Professional Documents
Culture Documents
BIOS Setup .................................................................................................1 1 Main Menu...............................................................................................3 2 Advanced Menu.......................................................................................7 3 PCIPnP Menu........................................................................................16 4 Boot Menu..............................................................................................19 5 Chipset Menu.........................................................................................21 6 T-S eries Menu........................................................................................30 7 Exit Menu...............................................................................................44
BIOS Setup
Introduction
T he purpose of this manual is to describe the settings in the AMI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. T he power of CMOS RAM is supplied by a battery so that it retains the Setup information when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk. T his system controls most of the input and output devices such as keyboard, mouse, serial ports and disk drives. BIOS activates at the first stag e o f the booting process, loading and executing the operating system. Some additional features, such as virus and password prot ection or chipset fine-tuning options are also included in BIOS. T he rest of this manual will to guide you through the options and settings in BIOS Setup.
APM Support
T his AMI BIOS supports Version 1.1&1.2 of the Advanced Power Man agement (APM) speci fication. Power management features are implemented via the System Management Int errupt (SMI). Sleep and Suspend power man agement modes are supported. Power to the hard disk drives and video monitors can also be managed by this AMI BIOS.
ACPI Support
AMI ACPI BIOS support Version 1.0/2.0 of Advanced Configuration and Power interf ace specifi cation (ACPI). It provides ASL code for pow er manag ement and device con figuration capabilities as defined in the ACPI specification, developed by Microso ft, Intel and T oshiba.
DRAM S upport
DDR2 SDRAM (Double Data Rate II Synchronous DRAM) is supported.
Supported CP Us
T his AMI BIOS supports the AMD CPU .
Using Setup
When starting up the computer, press <Del> during the Power-On Self-Test (POST) to enter the BIOS setup utility. In the BIOS setup utility, you will see General Help description at the top right corner, and this is providing a brief description of the selected item. Navigation Keys for that particular menu are at the bottom right corner, and you can use these keys to select item and ch ange the settings.
Notice
T he default BIOS settings apply for most conditions to ensure optimum performan ce of the motherboard. If the system becomes unstable after changing any settings, please load the default settings to ensure systems compatibility and stability. Use Load Setup Default under the Exit Menu. For better system perform ance, the BIOS firmware is being continuously updated. T he BIOS information described in this manual is for your reference only. T he actual BIOS information and settings on board may be slightly different from this manual. T he content of this manual is subject to be chang ed without notice. We will not be responsible for any mistakes found in this users manual and any system damage that may be caused by wrong-settings.
1 Main Menu
Once you enter AMI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system inform ation.
Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset T-Series Exit
System Overvie w AMI BIOS Version :01. 01.01 Build Date:01/ 01/08 System Memory Size : System Time System Date Floppy A > Hard Drive C onfiguration [00: 00:00] [Tue 01/01/2008]
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time.
S elect Screen S elect Item C hange Field S elect Field G eneral Help S ave and Exit E xit
AMI BIOS
Shows system information, including BIOS version and built date.
System Memory
Shows system memory size.
System Time
Set the system internal clock.
System Date
Set the system date. Note that the Day automatically changes when you set the date.
