Professional Documents
Culture Documents
28 May 2007
Previous Issue: 26 March 2007 Next Planned Update: 1 July 2010 Revised paragraphs are indicated in the right margin Primary contact: Awami, Luay Hussain on 966-3-8733799
Page 1 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
Scope This Standard identifies acceptable manufacturers for instrumentation products. This Standard does not apply to purchasing procedures associated with instrument materials for replenishment of SAMS stock.
Conflicts and Deviations 2.1 Any conflicts between this standard and other applicable Saudi Aramco Engineering Standards (SAESs), Materials System Specifications (SAMSSs), Standard Drawings (SASDs), or industry standards, codes, and forms shall be resolved in writing by the Company or Buyer Representative through the Manager, Process & Control Systems Department, Saudi Aramco, Dhahran. Direct all requests to deviate from this standard in writing to the company or buyer representative, who shall forward such requests to the Manager, Process and Control Systems Department of Saudi Aramco, Dhahran.
2.2
References The following is a summary of the Saudi Aramco documents and industrial standards that have been mentioned within this standard: Saudi Aramco References Saudi Aramco Engineering Standards SAES-J-200 SAES-J-400 SAES-J-502 SAES-J-904 Pressure Temperature Analyzer Shelters Foundation Fieldbus (FF) Systems
Saudi Aramco Materials System Specifications 34-SAMSS-117 34-SAMSS-118 34-SAMSS-318 34-SAMSS-511 34-SAMSS-512 34-SAMSS-514 34-SAMSS-515 Turbine Flow Meters Positive Displacement Meters Automatic Tank Gauging Equipment Chromatographs Oxygen Analyzers Combustible Gas and Hydrogen Sulphide Monitors Moisture Analyzers
Page 2 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
34-SAMSS-517 34-SAMSS-611 34-SAMSS-612 34-SAMSS-619 34-SAMSS-623 34-SAMSS-624 34-SAMSS-625 34-SAMSS-634 34-SAMSS-711 34-SAMSS-716 34-SAMSS-717 34-SAMSS-718 34-SAMSS-815 34-SAMSS-820 34-SAMSS-821 34-SAMSS-830 34-SAMSS-831 34-SAMSS-913
Density Meters Safety Relief Valves Conventional and Balanced Types Safety Relief Valves Pilot Operated Types Burner Management Systems for Watertube Boilers Programmable Controller Based ESD Systems Wellhead Control, Monitoring and Shutdown Systems Vibration, Axial Position and Bearing Temperature Monitoring Systems Local ZV Shutdown Cabinets and Smart ZV Systems Control Valves - General Services Pneumatic Actuators On-Off Service Hydraulic Valve Actuators Electric Motor Operated Valve Actuators Annunciators Instrument Control Cabinets - Indoor Instrument Control Cabinets - Outdoor Programmable Logic Controller Instrumentation for Packaged Units Instrumentation and Thermocouple Cable
Saudi Aramco Standard Drawings AB-036019 AC-036413 AB-036414 4 Definitions Terms shown in bold font within this document are defined below: Approval: Written authorization by the Manager, Process & Control Systems Department, Saudi Aramco, Dhahran.
