required. Make sure the environmental requirements of the system/unit are met. Provide floor coverings and environmental systems that limit or control static electricity build-up and discharge.
ii
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Note: This user guide covers both Windows NT 4.0 Server Enterprise Edition (EE), and Windows 2000 Advanced Server version. Throughout this book, all references to Windows also applies to the Windows NT and Windows 2000, unless otherwise specified.
This site preparation publication describes the site requirements for the rack mount system. It does not describe the site preparation requirements for any peripheral devices. Refer to the appropriate peripheral publications for your system peripheral devices.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
iii
Bold
Run mktable. Use PUT to upgrade the software. Use the appropriate command in the Management <Power Controls> menu. Select <Properties> from the File menu. Enter /usr/etc/ping from the command line. Enter \winnt\system32\ping at the command line. Press the Esc key. Click the Exit button on the dialog box. Enter the system name in the System Name field. The file is in the /user/sysadm/bin directory. The file is in the \winnt\system32 directory. See the Product Guide. Do not delete this file. shutdown -i -y -g The <your-login> variable must have at least 6 characters. The run_only_with_dual_ac environmental variable must be set to yes. Floppy disk drive Hard drive CD-ROM drive Insert the CD-ROM into the CD-ROM drive. Double-click install.exe. $ <your_login> To kill a process, enter exec kill <PID> from the command line, where <PID> is the process identification number. Use the appropriate command in the Management <Power Controls> menu. Select <Properties> from the File menu. See Chapter 5, Installation Overview. See Shipping Weights in Appendix A.
Screen output User input (text that you must enter exactly as shown) Keyboard keys Screen buttons Field names Directory, file, and path names References to guides Emphasis Arguments Command string variables Environmental variables
Helvetica bold
Italic
Bulleted lists
Bulleted lists do not denote order; numbered lists denote specific order. Numbered lists denote specific order; bulleted lists do not denote order. Variables in a command string Required elements of command strings Submenus
Numbered lists
3 4
References to chapter and appendix titles References to chapter and appendix headings.
Optional elements
ls [-a] [-F]
iv
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Related Information
Related information about the 6000 NSC 6286 Fibre Channel Modular Array is available online and in additional guides and publications.
Web Sites
You may need additional information to prepare, install and configure the system. Refer to documents and information available online through NCR on the World Wide Web (WWW).
Customer Information
NCR customers may access online information through the following NCR web sites:
http://www.info.ncr.com/ http://www.ncr.com/customer_svc/support.asp NCR Information Product Library of technical documentation and user guides NCR customer resource link for technical support, information products, and training programs
http://infobahn.sandiegoca.ncr.com/coe/ http://iesvr1.sandiegoca.ncr.com/supr/
http://gspatch.sandiegoca.ncr.com http://infobahn.sandiegoca.ncr.com/ultra2/confiden.htm
http://infobahn.sandiegoca.ncr.com/sfpm/symbios/
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Publications
The most recent versions of the publications that support the 6000 NSC 6286 Fibre Channel Modular Array are maintained on the documentation web sites. The online versions of these books will be updated as necessary to reflect any changes introduced between product releases. Note: In the book numbers referenced below, the first eight characters are a unique Product ID for the book, and can be used to navigate to the book online. The most recent versions of the books are maintained on the documentation web sites.
Customer Information
For supplementary server software and system hardware platform information, the following guides are available to NCR customers:
B035-5603-090A B035-5091-040A 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Product Guide RAID Manager 5 With RDAC Release 5 For UNIX V.4 User Guide
vi
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
About this Guide Related Information 95727 104126-101 104127-101 104134-101 104139-101 104140-101 StorageTek 9730 Library Storage Module SCSI Reference Manual Overland Data, DLT Base Module Installation and User Manual Overland Data, DLT Base Module Service Manual Overland Data, DLT Base Module SCSI Specification Overland Data, DLT LibraryXpress System Installation and User Manual Overland Data, DLT LibraryXpress System Service Manual
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
vii
viii
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Contents
About this Guide Notice .................................................................................................................................. i Site Preparation.................................................................................................................. i Customer Responsibilities............................................................................................... ii Who Should Read This Guide ........................................................................................ ii Releases Covered in This Guide..................................................................................... ii What You Should Know.................................................................................................iii How To Use This Guide .................................................................................................iii Conventions Used in This Guide ..................................................................................iv Related Information ............................................................................................................ v Web Sites............................................................................................................................ v Customer Information .................................................................................................. v Field Engineer Information .......................................................................................... v Publications ......................................................................................................................vi Customer Information .................................................................................................vi Field Engineer Information .........................................................................................vi
Chapter 1: Physical Specifications and Requirements Cabinet .............................................................................................................................. 12 Description ................................................................................................................... 12 Configuration ................................................................................................................ 13 Additional Storage Features - Tape Configurations ............................................... 17 6402 Robotic Tape Library........................................................................................ 17 6404 Robotic Tape Library........................................................................................ 18 Dimensions.................................................................................................................. 110 Area Required ................................................................................................................ 112 Installation and Servicing Clearance ....................................................................... 112 Footprint ...................................................................................................................... 112 Weight and Floor Loading ........................................................................................... 115
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
ix
Contents
Cables Inside the Cabinets .......................................................................................... 22 Cables Outside the Cabinets ....................................................................................... 23 Cable Management.......................................................................................................... 24 Cable Management and Routing................................................................................ 24 Cable Length ................................................................................................................. 24 Fibre Channel Cabling and Configuration ............................................................... 25 Floor Plans ........................................................................................................................ 26 Site Layout Design..................................................................................................... 26
Chapter 3: Power Distribution and Grounding Requirements AC Input Power Distribution ........................................................................................ 32 Rack Power Options..................................................................................................... 32 Dual AC ......................................................................................................................... 32 Dual AC Input Configurations ................................................................................... 34 Site Wiring for Dual AC with UPS/UIS.................................................................... 35 Separate Power Sources............................................................................................ 35 Separate Circuit Breaker Panels............................................................................... 35 One Site UPS............................................................................................................... 35 Two Site UPSs ............................................................................................................ 35 AC Wiring Diagrams ................................................................................................... 36 Nameplate Ratings ..................................................................................................... 311 UIS.............................................................................................................................. 311 UPS............................................................................................................................. 311 System AC Box......................................................................................................... 311 Power Consumption and Dissipation ..................................................................... 312 Modules..................................................................................................................... 312 Cabinet ...................................................................................................................... 313 Input Power Cords, Plugs, and Receptacles ........................................................... 314 UIS Power Cords ..................................................................................................... 314 UIS Power Plugs and Receptacles ......................................................................... 314 UPS Power Cords .................................................................................................... 315 UPS Power Plugs and Receptacles........................................................................ 315 AC Box Power Plugs and Receptacles.................................................................. 316 UPS and AC Box Receptacles................................................................................. 316 Grounding ...................................................................................................................... 317 Grounding Requirements.......................................................................................... 317 Grounding Conductor ............................................................................................... 317 Power Quality ................................................................................................................ 318 Acceptable Input Power ............................................................................................ 318 AC Power Line Transient Protection ....................................................................... 318 Power Outage.............................................................................................................. 318
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Contents
Emergency Power Off (EPO) ....................................................................................... 319 Switch Requirements ................................................................................................. 319 Cable Requirements ................................................................................................... 320 UPS and UIS Features and Specifications.................................................................. 321 UPS Features and Specifications .............................................................................. 321 UPS Input Selector (UIS) Features and Specifications .......................................... 321