Floppy A
Select the type of floppy disk drive installed in your system. Options: 360K, 5.25 in / 1.2M, 5.25 in / 720K, 3.5 in / 1.44M, 3.5 in / 2.88M, 3.5 in / None
Select Screen Select Item Enter Go to Sub Screen General Help F1 F10 Save and Exit ESC Exit
Type [Auto] LBA/Large Mode [Auto] Block (Multi-Sector Transfer)[Auto] PIO Mode [Auto] DMA Mode [Auto] S.M.A.R.T [Auto] 32Bit Data Transfer [Enabled] +F1 F10 ESC
Select Screen Select Item Change Option General Help Save and Exit Exit
T he BIOS detects the information and values of resp ective devices, and these information and values are shown below to the name of the sub-menu. Type Select the type of the IDE/SAT A drive. Options: Auto (Default) / CDROM / ARMD / Not Installed LBA/Large Mode Enable or disable the LBA mode. Options: Auto (Default) / Disabled Block (MultiSector Transfer) Enable or disable multi-sector trans fer. Options: Auto (Default) / Disabled PIO Mode Select the PIO mode. Options: Auto (Default) / 0 / 1 / 2 / 3 / 4 DMA Mode Select the DMA mode. Options: Auto (Default) / SWDMA0 ~ 2 / MWDMA0 ~ 2 / UDMA0 ~ 5 S.M.A.R.T Set the Smart Monitoring, Analysis, and Reporting T echnology. Options: Auto (Default) / Disabled / Enabled
2 Advanced Menu
T he Advanced Menu allows you to configu re the settings of CPU, Super I/O, Power Management, and other system devices.
Notice
Beware of that setting inappropriate values in items of this menu may cause system to malfunction.
Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset T-Series Exit
Advanced Setti ngs WARNING: Setti ng wrong values in below sections may c ause system to malf unction. > > > > > > CPU Configur ation SuperIO Conf iguration Smart Fan Co nfiguration Hardware Hea lth Configuration Power Config uration USB Configur ation
S elect Screen S elect Item EnterG o to Sub Screen G eneral Help F1 F10 S ave and Exit ESC E xit vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc.
CPU Configuration
T his item shows the CPU information that the BIOS automatically detects.
Advanced CPU C onfiguration Modul e Version: AGESA Version: Physi cal Count: Logic al Count: AMD C PU Revis ion: Cache L1: Cache L2: Cache L3: Speed : NB Clk: ncHT Speed : Width I/O : Able to Change Fre q : uCode Patch Level : Secur e Virtual Mac hine Mode [ Enabled] Cool N Quiet [ Enabled] ACPI SRAT Table [ Enabled] BIOS S ETUP UTILITY Enab le/Disable Secu re Virtual M achine Mode (SVM)
+F1 F1 0 ES C
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
SuperIO Configuration
Advanced BIOS S ETUP UTILITY Allo ws BIOS to E nable or D isable Flopp y Cont roller Confi gure ITE8718 Super IO Chi pset Onboa rd Floppy Con troller Keybo ard PowerOn Mouse PowerOn Resto re on AC Powe r Loss [ Enabled] [ Disabled] [ Disabled] [ Power Off]
+F1 F1 0 ES C
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Onboard Floppy Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. Options: Enabled (Default) / Disabled Keyboard Pow erOn T his item allows you to control the keyboard power on function. Options: Disabled (Default) / Specific Key / Stroke Key Specific Key Enter T his item will show only when Keyboard PowerOn is set Specific Key. Stroke Keys Selected T his item will show only when Keyboard PowerOn is set Stroke Key. Options: Ctrl+F1 (Default) / Wake Key / Power Key / Ctrl+F2 / Ctrl+F3 / Ctrl +F4 / Ctrl+F5 / Ctrl+F6
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
CPU Smart Fan T his item allows you to control the CPU Smart Fan function. Options: Disabled (Default) / Auto / 4-pin / 3-pin Smart Fan C alibration Choose this item and then the BIOS will auto test and detect the CPU/System fan fun ctions and show CPU/System fan speed.
10
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
11
Power Configuration
Advanced ACPI Settings Suspe nd mode ACPI Version Featu res ACPI APIC support AMI O EMB table Headl ess mode [ S1 (POS)] [ ACPI v1.0] [ Enabled] [ Enabled] [ Disabled] BIOS S ETUP UTILITY Sele ct the ACPI stat e used for Syst em Suspend.
