Professional Documents
Culture Documents
Copyright 2007-2009 FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 211-8588, Japan. All rights reserved. Sun Microsystems, Inc. provided technical input and review on portions of this material. Sun Microsystems, Inc. and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in this document, and such products, technology and this document are protected by copyright laws, patents and other intellectual property laws and international treaties. The intellectual property rights of Sun Microsystems, Inc. and Fujitsu Limited in such products, technology and this document include, without limitation, one or more of the United States patents listed at http://www.sun.com/patents and one or more additional patents or patent applications in the United States or other countries. This document and the product and technology to which it pertains are distributed under licenses restricting their use, copying, distribution, and decompilation. No part of such product or technology, or of this document, may be reproduced in any form by any means without prior written authorization of Fujitsu Limited and Sun Microsystems, Inc., and their applicable licensors, if any. The furnishing of this document to you does not give you any rights or licenses, express or implied, with respect to the product or technology to which it pertains, and this document does not contain or represent any commitment of any kind on the part of Fujitsu Limited or Sun Microsystems, Inc., or any affiliate of either of them. This document and the product and technology described in this document may incorporate third-party intellectual property copyrighted by and/or licensed from suppliers to Fujitsu Limited and/or Sun Microsystems, Inc., including software and font technology. Per the terms of the GPL or LGPL, a copy of the source code governed by the GPL or LGPL, as applicable, is available upon request by the End User. Please contact Fujitsu Limited or Sun Microsystems, Inc This distribution may include materials developed by third parties. Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd. Sun, Sun Microsystems, the Sun logo, Java, Netra, Solaris, Sun Ray, Answerbook2, docs.sun.com, OpenBoot, and Sun Fire are trademarks or registered trademarks of Sun Microsystems, Inc., or its subsidiaries, in the U.S. and other countries. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited. All SPARC trademarks are used under license and are registered trademarks of SPARC International, Inc. in the U.S. and other countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc. SPARC64 is a trademark of SPARC International, Inc., used under license by Fujitsu Microelectronics, Inc. and Fujitsu Limited. The OPEN LOOK and Sun Graphical User Interface was developed by Sun Microsystems, Inc. for its users and licensees. Sun acknowledges the pioneering efforts of Xerox in researching and developing the concept of visual or graphical user interfaces for the computer industry. Sun holds a non-exclusive license from Xerox to the Xerox Graphical User Interface, which license also covers Suns licensees who implement OPEN LOOK GUIs and otherwise comply with Suns written license agreements. United States Government Rights - Commercial use. U.S. Government users are subject to the standard government user license agreements of Sun Microsystems, Inc. and Fujitsu Limited and the applicable provisions of the FAR and its supplements. Disclaimer: The only warranties granted by Fujitsu Limited, Sun Microsystems, Inc. or any affiliate of either of them in connection with this document or any product or technology described herein are those expressly set forth in the license agreement pursuant to which the product or technology is provided. EXCEPT AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, FUJITSU LIMITED, SUN MICROSYSTEMS, INC. AND THEIR AFFILIATES MAKE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless otherwise expressly set forth in such agreement, to the extent allowed by applicable law, in no event shall Fujitsu Limited, Sun Microsystems, Inc. or any of their affiliates have any liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for any indirect, special, incidental or consequential damages, even if advised of the possibility of such damages. DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Please Recycle
Copyright 2007-2009 FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 211-8588, Japon. Tous droits rservs. Entre et revue tecnical fournies par Sun Microsystems, Incl sur des parties de ce matriel. Sun Microsystems, Inc. et Fujitsu Limited dtiennent et contrlent toutes deux des droits de proprit intellectuelle relatifs aux produits et technologies dcrits dans ce document. De mme, ces produits, technologies et ce document sont protgs par des lois sur le copyright, des brevets, dautres lois sur la proprit intellectuelle et des traits internationaux. Les droits de proprit intellectuelle de Sun Microsystems, Inc. et Fujitsu Limited concernant ces produits, ces technologies et ce document comprennent, sans que cette liste soit exhaustive, un ou plusieurs des brevets dposs aux tats-Unis et indiqus ladresse http://www.sun.com/patents de mme quun ou plusieurs brevets ou applications brevetes supplmentaires aux tats-Unis et dans dautres pays. Ce document, le produit et les technologies affrents sont exclusivement distribus avec des licences qui en restreignent lutilisation, la copie, la distribution et la dcompilation. Aucune partie de ce produit, de ces technologies ou de ce document ne peut tre reproduite sous quelque forme que ce soit, par quelque moyen que ce soit, sans lautorisation crite pralable de Fujitsu Limited et de Sun Microsystems, Inc., et de leurs ventuels bailleurs de licence. Ce document, bien quil vous ait t fourni, ne vous confre aucun droit et aucune licence, expresses ou tacites, concernant le produit ou la technologie auxquels il se rapporte. Par ailleurs, il ne contient ni ne reprsente aucun engagement, de quelque type que ce soit, de la part de Fujitsu Limited ou de Sun Microsystems, Inc., ou des socits affilies. Ce document, et le produit et les technologies quil dcrit, peuvent inclure des droits de proprit intellectuelle de parties tierces protgs par copyright et/ou cds sous licence par des fournisseurs Fujitsu Limited et/ou Sun Microsystems, Inc., y compris des logiciels et des technologies relatives aux polices de caractres. Par limites du GPL ou du LGPL, une copie du code source rgi par le GPL ou LGPL, comme applicable, est sur demande vers la fin utilsateur disponible; veuillez contacter Fujitsu Limted ou Sun Microsystems, Inc. Cette distribution peut comprendre des composants dvelopps par des tierces parties. Des parties de ce produit pourront tre drives des systmes Berkeley BSD licencis par lUniversit de Californie. UNIX est une marque dpose aux EtatsUnis et dans dautres pays et licencie exclusivement par X/Open Company, Ltd. Sun, Sun Microsystems, le logo Sun, Java, Netra, Solaris, Sun Ray, Answerbook2, docs.sun.com, OpenBoot, et Sun Fire sont des marques de fabrique ou des marques dposes de Sun Microsystems, Inc., ou ses filiales, aux Etats-Unis et dans dautres pays. Fujitsu et le logo Fujitsu sont des marques dposes de Fujitsu Limited. Toutes les marques SPARC sont utilises sous licence et sont des marques de fabrique ou des marques dposes de SPARC International, Inc. aux Etats-Unis et dans dautres pays. Les produits portant les marques SPARC sont bass sur une architecture dveloppe par Sun Microsystems, Inc. SPARC64 est une marques dpose de SPARC International, Inc., utilise sous le permis par Fujitsu Microelectronics, Inc. et Fujitsu Limited. Linterface dutilisation graphique OPEN LOOK et Sun a t dveloppe par Sun Microsystems, Inc. pour ses utilisateurs et licencis. Sun reconnat les efforts de pionniers de Xerox pour la recherche et le dveloppement du concept des interfaces dutilisation visuelle ou graphique pour lindustrie de linformatique. Sun dtient une license non exclusive de Xerox sur linterface dutilisation graphique Xerox, cette licence couvrant galement les licencis de Sun qui mettent en place linterface dutilisation graphique OPEN LOOK et qui, en outre, se conforment aux licences crites de Sun. Droits du gouvernement amricain - logiciel commercial. Les utilisateurs du gouvernement amricain sont soumis aux contrats de licence standard de Sun Microsystems, Inc. et de Fujitsu Limited ainsi quaux clauses applicables stipules dans le FAR et ses supplments. Avis de non-responsabilit: les seules garanties octroyes par Fujitsu Limited, Sun Microsystems, Inc. ou toute socit affilie de lune ou lautre entit en rapport avec ce document ou tout produit ou toute technologie dcrit(e) dans les prsentes correspondent aux garanties expressment stipules dans le contrat de licence rgissant le produit ou la technologie fourni(e). SAUF MENTION CONTRAIRE EXPRESSMENT STIPULE DANS CE CONTRAT, FUJITSU LIMITED, SUN MICROSYSTEMS, INC. ET LES SOCITS AFFILIES REJETTENT TOUTE REPRSENTATION OU TOUTE GARANTIE, QUELLE QUEN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE PRODUIT, CETTE TECHNOLOGIE OU CE DOCUMENT, LESQUELS SONT FOURNIS EN LTAT. EN OUTRE, TOUTES LES CONDITIONS, REPRSENTATIONS ET GARANTIES EXPRESSES OU TACITES, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE LA QUALIT MARCHANDE, LAPTITUDE UNE UTILISATION PARTICULIRE OU LABSENCE DE CONTREFAON, SONT EXCLUES, DANS LA MESURE AUTORISE PAR LA LOI APPLICABLE. Sauf mention contraire expressment stipule dans ce contrat, dans la mesure autorise par la loi applicable, en aucun cas Fujitsu Limited, Sun Microsystems, Inc. ou lune de leurs filiales ne sauraient tre tenues responsables envers une quelconque partie tierce, sous quelque thorie juridique que ce soit, de tout manque gagner ou de perte de profit, de problmes dutilisation ou de perte de donnes, ou dinterruptions dactivits, ou de tout dommage indirect, spcial, secondaire ou conscutif, mme si ces entits ont t pralablement informes dune telle ventualit. LA DOCUMENTATION EST FOURNIE EN LETAT ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A LAPTITUDE A UNE UTILISATION PARTICULIERE OU A LABSENCE DE CONTREFACON.
Contents
Preface 1.
xvii 11 12 16 16
18
1.3 1.4 2.
Outline of Hardware Units That Can Be Mounted Appearance of Units 23 26 27 210 213
SPARC Enterprise M3000 Server SPARC Enterprise M4000 Server SPARC Enterprise M5000 Server
2.3.4 2.3.5 3.
216
219
33
3.3
Restriction on Mounting and Requirements for Maintenance 3.3.1 3.3.2 3.3.3 3.3.4
35
Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M3000 Server 35 Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M4000 Server 37 Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M5000 Server 39 External I/O Expansion Unit Mounting Restriction 312 313 313 314 311
3.4
When Using the Pull-out Quake-Resistant Options Kit When Using the Bolt-on Quake-Resistant Options Kit
When You Take Measures to Fixate the Rack for Quake Resistance Cable Routing Inside the Rack Other Requirements 316 316
3.5
Procedure for Mounting the SPARC Enterprise M3000 Server in the Rack 3.5.1 3.5.2 3.5.3 3.5.4 3.5.5 Components Check List 317 320 320 334 336
317
3.6
Procedure for Mounting the SPARC Enterprise M4000 Server in the Rack 3.6.1 Components Check List 340
339
vi
Proper Securing of Cables for Server Mount Conditions Safety Against Overturning Attaching the Slide Rails 343
341
344 351
Attaching the Cable Management Arm Attaching the Cable Bracket 358
Procedure for Mounting the SPARC Enterprise M5000 Server in the Rack 3.7.1 3.7.2 3.7.3 3.7.4 3.7.5 Components Check List 369 372 373
368
Installation Procedure of Cable Management Arm and Cable Bracket 81 Securing the Cables 394 399
3.8 3.9
Mounting the Server in a Rack Produced by a Company Other Than Fujitsu 100 3.9.1 3.9.2 3.9.3 3.9.4 3.9.5 Rack Stability Requirements 3101 3101
Requirements Concerning Rack Depth Rack Column Requirements Cable Routing inside the Rack Other Requirements 3105 3104 3105
4.