Chapter 4: Environmental Specifications and Requirements Temperature and Humidity........................................................................................... 42 Requirements ................................................................................................................ 42 Precautions .................................................................................................................... 42 Optimum Performance ................................................................................................ 43 Other Environmental Specifications and Requirements ........................................... 44 Barometric Pressure ..................................................................................................... 44 Air Flow ......................................................................................................................... 44 Operational Vibration Limits...................................................................................... 44 Acoustic Noise .............................................................................................................. 44 Thermal Characteristics ............................................................................................... 45 Electrical Characteristics.............................................................................................. 45 Static Discharge Limits ................................................................................................ 46
Chapter 5: Installation Requirements Installation Considerations ............................................................................................ 52 Shipping Dimensions and Weights ........................................................................... 52 Tools Needed ................................................................................................................ 53 Required Publications.................................................................................................. 53 Uncrating, Moving, and Stabilizing a Cabinet............................................................ 54 Uncrating Guidelines ................................................................................................... 54 Moving and Handling Requirements........................................................................ 56 Environmental Stabilization Procedure .................................................................... 56
Chapter 6: Regulatory Statements and Requirements Safety Standards .............................................................................................................. 62 EMI Emissions and Immunity .................................................................................... 62 Disclaimer...................................................................................................................... 62
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
xi
Contents
Appendix A: Site Survey Conducting a Site Survey .............................................................................................. A2 Site Survey Activities .................................................................................................. A2 Site Preparation Plan................................................................................................... A3 Site Layout Maps ............................................................................................................ A4 System Plan Drawing.................................................................................................. A4 System Layout Map..................................................................................................... A4
Appendix C: Checklists Site Preparation Checklists............................................................................................ C2 Site Preparation Specifications .................................................................................. C3 Site Preparation Checklist .......................................................................................... C4 Order Verification...................................................................................................... C14 Change Control.......................................................................................................... C15
Attachment A: Transient Protection AC Power Line Transient Protection.........................................................................AT2 Data Line Transient Protection...................................................................................AT4
Index.......................................................................................................................... Index1
xii
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
List of Figures
Figure 1-1 Figure 1-2 Figure 1-3 Figure 1-4 Figure 1-5 Figure 1-6 Figure 1-7 Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-6 Figure 3-7 Figure 3-8 Figure 3-9 Figure 5-1 Cabinet Exterior....................................................................................... 12 Typical NSC Configurations .................................................................. 15 Typical NSC Configurations .................................................................. 16 Typical NSC with Tape Library Configurations (Non-SDW) ............................................................................................ 19 Cabinet Height, Width, and Vertical Clearance ................................ 110 Footprint and Clearances for One NSC ............................................. 113 Footprint and Clearances for Four NSCs........................................... 114 UPS and UIS ............................................................................................. 32 UPS/UIS Power Distribution in an NSC ............................................. 33 Leg A and Leg B of AC Power Distribution........................................ 34 200 - 208 VAC, Single Phase Power Connections for UPS or AC Box (UPS Shown) ...................................................................... 37 220, 230, 240 VAC, Single Phase Power Connections for UPS or AC Box (UPS Shown) ...................................................................... 38 200 - 208 VAC, Single Phase Power Connections for UPS with UIS ................................................................................................. 39 220, 230, 240 VAC, Single Phase Power Connections for UPS with UIS ............................................................................................... 310 EPO Switch Daisy Chain Wiring......................................................... 320 EPO Switch Star Wiring........................................................................ 320 Installation Overview ............................................................................. 55
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
xiii
List of Figures
xiv
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
List of Tables
Table 1-1 Table 1-2 Table 1-3 Table 2-1 Table 2-2 Table 2-3 Table 3-1 Table 3-2 Table 3-3 Table 3-4 Table 3-5 Table 3-6 Table 3-7 Table 3-8 Table 3-9 Table 3-10 Table 3-11 Table 3-12 Table 4-1 Table 4-2 Table 4-3 Table 5-1 Table AT-1 Cabinet Dimensions .............................................................................. 111 Clearances for Different Cabinet Layouts.......................................... 112 NCR Storage Cabinet Weight and Floor Loading ............................ 115 Cables Inside the Cabinet....................................................................... 22 Cables Outside the Cabinet.................................................................... 23 Cable Length ............................................................................................ 25 UIS Nameplate Ratings ........................................................................ 311 Storage Cabinet UPS ............................................................................. 311 AC Box Nameplate Ratings ................................................................. 311 Module Power Consumption .............................................................. 312 Cabinet Power Consumption and Dissipation ................................. 313 UIS Power Plugs and Receptacles....................................................... 314 UPS Power Plugs and Receptacles...................................................... 315 AC Box Power Plugs and Receptacles................................................ 316 230V Output UPS: Acceptable Voltage Ranges................................. 318 230V Output UPS: Acceptable Frequency Ranges ........................... 318 UPS Specifications ................................................................................. 321 UIS Specifications .................................................................................. 321 Environmental Requirements................................................................ 42 Power Dissipation and Heat Generation ............................................. 45 Power Dissipation and Heat Generation, UPS Battery Charging ................................................................................................ 45 NCR Storage Cabinet Physical Dimensions and Weights ................. 52 AC Power Line Transient Protection ................................................. AT3
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
xv
List of Tables
xvi
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 1:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
11
Cabinet
Description
Each NCR Storage Cabinet has the following features.
Figure 1-1 Cabinet Exterior
Hinged, vented, and locking rear door Removable side panels Side (left and right) stabilizers for single, standalone cabinets (required) Optional front and back stabilizers for multiple cabinets Cable entry in floor
12
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Configuration
The 6000 NCR Storage Cabinet (NSC) with 6286 Fibre Channel Modular Arrays is a primary data storage device for the WorldMark family of server systems. There are several NCR Storage Cabinet configurations available, depending on the application and storage capacities required. The NSC utilizes the standard NCR rack dimensions, 195.6 cm (77 in.) height and 61 cm (24in.) width. The NSC is aesthetically pleasing for customers using the 4300 rack, or WorldMark Enterprise Servers. The NSC supports rackmountable disk array or tape storage products. The key features of the NSC include; Service Subsystem support, greater storage capacity, and higher availability options. The 6000 NSC offers three power-input options, all redundant. To take full advantage of redundant power the site should have two independent AC sources. The options are: Dual AC Boxes - provides two separate AC distribution paths to redundant power supplies in each of the modules installed in the cabinet. If one AC source fails, the modules in the cabinet remain operational. If both AC sources fail, the cabinet powers off immediately. Dual UPS - provides two separate AC distribution paths with cabinet resident battery backed uninterruptable power supplies (UPS). If one AC source fails, the modules in the cabinet remain operational, however power is lost on one of the redundant power supplies in each of the modules installed in the cabinet. If one of the module power supplies fail, or if the remaining UPS fails, a disk array or the entire cabinet would immediately become non-operational. If both AC sources fail, the cabinet remains operational for up to 10 minutes on battery power. This allows the cabinet to power down gracefully, and insures no data is lost in the process. Dual UPS and UIS - this option offers the highest protection against AC power loss. All of the benefits of the dual UPS option are provided, plus automatic power input switchover controlled by dual UPS Input Selectors (UIS). If one AC source fails, the modules in the cabinet remain operational. The remaining AC source is automatically connected to the UPS that lost power via the UIS, and power continues to be supplied to all of the redundant power supplies in the cabinet modules. Under these conditions, if one of the module power supplies fail, or a UPS fails, the cabinet remains operational. If both AC sources fail, the cabinet remains operational for up to 10 minutes on battery power. This allows the cabinet to power down gracefully, and insures no data is lost in the process.
The NSC is offered for use in Non-Scaleable Data Warehousing (Non-SDW) environments with no AWS support. The NSC with 6286 Fibre Channel Modular Arrays comes in various configurations. Three examples are shown below: the NSC with three 62861220 disk arrays, the NSC with two 6286-1440 disk arrays, and the NSC with one 6286-1220 and one 6286-1440 disk array.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
13
The NSC with 6286-1220 disk arrays contains one to three Model 6286-1220s The NSC with 6286-1440 disk arrays contains one or two Model 6286-1440s The combination NSC with 6286-1220 and 6286-1440 disk arrays contains one Model 6286-1220 and one Model 6286-1440
Note: The 6000 NSC is available with various disk drive capacities. Refer to the Solution Pak Information on the Knowledge Center at the following URL for detailed information. http://www.tkc.ncr.com/tkc/cxhtml/data/htm/1/areainfo.htm
14
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 1: Physical Specifications and Requirements Cabinet Figure 1-2 Typical NSC Configurations
NSC 6286 Modular Array with Three 6286-1220s NSC 6286 Modular Array with One 6286-1220 and One 6286-1440
UPS UPS
UPS UPS
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
15
Chapter 1: Physical Specifications and Requirements Cabinet Figure 1-3 Typical NSC Configurations
NSC 6286 Modular Array with One 6286-1440 NSC 6286 Modular Array with Two 6286-1440s
UPS UPS
UPS UPS
16
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Note: The 6000 NSC is available with various disk drive capacities. Refer to the Solution Pak Information on the Knowledge Center at the following URL for detailed information. http://www.tkc.ncr.com/tkc/cxhtml/data/htm/1/areainfo.htm The tape libraries are offered in non-SDW environments.