Page 3 of 52
Thermowell Assembly and Detail Orifice Flange Assembly, Raised Face Orifice Flange Assembly, Ring Joint
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
Acceptable: Approval is not required to place a purchase order for the product. After the order has been placed, the supplier of this product must ensure that he complies with all aspects of the purchasing contract (e.g., must meet the Saudi Aramco Materials System Specification). CCC: "Commodity Classification Code". License agreement: A contract between a supplier and an owner of rights to an equipment design, allowing a supplier to either (1) assemble the equipment using all the pieces provided by the design owner or (2) assemble the equipment using a combination of pieces provided by the design owner and pieces manufactured by the licensee to the design owner's detailed drawings/specifications. The contract between the licensor and licensee would (1) require the licensee to follow the licensor manufacturing procedures and be routinely audited by the licensor for compliance and (2) require the equipment to be marketed and labeled using the licensor's brand name. Made: Created from raw materials and/or assembled by the manufacturer. Manufacturer: Can be either (1) the owner of the brand name of the equipment or (2) a licensee that has a license agreement. SAMSS: "Saudi Aramco Materials System Specification". Supplier: The person/company etc. who is responsible to provide the equipment to Saudi Aramco. 5 General 5.1 Procurement of a product made by a manufacturer not listed in Section 6 of this Standard is not allowed without approval. Requests for approval by the Instrumentation Standards Committee Chairman of an alternate manufacturer must be supported by documentation identifying how the alternate manufacturer would better serve Saudi Aramco over the manufacturers listed in this standard.
Commentary Note: If the request to procure from an alternate manufacturer is not approved, the approval authority is under no obligation to present the reasons for the refusal.
5.2
The manufacturer listings within Section 6 shall be interpreted in the following manner: 5.2.1 Manufacturer is listed with the word "None" as a "Limitation": All products from the manufacturer in the given category are acceptable provided they meet the purchase specifications and the applicable
Page 4 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAMSS. This does not include material of construction which must be suitable for the specific application. 5.2.2 Manufacturer is listed with a "Limitation": Only the product that meets the "Limitation" is acceptable. If noted as being manufactured "Under License", only products made under the terms of the license agreement are acceptable. Manufacturer is listed with a specific "Location": Only products made in the specific location(s) or area(s) are acceptable.
5.2.3 5.3
For various engineered systems the following note may be referenced in the list of technically acceptable instruments. This note shall apply only to those categories in which it is referenced.
Commentary Note: It is not practical to list sources of supply for this engineered system. Purchase may be from any qualified source that can comply with the mandatory requirements that are listed in each category in which this note is referenced. Verification of compliance shall be the responsibility of the requisition originator. No IU technical evaluation or approval is required. However, IU will assist in such evaluations when requested to do so.
5.4
For instrumentation purchases from manufacturers that are not listed in this standard, a request for technical evaluation shall be submitted in writing to the General Supervisor, Process Instrumentation Division, P&CSD. The Instrumentation Unit/PID/P&CSD will evaluate the subject instrument product for technical acceptability, and shall inform the requestor in writing of the result. Only after the instrument has been identified as technically acceptable, and the manufacturer's facility approved by Vendor Inspection, can the purchase order be placed. These instrument products may or may not be added to the technically acceptable manufacturer's list.
Technically Acceptable Instruments 100 Flow 111 Flow Transmitters D/P Transmitters See Category 211 - Pressure and Differential Pressure Transmitters
Page 5 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
112
Flow Indicators 112.1 Equipment Description: Flowmeter, Variable Area, Rotameters CCC: 340289 (9COM - 6000002916)