Considerations Regarding Carrying-in and Installation 4.1 4.2 Load Requirements of an Elevator Earthquake Preparedness Measures 41 42
41
Contents
vii
viii
Figures
FIGURE 1-1
Appearance of Base Rack of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SE-R7RC11) 110 Appearance of System Cabinet of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SE-R7RC21) 111 Appearance of Base Rack of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SE-R8RC11) 112 Appearance of System Cabinet of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SE-R8RC21) 113 Appearance of Base Rack of the Equipment Rack Model 1640 (Model Name: 19R164A1/19R-164A2) 114 Appearance of System Cabinet of the Equipment Rack Model 1640 (Model Name: 19R164B1/19R-164B2) 115 Appearance of Base Rack of the Equipment Rack Model 1620 (Model Name: 19R162A1/19R-162A2) 116 Appearance of System Cabinet of the Equipment Rack Model 1620 (Model Name: 19R162B1/19R-162B2) 117 Appearance of Base Rack of the Equipment Rack Model 1740 (Model Name: 19R174A1/19R-174A2) 118 Appearance of System Cabinet of the Equipment Rack Model 1740 (Model Name: 19R174B1/19R-174B2) 119 Floor Plan of the Equipment Rack for SPARC Enterprise Servers 121 Floor Plan of the Equipment Rack Model 1640/1620 122 Floor Plan of the Equipment Rack Model 1740 123 1
FIGURE 1-2
FIGURE 1-3
FIGURE 1-4
FIGURE 1-5
FIGURE 1-6
FIGURE 1-7
FIGURE 1-8
FIGURE 1-9
FIGURE 1-10
Floor Plan of the Equipment Rack with the Pull-out Quake-Resistant Options Kit Mounted 24
ix
FIGURE 1-15 FIGURE 1-16 FIGURE 1-17 FIGURE 2-1 FIGURE 2-2 FIGURE 2-3 FIGURE 2-4 FIGURE 2-5 FIGURE 2-6 FIGURE 2-7 FIGURE 2-8 FIGURE 2-9 FIGURE 2-10 FIGURE 2-11 FIGURE 2-12 FIGURE 2-13 FIGURE 2-14 FIGURE 2-15 FIGURE 2-16 FIGURE 3-1 FIGURE 3-2 FIGURE 3-3 FIGURE 3-4
Floor Plan of Interconnected Equipment Racks for SPARC Enterprise Servers 125 Floor Plan of Interconnected Equipment Racks Model 1640/1620 125 Floor Plan of Interconnected Equipment Racks Model 1740 126 SPARC Enterprise M3000 Server Appearance 23 SPARC Enterprise M4000 Server Appearance 24 SPARC Enterprise M5000 Server Appearance 25 Appearance of the External I/O Expansion Unit 26 Power Supply System Diagram with Redundant PSU Connection 27 Power Supply System Diagram with Dual Power Feed Connection 28 Power Supply System Diagram with Redundant PSU Connection 210 Power Supply System Diagram with Dual Power Feed Connection 211 Power Supply System Diagram with Redundant PSU Connection 213 Power Supply System Diagram with Dual Power Feed Connection 214 Power System in a Redundant Power Supply Configuration 216 Power System in a Dual-power Supply Configuration 217 For 100V for Use in Japan (Model Name: SE-R7CB11) For 200V for Use in Japan (Model Name: SE-R7CB21) 219 220 222 223
For 100V for Use outside Japan (Model Name: SE-R7CB11X) For 200V for Use outside Japan (Model Name: SE-R7CB21X) Equipment Rack Mounting Examples 32
Service Area for Cases Where a Stepladder Is Not Used 33 Service Area in Cases Where a Stepladder Is Used 34 Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M3000 Server (when the 40U rack is used) 36 Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M4000 Server (when the 40U rack is used) 38 Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M5000 Server (when the 40U rack is used) 310 External I/O Expansion Unit Mounting Restriction 311 Pulling Out the Pull-out QuakeResistant Options Kit 313 Attaching the Bolt-on Quake-Resistant Options Kit 314
FIGURE 3-5
FIGURE 3-6
FIGURE 3-10 FIGURE 3-11 FIGURE 3-12 FIGURE 3-13 FIGURE 3-14 FIGURE 3-15 FIGURE 3-16 FIGURE 3-17 FIGURE 3-18 FIGURE 3-19 FIGURE 3-20 FIGURE 3-21 FIGURE 3-22 FIGURE 3-23 FIGURE 3-24 FIGURE 3-25 FIGURE 3-26 FIGURE 3-27 FIGURE 3-28 FIGURE 3-29 FIGURE 3-30 FIGURE 3-31 FIGURE 3-32 FIGURE 3-33 FIGURE 3-34 FIGURE 3-35 FIGURE 3-36 FIGURE 3-37 FIGURE 3-38 FIGURE 3-39
Anchoring Quake-Resistant Options Kits to the Floor Example of the Affixing Rack with Level Foot 316
315
Pulling Out the Pull-out Quake-Resistant Options Kit 320 Drawing Out the Inner Slide Rails Attaching the Screw Plate 321 Attaching the Brackets 323 Attaching the Bracket-1 Attachment 324 Attaching the Bracket-2 Attachment 324 Attaching the Slide Rail Fitted with the Bracket-1 Attachment 326 Attaching the Slide Rail Fitted with the Bracket-2 Attachment 328 Attaching the Inner Slide Rails on the Server 329 321
Attaching the Inner Slide Rail Holding Bracket to the Inner Slide Rail 330 Inserting the Middle Slide Rail into the Outer Slide Rails 331 Sliding the Bearing Board 332 Inserting the Server into the Rack 333 335
Checking the Placement of the Slide Rails Securing the Server to the Rack 336
337
Pulling Out the Pull-out Quake-Resistant Options Kit 343 Attaching the Cage Nuts 344 Attaching the Screw Plates 345 346
Fixing the Slide Rails in Position on the Rack Securing the Inner Slide Rails in Place 347 Magnified view of Part A and Part B (unlocked) Magnified view of Part A and Part B (locked)
347
348 348
Bearing Board in Full Forward Position Inside the Slide Rail 349 Inserting the Inner Slide Rails 350 351
Figures
xi
FIGURE 3-40 FIGURE 3-41 FIGURE 3-42 FIGURE 3-43 FIGURE 3-44 FIGURE 3-45 FIGURE 3-46 FIGURE 3-47 FIGURE 3-48 FIGURE 3-49 FIGURE 3-50 FIGURE 3-51 FIGURE 3-52 FIGURE 3-53 FIGURE 3-54 FIGURE 3-55 FIGURE 3-56 FIGURE 3-57 FIGURE 3-58 FIGURE 3-59 FIGURE 3-60 FIGURE 3-61 FIGURE 3-62 FIGURE 3-63 FIGURE 3-64 FIGURE 3-65 FIGURE 3-66 FIGURE 3-67 FIGURE 3-68 FIGURE 3-69
Securing the Cable Management Arm with Screws 352 Unlock the Slide Rail 353 Securing the Server to the Rack 354 355
Installing End Caps on the SPARC Enterprise M4000 Slide Rails Cable Holder on the Rear Right of the Rack 356
Status of Cables When the Server Pulled Out 357 Status of Cables When the Server Secured to the Rack Attaching the Cable Holding Brackets Unlock the Slide Rail 360 Securing the Server to the Rack 361 362 359 358
Installing End Caps on the SPARC Enterprise M4000 Slide Rails Cable Holder on the Rear Right of the Rack 363 364
Securing Cables Other Than the Copper Link Cables Moving the Cable Holder 365 366
Securing the Copper Link Cables Moving the Cable Holder 367
Bracket Kit That Is Attached to the Right Column on the Rear of the Rack 371 Pulling Out the Pull-out Quake-Resistant Options Kit 372 Attaching the Cage Nuts 373 Attaching Screw Plates 374 375
Fixing the Slide Rails in Position on the Rack Rear Right Column of the Rack 376 377
Setting the Pins in the Holes 379 Securing the Slide Rails 379 380
Removing the Pedestal from the Bottom of the Server Folding the Cable Management Arm 382
Securing the Cable Management Arm with Screws 383 Unlocking 384
xii
FIGURE 3-70 FIGURE 3-71 FIGURE 3-72 FIGURE 3-73 FIGURE 3-74 FIGURE 3-75 FIGURE 3-76 FIGURE 3-77 FIGURE 3-78 FIGURE 3-79 FIGURE 3-80 FIGURE 3-81 FIGURE 3-82 FIGURE 3-83 FIGURE 3-84 FIGURE 3-85 FIGURE 3-86 FIGURE 3-87 FIGURE 3-88 FIGURE 3-89 FIGURE 3-90
385 386
Installing End Caps on the Left Rear of the SPARC Enterprise M5000 Slide Rails Cable Holder on the Rear Right of the Rack Cable Bracket Kit 388 389 387
Attaching the Cable Holding Brackets Unlocking 390 Securing the Server to the Rack 391
Installing End Caps on the Left Rear of the SPARC Enterprise M5000 Slide Rails Cable Holder on the Rear Right of the Rack Moving the Cable Holder 395 396 397 393
392
Securing the Optical Fiber Cables Drawing Out the Server 398
Attaching the Cage Nuts 399 Securing the Distribution Box 3100
Requirements Concerning Rack Depth 3102 Detailed Figure of the Slide Rail of the SPARC Enterprise M3000 Server Detailed Figure of the Slide Rail of the SPARC Enterprise M4000 Server Detailed Figure of the Slide Rail of the SPARC Enterprise M5000 Server Detailed Figure of the External I/O Expansion Unit Rack Mounting Rail Rack Column Requirements 3105 3103 3103 3104 3104
Figures
xiii
xiv
Tables
TABLE 1-1 TABLE 1-2 TABLE 1-3 TABLE 1-4 TABLE 2-1 TABLE 2-2 TABLE 2-3 TABLE 2-4 TABLE 2-5 TABLE 2-6 TABLE 2-7 TABLE 2-8 TABLE 2-9 TABLE 3-1 TABLE 4-1
Equipment Rack Types for SPARC Enterprise Servers 12 Equipment Rack Model 1640 Types 13 Equipment Rack Model 1620 Types 14 Model 1740 Rack Types 15
Hardware Units That Can Be Mounted 22 Power Cord Outlet Specifications of M3000 Server 29 Power Cord Outlet Specifications of M4000 Server 212 Power Cord Outlet Specifications of M5000 Server 215 Power Cord and Outlet Specifications of the External I/O Expansion Unit 218 Power Cord and Outlet Specifications of the Power Distribution Box Power Cord and Outlet Specifications of the Power Distribution Box Power Cord and Outlet Specifications of the Power Distribution Box Power Cord and Outlet Specifications of the Power Distribution Box Conditions for Rack Mounting and Methods for Securing Cables Elevator Load Requirements 41 219 220 222 223
342
xv
Preface
This manual describes the installation requirements and items for consideration when installing the equipment rack. Before using the rack, be sure follow the instructions in this manual and consult with a certified service engineer regarding its proper use. This manual is intended for persons who are engaged in computer system installation site planning, persons who are actually installing computer systems, or persons who operate or administrate such systems. Readers are assumed to have some knowledge and experience involving installation site planning for computer systems. This section includes:
Glossary on page xvii Structure and Contents of This Manual on page xviii SPARC Enterprise M3000/M4000/M5000 Servers Documentation on page xviii Text Conventions on page xxi Prompt Notations on page xxi Syntax of the Command Line Interface (CLI) on page xxii Environment Requirements for Using This Product on page xxii Conventions for Alert Messages on page xxiii Notes on Safety on page xxiv Product Handling on page xxvii Fujitsu Welcomes Your Comments on page xxix
Glossary
For the terms used in the SPARC EnterpriseTM Equipment Rack Mounting Guide, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Glossary.
xvii
Chapter 2 Overview of Hardware Units to Be Mounted This chapter provides an overview of the hardware units that can be mounted in the equipment rack.