Product ID
Description
6402-0118-8090 6402-0130-8090
18-slot tape library (rack mountable) 30-slot tape library (rack mountable)
For detailed operating instructions, see the StorageTek 9730 Library Storage Module Hardware Operators Guide.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
17
Product ID
Description
1 Dr. X 10-slot DLT7000 tape library (rack mountable) 2 Dr. X 10-slot DLT7000 tape library (rack mountable) 1 Dr. X 10-slot DLT4000 tape library (rack mountable) 2 Dr. X 10-slot DLT4000 tape library (rack mountable)
For detailed operating instructions, see the Overland Data, DLT Base Module Installation and User Manual.
18
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 1: Physical Specifications and Requirements Cabinet Figure 1-4 Typical NSC with Tape Library Configurations (Non-SDW)
NSC with One 6286-1220 Disk Array and One 6404 Tape Module NSC with One 6286-1220 Disk Array and One 6402 Tape Module
StorageTek
9730
UPS UPS
UPS UPS
NSC with Two 6286-1220 Disk Array and One 6402 Tape Module
NSC with One 6286-1440 Disk Array and One 6402 Tape Module
StorageTek
StorageTek
9730
9730
UPS UPS
UPS UPS
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
19
Dimensions
The following figure shows the height, width, and vertical servicing clearance of an NCR Storage Cabinet.
Figure 1-5 Cabinet Height, Width, and Vertical Clearance
12.7 cm 5 in
195.6 cm 77 in
101.6 cm 40 in
61 cm 24 in
1 10
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Cabinets can be stand-alone or bolted together in rows. Stabilizer feet add width and depth to a stand-alone cabinet or a row of cabinets bolted together. Side stabilizer feet are required on all four corners of a stand-alone cabinet and increase its footprint width by 34.6 cm (14 in.) and its depth by 45.7 cm (18 in.). If two stand-alone cabinets are placed side-by-side, allow 36 cm (14.5 in.) between cabinets to install the side stabilizer feet. There should be at least 1.3 cm (0.5 in.) between the installed side stabilizer feet. Front and back stabilizer feet are optional for cabinets bolted together. If used, they are used on all cabinets in the row. Front and back stabilizer feet increase each cabinets footprint depth by 45.7 cm (18 inches).
The following table summarizes cabinet dimensions, and the width and depth added to a cabinet footprint when stabilizer feet are attached.
Table 1-1 Cabinet Dimensions
Feature Dimension
Total cabinet frame height Total cabinet frame width Total cabinet frame depth Cabinet width, including side stabilizer feet (on all four corners) Cabinet depth, including side stabilizer feet (on all four corners) Cabinet width, including front and back stabilizer feet Cabinet depth, including front and back stabilizer feet
195.6 cm (77 in.) 61 cm (24 in.) 101.6 cm (40 in.) 95.6 cm (38 in.) 147.3 cm (58 in.) 61 cm (24 in.) 147.3 cm (58 in.)
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
1 11
Area Required
Installation and Servicing Clearance
The following table summarizes installation and servicing clearances for a stand-alone cabinet, a set of stand-alone cabinets that are side-by-side but not bolted together, and cabinets that are bolted together (multiple cabinets). The clearances are based on the following: Space needed in front of the cabinet to service the disk array modules Space needed to open and close rear door Space needed between, in front of, and on the sides of the cabinets to install stabilizer feet
One cabinet
Side Required
17.8 cm (7 in.)
Standard: 120 cm (48 in.) Minimum: 81.3 cm (32 in.) Standard: 120 cm (48 in.) Minimum: 81.3 cm (32 in.) Standard: 120 cm (48 in.) Minimum: 81.3 cm (32 in.)
12.7 cm (5 in.)
Side Required
Ends of each row: 17.8 cm (7 in.) Between cabinets: 35.6 cm (14.5 in.)
Standard: 120 cm (48 in.) Minimum: 81.3 cm (32 in.) Standard: 120 cm (48 in.) Minimum: 81.3 cm (32 in.)
12.7 cm (5 in.)
N/A
12.7 cm (5 in.)
Footprint
The following illustrations show the footprint of one stand-alone cabinet, and multiple cabinets bolted together. Figure 1-6 shows a stand-alone storage cabinet Figure 1-7 shows four storage cabinets bolted together
The illustrations include stabilizers and recommended servicing clearances. The footprints are shown on data center tiles, which are 60 cm by 60 cm (2 ft. by 2 ft.). The illustrations include stabilizers and show the limited (minimum) servicing clearance of 81.3 cm (32 in.). The standard servicing clearance is 120 cm (48 in.).
1 12
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Note: Make sure there are enough tile cutouts in the data center tiles to accommodate external cables, including two UPS power cables, fibre channel cables, and other communication cables.
Figure 1-6 Footprint and Clearances for One NSC
81.3 cm 32 in.
22.9 cm 9 in.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
1 13
Chapter 1: Physical Specifications and Requirements Area Required Figure 1-7 Footprint and Clearances for Four NSCs
101.6 cm 40 in.
22.9 cm 9 in.
1 14
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Unit
NSC with three 6286-1220s NSC with two 6286-1440s NSC with one 6286-1220 and one 6286-1440 NSC with one 6286-1220 and one 6404 NSC with one 6286-1220 and one 6402 NSC with two 6286-1220s and one 6402 NSC with one 6286-1440 and one 6402
0.62 sq m (6.66 sq ft) 0.62 sq m (6.66 sq ft) 0.62 sq m (6.66 sq ft) 0.62 sq m (6.66 sq ft) 0.62 sq m (6.66 sq ft) 0.62 sq m (6.66 sq ft) 0.62 sq m (6.66 sq ft)
656.8 kg (1448 lb) 697.6 kg (1538 lb) 615.1 kg (1365 lb) 428.6 kg (945 lb) 475.4 kg (1048 lb) 585.1 kg (1290 lb) 543.4 kg (1198 lb)
1059 kg/sq m (217 lb/sq ft) 1125 kg/sq m (231 lb/sq ft) 992 kg/sq m (205 lb/sq ft) 691 kg/sq m (142 lb/sq ft) 767 kg/sq m (157 lb/sq ft) 944 kg/sq m (194 lb/sq ft) 876 kg/sq m (180 lb/sq ft)
0.138 kg/sq mm (197 lb/sq in) 0.147 kg/sq mm (205 lb/sq in) 0.129 kg/sq mm (185 lb/sq in) 0.090 kg/sq mm (128 lb/sq in) 0.100 kg/sq mm (142 lb/sq in) 0.123 kg/sq mm (175 lb/sq in) 0.114 kg/sq mm (163 lb/sq in)
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
1 15
1 16
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 2:
Site Layout
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
21
Communication Requirements
Cables Inside the Cabinets
The following table shows the connections between the modules in a NSC. The connections are covered in detail in the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide.
Table 2-1 Cables Inside the Cabinet
Connection Connection Points
From two SCSI Bus connectors IN on each of two Drive Modules to one of four channel connectors (Channels 1-4) on the controller From the AC inlets of each module (two AC inlets) to an appropriate UPS or AC Box outlet; one chassis power cord plugs into one UPS or AC Box chassis (leg A) and the other chassis power cord plugs into the other UPS or AC Box chassis (leg B) ** From one SCSI Bus connectors IN on each of four Drive Modules to one of four channel connectors (Channels 1-4) on the controller From the AC inlets of each module (two AC inlets) to an appropriate UPS or AC Box outlet; one chassis power cord plugs into one UPS or AC Box chassis (leg A) and the other chassis power cord plugs into the other UPS or AC Box chassis (leg B) ** In systems with UPS Input Selectors (UIS), from the AC inlets of each UPS to the AC power outlets of th appropriate UIS** In systems without UPS Input Selector (UIS), see Cables Outside the Cabinets
6402 Tape Library Power cord 6404 Tape Library Power cord
From the AC inlet of the module to an appropriate UPS or AC Box outlet From the AC inlet of the module to an appropriate UPS or AC Box outlet
** Note: Power cord cabling protocol is critical for supporting dual AC, which is a redundant power feature. See the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide for cabling information.