RTC R esume [ Disabled] RTC A larm Date(Day s) RTC A larm T ime USB W akeup From S3 /S4 [ Disabled] Power On by PCIE/O nboard LAN [ Disabled] Wake Up by PCI [ Enabled]
+F1 F1 0 ES C
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Suspend mode T he item allows you to select the suspend type under the ACPI operating system. Options: S1 (POS) (Default) Power on Suspend S3 (ST R) Suspend to RAM S1 & S3 POS+STR ACPI Version Features T he item allows you to select the version of ACPI. Options: ACPI v1.0 (Default) / ACPI v2.0
12
13
USB Configuration
T his item shows the USB controller and using USB device information.
Advanced USB C onfiguration Modul e Version - 2 .24.3-13.4 USB D evices Enable d: Legac y USB Support USB 2 .0 Controller Mode BIOS EHCI Hand-Off [ Enabled] [ HiSpeed] [ Enabled] S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit BIOS S ETUP UTILITY Enab les support for lega cy USB. AUTO opti on disables lega cy support i f no U SB devices a re conn ected.
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Legacy USB Support T his item determines if the BIOS should provide legacy support fo r USB devices like the keyboard, mouse, and USB drive. T his is a useful feature when using such USB devices with operating systems that do not natively support USB (e.g. Microso ft DOS or Windows NT). Options: Enabled (Default) / Disabled USB 2.0 Controller Mode T his item allows you to select the operation mode of the USB 2.0 controller. Options: HiSpeed (Default) USB 2.0-480Mbps FullSpeed USB 1.1-12Mbps BIOS EHCI Hand-Off T his item allows you to enable support for operating systems without an EHCI hand-o ff feature. Options: Enabled (Default) / Disabled
14
USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Device # Emulation Type [Auto]
Select Screen Select Item Change Option General Help Save and Exit Exit
USB Mass Storage Reset Delay T his item allows you to set the reset delay for USB mass storage device. Options: 20 Sec (Def ault) / 10 Sec / 30 Sec / 40 Sec Emulation Type T his item allows you to select the emulation type of the USB mass storage device. Options: Auto (Default) / Floppy / Forced FDD / Hard Disk / CDROM
15
3 PCIPnP Menu
T his section describes con figuring the PCI bus system. PCI, or Personal Computer Interconn ect, is a system which allows I/O devices to operate at speeds nearing the speed o f the CPU itself uses when communicating with its own special components.
Notice
Beware of that setting inappropriate values in items of this menu may cause system to malfunction.
Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset T-Series Exit
Advanced PCI/P nP Settings WARNING: Setti ng wrong values in below sections may c ause system to malf unction. Clear NVRAM Plug & Play O/ S PCI Latency Ti mer Allocate IRQ t o PCI VGA Palette Snoopi ng PCI IDE BusMas ter > PCI Resource [No] [No] [64] [Yes ] [Dis abled] [Ena bled]
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
Clear NV RAM
T his item allows you to clear the data in the NVRAM (CMOS) by selecting Yes. Options: No (Default) / Yes
16
Palette Snooping
Some old graphic controllers need to snoop on the VGA palette and then map it to their display as a way to provide boot inf ormation and VGA compatibility. This item allows such snooping to take place. Options: Disabled (Default) / Enabled
PCI Resource
PCIPnP PCI Resource IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15 DMA DMA DMA DMA DMA DMA Channel Channel Channel Channel Channel Channel 0 1 3 5 6 7 [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Disabled] BIOS SETUP UTILITY Available: Specified IRQ is available to be used by PCI/PnP devices. Reserved: Specified IRQ is reserved for use by Legacy ISA devices.
Select Screen Select Item Change Option General Help Save and Exit Exit
17
18
4 Boot Menu
T his menu allows you to setup the system boot options.
Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series Exit
Boot Settings Conf iguration > > > > Boo t Device Prio rity Har d Disk Drives Rem ovable Drives CD/ DVD Drives [ Enabled] [ Enabled] [ Force BIOS] [ ON] [ Enabled] [ Disabled] [ Enabled]
Quick Boot Full Screen LOGO S how AddOn ROM Display Mode Bootu p Num-Lock Inter rupt 19 Captu re Ignor e Memory Erro r Messages BOOT SUCCESS BEEP
S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Removable Drives
T he BIOS will attempt to arrange the removable drive boot sequence automatically. You can also change the booting sequence. The number of device items that appears on the screen depends on the number of devices installed in the system. Options: Floppy Disks / Zip100 / USB-FDD0 / USB-FDD1 / USB-ZIP0 / USB-ZIP1 / LS120
19
CD/DV D Drives
T he BIOS will attempt to arrange the CD/DVD drive boot sequence automatically. You can also change the booting sequence. The number of device items that appears on the screen depends on the number of devices installed in the system. Options: Pri. Master / Pri. Slave / Sec. Master / Sec. Slave / USB CDROM0 / USB CDROM 1
Quick Boot
Enabling this option will cause an ab ridged version o f the Power On Sel f-T est (POST ) to execute after you power up the computer. Options: Enabled (Default) / Disabled
Bootup Num-Lock
Selects the NumLock State after the system switched on. Options: ON (Default) / OFF
Interrupt 19 Capture
When set to Enabled, this item allows the option ROMs to trap interrupt 19. Options: Enabled (Default) / Disabled
20
5 Chipset Menu
T his submenu allows you to configure the speci fic features of the chipset installed on your system. T his chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus.
Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series Exit
Advan ced Chipset S ettings > Sou thBridge Conf iguration > AMD 790GX Config uration > OnB oard Peripher als Configur ation
S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
SouthBridge Configuration
BIOS S ETUP UTILITY Chips et > SB Azalia Audio Configuratio n OHCI HC(Bus 0 Dev 18 Fn OHCI HC(Bus 0 Dev 18 Fn EHCI HC(Bus 0 Dev 18 Fn OHCI HC(Bus 0 Dev 19 Fn OHCI HC(Bus 0 Dev 19 Fn EHCI HC(Bus 0 Dev 19 Fn OHCI HC(Bus 0 Dev 20 Fn OnChi p SATA Channe l OnChi p SATA Type SATA IDE Combined Mode Power Saving Featu res SB CI M Version o) 1) 2) 0) 1) 2) 5) [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Native IDE] [ Enabled] [ Disabled] Opti ons for SB H D Azal
S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
21
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
HD Audio Azalia Device T his item allows you to control the HD audio device. Options: Enabled (Default) / Auto / Disabled OHCI HC(Bus 0 Dev 18/19/20 Fn 0/1/5) Options: Enabled (Default) / Disabled
OnChip SATA Channel T his option allows you to enable the on-chip Serial AT A. Options: Enabled (Default) / Disabled OnChip SATA Type T his option allows you to select the on-chip Serial AT A operation mode. Options: Native IDE (Default) / RAID / AHCI / Legacy IDE / IDE AHCI
22
SATA IDE Combined Mode T his option controls the SAT A/PAT A combined mode. Options: Enabled (Default) / Disabled Power Saving Features Disable / Enable power saving features in SB. As general rule, this feature should be disabled for desktop and enabled fo r mobile. See AMD SB700 Power Saving document fo r more details. Options: Disabled (Default) / Enabled
NB Po wer Managemen t Features [ Auto] S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
23
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Internal Graphics Mode T his item allows you to select the memory mode used for internal graphi cs device. Options: UMA (Default) / SIDEPORT / UMA+SIDEPORT / Disable UMA Frame Buffer Size T his item allows you to choose the UMA frame buffer size for internal graphics. Options: Auto (Default) / 32MB / 64MB / 128MB / 256MB / 512MB SIDEPORT Clock Speed T his item allows you to choose the SIDEPORT Clock Speed for internal graphics. Options: 400MHz (Default) / 333MHz+ / 350MHz / 366MHz / 425MHz / 450MHz / 466MHz / 500MHz / 533MHz UMA-SP Interleave Mode AutoFine interleave Ratio/Size selected based on system configuration (HT Frequency, number o f memory channel). Options: Auto (Default) / Coarse / Fine Interleave Size Interleave size out of SP memory. Interleave size for UMA calculate bas e on interleave ratio. Options: Auto (Default) / 4MB / 8MB / 16MB / 32MB / 64MB / 128MB
24
25
S elect Screen S elect Item EnterU pdate F1 G eneral Help F10 S ave and Exit ESC E xit
GFX Dual Slot Configuration Options: Disabled (Default) / Auto / Enabled GPP Slots Power Limit, W Options: 25 (Default) / 0-255 Port #02/04/05/06/07/09/10 Features
BIOS SETU P U TILITY Chipset Gen2 High Spee d Mode Link ASPM Link Width Slot Power Lim it, W Compliance Mod e [Aut o] [Dis abled] [Aut o] [75] [Dis abled] Auto - RC only advertize Gen2 capability.