Chapter 3 Mounting Units in the Rack This chapter provides considerations regarding the mounting of hardware units in the equipment rack.
Chapter 4 Considerations Regarding Carrying-in and Installation This chapter provides considerations regarding the carrying-in and installation of the equipment rack.
SPARC Enterprise M3000 Server Site Planning Guide SPARC Enterprise M4000/M5000 Servers Site Planning Guide SPARC Enterprise Equipment Rack Mounting Guide SPARC Enterprise M3000 Server Getting Started Guide SPARC Enterprise M4000/M5000 Servers Getting Started Guide SPARC Enterprise M3000 Server Overview Guide SPARC Enterprise M4000/M5000 Servers Overview Guide Important Safety Information for Hardware Systems SPARC Enterprise M3000 Server Safety and Compliance Guide SPARC Enterprise M4000/M5000 Servers Safety and Compliance Guide
C120-H030 C120-H015 C120-H016 C120-E536 C120-E345 C120-E537 C120-E346 C120-E391 C120-E538 C120-E348
xviii
Book Titles
Manual Codes
External I/O Expansion Unit Safety and Compliance Guide SPARC Enterprise M4000 Server Unpacking Guide SPARC Enterprise M5000 Server Unpacking Guide SPARC Enterprise M3000 Server Installation Guide SPARC Enterprise M4000/M5000 Servers Installation Guide SPARC Enterprise M3000 Server Service Manual SPARC Enterprise M4000/M5000 Servers Service Manual External I/O Expansion Unit Installation and Service Manual SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Users Guide SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual SPARC Enterprise M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration (DR) Users Guide SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD) Users Guide SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI Users Guide SPARC Enterprise M3000 Server Product Notes SPARC Enterprise M4000/M5000 Servers Product Notes External I/O Expansion Unit Product Notes SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Glossary
C120-E457 C120-E349 C120-E350 C120-E539 C120-E351 C120-E540 C120-E352 C120-E329 C120-E361 C120-E331 C120-E332 C120-E333 C120-E335 C120-E336 C120-E360 Go to the Web Go to the Web C120-E456 C120-E514
1. Manuals on the Web The latest versions of all the SPARC Enterprise Series manuals are available at the following websites. Global Site http://www.fujitsu.com/sparcenterprise/manual/ Japanese Site http://primeserver.fujitsu.com/sparcenterprise/manual/
Preface
xix
Note Product Notes are available on the website only. Please check for the recent update on your product.
2. Documentation CD For the Documentation CD, please contact your local sales representative.
SPARC Enterprise M3000 Server Documentation CD (C120-E541) SPARC Enterprise M4000/M5000 Servers Documentation CD (C120-E365)
Book Title
C112-B067
Note The man page can be referenced on the XSCF shell, and it provides the same content as the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.
5. Solaris Operating System Related Manuals http://docs.sun.com 6. Information on Using the RCI function The manual does not contain an explanation of the RCI build procedure. For information on using the RCI function, refer to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure and SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI Users Guide provided on the website.
xx
Text Conventions
This manual uses the following fonts and symbols to express specific types of information.
Fonts/symbols Meaning Example
AaBbCc123
What you type, when contrasted with on-screen computer output. This font represents the example of command input in the frame. The names of commands, files, and directories; on-screen computer output. This font represents the example of command input in the frame. Indicates the name of a reference manual Indicates names of chapters, sections, items, buttons, or menus
AaBbCc123
Italic
""
Prompt Notations
The following prompt notations are used in this manual.
Shell Prompt Notations
XSCF C shell C shell super user Bourne shell and Korn shell Bourne shell and Korn shell super user OpenBoot PROM
Preface
xxi
A variable that requires input of a value must be enclosed in <>. An optional element must be enclosed in [ ]. A group of options for an optional keyword must be enclosed in [ ] and delimited by |. A group of options for a mandatory keyword must be enclosed in { } and delimited by |. The command syntax is shown in a box.
Example:
XSCF> showuser -a
xxii
Installation and reinstallation of all components Removal of front, rear, or side covers Mounting/unmounting of optional internal devices Connecting/disconnecting of external interface cables Maintenance (repair and regular diagnosis and maintenance)
Also, important alert messages are shown in Important Alert Messages on page xxiv.
Preface
xxiii
Notes on Safety
Important Alert Messages
This manual provides the following important alert signals:
Caution The WARNING signal indicates a dangerous situation could result in death or serious injury if the user does not perform the procedure correctly.
Task
Warning
Normal operation
Electric shock, fire Do not damage, break, or modify the power cords. Cable damage may cause electric shock or fire.
xxiv
Caution The CAUTION signal indicates a hazardous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly. This signal also indicates that damage to the product or other property may occur if the user does not perform the procedure correctly.
Task
Warning
Normal operation
Equipment damage Be sure to follow the precautions below when installing the server. Otherwise, the equipment may be damaged. Do not block ventilation slits. Avoid installing the equipment in a place exposed to direct sunlight or near equipment that becomes extremely hot. Avoid installing the equipment in a dusty place or a place directly exposed to corrosive gas or salty air. Avoid installing the equipment in a place exposed to strong vibration. Also, install the equipment on a level surface so that it is stable. The grounding wire must be class 3 or higher. Connecting it with another grounding wire for shared grounding may cause a malfunction. Be sure to use a single grounding path for the grounding wire. Do not run any cable beneath any equipment. Also, prevent cables from becoming taut. Never disconnect any power cord from the equipment while power is being supplied to the equipment. Do not place anything on top of the server. Do not use the server as a workspace. Avoid exposing the equipment to rapid changes in the ambient temperature, such as a rapid increase during transport in winter. A rapid increase in the ambient temperature causes moisture to condense in the equipment. Use the equipment only after the difference between its temperature and the ambient temperature is negligible. Avoid installing the equipment near a copy machine, air conditioner, or welding machine, which is noisy. Take preventive action to minimize static electricity at the installation location. Note that static electricity is easily generated in some carpets and can cause the equipment to malfunction. Confirm that the power supply voltage and frequency during operation match the rated values indicated on the equipment. Do not insert any object into an opening in the equipment. Components inside the equipment use high voltage. Conductive foreign matter, such as a metal object, inserted into the equipment, may cause a short circuit between components, resulting in fire, electric shock, or equipment damage. For maintenance of the equipment, contact your authorized service personnel.
Preface
xxv
Task
Warning
Normal operation
Data destruction Confirm the items listed below before turning off the power. Otherwise, data may be destroyed. All applications have completed processing. No user is using the equipment. When the server power is turned off, the Power LED on the operation panel is turned off. Be sure to confirm that the Power LED is off before turning off the main power (uninterruptible power supply [UPS], power distribution box, main line switch, etc.). If necessary, back up files before turning off the system power. Data destruction Do not forcibly stop a domain that is operating normally. Otherwise, data may be destroyed. Data destruction Do not disconnect the power cord from the AC power input while power is being supplied. Otherwise, data stored on hard disk units may be destroyed.
xxvi
Product Handling
Maintenance
Caution Certain tasks in this manual should only be performed by a certified service engineer. User must not perform these tasks. Incorrect operation of these tasks may cause electric shock, injury, or fire.
Installation and reinstallation of all components, and initial settings Removal of front, rear, or side covers Mounting/de-mounting of optional internal devices Plugging or unplugging of external interface cards Maintenance and inspections (repairing, and regular diagnosis and maintenance)
Caution The following tasks regarding this product and the optional products provided from Fujitsu Siemens Computers should only be performed by a certified service engineer. Users must not perform these tasks. Incorrect operation of these tasks may cause malfunction.
Unpacking optional adapters and such packages delivered to the users Plugging or unplugging of external interface cards
Remodeling/Rebuilding
Caution Any modification and/or recycling of this product and its components may be carried out only by a certified service engineer and must not be done by the customer under any circumstances. Otherwise, electric shock, injury or fire may result.
Preface
xxvii
xxviii
Preface
xxix
xxx
CHAPTER
Rack Overview
This chapter contains information on the equipment racks, on which the SPARC Enterprise M3000/M4000/M5000 Servers are mounted. Rack types, appearance views, and floor plans are shown below. Equipment Rack Types on page 2 Appearance of the Equipment Rack on page 9 Floor Plans of the Equipment Rack on page 20
1-1
1.1
TABLE 1-1
Item
Rack types
Width
Depth
Height
Rack alone
Remarks
SE-R7RC11 *
700 (27.6)
1050 (41.3)
2000 (78.8)
800 (1760)
1000 (2200)
With a side panel With a quakeresistant options kit Without a side panel With a quakeresistant options kit With a side panel With a quakeresistant options kit Without a side panel With a quakeresistant options kit
SE-R7RC21 *
700 (27.6)
1050 (41.3)
2000 (78.8)
800 (1760)
965 (2123)
SE-R8RC11 *
700 (27.6)
1050 (41.3)
1800 (70.9)
720 (1584)
900 (1980)
SE-R8RC21 *
700 (27.6)
1050 (41.3)
1800 (70.9)
720 (1584)
875 (1925)
*1:The value does not include the weight of the rack itself. *2:The weight of the rack alone includes the weight of the tip-resistant quake-resistant options kits. *3:When a system cabinet is used, it is connected with the base rack. Also, system cabinets can be interconnected. (The interconnected cabinets must be of the same height.) *4:In model names, * is any letter from A to Z.
1-2
TABLE 1-2
Item
Rack types
Width
Depth
Height
Rack alone
Remarks
19R-164A1 *
600 (23.6)
1050 (41.3)
2000 (78.8)
800 (1760)
926 (2037)
With a side panel With a quakeresistant options kit Without a side panel With a quakeresistant options kit With a side panel Without a quakeresistant options kit Without a side panel Without a quakeresistant options kit
19R-164B1 *
600 (23.6)
1050 (41.3)
2000 (78.8)
800 (1760)
94 (206) (*2)
894 (1966)
19R-164A2 *
600 (23.6)
1050 (41.3)
2000 (78.8)
800 (1760)
118 (256)
918 (2019)
19R-164B2 *
600 (23.6)
1050 (41.3)
2000 (78.8)
800 (1760)
86 (189)
886 (1949)
*1:The value does not include the weight of the rack itself. *2:The weight of the rack alone includes the weight of the tip-resistant quake-resistant options kits. *3:When a system cabinet is used, it is connected with the base rack. Also, system cabinets can be interconnected. (The interconnected cabinets must be of the same height.) *4:In model names, * is any letter from A to Z.