22
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
6286-4766 Controller for a 6286-1220 or 62861440 6402 Tape Library 6404 Tape Library UPS Power Cords
FC (Fibre Channel) cables from two controller connectors at the rear of the controller to processing nodes
SCSI (Small Computer Systems Interface) cable from the host connector to processing nodes SCSI (Small Computer Systems Interface)cable from the host connector to processing nodes In systems without UISs, from each UPS to a separate AC distribution outlet (Two outlets total) * In systems with UISs,see Cables Inside the Cabinets
From UPS Remote EPO connector to the EPO switch UPS Input Selector (UIS) In units with UPS Input Selectors (UIS), from the AC inlets of each UIS to a separate AC distribution outlet (Two outlets total) **
*Note: The 6000 NSC uses a pair of UPSs or AC Boxes (two total). Each UPS or AC Box should be plugged into a separate AC outlet, and plugged into outlets that have a separate distribution panel (AC Source). **Note: In units with UPS Input Selectors (UIS), each UIS should be plugged into a separate AC outlet, and plugged into outlets that have a separate distribution panel (AC Source).
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
23
Cable Management
Cable Management and Routing
The following cable management methods are used with the system: All cables can be routed through the bottom of a cabinet to adjacent or nonadjacent cabinets beneath the floor through cutouts in datacenter tiles. Note: The recommended size of datacenter tile cutouts is 10.2 cm x 5.2 cm (4 in. x 6 in.) or 154.8 sq. cm (24 sq.in.). Make sure there are enough tile cutouts to accommodate the appropriate external cables including two power cables, SCSI cables, and other communication cables. Place the cutouts through the datacenter tile that lies within the cabinet in the space between the chassis and the rear door. Power cables are routed beneath the floor through cutouts in datacenter tiles. Fibre Channel cables attached to nodes are routed through the nodes cable management system within the cabinet. A 78.7 cm (31 in.) service loop is required for Fibre Channel cables. Cables attached to all chassis are routed through D-rings on the sides of a cabinet.
Cable Length
Cable lengths are influenced by under-the-raised-floor cable routing. Give careful consideration to the arrangement of cabinets connected to other cabinets and to external processing devices to minimize cable length. The table that follows summarizes cable length information for cabinets that face the same direction.
24
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Horizontal length between rear of cabinets in adjacent data center rows Horizontal length between rear of cabinets two data center rows apart *Horizontal length to interconnect Fibre Channel adapters in adjacent node chassis in adjacent cabinets **Vertical length below a raised floor Length required between interconnecting 6286 disk arrays in the same cabinet Vertical length above raised floor to top 6286 arrays cable attachment location
2 m (6.5 ft.) 4 m (13 ft.) 1 m (3.25 ft.) 1 m (3.25 ft.) 1 m (3.25 ft.) 1 m (3.25 ft.)
* An intervening Fibre Channel cable is required to route cables between adjacent cabinets. Most configurations route cables vertically to cable runs under a raised floor. ** 1m (3.25 ft) is maximum; the distance is usually 0.6 m (1.95 ft.).
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
25
Floor Plans
Site Layout Design
When designing floor plans, it is important to consider future growth. Placing all nodes and disk arrays in the same row may not be optimal for future growth. Very large systems are usually organized with rows of nodes and rows of disk arrays, with disk array rows on one or both sides of the node rows. Note: Refer to Appendix A, Site Layout Maps, for a floor plan. Each square represents one 2 ft. by 2 ft. data center floor tile. The scale of thetemplates are 1/2 in. = 2 ft. and 1/4 in = 2 ft. Note: The recommended size of datacenter tile cutouts is 10.2 cm x 5.2 cm (4 in. x 6 in.) or 154.8 sq. cm (24 sq.in.).
26
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 3:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
31
Dual AC
The chassis in a storage cabinet are powered by two physical power sources; UPSs (with or without UIS) or AC Boxes. The two physical power sources are divided into two logical power sources. One physical power source (UPS or AC Box) supplies power to one AC input on a chassis, and the other physical power source supplies power to the second AC input on a chassis. This type of power distribution is called dual AC. Note: 6402 or 6404 Tape Library modules do not provide for dual AC inputs. Therefore, power redundancy is not provided.
32
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
The information in the section, Dual AC Input Configurations, describes how to set up the customers site to take full advantage of dual AC. Note: UPS and AC Box cabling protocol is critical for each chassis in a dual AC system. Cabling is covered in detail in Appendix B, Cabling Diagrams and Switch Settings in the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide. The NSC is called a dual AC system because two separate AC inlets can supply power to a cabinet: AC leg A or AC leg B. During normal operation, all current flows into the AC leg A inlet. If power is lost on AC leg A, the system switches so that all current flows into the AC leg B inlet. Because the system does not load share between AC leg A and AC leg B, dual AC can provide redundant power to the entire system. AC leg A and AC leg B power inlets for a cabinet are located on the UPSs, UPSs with UISs, or AC Box as shown in the following figures.
Figure 3-2 UPS/UIS Power Distribution in an NSC
Leg A Leg B
15
A M P
15
A M P
15
A M P
15
A M P
UIS1
Caution !
UPS 1
15
A M P
15
A M P
15
A M P
15
A M P
UIS2
Caution !
AC Power
AC Power
Since all the chassis within the cabinet receive power from both UPSs, UPSs with UIS, or AC Boxes, the cabinet will continue to operate when one AC leg is missing or turned off.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
33
Chapter 3: Power Distribution and Grounding Requirements AC Input Power Distribution Figure 3-3 Leg A and Leg B of AC Power Distribution
Service Subsystem Chassis Disk Drive Module Disk Drive Module Controller Module Disk Drive Module Disk Drive Module Controller Module Disk Drive 6285-1101 Module JBOD Disk Drive Module Controller Module UPS/AC Box UPS/AC Box
A B
A
1220 #3
B B B B B B B B B
A A A
1220 #2
A A A
1220 #1
A A
Leg A Leg B
To use the redundancy of the power subsystem with two physical (two logical) UPSs, UPSs/UISs, or AC Boxes: Use one AC feed for one logical power source, and one AC feed for the other logical power source. Use a separate breaker for each feed. Rate each AC feed for the full load of the cabinet. Note: The UPS supplies up to 2700W of power to the chassis in a cabinet, depending upon its battery backup configuration.
34
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Site wiring decisions should be made with an understanding of how the customer will benefit from the dual AC feature.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
35
AC Wiring Diagrams
Figure 3-4 through Figure 3-7 show the AC wiring diagrams for 200/208VAC and 220/230/240VAC locations. Each distribution panel should be wired as shown for each cabinet power source. The illustrations show the wiring for leg A and leg B. The ground wire in each power cord is connected to a ground terminal in the power plug, which is then connected to ground in the AC distribution panel at the customers site. 200/208VAC single phase The power connection is line-to-line single phase connection. Neutral wires are not used. 220/230/240VAC single phase The power connection is line-to-neutral single phase connection.
Caution: The power plug must be correct for international use. For more information, see Input Power Cords, Plugs, and Receptacles, later in this chapter.