MANUFACTURER VENDOR/ PLANT ID 30000125 30000225 30001714 30003533 30003283 30004188 LOCATION CRAWLEY, GB DUISBURG, DE WARMINSTER, US Gottingen, DE HATFIELD, US WEHR, DE LIMITATIONS None None None None None
KDG INSTRUMENTS LTD./ SOLARTRON MOBREY KROHNE-MESSTECHNIK GMBH & CO KG ABB AUTOMATION ABB Automation Products GmbH BROOKS INSTRUMENTS (Emerson) ROTA YOKOGAWA GMBH & CO KG
112.2
MANUFACTURER Ernst Gage Co. Clark-Reliance-Jacoby-Tarbox Corp . ABB AUTOMATION Tyco Flow Control-Penberthy
112.3
113
Flow Switches 113.1 D/P Switches CCC 340198 (9COM- 6000002830) See Category 213 - Pressure and Differential Pressure Switches
Page 6 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
113.2
115
Orifice Assemblies 115.1 Orifice Plates and Flanges CCC: 340157 (9COM- 6000002792) - Orifice; Assembly: Plate; Flange; Sealing Ring CCC: 340158 (9COM- 6000002793) - Orifice; Plate; ASTM A 182/A 240; Mandatory requirements: For orifice plates - Std. Dwg. AE-036014 For RF orifice flanges - Std. Dwg. AC-036413 For RJ orifice flanges - Std. Dwg. AB-036414
MANUFACTURER VENDOR/ PLANT ID 30001107 30001638 30001182 30000010 30001668 30004207 30001575 30003384 LOCATION Stirling, GB HOUSTON, US SHILDON, GB CREMONA, IT Corpus Christi, US Thetford, GB TULSA, US Cremona, IT LIMITATIONS None None None None None None None
DANIEL EUROPE LTD. Daniel Measurement & Control SOLARTRON ISA TECNOMATIC SPA FMC Technologies/Measurement Solutions Crane Manufacturing Inc EUROMISURE SRL
115.2
Meter Runs; Prefabricated Process Gas Metering CCC: 340143 (9COM- 6000002778) - Meter Runs; Prefabricated Process Gas CCC: 340144 (9COM- 6000002779) - Meter Runs; Prefabricated Process Liquid
Page 7 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
MANUFACTURER ALDERLEY SYSTEMS LTD ALDERLEY FZE DANIEL EUROPE LTD. KROHNE OIL & GAS FMC SOLARTRON ISA ODS BV EUROMISURE SRL
VENDOR/ PLANT ID 30000011 30003016 30001107 30004108 30001668 30001182 30003418 30003384
LOCATION WOTTON UNDER EDGE, GB DUBAI, AE Stirling, GB Dordrecht, NL CORPUS CHRISTI, US SHILDON, GB BARENDRECHT, NL Cremona, IT
LIMITATIONS None None None None None For skids up to 20MMSCF/Day None None
115.3
Equipment Description: Orifice Fittings Retractable, Single and dual Chamber CCC: 340157 (9COM- 6000010784)
MANUFACTURER DANIEL EUROPE LTD. DANIEL MEASUREMENT & CONTORL FMC Energy Systems/Measurement Solutions
116
Equipment Description: Flow Meter: Venturi Tube CCC: 340095 (9COM- 6000007215)
MANUFACTURER VENDOR/ PLANT ID 30001182 30001058 30001107 30001667 30000010 30003384 LOCATION SHILDON, GB STONEHOUSE, GB Stirling, GB Erie, US Cremona, IT Cremona, IT LIMITATIONS None None None None None None
SOLARTRON ISA ABB INSTRUMENTATION LTD. DANIEL EUROPE LTD. FMC Energy Systems/Measurement Solutions Tecnomatic SPA EUROMISURE SRL
Page 8 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
117
Equipment Description: Flowmeter; Turbine; In-Line for Process Metering CCC: 340140 (9COM- 6000002775) Specification: 34-SAMSS-117; IR342900
MANUFACTURER VENDOR/ PLANT ID 30001183 30001638 30003189 30001667 30004446 LOCATION BOGNOR REGIS, GB HOUSTON, US CHIHUAHUA, MX Erie, US Scottsdale, US LIMITATIONS None None None None None
BARTON INSTRUMENT SYSTEMS LTD. DANIEL MEASUREMENT & CONTORL DANIEL MEASUREMENT AND CONTROL FMC Energy Systems/Measurement Solutions COX INSTRUMENT
118
Flowmeter; Positive Displacement for Process Metering; Bi-Rot CCC: 340082 (9COM- 6000002722) Specification: 34-SAMSS-118; IR343000
MANUFACTURER VENDOR/ PLANT ID 30001082 30001183 30002198 30001667 30003456 LOCATION MANNHEIM, DE BOGNOR REGIS, GB Milwaukee, US Erie, US Statesboro, US LIMITATIONS None None None None None
BOPP AND REUTHER MESSTECHNIK BARTON INSTRUMENT SYSTEMS LTD. Badger Meter, Inc FMC Energy Systems/Measurement Solutions BRODIE METER CO., LLC
120
30003384
Page 9 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
121
Emerson Process Management Flow BV /BROOKS ABB INSTRUMENTATION LTD. BOPP AND REUTHER MESSTECHNIK Foxboro Company Yokogawa Electric Corporation Emerson-Rosemount Division Krohne
122
Ultrasonic Flowmeters 122.1 Flow Meter: Ultrasonic; Liquid, Gas and Flare Line Service CCC: 340099 (9COM- 6000002738)
MANUFACTURER VENDOR/ PLANT ID 30000225 30004108 30001228 30001865 30003346 30000149 30001638 30003916 LOCATION Duisberg, DE Dordrecht, NL Shannon, IE Waltham, US Bergen, NO Essen, BE Houston, US
Ottendorf-Okrilla, DE
LIMITATIONS Liquid and Gas Liq, Gas and Flare Flare only Gas Only Gas only Gas Only.