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
Gen2 High Speed Mode Options: Auto (Default) / Disabled / Software Initiated / Advertised RC
26
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
NB-SB Link ASPM Options: L1 (Default) / Disabled NP NB-SB VC1 Traffic Support Options: Disabled (Default) / Enabled Link Width Options: Auto (Default) / x1 / x2 / x4 Compliance Mode Options: Disabled (Default) / Enabled
27
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
HT Link Tristate Options: Auto (Default) / Disabled / CAD/CT L / CAD/CT L/CLK UnitID Clumping Options: Auto (Default) / Disabled / PCIE / GFX / PCIE & GFX 2x LCLK Mode Options: Disabled (Default) / Enabled Primary Video Controller T his option allows you to select the video controller in charge. Options: PCI-GFX0-GPP-IGFX (Default) / GFX0-GPP-IGFX-PCI / GPP-GFX0-IGFX-PCI / IGFX-GFX0-GPP-PCI NB Power Management Features T his option controls the NB power management function. Options: Auto (Default) / Disabled
28
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
MAC ID Information T his area shows the MAC ID. Realtek PCIE NIC T his option allows you to control the onboard LAN controller. Options: Enable (Default) / Disable Realtek Option ROM T his item allows you to enable or disable the Onboard LAN Boot ROM. Options: Disabled (Default) / Enabled Onboard FireWire T his option allows you to control onboard FireWire. Options: Enabled (Default) / Disabled
29
6 T-Series Menu
T his submenu allows you to change voltage and clock of various devices. (Howev er, we suggest you use the default setting. Changing the voltage and clock improperly may damage the device.)
Notice
Beware of that setting inappropriate values in items of this menu may cause system to malfunction.
Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series Exit Options Norm al Auto mate OverClo ck Manu al OverClock
T-Ser ies Settings WARNI NG: Setting w rong values in below sec tions may cause system to m alfunction. OverC lock Navigato r [ Normal] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] ATIG Reference Clo ck (MHz) [ 100] [100] SB Reference Clock (MHz) Sprea d Spectrum [ Disabled] > G.P .U Phase Cont rol > CPU FID/VID Cont rol > Vol tage Configua tion > DRA M Timing Conf iguration > Hyp er Transport Configuratio n
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
OverClock Navigator
OverClock .Navigator is designed for beginners in overclock field. Based on many test and experiments from Biostar Engineer Team, OverClock Navigator provid es 3 default overclo ck con figurations that are able to raise the system perfo rmance. Options: Normal (Default) / Automate OverClock / Manual OverClock
30
T-Ser ies Settings WARNI NG: Setting w rong values in below sec tions may cause system to m alfunction. OverC lock Navigato r [ Automate Ove rClock] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] ATIG Reference Clo ck (MHz) [ 100] SB Re ference Clock (MHz) [ 100] Sprea d Spectrum [ Disabled] > G.P .U Phase Cont rol > CPU FID/VID Cont rol > Vol tage Configua tion > DRA M Timing Conf iguration > Hyp er Transport Configuratio n
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
T he Overclock Navig ator provides 3 different engines helping you to overclock your system. T hese engines will boost your system perf orman ce to different level. Options: V6 Tech Engine T his engine will make a good over-clock perfo rmance. V8 Tech Engine T his engine will make a better over-clo ck perfo rmance. V12 T ech Engine T his engine will make a best over-clock performance.