36
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 3: Power Distribution and Grounding Requirements AC Input Power Distribution Figure 3-4 200 - 208 VAC, Single Phase Power Connections for UPS or AC Box (UPS Shown)
Leg A
Leg B
Distribution Panel
200 - 208 VAC I5A Circuit Breakers NEMA L6-15P Line (L1) Line (L2) Safety Ground Distribution Panel 200 - 208 VAC I5A Circuit Breakers NEMA L6-15P Line (L1) Line (L2) Safety Ground Distribution Panel 50/60 Hz UPS UPS
Leg A
Leg B
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
37
Chapter 3: Power Distribution and Grounding Requirements AC Input Power Distribution Figure 3-5 220, 230, 240 VAC, Single Phase Power Connections for UPS or AC Box (UPS Shown)
Leg A
Leg B
Distribution Panel
Distribution Panel
220/230/240 VAC I5 Circuit Breakers IEC 309 316 P6 Line Neutral Safety Ground Distribution Panel 50/60 Hz 220/230/240 VAC I5 Circuit Breakers IEC 309 316 P6 Line Neutral Safety Ground Distribution Panel 50/60 Hz UPS UPS
Leg A
Leg B
38
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 3: Power Distribution and Grounding Requirements AC Input Power Distribution Figure 3-6 200 - 208 VAC, Single Phase Power Connections for UPS with UIS
AC Source 20A Circuit Breaker AC Source 20A Circuit Breaker
Distribution Panel
Distribution Panel
15
A M P
15
A M P
15
A M P
A 15 M A M P P
15
C au tio n !
NEMA L6-20R
L L
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
39
Chapter 3: Power Distribution and Grounding Requirements AC Input Power Distribution Figure 3-7 220, 230, 240 VAC, Single Phase Power Connections for UPS with UIS
AC Source 20A Circuit Breaker AC Source 20A Circuit Breaker
Distribution Panel
Distribution Panel
15
A M P
15
A M P
15
A M P
A 15 M A M P P
15
C aution !
X = Not Used
UIS 2 IEC 309 316 R6S L IEC 309 316 P6S UPS 3
3 10
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Nameplate Ratings
The following describes system UPS, UIS, and AC Box nameplate ratings.
UIS
The following table shows the nameplate ratings for a UIS associated with a UPS. Each UIS has the same nameplate ratings.
Table 3-1 UIS Nameplate Ratings
UIS
UPS
The following table shows the nameplate ratings for a 2700W (output in Battery Mode) UPS in a 6000 NSC.
Table 3-2 Storage Cabinet UPS
2700W UPS
System AC Box
The following table shows the nameplate ratings for the 230V output voltage domestic and international AC boxes.
Table 3-3 AC Box Nameplate Ratings
Domestic AC Box International AC Box
Note: The nameplate ratings are for AC boxes that have eight receptacles, regardless of whether they are in a row or are in two groups of four. If the AC box has two groups of four receptacles per group, each receptacle is rated at 10A; each group of four must not exceed 16A.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
3 11
Modules
Table 3-4 Module Power Consumption
Description Power (Watts) Comment
6286-4766 Controller module (Includes redundant power supply, fans, cache, battery, and dual 4766 controllers) 6286-1101 Disk Module With ten 9GB drives With ten 18GB drives UPS
part of array
Consumes Power
part of array
Consumes power
2700
N/A 5000
3 12
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Cabinet
Table 3-5 Cabinet Power Consumption and Dissipation
Description of modules in cabinet Current (Amps) 208VAC Current (Amps) 230VAC Power(Watts) 208/230VAC
BTU/hour
Comment
Two 6286-1220 arrays with two UPSs Two 6286-1220 arrays with one UPSs Three 6286-1220 arrays with two UPSs Three 6286-1220 arrays with one UPSs Two 6286-1440 arrays with two UPSs Two 6286-1440 arrays with one UPSs Two 6286-1440 arrays with two AC Boxes
8.75A 6.50A
7.91A 5.88
1819W 1352W
6212 4617
Combined current going into both UPSs This assumes one of two UPSs in the cabinet is out of service Combined current going into both UPSs This assumes one of two UPSs in the cabinet is out of service Combined current going into both UPSs This assumes one of two UPSs in the cabinet is out of service Combined current going into both AC Boxes
13.13A 9.75A
11.87A 8.82A
2730W 2029W
9323 6929
14.23A 10.91A
12.92A 9.87A
2972W 2270W
10150 7752
10.45A
9.45A
2174W
7425
Note: Values are for the input to UPS or AC box from outside wall power cords Note: Values above are for voltage of 230V AC (50 or 60 Hz).
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
3 13
For international systems equiped with a UIS, the power cord for each UIS is delivered with a IEC309 316P6S plug. The plug can be used in the following countries.
Austria Luxembourg Finland Portugal Greece Switzerland Italy Denmark Norway Germany Sweden Ireland Belgium Netherlands France Spain Iceland United Kingdom
16 Amps 16 Amps
3 14
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
For international systems equiped with a UPS only, the power cord with an IEC309 plug is accepted throughout the European community, including the following countries:
15 Amps 15 Amps
NEMA L6-15P NEMA L6-15P (must replace with an IEC 309 316P6)
* The number of power receptacles (AC feeds) on site must be equal to or greater than the number of UPSs. (Each UPS has its own power cord.) If there are two UPSs, there must be at least two receptacles, one from one AC feed and one from another. The number of power receptacles may exceed the number of 6000 NSCs.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
3 15
24 Amps 24 Amps
* The number of power receptacles (AC feeds) on site must be equal to or greater than the number of AC Boxes. (Each AC Box has its own power cord.) If there are two AC Boxes, there must be at least two receptacles, one from one AC feed and one from another. The number of power receptacles may exceed the number of 6000 NSCs.
The following warnings and cautions apply when plugging modules into UPS receptacles in a rack mount system: The UPSs in a rack mount system are not intended to provide power to equipment that is not mounted in the rack. Plugging non-rack equipment into the UPS may result in an overcurrent condition or damage the external equipment. Do not plug module power cords into UPSs in adjacent racks. Items in one rack should be plugged only into UPSs that reside in that rack.
See Appendix B, Cabling Diagrams and Switch Settings in the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide for specific information about plugging modules into UPS or AC box receptacles.
3 16
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Grounding
Grounding Requirements
A cabinet has the following requirements: A cabinet connects logic reference ground to safety ground. A noise-free ground is essential for good system integrity. An insulated ground wire (required) is part of the power cord. The cabinet ground wire must be connected to the buildings service ground.
Caution: If a cabinet is installed in a closed area or part of a multi-cabinet assembly, it may require further evaluation by certification agencies. Caution: Reliable earth grounding of this equipment must be maintained.
Grounding Conductor
The following information applies to the grounding conductor: A cabinet must be grounded by a conductor that is separate from neutral. The grounding conductor must be connected to the building service ground point via the distribution panel.
Warning: High leakage currentEarth ground connection is essential before powering on the rack. The grounding conductor must be the same size as, or larger than, the power conductors to a cabinet. All on-site units communicating with a cabinet should be grounded to the terminal strip at the distribution panel to minimize system errors caused by electrical noise.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
3 17
Power Quality
Acceptable Input Power
The following tables list the acceptable nominal and operating input voltages and frequency ranges for each cabinet in a system.
Table 3-9 230V Output UPS: Acceptable Voltage Ranges
Nominal Voltage Operating Voltage
208 VAC 220 VAC 230 VAC 240 VAC Table 3-10 230V Output UPS: Acceptable Frequency Ranges
Nominal Frequency
187 to 220 VAC 198 to 233 VAC 207 to 244 VAC 216 to 254 VAC
Operating Frequency
50 Hz 60 Hz
47 to 53 Hz 57 to 63 Hz
Power Outage
The internal batteries in the UPS provide power during power outages: During a momentary outage, the UPS provides power for uninterrupted normal operation. After an extended outage, the UPS provides power for a graceful shutdown.
The UPS configuration determines how much battery time is available for normal system operation and/or graceful shutdown during an outage.
