Professional Documents
Culture Documents
3:1994
ISO/IEC 10164-3:1993
Information technology—
Open Systems Interconnection—
Systems management
Information technology—
Open Systems Interconnection—
Systems management
STANDARDS AUSTRALIA
1 The Crescent,
Homebush NSW 2140 Australia
PREFACE
This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee IT/1 on
Information Systems — Interconnection. It is identical with and has been reproduced from
ISO/IEC 10164-3:1993, Information technology—Open Systems Interconnection—Systems Management: Attributes
for representing relationships.
This Standard is issued as a Joint Standard under the terms of the Active Cooperation Agreement between
Standards Australia and Standards New Zealand.
The objective of this Standard is to provide users of OSI network management with specifications for attributes
for representing relationships and to establish a model that relates the service and generic definitions to user
requirements.
This Standard is Part 3 of AS/NZS 4152, Information technology — Open Systems Interconnection — Systems
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
management, which is published in the following parts (additional parts are being prepared):
This Standard is one of a series of Open Systems Interconnection (OSI) Standards which are currently under
development. Since OSI Standards are developmental, there may be some minor difficulties encountered in their
implementation. For this reason, Standards Australia will be providing, through the OSI Help Desk, a service to
coordinate and disseminate information concerning difficulties which are identified in using this Standard.
Users of this Standard are advised by Standards Australia and Standards New Zealand, under arrangements made
with ISO and IEC, as well as certain other Standards organizations, that the number of this Standard is not
reproduced on each page; its identity is shown only on the cover and title pages.
For the purpose of this Standard, the source text should be modified as follows:
(a) Terminology The words ‘this Australian/New Zealand Standard’ should replace the words ‘this International
Standard’ wherever they appear.
(b) Decimal marker Substitute a full point for a comma where it appears as a decimal marker.
(c) References The references to international Standards should be replaced by references, where appropriate,
to the following Australian or Joint Australian/New Zealand Standards:
ISO AS
7498 Informat i on processi ng syst ems— 2777 Inform at i on pro cessi ng syst ems—
Open Systems Interconnection— Op e n S ys tem s I n terc o nn ec tion —
Basic Reference Model Basic reference model
ISO/IEC
7498 Informat i on processi ng syst ems— 2777 Inform at i on pro cessi ng syst ems—
Op e n S ys tem s I n terc on nec tion— Op e n S ys tem s I n terc o nn ec tion —
Basic Reference Model Basic reference model
7498-4 Part 4: Management framework 2777.4 Part 4: Management framework
iii
ISO/IEC AS
8825 Information technology—Open Systems 3626 Information technology—Open Systems
Interconnection—Specification of Basic Interconnection—Specification of basic
Encoding Rules for Abstract Syntax encoding rules for Abstract Syntax Notation
Notation One (ASN.1) One (ASN.1)
CONTENTS
Page
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. .. . .. . 1
2.1 Identical Recommendations International Standards . . .. .. . .. . 2
2.2 Paired Recommendations International Standards . .. . .. .. . .. . 2
2.3 Additional references . . . . . . . . . . . . . . . . . . . . . . .. . .. .. . .. . 2
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Model . . . . . . . . . . . . . . . . . . . .. .. . . ... . . . .. . . . . . . . . .. .. . . 5
7.1 General . . . . . . . . . . . . . . . . ... . . ... . . . .. . . . . . . . . .. .. . . 5
7.2 Categories of relationships . ... . . . .. . . . . .. . . . . . . . . .. .. . . 6
7.3 Types of relationships . . . . .. .. . . . .. . . . .. . . . . . . . . .. .. . . 8
7.4 Relationship roles . . . . . . . .. .. . . ... . . . .. . . . . . . . . .. .. . . 9
8 Generic definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.1 Generic attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8.2 Generic notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.3 Managed objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.4 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9 Service definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.2 Management of relationship attributes . . . . . . . . . . . . . . . . . . . . 14
10 Functional units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11 Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . .. . . 14
11.1 Elements of procedure . . . . . . . . . . . . .. . . . . . . . . . . . . . .. . . 14
11.2 Abstract syntax . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . .. . . 15
11.3 Negotiation of functional units . . . . . . .. . . . . . . . . . . . . . .. . . 16
13 Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
13.1 General conformance class requirements . . . . . . . . . . . . . . . . . . 17
13.2 Dependent conformance class requirements . . . . . . . . . . . . . . . . 17
1
1 Scope
This Recommendation International Standard defines a systems management function which may be used by an
application process in a centralized or decentralized management environment to interact for the purpose of systems-
management as defined by CCITT Rec. X.700 ISO/IEC 7498-4. This Recommendation International Standard
defines the attributes for representing relationships and consists of services and generic definitions. It is positioned in
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
the application layer of CCITT Rec. X.200 ISO/IEC 7498 and is defined according to the model provided by
ISO/IEC 9545. The role of systems management functions are described by CCITT Rec. X.701 ISO/IEC 10040.
2 Normative references
The following CCITT Recommendations and International Standards contain provisions which, through reference in this
text, constitute provisions of this Recommendation International Standard. At the time of publication, the editions
indicated were valid. All Recommendations and Standards are subject to revision, and parties to agreements based on
this Recommendation International Standard are encouraged to investigate the possibility of applying the most recent
editions of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently
valid International Standards. The CCITT Secretariat maintains a list of the currently valid CCITT Recommendations.
COPYRIGHT
This is a free preview. Purchase the entire publication at the link below:
relationships