Professional Documents
Culture Documents
ydraulics
a u d r y
Hydrostatic Transaxles
h y d r a u l i c
We
S
Solutions
o l u t i o n s
Manufacture
Hydrostatic Transaxles
Eaton Transaxles
Eaton hydrostatic transaxles have integral pump(s), motor(s) and axle housing with planetary gears using state-of-the-art materials, to provide a strong , long lasting, compact drive package.
Model 751
Hydrostatic Transaxles
Environmentally protected wet type parking / emergency brake(s), which can be used for full emergency stops in addition to the dynamic braking capability of the hydrostatic transmission. Vertical input shaft which allows use with todays popular vertical shaft engine (a horizontal input option is available). One pump two motor parallel circuit provides a hydraulic differential system with even power distribution through both wheels. 1 inch diameter axle shaft supported with ball bearings provides high axle loading capability. The Model 851 has a charge pump with a spin-on oil filter. Port connections provide for a customer supplied oil reservoir. Auxiliary function ports are available. Installation mounting points for axle, torsional load, and linkage.
Control
Shaft
Input
Shaft
Double Planetary Gears and Brake (Extended to Show Reduction and Brake)
Pump
Motor
Contents
Model 751 Features and Dimension Data Model 851 Features and Dimension Data Model 771 Features and Dimension Data Model 781 Features and Dimension Data Miscellaneous Dimensions Transaxles Axle Shaft Detail Dimensions How to Specify Desired Configuration Expansion Tank or Reservoir Connection Complementary Components Application Data Sheet Page 4- 5 6- 7 8- 9 10-11 12-13 14-15 16 17 17 18-19
Hydrostatic Transaxles
Model 751
Customer Supplied
This compact package includes one ball piston pump and two ball piston motors, each with a set of double planetary gears in a single assembly. One piece construction forms a strong frame member for the vehicle. It has a single input control.
Operating Specifications
Horsepower, Input Kw [HP] (Max. Continuous) @ 3600 RPM Speed Input Output Torque, Output Nm [lb-ft] (16:1 Final Drive) Weight Over Axle, Max kg [lb] Max. Operating Temp. C [F] Case Pressure, Max. bar [PSI] 3,1 [4.2] 3600 RPM Max. 0-110 RPM 294 [217] Continuous 413 [305] Intermittent 531 [392] Peak 900 [408] 82 C [180 F] (w/20W-20 Oil) 0,8 [12] Intermittent 0,5 [07] Continuous 1700 mL [61 oz] See Eaton Bulletin No. 3-401 Internal 6,8 [5.0]
Base Unit Description: Product Number 751-044 Includes 16:1 final drive ratio, CW input shaft rotation, vertical input orientation, environmentally protected wet type parking/emergency brake, plugged side port, 5/8 in. straight barb fitting in main cover, internal filter, externally threaded control shaft, 1 in. dia. output shafts with 1/4 in. square keyway and dump valve. See model specifications for available options page 16.
Fluid Capacities
3600 RPM Input 82C [180 F] Operating Temp. 5,7 Kw [7.6 HP] Input 4,3 Kw [5.7 HP] Input 3,1 Kw [4.2 HP] Input Peak Intermittent Continuous 0 100 50 Axle Speed (RPM) 150
Axle Braking Torque Transaxle Case Recommended Fluids
542 [400] 407 Axle [300] Torque 271 Nm [lbf ft] [200] 136 [100] 0
15 30' 15 30' Parking/Emergency Brake Included 407Nm [300 lb-ft] @ 68 kg [150 lb] input to Brake Lever 20,9 kg [46 lbs]
Brakes
Net Weight
Hydrostatic Transaxles
214,000,56 [8.425.022]
Expansion Tank Connection for 15,88 [.625] Nominal I.D. Hose 31,75 [1.250] 514,781,75 [20.267.069] 25,4 [1.00] Standard Fitting (4 Options) 165,101,09 [6.500.043]
Parking Brake
Mounting Surface
374,7 [14.75]
116,711,18 [4.595.046]
A
Linkage Mounting Points (2)
B
Axle Mounting Points (2) ( Both Sides )
Dump Valve 102mm [4 inch] Min. Dia. Pulley with 178mm [7 inch] or 203mm [8 inch] Fan
Axle Shaft
Hydrostatic Transaxles
Model 851
Customer Supplied
This compact package includes one ball piston pump with a higher displacement than the 751, 771, 781 and two ball piston motors, each with a set of double planetary gears in a single assembly. A charge pump is standard on the 851. One piece construction forms a strong frame member for the vehicle. It has a single input control.