Krohne GE Panametrics Roxar Flow Measurement (prev. Fluenta) ELSTER-INSTROMET NV Emerson-Daniel Division Sick-Engineering GmbH
122.2
Flowmeter; Multipath Ultrasonic for Process Metering; Gas Service CCC: 340142 (9COM- 6000002777)
Page 10 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
123
ABB INSTRUMENTATION LTD. ABB AUTOMATION ABB Automation Products GmbH Foxboro Company Yokogawa Electric Corporation Emerson-Rosemount Division Emerson Process Management Flow BV /BROOKS
124
126
127
Crane Manufacturing, Inc Emerson-Daniel Division Fluidic Techniques/FTI Industries EUROMISURE SRL
Page 11 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
128
Emerson/MICRO MOTION INC. Foxboro Company FMC Energy Systems/Measurement Solutions Endress + Hauser FLOWTEC AG ROTA YOKOGAWA GMBH & CO KG
129
Specialty Flowmeters 129.1 Flowmeter; V-Cone Type CCC: 340103 (9COM- 6000002742)
MANUFACTURER VENDOR/ PLANT ID 30001590 LOCATION HEMET, US LIMITATIONS None
McCrometer
200
Pressure 211 Pressure and Differential Pressure Transmitters CCC 340219 (9COM- 6000002850) - Transmitter: Flow CCC 340220 (9COM- 6000002851) - Transmitter: Pressure
MANUFACTURER Emerson- Rosemount Division Rosemount Inc Foxboro Company Honeywell, Inc. ABB instrumentation SPA ABB Automation Products Yokogawa Electric SMAR 10021582 VENDOR/ PLANT ID LOCATION All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted Houston, US LIMITATIONS None None None None None None None
Page 12 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
212
Pressure Gauges CCC 340116 (9COM- 6000002754) - Indicator: Pressure Specification: Mandatory requirements are specified in SAES-J-200.