Chapter 1
Rack Overview
1-3
TABLE 1-3
Item
Rack types
Width
Depth
Height
Rack alone
Remarks
19R-162A1 *
600 (23.6)
1050 (41.3)
1264 (49.7)
480 (1056)
94 (206) (*2)
574 (1262)
With a side panel With a quakeresistant options kit Without a side panel With a quakeresistant options kit With a side panel Without a quakeresistant options kit Without a side panel Without a quakeresistant options kit
19R-162B1 *
600 (23.6)
1050 (41.3)
1264 (49.7)
480 (1056)
75 (165) (*2)
555 (1221)
19R-162A2 *
600 (23.6)
1050 (41.3)
1264 (49.7)
480 (1056)
86 (189)
566 (1245)
19R-162B2 *
600 (23.6)
1050 (41.3)
1264 (49.7)
480 (1056)
67 (147)
547 (1203)
*1:The value does not include the weight of the rack itself. *2:The weight of the rack alone includes the weight of the tip-resistant quake-resistant options kits. *3:When a system cabinet is used, it is connected with the base rack. Also, system cabinets can be interconnected. (The interconnected cabinets must be of the same height.) *4:In model names, * is any letter from A to Z.
1-4
TABLE 1-4
Item
Model name
Rack types
Width
Depth
Height
Rack alone
Remarks
19R-174A1
700 (27.6)
1050 (41.3)
2000 (78.8)
800 (1760)
943 (2075)
With a side panel With a quakeresistant options kit Without a side panel With a quakeresistant options kit With a side panel With a quakeresistant options kit Without a side panel With a quakeresistant options kit
19R-174B1
700 (27.6)
1050 (41.3)
2000 (78.8)
800 (1760)
910 (2002)
19R-174A2
600 (23.6)
1050 (41.3)
2000 (78.8)
800 (1760)
135 (297)
935 (2057)
19R-174B2
600 (23.6)
1050 (41.3)
2000 (78.8)
800 (1760)
102 (224)
902 (1984)
*1:The value does not include the weight of the rack itself. *2:The weight of the rack alone includes the weight of the tip-resistant quake-resistant options kits. *3:When a system cabinet is used, it is connected with the base rack. Also, system cabinets can be interconnected. (The interconnected cabinets must be of the same height.)
Chapter 1
Rack Overview
1-5
1.2
1.2.1
1.2.2
Note Regardless of whether or not the building or the floor is quake-resistant (seismic isolated), when you do not take measures to fixate the rack, do not fail to select the rack to which the tip-resistance quake-resistant options kit attached. When you perform maintenance on the server mounted on the rack, use the quake-resistant options kit to prevent the rack from toppling over.
1-6
1.2.3
Note It is not permitted to operate the rack to which the tip-resistance quake-resistant options kit not attached, without taking measures to fixate it. When you perform maintenance on the server mounted on the rack, it is mandatory to take measures to fixate the rack, in order to prevent the rack from toppling over.
1.2.4
Options kit for the base rack of the equipment rack for the SPARC Enterprise servers: MC-R1ST11 Options kit for the system cabinet of the equipment rack for the SPARC Enterprise servers: MC-R1ST21 Options kit for the base rack of the equipment rack model 1640/1620: 19R-16ST1 Options kit for the system cabinet of the equipment rack model 1640/1620: 19R-16ST2 Options kit for the base rack of the equipment rack model 1740: 19R-17ST1 Options kit for the system cabinet of the equipment rack model 1740: 19R-17ST2
Chapter 1
Rack Overview
1-7
1.2.5
You can select the rack to which the tip-resistance quake-resistant options kit not attached. You must select the rack to which the tip-resistance quake-resistant options kit attached.
Fixate the rack by using the quake-resistant options kit. Fixate the rack by using the level feet. - (See *3 and *4.)
Quake-resistant options kit. (See *1 and *2.) None. (See *1.) None.
*1:The bolts to fixate the rack to the building are supposed to be arranged by the constructors. *2:There are two kinds of quake-resistant options kit; the kit for the base rack and the kit for the system cabinet.
Options kit for the base rack: Parts for the front (x1), parts for the rear (x1), parts for the side (x2), set of fixing bolts Options kit for the system cabinet: Parts for the front (x1), parts for the rear (x1), set of fixing bolts When the quake-resistant options kit for the base rack applied to the system cabinet, the parts for the side of the rack become redundant. When the quake-resistant options kit for the system cabinet applied to the base rack, it lacks the parts for the side of the rack. It is not permitted to operate the system without attaching the parts for the side.
*3:You can select the rack to which the tip-resistant quake-resistant options kit attached and use the quake-resistant options kit to fixate it. However, there are limitations as follows.
When the tip-resistant quake-resistant options kit is the pull-out quake-resistant options kit: You can't attach the quake-resistant options kit and the pull-out quake-resistant options kit at the same time. You need to detach the pull-out quake-resistant options kit before you attach the quake-resistant options kit.
When the tip-resistant quake-resistant options kit is the bolt-on quake-resistant options kit: Among the components included in the quake-resistant options kit, the parts for the front of the rack (front parts) become redundant.
1-8
*4:You can select the rack to which the tip-resistant quake-resistant options kit attached and use the level feet to fixate it with the quake-resistant options kit remain attached. In this case, the quake-resistant options kit becomes functionally unnecessary.
1.3
Appearance of System Cabinet of the Equipment Rack Model 1620 (Model Name: 19R162B1/19R-162B2).
FIGURE 1-9 Appearance of Base Rack of the Equipment Rack Model 174 (Model Name: 19R174A1/19R-174A2), and FIGURE 1-10 Appearance of System Cabinet of the Equipment Rack
Chapter 1
Rack Overview
1-9
Base Rack of the Equipment Rack for the SPARC Enterprise Servers Model Name: SER7RC11
FIGURE 1-1
Appearance of Base Rack of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SER7RC11)
Top View
Front View
Right Side
1-10
System Cabinet of the Equipment Rack for the SPARC Enterprise Servers Model Name: SE-R7RC21
FIGURE 1-2
Appearance of System Cabinet of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SE-R7RC21)
Top View
Front View
Right Side
Chapter 1
Rack Overview
1-11
Base Rack of the Equipment Rack for the SPARC Enterprise Servers Model Name: SER8RC11
FIGURE 1-3
Appearance of Base Rack of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SER8RC11)
Top View
Front View
Right Side
1-12
System Cabinet of the Equipment Rack for the SPARC Enterprise Servers Model Name: SE-R8RC21
FIGURE 1-4
Appearance of System Cabinet of the Equipment Rack for the SPARC Enterprise Servers (Model Name: SE-R8RC21)
Top View
Front View
Right Side
Chapter 1
Rack Overview
1-13
Base Rack of the Equipment Rack Model 1640 Model Name: 19R-164A1/19R-164A2
FIGURE 1-5
Appearance of Base Rack of the Equipment Rack Model 1640 (Model Name: 19R-164A1/19R-164A2)
1050 (41.3)
Top View
600(23.6)
Front View
2000 (78.8)
Right Side
1-14
System Cabinet of the Equipment Rack Model 1640 Model Name: 19R-164B1/19R164B2
FIGURE 1-6
Appearance of System Cabinet of the Equipment Rack Model 1640 (Model Name: 19R-164B1/19R164B2)
1050 (41.3)
Top View
600(23.6)
Front View
2000 (78.8)
Right Side
Chapter 1
Rack Overview
1-15
Base Rack of the Equipment Rack Model 1620 Model Name: 19R-162A1/19R-162A2
FIGURE 1-7
Appearance of Base Rack of the Equipment Rack Model 1620 (Model Name: 19R-162A1/19R-162A2)
1050 (41.3)
Top View
600 (23.6)
Front View
1264 (49.8)
Right Side
1-16
System Cabinet of the Equipment Rack Model 1620 Model Name: 19R-162B1/19R162B2
FIGURE 1-8
Appearance of System Cabinet of the Equipment Rack Model 1620 (Model Name: 19R-162B1/19R162B2)
1050 (41.3)
Top View
600 (23.6)
Front View
1264 (49.8)
Right Side
Chapter 1
Rack Overview
1-17
Base Rack of the Equipment Rack Model 1740 Model Name: 19R-174A1/19R-174A2
FIGURE 1-9
Appearance of Base Rack of the Equipment Rack Model 1740 (Model Name: 19R-174A1/19R-174A2)
Top View
Front View
Right Side
1-18
System Cabinet of the Equipment Rack Model 1740 Model Name: 19R-174B1/19R174B2
FIGURE 1-10
Appearance of System Cabinet of the Equipment Rack Model 1740 (Model Name: 19R-174B1/19R174B2)
Top View
Front View
Right Side
Chapter 1
Rack Overview
1-19
1.4
Floor Plan of the Equipment Rack (FIGURE 1-11, FIGURE 1-12) Floor Plan of the Equipment Rack with the Pull-out quake-resistant options kit Mounted (FIGURE 1-14) Floor Plan of Interconnected Equipment Racks (FIGURE 1-15, FIGURE 1-16, FIGURE 1-17)
1-20
FIGURE 1-11
Legend: Cable extraction (insertion) hole Caster Quake-resistant options kit (for tip-resistance) Quake-resistant options kit (for unit securing and earthquake-proofing)
Level feet (At the center of the level foot, there is a 17 mm-deep, M20-size screw hole used for securing the rack in position.) Floor hole for securing the quake-resistant options kit
Unit: mm (in.)
Chapter 1
Rack Overview
1-21
FIGURE 1-12
level feet (At the center of the level foot, there is a 17 mm-deep, M20-size screw hole used for securing the rack in position.) Floor hole for securing the quake-resistant options kit
Unit: mm (in.)
1-22
FIGURE 1-13
level feet (At the center of the level foot, there is a 17 mm-deep, M20-size screw hole used for securing the rack in position.) Floor hole for securing the quake-resistant options kit
Unit: mm (in.)
Chapter 1
Rack Overview
1-23
Floor Plan of the Equipment Rack with the Pull-out Quake-Resistant Options Kit Mounted
FIGURE 1-14
Floor Plan of the Equipment Rack with the Pull-out Quake-Resistant Options Kit Mounted
Legend: Cable extraction (insertion) hole Caster level feet (At the center of the level foot, there is a 17 mm-deep, M20-size screw hole used for securing the rack in position.) Unit: mm (in.)
1-24
FIGURE 1-15
Floor Plan of Interconnected Equipment Racks for SPARC Enterprise Servers Front of the unit
FIGURE 1-16
Floor Plan of Interconnected Equipment Racks Model 1640/1620 Front of the unit
40.5 (1.6) 137.5 (5.4) 600 (23.6) 519 (20.4) 81 (3.2) 600 (23.6) 600 (23.6) 519 (20.4) 40.5 (1.6) 36.5 (1.4) 977 (38.5) 100 (3.9) 400 (15.7) 200 (7.8) 400 (15.7) 200 (7.8) 400 (15.7) 200 (7.8) 400 (15.7) 100 (3.9)
775 (30.5)
Chapter 1
Rack Overview
1-25
FIGURE 1-17
Floor Plan of Interconnected Equipment Racks Model 1740 Front of the unit level feet
1-26
CHAPTER
Outline of Hardware Units That Can Be Mounted on page 2-1 Appearance of Units on page 2-3 Power Supply Connection on page 2-6
2.1
2-1
TABLE 2-1
Product name
Width
Depth
Height
Remarks
440 (17.4)
657 (25.9)
87 (3.4) 2U
22 (48.5)
Equipment rack-mount type SPARC Enterprise Server unit. Up to 1 CPU can be mounted in the 2U-size server. Equipment rack-mount type SPARC Enterprise Server unit. Up to 4 CPUs can be mounted in the 6U-size server. Equipment rack-mount type SPARC Enterprise Server unit. Up to 8 CPUs can be mounted in the 10U-size server. Unit for expanding the PCI slots. Up to 12 PCIX or Express slots can be installed per unit. Up to two units can be connected to the M4000 server and up to four units can be connected to the M5000 server.