Operating Specifications
Horsepower, Input Kw [HP] (Max. Continuous) @ 3600 RPM Speed Input Output Torque, Output Nm [lb-ft] (23:1 Final Drive) Weight Over Axle, Max. kg [lb] Max. Operating Temp. C [F] Case Pressure, Max. bar [PSI] Charge Pump Inlet Pressure 4,0 [5.4] 3900 RPM Max. 0-112 RPM @3600 RPM 439 [324] Continuous 616 [454] Intermittent 790 [583] Peak 408 [900] 82 C [180 F] (w/20W-20 Oil) 0,8 [12] Intermittent 0,5 [07] Continuous 0,8 bar Absolute [11.7 PSI A] Min. Pressure at Inlet Port under Normal Operating Conditions 2200 mL [74 oz] See Eaton Bulletin N0. 3-401 Spin-on Cartridge, External
Base Unit Description: Product Number 851-098 Includes 23:1 final drive ratio, CW input shaft rotation, vertical input orientation, environmentally protected wet type parking/emergency brake, 7/8-14 SAE o-ring ports (side and main cover), integral charge pump, L filter base with oil filter, externally threaded control shaft, 1 in. dia. output shafts with 1/4 in. square keyway and dump valve. See model specifications for available optionspage 16.
813 [600] 679 [500] 542 Axle [400] Torque 407 Nm [300] [lbf ft] 271 [200] 136 [100] 0 0
11,4 Kw [15.2 HP] Input 3600 RPM Input 82C [180F] Operating Temp. Reservoir Size 4,4 liter [1 Gallon] 6,3 Kw [8.4 HP] Input 4,0 Kw [5.4 HP] Input Peak Intermittent Continuous 100 50 Axle Speed (RPM) 150
Fluid Capacities
Transaxle Case Recommended Fluids
16,3 [12.0]
17 37' 17 37' Parking/Emergency Brake Included 507Nm [433 lb-ft] @ 68 kg [150 lb] input to Brake Lever 21,8 kg [48 lbs]
Brakes
Axle Braking Torque
Maximum Continuous Input Horsepower May Be Increased with larger Reservoir or Heat Exchanger Please Contact your Eaton Representative.
Net Weight
Hydrostatic Transaxles
282,5 [11.12]
514,781,75 [20.267.069]
102mm [4 inch] Min. Dia. Pulley with 178mm [7 inch] or 203mm [8 inch] Fan
17 mm Dia. Input Shaft CW or CCW Rotation (CW Standard) Control Shaft 76,5 [3.01] Dia.
749,3 [29.50]
330,22 1,75 [13.001 .069] 146,8 [5.78] Parking Brake 165,8 [6.53] Min. Removal Clearance Dump Valve Charge Pump Inlet Port 48,67 [1.916]
374,7 [14.75]
116,711,18 [4.595.046] Wheel/Hub Spacer Customer Supplied 68,6 [2.70] Max. 129,5 [5.10] Max. Recommended Centerline of Drive Pulley
A B
Axle Shaft
Hydrostatic Transaxles
Model 771
A-Side
These transaxles are designed for use on twin path vehicles. The Eaton ball piston pump and motor are the same as those used on the 751 transaxles. The 771 is an assembly with one pump and one motor. Two assemblies, a A-Side and B-Side, are required on each vehicle.
Base Unit Description: Product No.
B-Side
771-042 A Side 771-043 B Side Includes 23:1 final drive ratio, CW input shaft rotation, vertical input orientation, environmentally protected wet type parking/ emergency brake, plugged side port, 5/8 in. straight barb fitting in main cover, internal filter, externally threaded control shaft, 1 in. dia. output shaft with 1/4 in. square keyway and dump valve. See model specifications for available optionspage 16.
