Professional Documents
Culture Documents
M 50
= = 20 mm 1 (Enter 1 for crushed(angular), 2 for rounded) 3 (Enter 1 for Zone I, 2 for Zone II, 3 for Zone III, 4 for Zone IV)
3.13 2.63 2.82 2 (Enter 1 for Mild, 2 for Moderate, 3 for Severe, 4 for Very severe, 5 for Ex
0.8
After correction is applied Water content (assuming ssd agg.) (W) Sand to Total agg. ratio (p x 100)
180 Kg
22.5 %
V = [ W + C/Sc + 1/p. fa/Sfa ] x 1/1000 (for calculating fine aggregate content) Absolute Volume of fresh concrete Sand content (fa) = = 0.98 359.965 Kg
V = [ W + C/Sc + 1/(p-1). Ca/Sca ] x 1/1000 (for calculating Coarse aggregate content) Coarse aggregate content (Ca) = 1329.45 Kg
The mix proportion as worked out as per IS 10262-1982 is Wt/cum 1kg of cem 50kg of cem Water 180 0.3 15 Cement 600 1 50 Fine aggregate 359.965 0.599942 29.99712 Coarse aggregate 1329.45 2.215757 110.7879
262-1982)
sults as 1 in 20
vol. of concrete
Approximate air content Nominal MSA Entrapped air Water content FA/TA 10 3 208 20 2 186 40 1 165
40 35 30
s in fck+t * s expression=
28 day strength verses water cement ratio 51 0.3 43 0.35 40 0.37 36.5 0.4 31 0.45 30 0.46 26 0.5 25 0.515 22.5 0.55 20 0.59 19 0.6 16.5 0.65 fck bar= upper lmt lower lmt intrapolation for w/c ratio 58.25 51 51 0.3
0.3 0.3
51 26
0.3 0.5
180 correction 25
zone of sand Comp.fact W/C ratio rounded Tot Corr 0 0 0 0 0 -1.5 0 -1 0 -2.5