444 (17.5)
810 (31.9)
263 (10.35) 6U
84 (185)
444 (17.5)
810 (31.9)
125 (275)
440 (17.32)
175 (6.9) 4U
37 (81)
*1: The value indicates the weight for when all options are mounted. *2: The value indicates the depth including the cable management arm.
2-2
2.2
Appearance of Units
This section provides the appearance of the units.
SPARC Enterprise M3000 Server Appearance on page 2-3 (FIGURE 2-1) SPARC Enterprise M4000 Server Appearance on page 2-4 (FIGURE 2-2) SPARC Enterprise M5000 Server Appearance on page 2-5 (FIGURE 2-3) Appearance of the External I/O Expansion Unit on page 2-6 (FIGURE 2-4)
SPARC Enterprise M3000 Server Appearance
FIGURE 2-1
Top View
Front View
Right Side
Chapter 2
2-3
FIGURE 2-2
Top View
Front View
Right Side
2-4
FIGURE 2-3
Top View
Front View
Right Side
Chapter 2
2-5
FIGURE 2-4
Top View
Front View
Right Side
2.3
Section 2.3.1, Section 2.3.2, Section 2.3.3, Section 2.3.4, Section 2.3.5,
SPARC Enterprise M3000 Server on page 2-7 SPARC Enterprise M4000 Server on page 2-10 SPARC Enterprise M5000 Server on page 2-13 External I/O Expansion Unit on page 2-16 Power Distribution Box on page 2-19
Caution Use only the power cords supplied with this product to connect this product. Do not to use these power cords with other products.
2-6
2.3.1
FIGURE 2-5
PSU#0
Note If more than one power cord of this server is connected directly to the customer's distribution panel, connect the power cords to outlets independently using one cable per power feed as shown in FIGURE 2-5.
Note If connected to uninterruptible power supply (UPS) or the power distribution box, you do not have to connect the power cords one-on-one but can connect the cords in a collective form within the range of current capacity of UPS or the power distribution box.
Chapter 2
2-7
FIGURE 2-6
AC Power Supply CB
Note If more than one power cord of this server is connected directly to the customer's distribution panel, connect the power cords to outlets independently using one cable per power feed as shown in FIGURE 2-6.
Note For dual power feed connection, connect the individual power cords separately to each AC power supply system.
2-8
TABLE 2-2
Delivery destination
Specifications
Two-parallel-prong plug with grounding electrode (125 V, ** A) [NEMA standard type name: 5-15P]
* Connect it to the power distribution box, or prepare an outlet for the unit. Receptacle for parallel two-prong plug with grounding electrode (125V15A) [NEMA 5-15R] * Connect it to the power distribution box, or prepare an outlet for the unit. Receptacle for three-prong hook type plug with grounding electrode (250V15A) [NEMA L6-15R]
Three-prong twist-lock plug with grounding electrode (250 V, 15 A) [NEMA standard type name: L6-15P]
Note For the servers that have the B-type plug, confirm that a 15A overcurrent protection device is available outside the server. If not, prepare an external 15A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
Chapter 2
2-9
2.3.2
FIGURE 2-7
Note If more than one power cord of this server is connected directly to the customer's distribution panel, connect the power cords to outlets independently using one cable per power feed as shown in FIGURE 2-7.
Note If connected to uninterruptible power supply (UPS) or the power distribution box, you do not have to connect the power cords one-on-one but can connect the cords in a collective form within the range of current capacity of UPS or the power distribution box.
2-10
FIGURE 2-8
#0 #1
Note If more than one power cord of this server is connected directly to the customer's distribution panel, connect the power cords to outlets independently using one cable per power feed as shown in FIGURE 2-8.
Note For dual power feed connection, connect the individual power cords separately to each AC power supply system.
Chapter 2
2-11
TABLE 2-3
Delivery destination
Specifications
Three-prong hook type plug with grounding electrode (250V20A) [NEMA L6-20P]
* Prepare the outlet for an outlet for the unit. Receptacle for three-prong hook type plug with grounding electrode (250V20A) [NEMA L6-20R] 3220-L6 (American Denki) or other * Prepare the outlet for an outlet for the unit. Receptacle for three-prong hook type plug with grounding electrode (250V13A) [IEC60320-C13]
Note The plug (NEMA L6-20) of the power cords supplied with the SPARC Enterprise M4000/M5000 servers has the following dimensions. Confirm in advance that the plug does not become an obstruction when plugged into the input power source at the installation site. - Outside diameter of the connector part of the plug: 50 mm - Maximum outside diameter of the plug cover: 57 mm - Plug cover length from the connector end: 69.9 mm
Note For the servers that have the B-type plug, confirm that a 20A overcurrent protection device is available outside the server. If not, prepare an external 20A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
2-12
2.3.3
FIGURE 2-9
#1 #2 #3
Note If more than one power cord of this server is connected directly to the customer's distribution panel, connect the power cords to outlets independently using one cable per power feed as shown in FIGURE 2-9.
Note If connected to uninterruptible power supply (UPS) or the power distribution box, you do not have to connect the power cords one-on-one but can connect the cords in a collective form within the range of current capacity of UPS or the power distribution box.
Chapter 2
2-13
FIGURE 2-10
Note If more than one power cord of this server is connected directly to the customer's distribution panel, connect the power cords to outlets independently using one cable per power feed as shown in FIGURE 2-10.
Note For dual power feed connection, connect the individual power cords separately to each AC power supply system.
2-14
TABLE 2-4
Delivery destination
Specifications
Three-prong hook type plug with grounding electrode (250V20A) [NEMA L6-20P]
* Prepare the outlet for an outlet for the unit. Receptacle for three-prong hook type plug with grounding electrode (250V20A) [NEMA L6-20R] 3220-L6 (American Denki) or other * Prepare the outlet for an outlet for the unit. Receptacle for three-prong hook type plug with grounding electrode (250V13A) [IEC60320-C13]
Note The plug (NEMA L6-20) of the power cords supplied with the SPARC Enterprise M4000/M5000 servers has the following dimensions. Confirm in advance that the plug does not become an obstruction when plugged into the input power source at the installation site. - Outside diameter of the connector part of the plug: 50 mm - Maximum outside diameter of the plug cover: 57 mm - Plug cover length from the connector end: 69.9 mm
Note For the servers that have the B-type plug, confirm that a 20A overcurrent protection device is available outside the server. If not, prepare an external 20A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
Chapter 2
2-15
2.3.4
FIGURE 2-11
2-16
FIGURE 2-12
Power System in a Dual-power Supply Configuration Power distribution box (option) CB(15A) Customer's distribution panel #0 No connection (*1) CB(15A) CB
#1 No connection (*1)
CB(15A)
Chapter 2
2-17
TABLE 2-5
Power Cord and Outlet Specifications of the External I/O Expansion Unit
Plug type Receptacle type Shape Specifications Shape
Delivery destination
Specifications
Two-parallel-prong plug with grounding electrode (125 V, ** A) [NEMA standard type name: 5-15P]
* Connect it to the power distribution box, or prepare an outlet for the unit. Receptacle for parallel twoprong plug with grounding electrode (125V15A) [NEMA 5-15R] * Connect it to the power distribution box, or prepare an outlet for the unit. Receptacle for three-prong hook type plug with grounding electrode (250V15A) [NEMA L6-15R] Embedded type: 3120/3120-P/3120-D (American Denki) Exposed type: 3121 (American Denki)
Three-prong twist-lock plug with grounding electrode (250 V, 15 A) [NEMA standard type name: L6-15P]
Note For the servers that have the B-type plug, confirm that a 15A overcurrent protection device is available outside the server. If not, prepare an external 15A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
2-18
2.3.5
FIGURE 2-13
CB(15A)
Maximum 12A /group
CB(15A)
Maximum 12A /group
CB(15A)
Maximum 12A /group
Outlet
Overcurrent protection device (CB) CB: Circuit breaker (overcurrent protection device)
TABLE 2-6
Outlet for twoparallel-prong plug with grounding electrode (125 V, 15 A) (lock mechanism) [NEMA 5-15R]
Outlet for three-prong twist-lock plug with grounding electrode (125 V, 30 A) [NEMA L5-30R] Embedded type: 3310L5 (American Denki) Exposed type: 3311L5(American Denki)
Chapter 2
2-19
FIGURE 2-14
CB(15A)
Maximum 12A /group
Outlet
Overcurrent protection device (CB) CB: Circuit breaker (overcurrent protection device)
TABLE 2-7
Outlet for threeprong twist-lock plug with grounding electrode (250 V, 15 A) [NEMA L6-15R]
* Outlet for threeprong twist-lock plug with grounding electrode (250 V, 30 A) [NEMA L6-30R] Embedded type: 3320L6 (American Denki) Exposed type: 3321L6 (American Denki)
2-20
Note For the servers that have the B-type plug, confirm that a 30A overcurrent protection device is available outside the server. If not, prepare an external 30A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
Chapter 2
2-21
FIGURE 2-15
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A Maximum 12A
CB(15A) CB(15A)
Maximum 12A
CB(15A)
Maximum 12A Maximum 12A
CB(15A) CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
Outlet
Overcurrent protection device (CB) CB: Circuit breaker (overcurrent protection device)
TABLE 2-8
Outlet for twoparallel-prong plug with grounding electrode (125 V, 15 A) [NEMA 515R]
* Outlet for threeprong twist-lock plug with grounding electrode (125 V, 30 A) [NEMA L5-30R]
2-22
FIGURE 2-16
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
CB(15A)
Maximum 12A
Outlet
Overcurrent protection device (CB) CB: Circuit breaker (overcurrent protection device)
TABLE 2-9
IEC320-C13 type
* Outlet for threeprong twist-lock plug with grounding electrode (250 V, 30 A) [NEMA L6-30R]
Note For the servers that have the B-type plug, confirm that a 30A overcurrent protection device is available outside the server. If not, prepare an external 30A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
Chapter 2
2-23
2-24
CHAPTER
Rack Mounting Examples on page 3-1 Service Area on page 3-2 Restriction on Mounting and Requirements for Maintenance on page 3-5 Equipment Rack Mounting Requirements on page 3-12 Procedure for Mounting the SPARC Enterprise M3000 Server in the Rack on page 3-17 Procedure for Mounting the SPARC Enterprise M4000 Server in the Rack on page 3-39 Procedure for Mounting the SPARC Enterprise M5000 Server in the Rack on page 3-68 Procedure for Mounting the Power Distribution Box in the Rack on page 3-99 Mounting the Server in a Rack Produced by a Company Other Than Fujitsu on page 3100
3.1
The left shows the case when 15 SPARC Enterprise M3000 Server units. The center shows the case when 5 SPARC Enterprise M4000 Server units and an External I/O Expansion Unit mounted in the equipment rack, and the right shows the case when 3 SPARC Enterprise M5000 Server units and an External I/O Expansion Unit mounted.
