Professional Documents
Culture Documents
TECHNICAL
INFORMATION RAPID
1. Engine 2. Chassis
CK-1 3
3. Electrical 4. Body
No. 2
Jan 22, 2007
THE DOCUMENT IS CLASSIFIED AND KEPT IN DOCUMENT FOR CK-1, MK-1 AND FC-1.
Suppose transmitter lost or damaged, you can buy new transmitter matching with the original remote controller, if remote controller damaged, you can buy new one matching with the original transmitter, and if changing the transmitter and controller at the same time, they must be made by the same supplier for match. (The supplier code can be found in the back of transmitter.)
1. Within 7s (second) turn on and turn off the ignition key 3 times and keep the ignition key on position in the third time.
-1-
2. Observe the anti-theft indicator LED light (red). It will quickly flash 3s and be off 1s. After the LED light on and off again, turn the key to off position, and then switch on. When the horn sounds a hoot, it means that the matching procedure is starting.
3. Press and hold the lock or unlock button of the transmitter over 2s. When the horn sounds a hoot again, this means matching is ended.
-2-
4. When matching for all the transmitters is done, turn the ignition to off position. After 10s the horn sounds another hoot, it means the matching procedure is close.
Note: 1. One remote controller can match maximum four transmitters one time. 2. If more than four transmitters are matched one time, only the last four transmitters will be available. 3. If matching one transmitter, quit the matching mode, and enter the mode again for another matching. If to do so, the first matched transmitter will be failed.
-3-