Professional Documents
Culture Documents
This document lists both new and enhanced product functionality for the current release.
Infrastructure
V4 Integration
Mechanical Design
Part Design Interactive Drafting 2D Layout for 3D Design Sketcher Wireframe and Surface
Product Synthesis
Knowledge Advisor
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
V4 Integration
New Functionalities
Migrating Draw Data from .Model Files to a Layout Explains the process of migrating drawing data from .model files to a layout.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Part Design
Enhanced Functionality Creating Rectangular Patterns
You can create rectangular pattern with the staggered configuration.
Creating Shells
A new Propagate faces to remove check box is available for creating a shell.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Interactive Drafting
Enhanced Functionality Creating Equidistant Points
You can now create equidistant points by selecting two isolated points rather than two points on a curve.
Creating Corners
You can now keep the radius value when creating a corner and use it by default for other corner creations.
Smartpicking
You can now specify the position of an offset curve by taking into account the limiting point of an existing curve.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Creating Corners
You can now keep the radius value when creating a corner and use it by default for other corner creations.
Smartpicking
You can now specify the position of an offset curve by taking into account the limiting point of an existing curve.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Sketcher
Enhanced Functionality Intersecting 3D Elements with the Sketch Plane
The Intersection dialog box is available with the Element(s) to intersect, Near element and No Canonical Curve options.
Offsetting 3D Geometry
The No canonical curve detection option is available in the Sketch tools toolbar.
Creating Corners
You can now keep the radius value when creating a corner and use it by default for other corner creations.
SmartPicking
You can now
specify the position of an offset curve by taking into account the limiting point of an existing curve.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Creating Silhouettes
This new functionality lets you create silhouettes using reflect lines, extraction of edges and removal of non visible areas of the contour capabilities.
Creating Chamfers
This new functionality lets you create two chamfers by selecting two edges.
Trimming Geometry
You can now trim the surfaces using the Pieces mode.
Unfolding a Surface
You can now visualize the distortion in the 3D view. A new Distortion color maps area has been added. The check boxes in this area enable you to display distortions of the surface to unfold and unfolded surface.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Stacking Commands You can remove the unused contextual features by selecting the Remove Unused Contextual Features contextual
command. The stacked commands are organized in two levels during edition.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview
Knowledge Advisor
Enhanced Functionality V6 Knowledge features are V5 compatible
Now, the Knowledge features Viz. Parameters, Formulas, Equivalent dimensions, Laws, KWA rules, KWA checks, Set of equations, Reactions, Relation sets, Parameter sets, Actions, VB actions, Optimizations, KWE rules, checks, and rulesets embedded in the V6 representation can be fully retrieved in V5.
Dassault Systemes - CATIA Version 5-6 Release 2012 - Product Enhancement Overview