You are on page 1of 10

ALE SETUP FROM CLIENT TO CLIENT.

Compiled By dhanu_kattoor

Steps in ALE setup. I. Define Logical System. II. Assign Client to Logical System. III. Define Target Systems for RFC Calls. IV. Maintain Distribution Model and Distribute Views . V. Send Material using corresponding transaction. Before starting. Task: a meterial is sending from CLIENT 000 to CLIENT 800 using MATMAS. So CLIENT 000 is the sending system and CLIENT 800 is the receiving system. I. Define logical systems. 1. Login in two clients ie, CLIENT 000 and CLIENT 800. 2. In CLIENT 000 execute TCODE " SALE ". A session with following screen component will display. Screen ALE_01

3. Expand Sending and Receiving Systems. Expand Logical Systems.

Screen ALE_02

4 . Execute Define Logical System. 5. Click New Entries. 6. Create Two Logical systems one for sending client and one for receiving client. Screen ALE_03

7 . Save it and come back. 8. Execute Assign Client to Logical System.. 9. Click New Entries. 10. Assign Client 000 as sending Logical Sytem.

Screen ALE_04

11 . Save and Come back. 12. Assign Client 800 as Receiving Logical System. Screen ALE_05

13. Save and come back to Screen ALE_02. 14. Expand Systems in Network. 15. Execute Define Target Systems for RFC Calls. It will show all the possible RFC Destinations.

Screen ALE_06

16.Select R/3 connections and Click Create Button. Give the Destination , Connection type .. etc as given. Screen ALE_07

16. Press ENTER and u will get the Technical Settings expanded as below.

Screen ALE_08

17. Give the Target host as HostName or IP address. System number as 00. 18. Do same settings for LSY_SEND also as below. Screen ALE_09

Save the settings and come back to screen ALE_02.

IV. Maintain Distribution Model and Distribute Views . Expand Maintain Distribution Model and Distribute Views Screen ALE_10

19. You will be in Distribution Model maintenance Screen. 20. Click 21. Click 22. Give settings as below. Press Screen ALE_11 Button to activate the Application tool bar buttons. Button.

23. Select

New model view and SAVE it.

Screen ALE_12

26.Click

27. Give settings as below. Press Screen ALE_13

28. Save it. If you Expand the new Model view it will be a below. Screen ALE_14

29. Select Environment from menu and select Generate partner profiles. Screen ALE_15

30. Press F8. It will automatically select Partner system. ( No need to give it). If all settings are OK ypu will get the following Confirmation. NB: If the port is already exists it may not create again. Screen ALE_16

31. Come back to Screen ALE_14. Select Edit -- Model view Transport

Screen ALE-17

32. Give The CRN and Press . 33. Select Edit -- Model view Distribute. Press . And You will get one confirmation message.

Now All the settings for Client 000 is Over. Come to Client 800 and repeat Steps 28 to 30 to create Partner Profile . IV. Maintain Distribution Model and Distribute Views . 34. 35. Come to Client 000 and select Tcode BD10. ( Send Material). Select One material and press F8.

Screen ALE-18

36. You will get the following Information. Press Screen ALE-18

37. You will get the following Information. Press Screen ALE-19

38. Now The Material will be in Client 800. Go to Tcode MM03 and display the material.

Any further clarification contact dhanu_kattoor at dhanu_kattoor@yahoo.com +91 94484 83583

You might also like