Max. Weight Over Axle kg [lb] Max. Operating Temp. C [F] Max. Case Pressure bar [PSI]
Fluid Capacities
5,5 Kw [7.4 HP] Input
Transaxle Case Recommended Fluids
15 30' (each) 15 30' (each) Parking/Emergency Brake Included (each) 507Nm [433 lb-ft] @ 68 kg [150 lb] input to Brake Lever 16,2 kg [35.8 lbs] (each)
Brake
Axle Braking Torque (Set)
Net Weight
Hydrostatic Transaxles
129,5 [5.10] Max. Recommended Centerline of Drive Pulley 116,711,18 [4.595.046] 99,4 [3.92]
A-Side
116,361,64 [4.581.065] Mounting Holes (2) 214,000,56 [8.425.022] Expansion Tank Connection for 15,88 [.625] Nominal I.D. Hose 17 mm Dia. Input Shaft CW or CCW Rotation (CW Standard)
374,7 [14.75]
461,1 [18.154]
Parking Brake
86,450,28 [3.404.011]
165,101,09 [6.500.043] Linkage Mounting Points (2) Mounting Surface 102mm [4 inch] Min. Dia. Pulley 178mm [7 inch] or 203mm [8 inch] Fan
Mounting Surface
Expansion Tank Connection for 15,88 [.625] Nominal I.D. Hose Linkage Mounting Points (2)
86,450,28 [3.404.011]
Parking Brake
165,101,09 [6.500.043] Mounting Surface 68,6 [2.70] Max. 257,391,08 [10.134.043] 116,361,64 [4.581.065] 99,4 [3.92] 116,711,18 [4.595.046] 129,5 [5.10] Max. Recommended Centerline of Drive Pulley 17 mm Dia. Input Shaft CW or CCW Rotation (CW Standard)
B-Side
81,8 [3.22] Max.
A B
Mounting Holes (2) Axle Shaft
Linkage Mounting Points (2) Control Shaft Axle Mounting Points (2) ( Both Sides )
Dump Valve
Hydrostatic Transaxles
Model 781
These transaxles are designed for use on twin path vehicles. The Eaton ball piston pumps and motors are the same as those used on the 751, 771 transaxles. The 781 is an assembly of two transaxle halves. Brake control lever A-side standard, one lever actuates both sides.
Base Unit Description: Product Number 781-017 Includes 23:1 final drive ratio, CW input shaft rotation, vertical input orientation, environmentally protected wet type parking/emergency brake operated by a single lever located on the A side, plugged side port, 5/8 in. straight barb fitting in main cover, internal filters, externally threaded control shafts, 1 in. dia. output shafts with 1/4 in. square keyway and two dump valves. See model specifications for available optionspage 16
Operating Specifications
Horsepower, Input Kw [HP] (Max. Continuous) @ Full Stroke (Max. Continuous) @ 80% Stroke Speed Input Output Axle Torque Nm [lb-ft] (23:1 Final Drive) Max. Weight Over Axle kg [lb] Max. Operating Temp. C [F] Max. Case Pressure bar [PSI] 3,4 [4.5] 5,5 [7.4] 3600 RPM Max. 0-153 RPM 439 [324] Continuous 616 [454] Intermittent 790 [583] Peak 408 [900] 82 C [180 F] (w/20W-20 Oil) 0,8 [12] Intermittent 0,5 [07] Continuous 1700 mL [59 oz] See Eaton Bulletin N0. 3-401 Internal 6,8 [5.0] (each input)
Performance Curve
813 [600] 679 [500] 542 Axle [400] Torque 407 lbf ft [300] [Nm] 271 [200] 136 [100] 0 0 Peak 100 50 Axle Speed (RPM) Intermittent 150 Continuous
11,0 Kw [14.8 HP] Input 7,6 Kw [10.2 HP] Input
Fluid Capacities
Transaxle Case (Capacity Each Side ) Recommended Fluids
15 30' 15 30' Parking/Emergency Brake Included 507Nm [433 lb-ft] @ 68 kg [150 lb] input to Brake Lever 31 kg [68 lbs]
Brakes
Axle Braking Torque
Net Weight
10
Hydrostatic Transaxles
Expansion Tank Connection (2) for 15,88 [.625] Nominal I.D. Hose
Standard Fitting (4 Options) 102mm [4 inch] Min. Dia. Pulley (2) 178mm [7 inch] Fan (2)
Linkage Mounting Points (4) 518,972,54 [20.432.100] 938,0 [36.93] 188,750,79 [7.431.031]
165,11,09 [6.500.043]
99,4 [3.92] 116,361,64 [4.581.065] Mounting Surface 257,391,08 [10.134.043] 374,7 [14.75] 68,6 [2.70] Max.