MANUFACTURER VENDOR/ PLANT ID 10016194 LOCATION Feasterville, PA US All Locations Accepted Jubail All Locations Accepted 10017797 Michigan City, US LIMITATIONS None None None None None
Ametek, Inc. (U.S. Gauge PMT) WIKA Middle East WIKA GMBH Dresser Al-Rushaid Valve & Instrument/ Ashcroft Dresser Instrument Division, Ashcroft Dwyer Instruments, Inc. (Magnehelic)
30000428
213
Pressure and Differential Pressure Switches CCC 340198 (9COM- 6000002830) - Switch: Differential Pressure CCC 340202 (9COM- 6000002834) - Switch: Pressure
MANUFACTURER VENDOR/ PLANT ID LOCATION All Locations Accepted Bognor Regis, UK SWINDON, UK Jubail, KSA Michigan City, US SW, UK Lenexa, KS, US Watertown, MA, US LIMITATIONS None None None None None None None None
WIKA Middle East WIKA GMBH Barton Instrument Systems Custom Control Sensors, Inc Dresser Industries, Ashcroft Instrument Div Mercoid Corp SOR Europe SOR, Inc United Electric Controls
214
Emerson- Rosemount Division Honeywell, Inc. ABB Automation Products GMBH Ltd Yokogawa Electric
Page 13 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
215
Ametek, Inc. (U.S. Gauge PMT) Barton Instrument Systems Dresser Al-Rushaid Valve & Instrument/ Ashcroft DRESSER (INSTRUMENT DIV) WIKA 30001183 30000428
217
Differential Pressure Gauges 9COM- 6000002749 (CCC 340111) - Indicator: Differential Pressure
MANUFACTURER VENDOR/ PLANT ID LOCATION All Locations Accepted 30001183 30000428 10017797 10021406 BOGNOR REGIS Jubail All Locations Accepted Michigan City, US All Locations Accepted Cleveland, OH, US All Locations Accepted LIMITATIONS None None None None None None None None
ABB instrumentation Ltd ABB Automation Barton Instrument Systems Dresser Al-Rushaid Valve & Instrument/ Ashcroft DRESSER (INSTRUMENT DIV) Dwyer Instruments, Inc Honeywell, Inc. Meriam Instruments Div WIKA
300
Level 311 D/P Level Transmitters See Category 211 - Pressure and Differential Pressure Transmitters 312 Level Gauge Glasses CCC 340255 (9COM- 6000002886) - Glass: Level Gauge
MANUFACTURER Simco Engineers Ltd Clark-Reliance-Jerguson Gage and Valve Co Penberthy/Tyco Flow Control Cesare Bonetti Spa K-Tek Corp VENDOR/ PLANT ID 10001569 30002559 30002066 30003728 30003005 LOCATION Jarrow, UK Strongsville, OH, US PROPHETSTOWN, US Milano, It Prairieville, LA, US LIMITATIONS None None None None None
Page 14 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
313
Level Switches - Float and Displacer Type CCC 340200 (9COM- 6000002832) - Switch: Liquid Level
MANUFACTURER VENDOR/ PLANT ID 30003005 30001819 30003796 30000124 10021774 LOCATION Prairieville, LA, US Downers Grove, US Zele, BE SLOUGH, GB Lenexa, KS, US LIMITATIONS None None None None
K-Tek Corp Magnetrol International INC. Magnetrol International NV SOLARTRON MOBREY LTD SOR, Inc
314
Transmitter; Liquid Level; Displacer CCC 340125 (9COM- 6000002763) Level Instrument Displacer Type: (Transmitters/Controllers; NA)
MANUFACTURER VENDOR/ PLANT ID 30000124 30001611 30001819 30003796 30002059 30001650 30003023 30003024 30001203 30000428 LOCATION SLOUGH, GB AVON, US Downers Grove, US Zele, BE FOXBORO, US Marshalltown, US CERNAY, FR BUDAPEST, HU CONDESURNOIREAU, FR Jubail, KSA LIMITATIONS None None None None None None None None None
SOLARTRON MOBREY LTD MASONEILAN DIVISION MAGNETROL INTERNATIONAL MAGNETROL INTERNATIONAL NV FOXBORO COMPANY FISHER Controls Inc FISHER ROSEMOUNT S.A. FISHER ROSEMOUNT LTD DRESSER PRODUCTS INDUSTRIELS Dresser Industries
315
Ametek DREXELBROOK Magnetrol International INC. Magnetrol International NV ENDRESS & HAUSER INC. ENDRESS AND HAUSER SOLARTRON MOBREY LTD
Page 15 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