3 18
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 3: Power Distribution and Grounding Requirements Emergency Power Off (EPO)
Switch Requirements
The following requirements apply to the EPO switch: It must be a normally open, remote, push-on wall switch. Each AC feed for each leg of dual AC input could have a separate EPO switch, depending on whether local code specifies that the EPO switch should be separate. If the customers site has a mix of equipment, each system must have separate contacts in the EPO switch. The contacts should be rated at 100 VDC. Each cabinet supplies 10 mA; therefore, the battery EPO switch contact rating must be calculated. For example, with a system of 20 cabinets, a 0.2 Amp contact rating is required. The remote EPO connector on the UPS must not be connected to non-SELV circuits. Placing non-SELV voltages on the remote EPO connector creates dangerous conditions for the operator. Note: An SELV circuit is a circuit that is designed and protected so that under normal and single fault conditions the voltage between any two accessible parts, one of which may be the body or earth, does not exceed a safe value. This definition of SELV circuit differs from the term SELV as used in IEC Publication 364: Electrical Installations of Buildings. Correct (consistent) polarity must be maintained throughout the complete EPO circuit.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
3 19
Chapter 3: Power Distribution and Grounding Requirements Emergency Power Off (EPO)
Cable Requirements
The following requirements apply to the EPO cable: It must be a color-coded, 22 AWG, twisted-pair cable with class 2 insulation and a minimum rating of 600 volts. The EPO cable connects the EPO wall switch to the EPO terminals on the UPS in the rack. Correct (consistent) polarity must be maintained throughout the complete EPO circuit. The EPO connectors on the UPS may be connected in a daisy chain or a star configuration, as appropriate for the system size and for fault isolation. Up to 20 racks can be connected in a daisy chain. See the following figures for configurations.
Pin 2
Pin 2
Pin 1
Pin 1
Pin 1
Cab 001
Pin 2
Cab 002
Cab 003
Pin 1
Cab 001
Pin 2
Pin 1
EPO Switch
Cab 002
Pin 2
Pin 1
Cab 003
3 20
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 3: Power Distribution and Grounding Requirements UPS and UIS Features and Specifications
AC line voltage AC line frequency AC input power rating Load limitations Power Output Battery reserve
200-240 VAC, auto-configuring 50 / 60 Hz 3 KVA / 16A 8A per outlet; maximum 8A per group; 15A total 2700 W 6 minutes for a load of 2700W 10 minutes for load of 2250W or less
2 strings of 8 in battery tray 12 hours following a full discharge at full load 3 years for rated backup time*
Note: The customer is responsible for time and material in the replacement of the UPS battery.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
3 21
Chapter 3: Power Distribution and Grounding Requirements UPS and UIS Features and Specifications
3 22
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 4:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
41
Temperature (Dry Bulb) Relative Humidity Maximum Dew Point Maximum Operational Altitude
-40 to 60C (-40 to 140F) 5 to 95% Not Applicable 3000 m (9850 ft)
Caution: The maximum temperature for the equipment in this environment is 40 C (104 F). Although the cabinets are designed to operate within a wide environmental range, the ambient temperature within the cabinet may be greater than room ambient. Warning: Before installing and powering on the system, make sure that the environmental stabilization procedure has been completed and that the operating environment and the system meet the operational requirements. For details about the environmental stabilization procedure, see Chapter 5.
Precautions
Observe the following precautions: Installation should be such that the amount of air flow required for safe operation is not compromised. Consideration should be given to the maximum rated ambient. If rack-mount cabinets are installed in a closed or multi-unit cabinet assembly, they may require further evaluation by certification agencies.
42
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Optimum Performance
For optimum performance, do the following: Prevent continuous operation at or near the temperature and humidity limits. Prevent operation in environmental conditions that cause condensation. Maintain (as the set point) a temperature of 22 C (72 F) and a relative humidity of 50%. If the environmental controls malfunction, this may allow enough time to repair them without stopping the system. As deviations from the set point (mentioned above) increase in either direction for extended periods of time, the hardware may be exposed to the following: Low relative humidity, which can contribute to electrostatic discharge. High relative humidity, which may cause paper media to malfunction, condensation of moisture on walls and windows, or corrosion on the electronic circuits.
Due to lower atmospheric pressure and low air density at higher altitudes, the maximum dry bulb operating temperature is derated linearly by a value of 3.30 C per 1000 m (6 F per 1000 ft.) between the altitude of 500 m (1640 ft.) and 3000 m (9850 ft.).
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
43
Chapter 4: Environmental Specifications and Requirements Other Environmental Specifications and Requirements
Air Flow
The air flow in a cabinet has the following specifications and/or requirements: Each chassis in a cabinet has internal fans that provide the required, forced airflow. A minimum clearance of 0.9 m (3 ft.) is required in the front and rear of the cabinet to allow exhausted air to dissipate. A minimum clearance of 12.7 cm (5 in.) is required at the top of the cabinet to allow exhausted air to dissipate. Air flow for the entire cabinet, and all the chassis in it is front-to-back as follows: 5.7 m3/min (200 cfm) Temperature rise 8.3 C (15 F), inlet to exhaust
Acoustic Noise
Each cabinets steady-state (idle or operating), maximum noise power emission level is:
Sound Power Sound Pressure 6.0 bels 60 dBA
44
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 4: Environmental Specifications and Requirements Other Environmental Specifications and Requirements
Thermal Characteristics
Air is drawn into the cabinet through openings in the front door. Air is exhausted through the rear door of the cabinet and the top of the cabinet. Table 4-2 lists the total power dissipated and heat generated for NSC cabinets. The kW hours, BTUs per hour, and Amps are for each cabinet. To calculate power dissipated and heat generated for a specific system configuration, see the appropriate worksheet in Appendix B: Worksheets.
Table 4-2 Power Dissipation and Heat Generation
NSC Cabinet
However, heat generation and power dissipation can increase during battery charging of the UPSs. Table 4-3 shows power consumption in the most extreme casewhen all UPSs require battery charging. In these cases, cabinet current can be as high as 19A per single #12 AWG 20A plug AC cable. Once batteries are charged, levels will drop to those listed in Table 4-2.
Table 4-3 Power Dissipation and Heat Generation, UPS Battery Charging
NSC Cabinet
* If batteries have been completely drained, UPS battery power charging lasts no more than 3 hours.
Electrical Characteristics
The maximum power draw of each type of cabinet is listed in the section Thermal Characteristics in this chapter. The input has a unity power factor; therefore, the KW rating is equivalent to KVA.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
45
Chapter 4: Environmental Specifications and Requirements Other Environmental Specifications and Requirements
46
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 5:
Installation Requirements
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
51
Installation Considerations
The following sections list the shipping weight and the tools and publications needed to ensure a smooth installation once the NCR Storage Cabinet reaches the customers site. Caution: The size and weight of an NSC requires that professional movers and riggers deliver the crated units. Table 5-1 shows the dimensions and shipping weight for NSCs that are fully loaded.
NSC with three 1220s NSC with two 1440s NSC with one 1220 and one 1440 NSC with one 1220 and one 6404 NSC with one 1220 and one 6402 NSC with two 1220 and one 6402 NSC with one 1440 and one 6402
656.8 kg (1448 lb) 697.6 kg (1538 lb) 615.1 kg (1365 lb) 428.6 kg (945 lb) 475.4 kg (1048 lb) 585.1 kg (1290 lb) 543.4 kg (1198 lb)
792.9 kg (1748 lb) 833.7 kg (1838 lb) 751.2 kg (1665 lb) 564.7 kg (1245 lb) 611.5 kg (1348 lb) 721.2 kg (1590 lb) 679.5 kg (1498 lb)
195.6 cm (77 in.) 195.6 cm (77 in.) 195.6 cm (77 in.) 195.6 cm (77 in.) 195.6 cm (77 in.) 195.6 cm (77 in.) 195.6 cm (77 in.)
61 cm (24 in.) 61 cm (24 in.) 61 cm (24 in.) 61 cm (24 in.) 61 cm (24 in.) 61 cm (24 in.) 61 cm (24 in.)
101.6 cm (40 in.) 101.6 cm (40 in.) 101.6 cm (40 in.) 101.6 cm (40 in.) 101.6 cm (40 in.) 101.6 cm (40 in.) 101.6 cm (40 in.)
52
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Tools Needed
The following tools may be needed to conveniently, efficiently and properly unpack and install the cabinet system.