116,711,18 [4.595.046] 129,5 [5.10] Max. Recommended Centerline of Drive Pulley Wheel/Hub Spacer Customer Supplied Axle Shaft
A B Linkage Mounting Points (2) ( A and B ) Control Dump Shaft Valve 17 mm Dia. ( A and B ) (A and B ) Input Shaft CW or CCW Axle Mounting Rotation Points (2) ( A and B ( Both Sides A ) CW Standard) ( Both Sides B ) Mounting Holes (4)
11
Hydrostatic Transaxles
88,9 [3.50]
9,832,21 [.387.087] 38,1 (2) [1.50] Linkage Mounting Points (2) 5/16-18 UNC-2B Thread 12,7 [.50] Min. Full Thread Torque to 14,11,4 Nm [125 12.5 lb-in] 10,4 [.41] Min. Thread Engagement Dump Valve ( more Details Below ) 72,440,62 [2.852.025]
60,320,78 [2.375.031]
Input Shaft
Control Shaft
Input Shaft
Axle Centerline
Do Not Exceed 556 N [125 lbf] Side Load on Input Shaft at Centerline of Keyway 1/4-20 UNC-2B x 15,88 [.625] Deep Min. Full Thread Starts 3,3 [.13] Below Top of Shaft Keyway for 15,88/15,63 Dia. x 4,737/4,762 Wide [.625/.615 Dia. x .1885/.1875 Wide] Woodruff Key Per SAE J502 Specification 2,3720,127 [.0934.0050] 17,013/17,000 [.6698/.6693] Dia.
17,200,61 [6.77.024]
Note: Vehicle motion with the brake engaged must be discouraged. Use an audible warning signal or interlock to prevent operating the vehicle with 66 brake engaged. 38,1 R Applied [1.50] Brake(s) 12,7 R [.50] Off Note: Additional 22Nm [5 lb] Return Force 107,7 Required [4.24] 6,450,03 [.254.001] Dia. 58,421,13 [2.300.004] 5/16-18 UNC-2B 12,7 [.50] Min. Full Thread Axle Mounting Points ( Both Sides ) Torque to 14,11,4 Nm [12512.5 lb-in] 10,4 [.41] Min. Thread Engagement
8,640,25 [.340.010]
44,450,51 [1.750.020]
3,071,36 [.121.054] For 5/16-18 Self Tapping (thread rolling type) Screws (2) 15,88 [.625] Max. Engagement Use Only for Linkage Mounting Do Not Mount to Vehicle Frame Using these Points.
30,3 [1.19]
1,0 [.04]
49,8 [1.96]
Charge Pump Inlet Port ( where applicable or Pluged ) Reference 7/8-14 SAE O-ring Port Accepts SAE J514, -10 Fitting ( Installation Torque for Steel Fitting 606 Nm [444.4 lb-ft] )
12
Hydrostatic Transaxles
Port Plate
( For Remote Filter in Place of U or L Filter Base Transaxles with Charge Pump(s) ) 25,4 [1.00] 17,02 [.670] Axle Centerline
29
24 Adapter Port 18,571,36 [.731.053] 20,83 [.820] 9/16-18 O-ring Port (discharge to filter) 218,770,81 [8.613 .032] Axle Centerline 9/16-18 O-ring Port (return from filter) 129,54 [5.100] Dia. Bolt Circle 29 24
1/4-20 UNC-2B 14,50 [.571] Min. Full Thread (8) Torque to 14,11,4 Nm [12512.5 lb-in] 11,4 [.45] Min. Thread Engagement
29
1,715/1,385 [.0675/.0535]
Keyway for 12,70/12,95 Dia. x 3,200/3,175 Wide [.500/.510 Dia. x .1260/.1250 Wide] Wooruff Key per SAE J502 Specification
3/8 90 Barb
Plug
49,3 [4.70]
44,450,51 [1.750.020] 36,2 [1.43] 76,5 [3.01] Dia. 101,6 [4.00] 120,6 [4.75] Min. Removal Clearance 192,7 [7.59] 227,8 [8.97]
24,1 [.95]
9/16-18 O-ring Port (discharge) Location when Applicable For 5/16-18 Self Tapping ( Thread Rolling Type ) Screws 15,88 [.625] Max Thread Engagement Use Only for Linkage Mounting Do Not Mount Vehicle Frame Using these Points
99,3 [3.91]
13
Hydrostatic Transaxles
57,151,02 [2.250.040] 25,400,70 [1.000.028] 61,0 13,0 [2.40] [.51] Min. Flat Min. Flat 25,4 [1.00] Dia. Nominal
2,770,13 [.109.005]
38,10 [1.500] Hub Width Mounting Holes 10,410,25 [.410.010] Dia. Thru
19,05 [.750]
34,77 [1.369]
25,400,44 [1.000.018] ( 2 Places ) 118,472,11 [4.664.083] 4,320,25 [.170.010] 2,290,01 [.090.004] 50,800,51 [2.000.020] ( 2 Places )
125,000,33 mm Taper Per Meter [1.500.004 inch Taper Per Foot] 3/4-20 UNF-2B Slotted Hex. Nut 12,7 [.50] Thick 26,97 [1.062] Across Flats 203 Nm [150 lb-ft] Torque Plus Torque Required to Align Slotted Nut to Shaft Cross Hole Note: M18 x 1,5 Thread is also a shaft end option 57,151,02 [2.250.040] 3,96 [.156] Dia. Thru
17,27 [.680]
21,82/21,44 [.859/.844]
25,40/25,15 x 6,33/6,30 [1.000/.990 x .249/.248] Woodruff Key Per -J502 Specification 25,400,70 [1.000.028]
M10
14,99 [.590] Min. Full Thread
Control Arm Dimensions for 751, 851, 771 and 781 Transaxles
Control arms for the Transaxle must be manufactured by the customer because of the variety of control mechanisms that can be used on applications.
