Professional Documents
Culture Documents
Copyright 2008 ROLAND CORPORATION * All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. * Microsoft and Windows are registered trademarks of Microsoft Corporation. * The screen shots in this document are used in compliance with the guidelines of the Microsoft Corporation. * Windows is known officially as: Microsoft Windows operating system.
12
M1
16
M2
20
M3
24
M4
28
F1
29
F2
30
F3
31
F4
32
E1
33
E2
38
E3
43
E4
Sample_x.mid 1 2 6
I1 I2 I3
8
I4
12
M1
16
M2
20
M3
24
M4
28
F1
29
F2
30
F3
31
F4
32
E1
33
E2
38
E3
43
E4
Sample_7.mid 1 2 6
I1 I2 I3
8
I4
12
M1
16
M2
20
M3
24
M4
28
F1
29
F2
30
F3
31
F4
32
E1
33
E2
38
E3
43
E4
Divisions
INTRO for VARIATION 1 INTRO for VARIATION 2 INTRO for VARIATION 3 INTRO for VARIATION 4 MAIN for VARIATION 1 MAIN for VARIATION 2 MAIN for VARIATION 3 MAIN for VARIATION 4 FILL for VARIATION 1 FILL for VARIATION 2 FILL for VARIATION 3 FILL for VARIATION 4 ENDING for VARIATION 1 ENDING for VARIATION 2 ENDING for VARIATION 3 ENDING for VARIATION 4
Procedure
1. From the Sample folder on the CD-ROM, copy "sample_*.mid" to the hard disk of your computer. 2. Using SMF editing software such as SONAR, open the "sample_m.mid" that you copied. 3. Measures 24--27 (MAIN for VARIATION 4) of MIDI channel 1 are empty. Go ahead and enter musical data as desired. The musical data you've entered here will be converted into a style musical data on the GW-8. 4. Save the file.
If you use the GW-8 as a MIDI Sound Module, press [SONG] to put the GW-8 in Song mode.
Measure
1 4 2 4 4 4 4 4
Division
FILL for VARIATION 1 FILL for VARIATION 2 FILL for VARIATION 3 FILL for VARIATION 4 ENDING for VARIATION 1 ENDING for VARIATION 2 ENDING for VARIATION 3 ENDING for VARIATION 4
Measure
1 1 1 1 1 5 5 5
5. When the conversion is completed, the style file "sample.stl" and the division file "sample.dv3" will be created in the same folder as "sample_m.mid." 6. Via USB memory, import the style file "sample.stl" into the GW-8.
*For more information, refer to the GW-8 owners manual.