Cautions:
Not every AMD CPU performs the a bove overclock setting ideally; the diff erence may vary with the installed CP U model.
31
T-Ser ies Settings WARNI NG: Setting w rong values in below sec tions may cause system to m alfunction. OverC lock Navigato r [ Manual OverC lock] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] ATIG Reference Clo ck (MHz) [ 100] SB Re ference Clock (MHz) [ 100] Sprea d Spectrum [ Disabled] > G.P .U Phase Cont rol > CPU FID/VID Cont rol > Vol tage Configua tion > DRA M Timing Conf iguration > Hyp er Transport Configuratio n
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
MOS is designed for experienced overclock users. It allows users to customize personal overclock setting.
CPU Configuration
T his item allows you to save CPU configuration. Options: Auto (Default) / Configure 1~7
Spread Spectrum
T his item allows you to control Spread Spectrum f ction. un Options: Disabled (Default) / Enabled
32
CPU V core: : Curre nt CPU Power : Effic iency : G.P.U Phase Mode [ Auto] S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
G.P.U Phase Mode T his item allows you to control G.P.U Phase Mode (power saving technololy). Options: Auto (Default) / Off
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
33
NB FID T his item allows you to select the Frequency o f NB chip. Options: 2000MHz (Default) / 800MHz ~ 2000MHz NB VID Set the voltage to use for NB PState selected Value is saved in the _PSS object.. Options: 1.2000V (Default) / 0.0125V ~ 1.3250V. NB DID Options: Divided by 1 (Default)
34
Voltage Configuration
BIOS S ETUP UTILITY Volta ge Configurat ion CPU V core NB FI D Voltage Memor y Over Volt age Side Port Over Vol tage Chips et Over Volta ge HT Ov er Voltage [A uto] [1 .200 [A uto] [1 .800 [1 .200 [1 .200 V] V] V] V] T-Series CPU Vcore Contro l
+F1 F1 0 ES C
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
CPU Vcore T his item allows you to select CPU Voltage Control. Options: Auto (Default) / +0.020V ~ +1.260V (Interval: 0.020V) NB FID Voltage T his item allows you to select NB FID Voltage Control. Options: 1.200V (Default) / 1.220V ~ 2.200V (Interval: 0.020V) Memory Over Voltage T his item allows you to select DDR Over Voltage Control. Options: Auto (Default) / 1.660V ~ 2.840V (Interval: 0.020V) Side Port Over Voltage T his item allows you to select Side Port Over Voltage Control. Options: 1.800V (Default) / 1.820V ~ 2.700V (Interval: 0.020V) Chipset Over Voltage T his item allows you to select NB/SB Over Voltage Control. Options: 1.200V (Default) / 1.220V ~ 2.300V (Interval: 0.020V)
35
Memory Clock Mode T his item allows you to control the Memory Clock. Options: Auto (Default) / Manual / Limit Memclock Value T his item allows you to set the Memory Clock. Options: DDR3-800 (Default) / DDR3-1066 / DDR3-1333 / DDR3-1600 / Auto DRAM Timing Mode T his item allows you to choose to manually or automatically regul ate the DRAM T iming. Options: Auto (Default) / DCT0 / DCT1 / Both CAS Latency (CL) Options: Auto (Default) / 4~12 CLK
36
37
tRFC0 / tRFC1 / tRFC2 / tRFC3 Options: Auto (Default) / 90ns / 110ns / 160ns / 300ns / 350ns
[Aut o] [Aut o]
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
Link Speed Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz / 1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz
38
Memory Configuration
BIOS S ETUP UTILITY Memor y Configurati on Bank Interleaving Chann el Interleavi ng Enabl e Clock to Al l DIMMs MemCl k Tristate C3 /ATLVID Memor y Hole Remapp ing DCT U nganged Mode Power Down Enable Pow er Smashing > ECC Configuratio n [ Auto] [ XOR of Addre ss bit]] [ Disabled] [ Disabled] [ Enabled] [ Always] [ Disabled] [ Disabled] T-Series Enab le Bank Memo ry Inte rleaving