38,10 ,64 [1.500 .025] Taper Per 305mm [Taper Per Foot] 1,57 [.062]
14
Hydrostatic Transaxles
45
4 x 3/8-16 Self Tapping Screw 15,88 [.625] Max. Thread Engagement Transmission Mount 4 x 90
15
Hydrostatic Transaxles
Position 1,2,3
Feature Series
Option Transaxle 8,15 cm3/r [.497 in3/r] Displ. Pump Transaxle 11,9 cm3/r [.728 in3/r] Displ. Pump Single Path Transaxle Assy. 8,15 cm3/r [.497 in3/r] Displ. Pump Dual Path Transaxle Assy. 8,15 cm3/r [.497 in3/r] Displ. Pump 16:1 23:1 23:1 Steel Secondary Sun and Planet Gears Clockwise Rotation Counterclockwise Rotation Vertical (Input Shaft Vertical) Horizontal (Input Shaft Horizontal) Brake Brake Lever A Side Only (Actuates Both Sides) Brake Lever B Side Only (Actuates Both Sides) No Charge Pump Charge Pump Charge Pump High Pressure 19 bar @ 1,9 L/min @ 49 C [275 PSI @ .5 GPM @120 F] Plug 3/8 Straight Barb Fitting 7/8-14 SAE O-ring Port (Accepts SAE J514,-10 Fitting) 3/8 90 Barb Fitting 3/8 Straight Barb Fitting 7/8-14 SAE O-ring Port (Accepts SAE J514, -10 Fitting) 5/8 Straight Barb Fitting Plug Valve Cover with Filter Port Plate for Remote Filter (No Internal Filter) L Filter Base with Filter U Filter Base with Filter U Filter Base with Ports (2), Filter Port Plate with 1-7/8 12 (port and fittings for Horizontal Mount) External Threads Internal Threads 1 inch Straight Keyed Shaft (Standard) 749,3 [29.50 ] overall width (Standard 751 and 851) 461,1 [18.154] overall width (Standard 771 A-Side) 461,1 [18.154] overall width (Standard 771 B-Side) 938,0 [36.93 ] overall width (Standard 781) Dump Valve(s) No Dump Valve No Special Features Wide Neutral Band
751 Standard Standard Option Standard Option Standard Option Std Standard Option Option Standard Option Option Option Option Option Standard Option Standard Option Option Option Option Option Standard Option Standard Standard Option Standard Option
851 Standard Standard Option Standard Option Standard Option Std Standard Option Standard Standard Option Option Standard Option Option Standard Option Standard Standard Option Standard Option
771 Standard Standard Option Standard Option Standard Option Std Standard Option Option Standard Option Option Option Option Option Standard Option Standard Option Option Option Option Option Standard Option Standard Standard Standard Option Standard Option
781 Standard Standard Option Standard Option Standard Option Std Option Standard Option Option Standard Option Option Option Option Option Standard Option Standard Option Option Option Standard Option Standard Standard Option Standard Option
Final Drive Ratio Input Rotation Mounting Brake Option Charge Pump
5 6 7
10
11
12 13, 14
15 16, 17
Note: Dimensions are in millimeter, inch designation in brackets [ ]. For Optional Shaft Lengths,Tapered or Tapped Ends, Contact your Eaton Representative. Other: ( Describe Desired Product Feature Not Listed )
16
Hydrostatic Transaxles
Horizontal Mount ( Input Shaft Horizontal ) Expansion Tank Reservoir L Filter Base w/Filter
Expansion Tank
Port Plate
Complementary Components
Fan Components