316
Level Instruments Capacitance or RF Addmittance CCC 340123 (9COM- 6000002761) - Level Control: Capacitance Type
MANUFACTURER VENDOR/ PLANT ID 30001485 30001819 30003796 30001859 30003797 LOCATION HORSHAM,US Downers Grove, US Zele, BE GREENWOOD, US Maulburg, Germany LIMITATIONS None None None None
Ametek DREXELBROOK Magnetrol International INC. Magnetrol International NV ENDRESS & HAUSER INC. ENDRESS AND HAUSER
317
Level Instruments - Nuclear Radiation 9COM- 6000002764 (CCC 340126) - Level Instrument: Radiation Type
MANUFACTURER VENDOR/ PLANT ID 30001630 30001852 30001859 30003797 LOCATION Round Rock, TX, US Cincinnati, Ohio, US GREENWOOD, US Maulburg, Germany LIMITATIONS None None None None
Thermo Electron Corp (Texas Nuclear) Ohmart/Vega Corp ENDRESS & HAUSER INC. ENDRESS AND HAUSER
318
Tank Gauging Equipment Servo and Float CCC: 340206 (9COM- 6000002838) Specification: 34-SAMSS-318
MANUFACTURER VENDOR/ PLANT ID 30001134 30001679 10024848 LOCATION DELFT, NL HILLSIDE, US Norcross, US LIMITATIONS None None None
Page 16 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
319
Tank Gauging Equipment Radar (for inventory tank use only) CCC: 340190 (9COM- 6000002822) Specification: 34-SAMSS-319
MANUFACTURER VENDOR/ PLANT ID 30001134 30001253 30003797 LOCATION DELFT, NL GOTEBORG, SE Maulburg, Germany LIMITATIONS None None ON HOLD
ENRAF TERMINAL AUTOMATION SAAB ROSEMOUNT TANK RADAR AB ENDRESS AND HAUSER
320
Guided Wave Radar (GWR) Level Transmitters 9COM- 6000007390 (CCC 340132) - Transmitter: Level; GWR
MANUFACTURER VENDOR/ PLANT ID 30001819 30003796 30001253 30003005 30003797 LOCATION DOWNERS GROVE, US ZELE, BE GOTEBORG, SE Prairieville, LA, US Maulburg, Germany LIMITATIONS None None None None None
MAGNETROL INTERNATIONAL INC. MAGNETROL INTERNATIONAL NV SAAB ROSEMOUNT TANK RADAR AB K-Tek ENDRESS AND HAUSER
321
Level Gauge- Magnetic Type (MLI) CCC: 340127 (9COM- 6000002765) Gauge; Level; Magnetic
MANUFACTURER VENDOR/ PLANT ID 30003005 30003728 30001819 30003796 LOCATION Prairieville, US Milano, IT DOWNERS GROVE, US ZELE, BE LIMITATIONS None None None None
K-tek Corp Cesare Bonetti SPA MAGNETROL INTERNATIONAL INC. MAGNETROL INTERNATIONAL NV
Page 17 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
400
Temperature 411 Temperature Transmitters CCC 340221 (9COM- 6000002852) - Transmitter: Temperature
MANUFACTURER Emerson- Rosemount Division Foxboro Company Honeywell, Inc. ABB instrumentation SPA ABB Automation Yokogawa Electric SMAR WIKA 10021582 VENDOR/ PLANT ID LOCATION All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted Houston, US All Locations Accepted LIMITATIONS None None None None None None None
412
Temperature Indicators CCC 340118 (9COM- 6000002756) - Indicator: Temperature- Bimetallic and Expansion Types Specification: Mandatory requirements are specified in SAES-J-400.
MANUFACTURER VENDOR/ PLANT ID 10016196 LOCATION 820 Pennsylvania Blvd. Feasterville, PA 19053 All Locations Accepted Jubail All Locations Accepted All Locations Accepted Crissier, CH LIMITATIONS None None None None None None
Ametek, Inc. (U.S. Gauge PMT) ABB instrumentation Ltd ABB Automation Dresser Al-Rushaid Valve & Instrument/ Ashcroft DRESSER (INSTRUMENT DIV) WIKA RUEGER SA
30000428
30001251
Page 18 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
413
Custom Control Sensors, Inc Mercoid Corp Barton Instrument Systems SOR, Inc United Electric Controls Dresser Industries, Ashcroft Instrument Div WIKA Middle East WIKA GMBH
415
Thermocouples CCC 340258 (9COM- 6000002888) Thermocouple Specification: Mandatory requirements are specified in SAES-J-400.