S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Bank Interleaving Bank Interleaving is an advanced chipset technique used to improve memory perform ance. Memory interleaving increases bandwidth by allowing simultaneous access to more than one piece of memory. Options: Auto (Default) Channel Interleaving T his item allows you to control the DDR2 dual-channel function. Options: XOR of Address bits [20:16, 6] (Default) / XOR of Address bits [20:16, 9] / Address bits 6 / Address bits 12 / Disabled Enable Clock to All DIMMs T his item determines whether the BIOS should actively reduce EMI (Electromagn etic Interference) and reduce power consumption by turning off unoccupied or inactive DIMM slots. Options: Disabled (Default) / Enabled MemClk Tristate C3/ATLVID T his item enables or disables the MemClk T ristate function in C3 Mode. Options: Disabled (Default) / Enabled
39
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
40
EC Configuration
BIOS SETU P U TILITY SureBoot Featu re SureBoot Timeo ut Advanced Clock Calibration Value (All C ores) Value (Core 0) Value (Core 1) Value (Core 2) Value (Core 3) [Ena bled] [4 S econds] [Dis abled] [- 2 %] [- 2 %] [- 2 %] [- 2 %] [- 2 %] T-Series Options Disabled Enabled
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
SureBoot Feature T his item allows you to control the SureBoot function. SureBoot is a technology that ensures a complete Windows environment will be available disaster recovery situations. Options: Enabled (Default) / Disabled
41
42
OverC lock Navigato r [ Normal] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] ATIG Reference Clo ck (MHz) [ 100] SB Re ference Clock (MHz) [ 100] Sprea d Spectrum [ Disabled] > G.P .U Phase Cont rol > CPU FID/VID Cont rol > Vol tage Configur ation > DRA M Timing Conf iguration > Hyp er Transport Configuratio n > Mem ory Configura tion > EC Configuration GFX E ngine Clock O verride [ Disabled] Integ rated Memory Test [ Enabled]
+F1 F1 0 ES C
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Step 2: When the process is done, change the setting back from Enabled to Disabled to complete the test.
Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series Exit Options Enab led Disa bled
OverC lock Navigato r [ Normal] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] ATIG Reference Clo ck (MHz) [ 100] SB Re ference Clock (MHz) [ 100] Sprea d Spectrum [ Disabled] > G.P .U Phase Cont rol > CPU FID/VID Cont rol > Vol tage Configur ation > DRA M Timing Conf iguration > Hyp er Transport Configuratio n > Mem ory Configura tion > EC Configuration GFX E ngine Clock O verride [ Disabled] Integ rated Memory Test [ Disabled]
+F1 F1 0 ES C
S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
43
7 Exit Menu
T his menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items.
Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset T-Series Exit
Exit Options Save Changes a nd Exit Discard Change s and Exit Discard Change s Load Optimal D efaults CMOS Backup Fu nction Security Setti ngs > Security
Exit system setup after saving the changes. F10 key can be used for this operation.
S elect Screen S elect Item EnterG o to Sub Screen F1 G eneral Help F10 S ave and Exit ESC E xit
Discard Changes
Abandon all changes made during the current session and restore the previously saved values.
44
Security
T his sub-menu allows you to provide/revise supervisor and user password.
BIOS SETU P U TILITY Security Setti ngs Supervisor Pas sword :Not Installe d User Password :Not Installe d Change Supervi sor Password User Access Le vel Change User Pa ssword Clear User Pas sword Password Check [Ful l Access] [Set up] S elect Screen S elect Item EnterC hange F1 G eneral Help F10 S ave and Exit ESC E xit Exit Install or Change the password.
45
46