P/N 106014-000 106015-000 106016-000 106017-000 Description Fan only, no sheave S/A Fan only, no sheave S/A Fan only, no sheave S/A Fan only, no sheave S/A Fan, mm [in] 5 Blade, 203 [8] 5 Blade, 203 [8] 10 Blade, 178 [7] 10 Blade, 178 [7] *Input Rotation CW CCW CW CCW Models 751, 771, 851 751, 771, 851 751, 771, 781, 851 751, 771, 781, 851
Filter Components
P/N 110007-000 105258-000 103144-000 111729-000 111726-000 Description No Bypass No Bypass No Bypass 1,72 bar (25 psi) Bypass 2 bar (29 psi) Bypass Nominal Rating 10 micron 10 micron 10 micron 10 micron 10 micron Diameter, mm [in] 76 [3.000] 94 [3.680] 77 [3.023] 77 [3.023] 76 [3.000] Length, mm [in] 67 [2.640] 83 [3.250] 120 [4.718] 120 [4.718] 67 [2.640] Models 751, 771, 781, 851 751, 771, 781, 851 751, 771, 851 751, 771, 851 751, 771, 781, 851
* Based upon input rotation to the transmission or transaxle facing input drive shaft
17
Hydrostatic Transaxles
Completed By
Vehicle Information
Lawn Tractor Vehicle Description Vehicle Weight Gross ; Max. Weight on Drive Axle lb MPH Work Range MPH Yard Tractor Garden Tractor Sulky Type Walk Behind ZTR Other
Approx. CG Height with Operator @ Gross Weight: Vehicle Ground Speed: Wheel Base Max. Desired Grade ability Wheel Slip Yes No Road Range Inch %; Coefficient of Rolling Resistance
in.
Power Source:
Diesel
Engine Make and Model Aux. Brg. Support of Axle Shaft @ Brake Type: Drum Disc Other RPM
Horsepower Rating (@Full Loaded Governed Speed) Vehicle Brakes: Dynamic Parking
Vehicle Attachments:
Mower Size Tiller Size Rotation (with or against travel) Snow Blower Size Dozer Blade Size Bucket Edger (estimated thrust) Plow Size Type Hitch In. In. ft3 lbs. In. Weight Weight Weight Weight Weight lb lb lb lb lb Continued In. In. Weight Weight lb lb
18
Hydrostatic Transaxles
Grass Bagger Attached on Tractor Bushel Capacity Trailer Type Grass Catcher Trailer Bushel Capacity Wheel Weights Input to Transaxle / Transmission
Yes
No
lb
Approximate Weight Full One Wheel Two Wheel Approximate Weight Full Other (describe)
lb
Input Rotation (Facing Input Drive Shaft): CW Input Shaft Position: Input Drive: Belt Input Drive Ratio Transaxle Control: Motor Displacement: Oil Reservoir Capacity: Oil Type Duty Cycle: Describe Operating Conditions (% time in hours per attachment) Hand Lever Vertical Direct Coupling
Foot Pedal
Other (describe)
Comments
Control Lever Length Control Lever Weigth on Shaft Dump Valve Lever Length Weight on Shaft Input Pulley Dia.
Type of:
Neutral/Brake Interlock Engine Shut-Off Input Disengagement Neutral Return Return Force Stroke Mechanism Foot Pedal, Hand Lever, Twist Grip
19
Eaton Fluid Power Group Hydraulics Business USA 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952-937-9800 Fax: 952-294-7722 www.eaton.com/hydraulics
Eaton Fluid Power Group Hydraulics Business Europe Route de la Longeraie 7 1110 Morges Switzerland Tel: +41 (0) 21 811 4600 Fax: +41 (0) 21 811 4601
Eaton Fluid Power Group Hydraulics Business Asia Pacic 11th Floor Hong Kong New World Tower 300 Huaihai Zhong Road Shanghai 200021 China Tel: 86-21-6387-9988 Fax: 86-21-6335-3912
2009 Eaton Corporation All Rights Reserved Printed in USA Document No. E-TRLD-MC002-E Supersedes 11-04-888 March 2009