3-1
FIGURE 3-1
3.2
Service Area
The SPARC Enterprise M3000/M4000/M5000 Servers are accessed from the top surfaces. A stepladder may be required for maintenance depending upon the height these servers are mounted in the rack. Secure an adequate service area for maintenance work depending upon the height the server is mounted in the rack. For information on mounting locations in a rack that require use of a stepladder, see Section 3.3, Restriction on Mounting and Requirements for Maintenance on page 3-5.
3-2
3.2.1
FIGURE 3-2
Service area
Service area
* When the equipment rack model 1640/1620 is used : 600 (23.6) Unit: mm (in.)
Chapter 3
3-3
3.2.2
the area must be secured so that the stepladder can be oriented both perpendicularly to and in parallel with the server.
FIGURE 3-3
Service area
Stepladder Stepladder
Step ladder
*3 *2 Unit: mm (in.)
Service area
Step ladder *3 *2
*1
*1 When the equipment rack model 1640/1620 is used : 600 (23.6) *2 When the SPARC Enterprise M3000 server is mounted : 800 (31.5) *3 When the SPARC Enterprise M4000 or M5000 server is mounted : 500 (19.7)
3-4
3.3
3.3.1
Chapter 3
3-5
FIGURE 3-4
Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M3000 Server (when the 40U rack is used)
40U
20U
0U
3-6
3.3.2
Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M4000 Server
The mounting locations, and number of persons required for maintenance of the SPARC Enterprise M4000 where a stepladder is required are indicated in FIGURE 3-5. You can mount up to 5 SPARC Enterprise M4000 Server units, which is 6U-size, under the 35U location. The SPARC Enterprise M4000 Server cannot be mounted at or above the 36U location.
Chapter 3
3-7
FIGURE 3-5
Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M4000 Server (when the 40U rack is used)
40U Unavailable for mounting (36U-40U) * Units can be mounted under the 35U location. Stepladder (1) required when maintenance is performed by one person. 26U
0U
Note *: In the above figure, the number indicating the space that is not available for mounting the server is for cases when the 40U rack is used. When the server is mounted on a rack having space less than 40U, the topmost 5U space is not available. (When the 36U rack is used, the space from 32 U to 36U is not available.)
3-8
3.3.3
Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M5000 Server
The mounting locations, and number of persons required for maintenance of the SPARC Enterprise M5000 where a stepladder is required are indicated in FIGURE 3-6. If a server is mounted at a location between 21U and 24U, a stepladder is not required when two persons perform the maintenance. You can mount up to 3 SPARC Enterprise M5000 Server units, which is 10U-size, under the 32U location. The SPARC Enterprise M5000 Server cannot be mounted at or above the 33U location.
Chapter 3
3-9
FIGURE 3-6
Mounting Restriction and Requirements for Maintenance of the SPARC Enterprise M5000 Server (when the 40U rack is used)
40U Unavailable for mounting (33U-40U) * Units can be mounted under the 32U location. Stepladder (1) required when maintenance is performed by two persons. 30U Stepladder (1) required when maintenance is performed by one person. 20U
0U
Note *: In the above figure, the number indicating the space that is not available for mounting the server is for cases when the 40U rack is used. When the server is mounted on a rack having space less than 40U, the topmost 8U space is not available. (When the 36U rack is used, the space from 29 U to 36U is not available.)
3-10
3.3.4
Chapter 3
3-11
3.4
When you use the rack to which the tip-resistance quake-resistant options kit attached; you need to attach the quake-resistant options kit to prevent the rack from toppling over. You can select the rack to which the tip-resistant quake-resistant options kit attached and use the leveling feet to fixate it with the quake-resistant options kit remain attached. For details, see Section 3.4.1, When Using the Pull-out Quake-Resistant Options Kit on page 3-13, or Section 3.4.2, When Using the Bolt-on Quake-Resistant Options Kit on page 3-13.
When you use the rack to which the tip-resistance quake-resistant options kit not attached; you must take measures to fixate the rack. Before you perform maintenance, do not fail to confirm that the appropriate measures taken for fixation. For details, see Section 3.4.3, When You Take Measures to Fixate the Rack for Quake Resistance on page 3-14.
3-12
3.4.1
Stopper bracket
Slide chassis
Caution Be sure to pull the slide chassis all the way out to the point indicated by the end mark. If the slide chassis is not pulled all the way out to the end mark point, the equipment rack may topple over when drawing a server out from a rack.
Caution Make sure that there is no unevenness between the level feet of the slide chassis where they come into contact with the floor surface. If there is any unevenness between them where they come into contact with the floor surface, the equipment rack may topple over.
3.4.2
Chapter 3
3-13
FIGURE 3-9
3.4.3
When You Take Measures to Fixate the Rack for Quake Resistance
Use either of the methods below to affix the rack to the floor.
3-14
3.4.3.1
Method with Quake-Resistant Options Kits Mounted to the Front, Rear, Right side, and Left Side of the Rack and the Quake-Resistant Options Kits Anchored to the Floor
FIGURE 3-10
Chapter 3
3-15
3.4.3.2
Method for Anchoring the Level Feet of the Rack to the Floor
FIGURE 3-11
Rear view
Level feet
Bolt (M20) Height (measured from floor level) 250-400 mm (10-16 in.)
Frame
Column
3.4.4
3.4.5
Other Requirements
Blank panels are supplied with the equipment rack. These panels are used to cover the space at the front of the rack where no units are mounted, If warm air exhausted from units flows to the front and is re-introduced into the units, a temperature alarm may be triggered and a problem may result. Be sure to use the blank panels to cover the front of the rack where no units are mounted.
3-16
3.5
Procedure for Mounting the SPARC Enterprise M3000 Server in the Rack
To mount the server in the equipment rack, use the parts shown on the following slide rail kit list and cable management arm kit list.
3.5.1
Chapter 3
3-17
Parts position
Required number
Remarks
1 2 3 4 5 6 7 8
Middle-sized bracket / CA32476-Y701 Large-sized bracket / CA32476-Y715 Large-sized bracket / CA32476-Y713 Small-sized bracket / CA32476-Y705 Screw plate / CA32476-Y714 Bracket -1 attachment / CA32476-Y700 Bracket -2 attachment / CA32476-Y703 Slide rail / CA82254-0015
Front Right rear Left rear Left rear Rear Left rear Right rear Side surface
2 1 1 1 2 1 1 2
Slide rail kit list for SPARC Enterprise M3000 Server (screws)
Required number
Remarks
9 10 11 12 13
M3 flathead screw / F6-SSA3-08121 M5 cage nut / CA30205-0392 M5 flathead screw / F6-SSA5-10121 Washer / CA82224-Y021 M5 screw / F6-SW2N5-16121
4 2 8 8 2
M3 x 8 mm
M5 x 10 mm
M5 x 16 mm
3-18
Required number
Remarks
14 15 16
M4 bind screw (short type) / F6-SBD4-05121 M4 bind screw (long type) / F6-SBD4-08121 M4 screw / F6-SW2N4-08121
12 4 1
M4 x 5 mm M4 x 8 mm M4 x 8 mm
Caution Before installing the server in the rack, make certain that all screws are properly tightened.
Cable management arm kit list for SPARC Enterprise M3000 Server
Parts position
Required number
Remarks
17 18 19 20 21
Cable management arm / CA32476-C750 Inner slide rail holding bracket / CA32476-Y763 Velcro fastener / CA32476-Y764 M4 bind screw (long type) / F6-SBD4-08121 M4 screw / F6-SW2N4-08121 Left rear
1 1 6 2 2 M4 x 8 mm M4 x 8 mm
Chapter 3
3-19
3.5.2
Stopper bracket
Slide chassis
Level foot
End mark
Caution Be sure to pull the slide chassis all the way out to the point indicated by the end mark. If the slide chassis is not pulled all the way out to the end mark point, the equipment rack may topple over when drawing a server out from a rack.
Caution Make sure that there is no unevenness between the level feet of the slide chassis where they come into contact with the floor surface. If there is any unevenness between them where they come into contact with the floor surface, the equipment rack may topple over.
3.5.3
3-20
FIGURE 3-13
Move the locking lever on the inner slide rail to release the lock and pull out the inner slide rails. Locking lever
2. Attach the large, middle and small-sized brackets to the rack columns. a. Attach the screw plate to the large-sized bracket.
FIGURE 3-14
Attaching the Screw Plate Large-sized bracket Screw plate Left rear Right rear
Screw plate
b. Attach the middle-sized brackets to the front columns. c. Attach the large-sized brackets to the rear columns.
Chapter 3
3-21
Note The right and left large-sized brackets have different shapes. Each bracket must be installed in the proper position.
d. Attach the small-sized bracket to the left rear column.
Note Use the small-sized bracket in case the distance between the front and the rear columns is less than 748 mm.
3-22
FIGURE 3-15
M5 cage nut Middle-sized bracket 2U M5 flathead screw Washer Leave the hole nearest to the lower end of the unit unused. M5 flathead screw M5 flathead screw M5 cage nut
Left front
Washer Le ss tha n7 M5 cage nut 48 Middle-sized mm bracket Middle-sized Large-sized bracket bracket Large-sized bracket Washer
Left rear Washer M5 flathead screw M5 screw M5 flathead Small-sized bracket screw
Rack column
Right rear
Small-sized bracket 2U 2U
3-23
M5 screw
Screw plate
Chapter 3
3. Attach the bracket-1 attachment to the end of the right slide rail, as viewed from the rear of the rack.
FIGURE 3-16
Slide rail
Bracket-1 attachment
Rear
In the same manner, attach the bracket-2 attachment to the end of the left slide rail, as viewed from the rear of the rack.
FIGURE 3-17
Slide rail
Bracket-2 attachment
Rear
Note The left and right brackets are different in shape. Each bracket must be installed in its proper position.
3-24
4. Attach the slide rail fitted with the bracket-1 attachment to the middle and large-sized brackets that are secured to the right column, as viewed from the rear. a. Attach the slide rails to the middle-sized brackets.
Note To secure the slide rail to the middle-sized bracket, first secure the anterior round hole, then slide the slide rail while holding down the locking lever and secure the center of the oval hole to the posterior round hole of the bracket.
b. Attach the slide rails to the large-sized brackets.
Note When multiple screw holes are available on the large-sized bracket, use the holes that are nearest to and farthest from the rear column.
c. To attach the small-sized bracket, use M4 screw to the bracket-1 attachment.
Note Use the small-sized bracket in case the distance between the front and the rear columns is less than 748 mm.
Chapter 3
3-25
FIGURE 3-18
Slide rail
Slide rail
Locking lever
M4 screw
Middle-sized bracket
Slide rail
Bracket -1 attachment
Rear
3-26
5. Attach the slide rail fitted with the bracket-2 attachment to the middle and large-sized brackets that are secured to the left column, as viewed from the rear. a. Attach the slide rails to the middle-sized brackets.
