Professional Documents
Culture Documents
Constraints
1. An Architectural Scale of 3/8 = 1 must be used. 2. Use letters or numbers to identify the following components on your model: a. Joists d. Sole Plate g. Header j. Gypsum Board m. Vapor Barrier p. Shingles 3. A table must be included that describes the purpose, materials, and configurations of each component. 4. Inside trusses are W trusses placed 2 OC. The outside truss needs to be a Gable Truss. 5. Typical dimensions and materials must be represented. 6. Lay out your model as described by the teacher or design your own layout and gain teacher approval before using it. 7. The maximum dimension for your footprint is 18, and the minimum is 12. b. Girders e. Stud h. Sill k. Insulation n. Siding c. SubFloor f. Top Plate i. Rafters / Truss l. Sheathing o. Tar Paper
Criteria
Accurate and realistic representation of components o size, materials, configuration Clean construction All components built in proportion
TOTAL OF 100 POINTS (will start with 1 point) Topics 33 points Table is professional and information is accurate, clear, and thorough; Proper spelling and grammar is used AND All required information is documented / reflected thoroughly, clearly, and accurately 28 points 23 points 18 points
Much of the Table is accurate but Some information information is more professionalism is is confusing / confusing / missing needed missing OR OR Information is More detail is needed incorrect
Model is professional, creative, and built with clean construction AND All constraints are met AND Model is correctly proportioned AND Model depicts style well
Model is acceptable but some improvement is needed with professionalism or creativity OR Model is not correctly proportioned
Structural Components
Several components are Required components are Proportions and scale not depicted accurately represented need minor accurately or with and labeled in model improvements enough detail (with proper scale, OR OR materials, and One or two components Three or four configuration) are not featured components are not featured
Labels are not included on the physical model OR Four to six components are not featured
* If the minimum level is not achieved for a criterion, no points will be accumulated for that row.
16 Wall
15 Wall
10
Bedroom 5 5
10
5 Patio door
15
29 Wall