Metal shears Hammer #0 Philips screwdriver Knife or scissors Small adjustable wrench 1/2 inch or 13mm wrench Two 9/16 inch wrenches Large flat blade screwdriver M4 or 5/32 inch Allen wrench Large pliers or channel locks Socket wrench with 1/2 and 7/16 inch sockets 3/8 inch open-end wrench
Required Publications
The associates will need access to the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide and may need access to the other publications listed in the Preface of this document to complete the installation.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
53
Uncrating Guidelines
Use the following guidelines when uncrating the NSC: Warning: The size and weight of the cabinet systems require that professional movers and riggers deliver the crated units. Warning: The cabinet is shipped in a crate with a built-in skid under it. This skid has a clearance of 9.5 cm (3.75 in) for a forklift or pallet jack to move the unit. The increased height of the shipping container may preclude moving the unit without uncrating it. Warning: The cabinet is top heavy. Do not push it from the side. Push it from front to back. Never move the cabinet with only one person. The cabinet is shipped in a crate with a built-in skid under it. This skid has a clearance of 9.5 cm (3.75 in.) and is used when moving the crated cabinet with a forklift or pallet jack. A crated cabinet with the skid attached is very tall. After delivery, uncrate each cabinet before moving it to the customer's computer floor. One of the panels on each shipping crate is labeled RAMP. This panel is used to remove the cabinet from the shipping pallet. Locate the panel and ensure that it is not removed by the shipper. Make sure there is adequate space in front of the shipping crate so you can attach the ramp to the crate and unload the cabinet. The minimum space required in front of the crate is 3.7 m (12 ft). The width required in front of the crate is 1.8 m (6 ft). Follow the environmental stabilization procedure before moving the equipment to its on-site destination. Make sure that the correct equipment and adequate help is available to move the cabinets to their on-site destination. To protect the cabinet when moving it to its on-site destination, replace the plastic bag on the cabinet after uncrating it. Be careful the plastic bag does not impede rolling the cabinet or get under the wheels.
54
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 5: Installation Requirements Uncrating, Moving, and Stabilizing a Cabinet Figure 5-1 Installation Overview
1m 39 in.
2.1 m 82 in.
1.24 m 49 in.
Skid
Uncrating Moving
Casters
Floor Vent
Perforated Tile
Environmental Stabilization
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
55
For details about unpacking the system, see Chapter 2, Unpack system Components, in the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide.
56
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Inspect the system for condensation. Use the following guidelines to determine whether a stabilization period is necessary before installing and powering on the system.
Condition
Stabilization Period
No extreme temperature and humidity changes during transit and between the customers receiving area and on-site destination Desiccant is present No condensation is on the plastic bag or system Extreme temperature and humidity changes during transit and between the customers receiving area and on-site destination Desiccant is present Condensation is on the plastic bag or system Extreme temperature and humidity changes during transit and between the customers receiving area and on-site destination Plastic bag is missing Desiccant is missing Condensation is on the plastic bag or system
None
4 hours
8 hours
After the stabilization period, inspect the outer surface of the plastic bag, if present, and the surfaces of the system. a If there are no signs of condensation, go to the next step. b If there are still signs of condensation, allow an additional stabilization period of 2 hours. Repeat the 2-hour period, if necessary, until there are no signs of condensation. Remove the plastic bag and desiccant bags, discard them and continue to install as described in the 6000 NCR Storage Cabinet 6286 Fibre Channel Modular Array Installation and Service Guide. Note: During installation, continue to inspect the system for signs of condensation. If condensation is present, allow additional stabilization periods of 2 hours until there are no signs of condensation.
Caution: Before powering on the system, make sure that the system is free of condensation and that the on-site destination environment meets the operational requirements specified in this guide.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
57
58
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Chapter 6:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
61
Safety Standards
The NCR Storage Cabinets comply with the following safety standards: UL 1950 CSA C22.2 No. 950-M95 EC Directive 73/23/EEC EN60950 IEC 950
Disclaimer
NCR is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by NCR. The correction of interference caused by such unauthorized modifications, substitution or attachment will be the responsibility of the user.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION: Changes or modifications not expressly approved by NCR Corporation could void the users authority to operate this equipment.
62
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Translation: This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.
Canada
Le prsent appareil numrique n'met pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe A prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. Translation: This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
European Union
In accordance with meeting the requirements of EMC 89/336/ EEC (as amended 92/31/ EEC), the rack mount system meets the EMI emissions and immunity standards of CENELEC (Committee for European Electrotechnical Standardization) EN55022-1, EN50081-1, EN50082-1 and IEC (International Electrotechnical Committee) IEC 1000-4-1, 2, 3, 4. WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
63
64
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Appendix A:
Site Survey
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
A1
Use the information gathered to create a site preparation plan. This plan specifies the requirements needed to prepare the site and educate the customer for the new NCR Storage Cabinet. The CFTeam is responsible for ensuring that all applicable NCR service products are addressed. The CFTeam returns to the customer with a proposal identifying the appropriate site preparation, hardware, software, application, and NCR support services, and secures the customer's order. Once an order is signed specifying installation services, the site preparation plan is prepared.
A2
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
The site CEs assist the CFTeam and the customer by defining and explaining the requirements, but it is the customer's responsibility to see that all the site requirements are met before the installation of the system. Customers may choose to have NCR oversee the site preparation, or they may choose to do so themselves. An element of a rack mount system site preparation plan is a site preparation specification that is supplied to the contractors. The specification contains specific requirements for each site. These requirements must be met before the system can be installed. A blank form is provided in this appendix. The CFTeam leader will meet with the contractor to explain all rack mount system requirements. The team leader will periodically check the work performed, using the site preparation checklist given in this appendix and report any deficiencies. A final inspection is required at the completion of the job. There also could be a need for architects and engineers, due to size or complexity of the plan. The CFTeam Manager must ensure that prerequisite training has been accomplished. The field organization must have sufficient knowledge to effectively work with the general contractor or subcontractors to complete the work on time and within budget. NCR may or may not act as general contractor depending on the installation contract, local laws and regulations.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
A3
A4
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
A5
A6
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Appendix B:
Worksheets
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
B1
Fill in the worksheets with the correct data for each unit in your system. (Refer to the appropriate system site preparation publications for the necessary data for each system.) Enter the number of like units and multiply to determine the totals for each type of unit. Total the unit total columns to determine the system total.
Weights and Floor Loading Worksheet Unit Footprint Area Sq. m (Sq ft) Installed Weight Kg (lb) Distributed Floor Load Kg/Sq m (Lb/Sq ft)
System Totals:
B2
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
AC Power Worksheet Unit L1 Amps /Unit L2 L3 Kva / Unit Amps / Unit No. of Units L1 Amps Total L2 L3 Amps Total Kva Total
System Totals:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
B3
Thermal Control Data Worksheet Unit BTU / Hr / Unit No. of Units Total BTU / Hr
System Total:
B4
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Appendix C:
Checklists
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C1
C2
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
NCR Rep
Date
Customer
Date
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C3
C4
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Samples of the following checklists are provided for use from the time of site survey through the final site preparation verification: General AC wiring Computer room AC distribution AC distribution (other than computer room) AC / DC routing Miscellaneous information Computing equipment Configuration, hard / soft, power fail, system printer, streamer tests Communications
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C5
Date: Floor:
Remarks
Check building voltage Check neutral line with respect to ground Compare breaker rating to spec Verify number of breakers to spec Breakers labeled to requirements Labeling of AC cables after breakers Computer power source connected to earth ground Breaker boxes connected to ground Identification label of breaker box Check continuity earth ground to outlet Check earth ground source Check presence of breaker box keys Check electrical distribution plans Check presence of surge suppressors Remarks: Inspection Performed by:
C6
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Date: Floor:
Test Description Compare physical layout to site survey Presence of surge suppressors Is quantity of breakers correct Is breaker rating correct Breakers box connected to ground Breakers labeled according to requirement Labeling of AC cables after breakers Labeling of computer earth ground Conformity of breaker boxes to specs: Presence of lock box Presence of detailed plans of boxes Identification of boxes with labels Remarks:
OK
Out of Specs
Remarks
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C7
Date: Floor:
Remarks
Compare physical layout to site survey Presence of surge suppressors Is quantity of breakers correct Is breaker rating correct Breakers box connected to ground Breakers labeled according to requirement Labeling of AC cables after breakers Labeling of computer earth ground Conformity of breaker boxes to specs: Presence of lock box Presence of detailed plans of boxes Identification of boxes with labels Remarks:
C8
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Date: Floor:
Remarks
Check logic wiring starting at box Check labeling of AC/DC receptacles Check conformity of routing and types of conduits, types of cables used, compared with room plans Check AC voltage drop on branch circuits Check power on of all equipment: printers, terminals, etc.