Note To secure the slide rail to the middle-sized bracket, first secure the anterior round hole, then slide the slide rail while holding down the locking lever and secure the center of the oval hole to the posterior round hole of the bracket.
b. Attach the slide rails to the large-sized brackets.
Note When multiple screw holes are available on the large-sized bracket, use the holes that are nearest to and farthest from the rear column.
Chapter 3
3-27
FIGURE 3-19
Slide rail
Locking lever
Slide rail
Bracket -2 attachment
Slide rail
Large-sized bracket
Slide rail
3-28
6. Attach the inner slide rails in place on the server. To attach the inner slide rail, use four M4 bind screws (short type) on each side surface of the server.
FIGURE 3-20
Front
Rear
Chapter 3
3-29
7. Attach the inner slide rail holding bracket to the inner slide rail. To secure the inner slide rail holding bracket, attach two M4 bind screws (long type) on the inner slide rail and tighten up toward the server.
FIGURE 3-21
Attaching the Inner Slide Rail Holding Bracket to the Inner Slide Rail
3-30
8. Insert the middle slide rail into the outer slide rails until fully seated.
FIGURE 3-22
Inserting the Middle Slide Rail into the Outer Slide Rails Locking lever Middle slide rail
Push the locking lever on the middle slide rail and insert the rails all the way until fully seated into the outer slide rails.
Rear
Front
Rear
Front
Chapter 3
3-31
9. Make sure that the bearing board (thin metal sheet with oval holes) that is housed in the rails is at the front end of the rail.
FIGURE 3-23
Rear
Front
10. Release the locking lever on the inner slide rails and insert the server into the rack.
Caution Prior to installing a server in the equipment rack, deploy the anti-tilt feature for your rack.
3-32
FIGURE 3-24
a. Place the tip of the inner slide rail to the groove on the middle slide rail and insert the server into the rack.
Front
b. While inserting the server in the rack, a click should be heard to indicate the server is in locked position. c. Move the locking lever on the inner slide rail backwards or forwards to release the lock, and continue to carefully insert the server in the rack until fully seated.
Locking lever
Chapter 3
3-33
Caution With the server extended fully out on the rails, make sure that the slide rails are locked. If not locked, the server may come off from the slide rails and may be damaged.
3.5.4
3-34
FIGURE 3-25
Front
Front
Note With the server extended fully out on the rails and firmly supported by two people, gently shake it to make sure the server does not come off from the slide rails.
2. In case the slide rails are not properly installed, rework from Step 8.
Chapter 3 Mounting Units in the Rack 3-35
3. Tighten the two thumbscrews on the front bezel to secure the server to the rack.
FIGURE 3-26
Thumbscrew
3.5.5
3-36
4. Attach the thumbscrew of the CMA to the inner slide rail holding bracket that is secured to right rear inner slide rail, as viewed from the rear of the rack.
FIGURE 3-27
M4 screw Front
Bracket -1 attachment
Rear
Bracket -2 attachment
5. Connect the power cord to the rear of the server. 6. Pass the Velcro fasteners through the six cut-outs on the CMA to secure the cables such as power cord and LAN cables in a bundle. In so doing, pull the server out to the front to give the cables the excess length.
Chapter 3
3-37
FIGURE 3-28
Securing the Cables Status of cables when the server is pulled out
Power cord
Velcro fastener
3-38
3.6
Procedure for Mounting the SPARC Enterprise M4000 Server in the Rack
To mount the server in the equipment rack, use the parts shown on the following mount kit list.
Chapter 3
3-39
3.6.1
3-40
Parts name
Required number
1 2 3, 9 4 5 6 7 8 10 11 12 13
bracket M2.5 flathead screw M5 cage nut M5 flathead screw washer slide rail inner slide rail cable bracket * M5 screw velcro strip end cap cable management arm (CMA) *
4 8 8 8 8 2 2 2 4 10 2 1
*: About the cable management of M4000 server The parts to secure the cables vary depending on whether or not the copper link cables or the optical fiber cables connected. (See TABLE 3-1.)
3.6.2
Chapter 3
3-41
TABLE 3-1
Mounting conditions
CMA available
CMA
Section 3.6.5, Attaching the Cable Management Arm on page 3-51 Section 3.6.6, Attaching the Cable Bracket on page 3-58 Method for securing cables other than the copper link cables on page 3-64 Section 3.6.6, Attaching the Cable Bracket on page 3-58 Method for securing the copper link cables on page 3-66
Cable bracket
3-42
3.6.3
Stopper bracket
Slide chassis
Caution Be sure to pull the slide chassis all the way out to the point indicated by the end mark. If the slide chassis is not pulled all the way out to the end mark point, the equipment rack may topple over when drawing a server out from a rack.
Caution Make sure that there is no unevenness between the level feet of the slide chassis where they come into contact with the floor surface. If there is any unevenness between them where they come into contact with the floor surface, the equipment rack may topple over.
Chapter 3
3-43
3.6.4
FIGURE 3-30
Magnified view
3-44
2. Attach four screw plates to their corresponding locations on the slide rails (front right, front left, rear right, and rear left) with two M2.5 flathead screws at each location.
FIGURE 3-31
Attaching the Screw Plates Bracket Screw plate Bracket Screw plate
Screw Screw
Screw Screw
Chapter 3
3-45
3. Secure the slide rails to the rack with screws (two M5 flathead screws at each of four locations) and washers (two at each of the four locations). The same type of rail is used on both the right and left sides, and the rail can be fixed in position on either side. The bracket parts on the rear side are movable with the help of the springs, and the brackets must be fixed in position while opened.
FIGURE 3-32
Slide rail
Washer
Screw (M5)
The same for the front, rear, right, and left parts (8 locations) Lower hole on 3U Upper hole on 1U
3-46
4. Secure the inner parts of the slide rails in place on the server. a. Confirm the inner slide rail attachment orientation. b. Align the center holes in the inner slide rails with the pins on the server.
FIGURE 3-33
Part B
Part A
FIGURE 3-34
Align the center holes with pins on the server Magnified view of part A Magnified view of part B
Chapter 3
3-47
c. Slide the inner slide rails toward the front of the server (set the rails such that they are locked in place by the holes at the rear of the lock mechanism).
FIGURE 3-35
Align the backmost holes with the pins on the server Magnified view of part A Magnified view of part B
Method for removing the inner slide rails To remove an inner slide rail, slide the rail to align the center holes on the rail with the pins on the server and then remove the rail.
FIGURE 3-36
Align the center holes with pins on the server Magnified view of part A Magnified view of part B
3-48
6. Position the bearing boards on the interior of the slide rails in full forward position until they are stopped by the black plastic alignment guides.
FIGURE 3-37
Caution For safe rack mounting, ensure that the bearing boards are all the way forward inside the slide rails. Also ensure the black plastic rail alignment guides are securely attached at the end of the inside of the slide rails. These guides will assist in the initial mating of the inner rails attached to the sides of the server.
Caution Do not use the handles on the front of the server to lift the server. The front handles are designed for sliding the server in and out of the equipment cabinet. The handles will not support the weight of the server.
Chapter 3
3-49
7. Using the lifter to raise the server, adjust its height to the height of the slide rails. Slide the server toward the rack, and insert the inner slide rails of the server into the slide rails. Depending on the specifications and mounting location of the lifter, Step 9 (removing the pedestal at the bottom of the server) may need to be done beforehand.
Caution When you perform Step 6, keep the inner slide rails of the server and the slide rails of the rack in a horizontal position. If you forcibly insert, the rails may be damaged.
Caution When raising the server, do not grab the handle on the front. The handle on the front is to be used for pushing in or drawing out the server in the rack, and it is not designed to bear the weight of the server.
FIGURE 3-38
3-50
9. Loosen the eight screws securing the pedestal to the bottom of the server, and remove the two screws on the front. Slide the pedestal toward the rear and remove the pedestal.
FIGURE 3-39
Screw (x8)
Pedestal
3.6.5
Chapter 3
3-51
FIGURE 3-40
Magnified view of part B (3) (2) spring Turn the arm counterclockwise to secure the spring.
Counterclockwise
Unfixed position
Fixed position
3-52
4. Press the lock buttons on the slide rails to unlock the rails and insert the server into the rack.
FIGURE 3-41
Lock button
Chapter 3
3-53
5. Tighten four screws on the front to secure the server to the rack.
FIGURE 3-42
3-54
6. Attach the end caps onto the slide rails. For the SPARC Enterprise M4000 server, an end cap is attached to both the right and left rear rails.
Note The SPARC Enterprise M4000 server uses two end caps.
FIGURE 3-43
Chapter 3
3-55
8. Pass the power cord, which was connected in Step 7, through the cable holder on the rear right of the rack.
Note When it is the equipment rack model 1640/1620/1740, the shape of the cable holder differs from the figure below; however, pass the power cord through the cable holder.
FIGURE 3-44
Cable holder
3-56
(1)
Chapter 3
3-57
FIGURE 3-46
3.6.6
3-58
1. Attach the cable holding brackets in position on the rack columns. Secure the cable holding brackets using M5 screws and M5 rack nuts.
FIGURE 3-47
6 rack units
There are three holes in each 1U on the rack. In this procedure, each hole is expressed as shown in the following figure.
Lower hole on 5U Two locations on the rear left and right sides
Chapter 3
3-59
2. Press the lock buttons on the slide rails to unlock the rails and insert the server into the rack.
FIGURE 3-48
Lock button
3-60
3. Tighten four screws on the front to secure the server to the rack.
FIGURE 3-49
Chapter 3
3-61
4. Attach the end caps onto the slide rails. For the SPARC Enterprise M4000 server, an end cap is attached to both the right and left rear rails.
Note The SPARC Enterprise M4000 server uses two end caps.
FIGURE 3-50
3-62
6. Pass the power cord, which was connected in Step 5, through the cable holder on the rear right of the rack.
Note When it is the equipment rack model 1640/1620/1740, the shape of the cable holder differs from the figure below; however, pass the power cord through the cable holder.
FIGURE 3-51
Cable holder
Chapter 3
3-63
Method for securing cables other than the copper link cables
Use this method when copper link cables are not connected. 1. Bundle the cables with velcro strips at regular intervals. (See (1) in FIGURE 3-52.) 2. Move the cable holder on the rear right of the rack to the upper right of the server. (See FIGURE 3-53.) 3. Secure the cables with the cable holding brackets on the left and right sides. (See (3) and (4) in FIGURE 3-52.)
Note When drawing out the SPARC Enterprise M4000 Server to the front, release the velcro strip holding the PCI cables on the rear of the server. (See (3) in FIGURE 3-52.)
FIGURE 3-52
(2)
(3)
(4)
(1)
3-64
FIGURE 3-53
Fixing screw
Cable holder
Chapter 3
3-65
Note When drawing out the SPARC Enterprise M4000 Server to the front, release the velcro strip holding the PCI cables on the rear of the server. (See (3) in FIGURE 3-54.)
FIGURE 3-54
(4)
(3) (2)
(1)
3-66
FIGURE 3-55
Fixing screw
Cable holder
Chapter 3
3-67
3.7
Procedure for Mounting the SPARC Enterprise M5000 Server in the Rack
To mount the server in the equipment rack, use the parts shown on the following mount kit list.
3-68
3.7.1
Parts name
Required number
1, 10 2 3 4 5
8 16 16 8 6
Chapter 3
3-69
Parts name
Required number
6 7 8 9 11 12 13
bracket cable management arm (CMA) * slide rail cable bracket * M5 screw velcro strip end cap
4 1 2 2 4 14 4
Note If you connect copper link cables, you do not need to install the cable management arm. Store the cable management arm so as not to be missing.
3-70
Attaching brackets to the right column on the rear of the rack Depending on the positions where slide rails are attached, brackets may be attached to the right column on the rear of the rack. For details, see a. Attaching brackets to the right column on the rear of the rack (Equipment rack for SPARC Enterprise servers only) on page 3-76. The relevant bracket kit is shown below:
FIGURE 3-56
Bracket Kit That Is Attached to the Right Column on the Rear of the Rack
Parts name
Required number
1 2
Chapter 3
3-71
Parts name
Required number
3 4 5
1 2 2
3.7.2
Stopper bracket
Slide chassis
Level foot
End mark
Caution Be sure to pull the slide chassis all the way out to the point indicated by the end mark. If the slide chassis is not pulled all the way out to the end mark point, the equipment rack may topple over when drawing a server out from a rack.
Caution Make sure that there is no unevenness between the level feet of the slide chassis where they come into contact with the floor surface. If there is any unevenness between them where they come into contact with the floor surface, the equipment rack may topple over.
3-72
3.7.3
FIGURE 3-58
Magnified view
Chapter 3
3-73
2. Attach four screw plates to their corresponding locations on the slide rails (front right, front left, rear right, and rear left) with two M2.5 flathead screws at each location.
FIGURE 3-59
Screw (M2.5 x 8)
3-74
3. Secure the slide rails to the rack with screws (four M5 flathead screws at each of four locations) and washers (four at each of four locations). The same type of rail is used on both the right and left sides, and the rail can be fixed in position on either side. The bracket parts on the rear side are movable with the help of the springs, and the brackets must be fixed in position while opened.
FIGURE 3-60
Slide rail
Washer
Screw (M5)
Lower hole on 4U Lower hole on 3U Upper hole on 2U Upper hole on 1U The same for the front, rear, right, and left parts (16 locations)
Chapter 3
3-75
a. Attaching brackets to the right column on the rear of the rack (Equipment rack for SPARC Enterprise servers only) Check the right column on the rear of the rack with the rails attached to the rack. If the slide rails secured previously go across three L-brackets on the right column (Lbracket a, L-bracket b, and L-bracket c) as shown in the figure below, attach a bracket (small). For the attachment procedure, see b. Attaching a bracket (small) (Equipment rack for SPARC Enterprise servers only) on page 3-77.
FIGURE 3-61
Bracket (small)
Lower hole on 4U
L-bracket c
L-bracket a
3-76
b. Attaching a bracket (small) (Equipment rack for SPARC Enterprise servers only) i. Attach two M5 cage nuts to the lower hole on 5U and the upper hole on 6U on the right column of the rear of the rack. ii. Attach a bracket (small) to the right column of the rear of the rack using two M5 screws.
FIGURE 3-62
Upper hole on 6U
M5 screw
Lower hole on 5U
Bracket (small)
Attaching brackets
Chapter 3
3-77
5. Using the lifter to raise the server, align its height with the height of the slide rails. Slide the server in until the holes indicated as (1) in the server come into contact with pins on the slide rails. (See (1) in FIGURE 3-64.) Depending on the specifications and mounting location of the lifter, Step 9 (removing the pedestal at the bottom of the server) may need to be done beforehand.
Caution When raising the server, do not grab the handle on the front. The handle on the front is to be used for pushing in or drawing out the server in the rack, and it is not designed to bear the weight of the server.
FIGURE 3-63
3-78
6. When the pins are at the correct locations, slowly lower the server to set the pins in the holes.
FIGURE 3-64
7. Secure each slide rail with three M4 screws (total of six screws for both the right and left rails).
FIGURE 3-65
Screw (M4 x 6)
Chapter 3
3-79
8. Remove the lifter from the server. 9. Loosen the eight screws securing the pedestal to the bottom of the server, and remove the two screws on the front. Slide the pedestal toward the rear and remove the pedestal.
FIGURE 3-66
Screw (x8)
Pedestal
3-80
3.7.4
Apparatus required
Note If you connect copper link cables, you do not need to install the cable management arm. Store the cable management arm so as not to be missing.
Chapter 3
3-81
3.7.4.1
2. As shown in the figure, attach the one end of the CMA to the server with two knob screws.
3-82
3. Secure the other end of the CMA to the rail (on the right as viewed from the rear of the rack). Slide the CMA from the rear to move the four tabs on the rail into proper position, and tighten the two knob screws to secure the arm to the rail.
FIGURE 3-68
(1)
(3)
(2)
Chapter 3
3-83
4. Press the lock button on the slide rail in the direction indicated by the arrow to unlock the rail and insert the server into the rack.
FIGURE 3-69
Unlocking
Lock button
3-84
5. Tighten four screws on the front to secure the server to the rack.
FIGURE 3-70
Chapter 3
3-85
6. Attach the end caps onto the slide rails. For the SPARC Enterprise M5000 server, two end caps are attached to the rails on which the CMA is not attached.
Note If the CMA is not used, attach all end caps to the rails of the server. The SPARC Enterprise M5000 server uses four end caps.
FIGURE 3-71
Installing End Caps on the Left Rear of the SPARC Enterprise M5000 Slide Rails
3-86
8. Pass the power cord, which was connected in Step 7, through the cable holder on the rear right of the rack.
Note When it is the equipment rack model 1640/1620/1740, the shape of the cable holder differs from the figure below; however, pass the power cord through the cable holder.
FIGURE 3-72
Cable holder
Chapter 3
3-87
3.7.4.2
Install the cable bracket to the prescribed position on the rack column. Use M5 screw and M5 rack nut to attach the cable bracket.
FIGURE 3-73
3-88
1. Attach the cable holding brackets in position on the rack columns. Attach the cable holding brackets using M5 screws and M5 rack nuts.
FIGURE 3-74
Chapter 3
3-89
2. Press the lock button on the slide rail in the direction indicated by the arrow to unlock the rail and insert the server into the rack.
FIGURE 3-75
Unlocking
Lock button
3-90
3. Tighten the four screws on the front to secure the server to the rack.
FIGURE 3-76
Chapter 3
3-91
4. Attach the end caps onto the slide rails. For the SPARC Enterprise M5000 server, two end caps are attached to the rails on which the CMA is not attached.
Note If the CMA is not used, attach all end caps to the rails of the server. The SPARC Enterprise M5000 server uses four end caps.
FIGURE 3-77
Installing End Caps on the Left Rear of the SPARC Enterprise M5000 Slide Rails
3-92
6. Pass the power cord, which was connected in Step 5, through the cable holder on the rear right of the rack.
Note When it is the equipment rack model 1640/1620/1740, the shape of the cable holder differs from the figure below; however, pass the power cord through the cable holder.
FIGURE 3-78
Cable holder
Chapter 3
3-93
3.7.5
3.7.5.1
Note To draw the server out from the rack, release the fixation at (2) and (3) in FIGURE 3-80 and pull the server forward.
3-94
FIGURE 3-79
Fixing screw
Cable holder
Chapter 3
3-95
FIGURE 3-80
(3) (2)
(4)
(1)
3-96
3.7.5.2
Note To draw the server out from the rack, release the velcro fasteners which securing the cables to the lower part of the cable management arm and pull the server forward. (See (1) in FIGURE 3-82.)
FIGURE 3-81
(1)
Chapter 3
3-97
FIGURE 3-82
(1)
3-98
3.8
FIGURE 3-83
There are three holes in each 1U on the rack. In this procedure, each hole is expressed as shown in the following figure. 1RU
Upper hole on 1U Lower hole on 1U Rear surface (right and left sides: 4 locations in total)
Chapter 3
3-99
2. Insert the power distribution box through the rear of the rack, and secure it with four screws.
FIGURE 3-84
3.9
3-100
Note If a problem arises from the mounting of the SPARC Enterprise M3000/M4000/M5000 Servers including peripheral devices in a rack of another company, support for removing the problem is not covered by the warranty. Example: A cooling problem caused by insufficient cooling air supply due to the structure of another company's rack, earthquake proofing problem due to the insufficient strength of another company's rack, etc.
If the use of another company's rack is unavoidable, confirm that the rack whose use is under consideration satisfies the following structural requirements:
3.9.1
3.9.2
Chapter 3
3-101
(3) Length from the front rack columns to the inside surface of the rear rack cover SPARC Enterprise M3000 server: 930 mm (36.6 in.) or more (tentative) SPARC Enterprise M4000 server: 930 mm (36.6 in.) or more (tentative) SPARC Enterprise M5000 server: 930 mm (36.6 in.) or more (tentative) (4) Length from the rear rack columns to the inside surface of the rear rack cover External I/O Expansion Unit: 190 mm (7.5 in.) or more
FIGURE 3-85
(1)
(4)
(2)
3-102
FIGURE 3-86
Detailed Figure of the Slide Rail of the SPARC Enterprise M3000 Server
Bracket range
of movement: 690 (27.2) to 760 (29.9) Bracket front surface Unit: mm (in.) Rail length: 885 (34.8)
FIGURE 3-87
Detailed Figure of the Slide Rail of the SPARC Enterprise M4000 Server
Bracket range
of movement: 690 (27.2) to 760 (29.9) Bracket front surface
Unit: mm (in.)
Chapter 3
3-103
FIGURE 3-88
Detailed Figure of the Slide Rail of the SPARC Enterprise M5000 Server
Bracket range
of movement: 690 (27.2) to 760 (29.9) Bracket front surface
Unit: mm (in.)
FIGURE 3-89
Detailed Figure of the External I/O Expansion Unit Rack Mounting Rail
Unit: mm (in.)
3.9.3
3-104
FIGURE 3-90
Rack Column Requirements A: Space for affixing device front panel 483 mm (19.0in.) or more B: Space between right and left holes for affixing devices 465 mm (18.3in.) or more C: Space between right and left columns (same for front and rear columns) 450 mm (17.7in.) or more D: EIA Standard, universal pitch E: Side of square hole 9 - 9.5 mm (0.354 - 0.374 in.)
Unit: mm (in.)
3.9.4
3.9.5
Other Requirements
In addition to structural requirements, the following requirements must be taken into consideration:
Chapter 3
3-105
3.9.5.1
3-106
CHAPTER
Load Requirements of an Elevator on page 4-1 Earthquake Preparedness Measures on page 4-2
4.1
TABLE 4-1
Elevator code
Width
Depth
Height
Width
Height
4-1
TABLE 4-1
Elevator code
Width
Depth
Height
Width
Height
4.2
Fixing method: Method for preventing the equipment from falling over by fixing the equipment in position
Whether the method above must be used is determined depending on the following factors:
The degree of floor vibration at the installation site Whether a free access floor is used Equipment structure
When selecting an earthquake preparedness method and undertaking construction, consult with the construction department of Fujitsu. For details of earthquake preparedness measures, see the Earthquake Preparedness Measure Manual for Computers and other Devices (C109-H001EN).
4-2