Remarks:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C9
Date: Floor:
Remarks
Conformity to conduit plans Conformity to material uses (metal, plastic, etc.) Check continuity of earth ground Check consistency of labeling Is room temperature within specification Is temperature stable Is relative humidity within specification Is relative humidity stable
Remarks:
C 10
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Date: Floor:
Remarks
Visual verification of quantity and designation of the installed items compared to description Quality of workmanship along with the quality of placement of peripherals During this test, equipment will be powered on: System CRTs... printers... Checking of labels: Labeling of cables (AC) Labeling of boxes Identification of AC / data plugs Spare plugs identification Adherence of data cables to spec Earth ground to boxes Reflectometer test of data cables Remarks:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C 11
Date: Floor:
Configuration, Hard / Soft, Power Fail, System Printer, Streamer Tests Test Description OK Out of Specs Remarks
Remarks:
C 12
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Date: Floor:
Remarks
UNIX to UNIX NT to NT Connection to primary location Connection to secondary location Connection to tertiary location
Remarks:
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C 13
Order Verification
During the preliminary installation planning phase, the customer's order is verified. Order verification allows the Customer Focused Team, System Support Representatives, and the Technical Account Manager to double check the system order. They can verify all the proper hardware, operating system software, and network-associated hardware and software is ordered. Order verification is a courtesy check in an attempt to avoid any unnecessary delays once the system has been received. A sample order verification checklist follows.
Order Verification Checklist Check Notes
Hardware Configuration Hardware Features Cable Quantity & Types Cable Lengths Operating System Configuration Operating System Release Correct Publications Additional Notes
C 14
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Change Control
The CFTeam leader must supply the procedures to allow for making changes to the preparation plan. To avoid problems during the project, the procedures for making changes must be agreed to and signed-off by both the customer and NCR before the project begins. If either party wishes to make a change to the project, the change will be discussed at a joint meeting. The financial, resource, and timing considerations of the change will be examined. The parties will agree to approve, disapprove, or modify the change. A sample change control document follows.
Change Control Document
Project Name: Date: Reason: Change Request: Request Details: Solution: Solution Details: Module / Version / Point Release Developer Date Changed Date Integrated / / Originator: Ref. #:
Date
Name of project for which change is being amended. Project number as assigned by Project Manager. Date that change request form is filed. Customer reference / name if generated by external source, NCR reference / name if generated internally. An internally generated number, controlled by the Project Manager.
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
C 15
Appendix C: Checklists Site Preparation Checklists Reason Insert applicable reason for change (for example, Specification Change, Program Error, Regulations, Enhancements). Enter module reference and up to 40 characters of (brief) description. Expand problem description so that it is meaningful to all members of the project team. Enter up to 40 characters of the (brief) problem resolution. Describe, in detail, the solution to the problem. Include other areas of the system which might be affected by this change. To be updated under the control of the Project Manager. Name of the person responsible for the amendment and subsequent module testing. Enter date of amendment and acceptance for system testing. Signatures of responsible parties for customer and NCR. Signifies the acceptance of the change and its resultant solution.
Change Request Request Detail Solution Solution Detail Module / Version Point Release Developer Dates Changes Integrated Approvals
C 16
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Attachment A:
Transient Protection
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
AT 1
AT 2
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Attachment A: Transient Protection AC Power Line Transient Protection Table AT-1 AC Power Line Transient Protection
Location Category Comparable to IEC No 664 Category Transient
Waveform B = Major feeders, short branch circuits, and load centers III Volts = 1.2 x 50s Current = 8 x 20S and 0.5s Rise - 100 kHz Ringwave C = Service Entrance and run to load center IV Volts = 1.2 x 50s Current = 8 x 20s
Amplitudes 6 kV 3 kA
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
AT 3
Note: In certain countries, NCR Corporation is able to supply both power and data line transient suppressors as well as a comprehensive line of power conditioning equipment. For application data, contact your NCR Customer Services Division Representative.
AT 4
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Index
Numerics 6286-1220 13 6286-1440 13 6402 17 6402 tape library 32 6404 18 6404 tape library 32 footprint 112 installation clearance 112 installation dimensions 52 installation weight 52 servicing clearance 112 shipping dimensions 52 shipping weight 52 weight 115 cabinet, installation handling requirements 56 installation clearance 54 cabinet, safety regulations 62 cable length 24 cables 22, 23 routing 24 cabling SCSI 25 certification, safety 62 Change control document C2 checklists, site preparation C2 clearance installation 112 servicing 112 clearances installation 54 configuration dual AC 34 configurations cabinet 13 tape 17 consumption, power 312 current 311 current See nameplate ratings cutouts 24
A AC dual 32 AC Box 34 AC box nameplate ratings 311 power plug 315, 316 rated current 315, 316 receptacles 316 AC power outage 318 plugs, inlets, receptacles 315, 316 AC power line transient protection 318 AC Power Worksheet B2 AC wiring 36 acoustic noise 44 air flow 44, 45
C cabinet 13 additional features 17 area required 112 cables inside 22 cables outside 23 configuration 13 description 12 floor loading 115
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Index 1
Index
E electrical characteristics 45 Emergency Power Off 319 environmental specifications 41 acoustic noise 44 air flow 44, 45 barometric pressure 44 electrical characteristics 45 static discharge 46 temperature and humidity 42 thermal characteristics 45 environmental stabilization procedure 54, 56 EPO switch cable requirements 320 daisy chaining 320 location 319 requirements 319 star wiring 320
N nameplate ratings AC box 311 system, expansion, extender cabinets 311 UPS 311 node chassis cable routing 24 noise power emission level 44 nominal frequency 318 nominal voltage 318 nominal voltage See nameplate ratings
F features cabinet 17 floor loading cabinet 115 Floor Plan template 26 floor plans 26 footprint cabinet 112 frequency 311 frequency See nameplate ratings frequency, operating 318 O operating frequency 318 operating voltage 318 optimum performance temperature and humidity 43 Order verification checklist C2 outlets 315, 316
P power 311 power cables, routing 24 power consumption 312 power dissipation 45 power distribution 32 power inlet 315, 316 power outage 318 power plugs 315, 316 power plugs and receptacles system, expansion, extender cabinets 314 power quality acceptable input power 318 power outage 318 power receptacles 315, 316 power See nameplate ratings power supplied 311
Index 2
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Index
R rack, environmenal specifications 42 rated current 315, 316 receptacles AC box 316 customer site 315, 316 UPS 316 regulatory statements and requirements safety 62 requirements grounding 32, 317 grounding conductor 317 power distribution 32
altitude and maximum dry bulb 43 optimum performance 43 Template floor plan 26 thermal characteristics 45 Thermal Control Worksheet B2 tools needed 53 transient protection 318
U UPS 34 and power outage 318 batteries 318 heat generation 45 nameplate ratings 311 power dissipation 45 power inlet (230V only) 315, 316 power plug 315, 316 rack-mounted 321 rated current 315, 316 receptacles 316 receptacles, warnings and cautions 316 remote EPO connector 319 specifications 321 voltage See nameplate ratings
S safety regulations 62 SCSI cables routing 24 servicing clearance 112 Site Layout 26 site preparation checklists C2 worksheets B2 Site preparation checklist C2 site preparation plan A3 Site preparation specifications C2 site survey conducting A2 layout maps A4 specifications, environmental 41 Stabilizer 111 stabilizer 115 stabilizers 12 static discharge 46 system description 13 power plugs and receptacles 314 system layout map A4 system plan drawing A4
W weight cabinet 115 Weights and Floor Loading Worksheet B2 wiring AC 36 diagrams 36 worksheets B2 site preparation B2
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide
Index 3
Index
Index 4
6000 NSC 6286 Fibre Channel Modular Array Site Preparation Guide