MANUFACTURER VENDOR/ PLANT ID 10020168 30001963 30001296 10031229 10022325 10021385 10001266 30001251 LOCATION All Locations Accepted Minneapolis, US Saddle Brook, US WADDINXVEEN, NL Pasadena, TX, US Watertown, MA, US Buffalo, US Chuo-Ku All Locations Accepted Crissier, CH LIMITATIONS None None None None None None None None None None
Honeywell, Inc Minco Products, Inc Thermo Electric Co, Inc Doedijns Thermo Electric BV Gay Engineering and Sales Co. (GAYESCO) United Electric Controls Conax Buffalo Technologies Okazaki Manufacturing Co WIKA RUEGER SA
Page 19 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
416
Resistance Temperature Detectors CCC: 340181 (9COM- 6000002814) Specification: Mandatory requirements are specified in SAES-J-400
MANUFACTURER VENDOR/ PLANT ID 30001111 30001830 30001920 30001963 30001296 30002010 30001251 LOCATION ALZENAU, DE MINNEAPOLIS, US BUFFALO,US SADDLE BROOK, US WADDINXVEEN, NL Richmond, US All Locations Accepted Crissier, CH LIMITATIONS None None None None None None None None
ABB AUTOMATION PRODUCTS GMBH MINCO PRODUCTS INC. CONAX BUFFALO CORPORATION THERMO ELECTRIC Co., Inc Doedijns THERMO ELECTRIC BV Watlow Gordon WIKA INSTRUMENTS LIMITED RUEGER SA
417
418
Thermowell CCC: 340214 (9COM- 6000002845) Specification: Mandatory requirements are specified in SAES-J-400
MANUFACTURER VENDOR/ PLANT ID 30000428 30001098 30001111 30001119 30002388 30001296 30001830 30001422 30004141 30003986 LOCATION JUBAIL,SA CHEADLE HULME, CHEADLE, GB ALZENAU,DE BAESWEILER, DE WINFIELD, US Waddinxveen, NL MINNEAPOLIS, US Chuo-Ku Edmonton, CA DE LIMITATIONS None None None None None None None None None
Dresser al-rushaid valve and instrument Abb instrumentation Ltd. Abb automation products gmbh Dresser europe gmbh (instrument Thermo-couple products company Doedijns Thermo electric BV Minco products inc. Okazaki Manufacturing Co WIKA INSTRUMENTS LIMITED
Page 20 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
500
Analytical 511 Analyzer; Chromatograph; Process Gas or Liquid CCC: 340287 (9COM- 6000002914) Specification: 34-SAMSS-511; IR343200
MANUFACTURER ABB AUTOMATION Siemens APPLIED AUTOMATION Yokogawa Electric Corp Hamilton Sundstarnd VENDOR/ PLANT ID 30001706 30001930 30001465 10024160 LOCATION LEWISBURG, US BARTLESVILLE, US Japan Pamona, CA, US LIMITATIONS None None None None
512
ABB INSTRUMENTATION LTD. GE/PANAMETRICS LTD SERVOMEX UK LTD. Yokogawa Electric Corp. YOKOGAWA ELECTRIC KOFU PLANT AMETEK PROCESS INSTRUMENTS TELEDYNE INSTRUMENTS Sick-Maihak AG Emerson Process ManagementFisher Rosemount GmbH & Co., Siemens Applied Automation Rosemount Analytical Inc
Page 21 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
513
ABB INSTRUMENTATION LTD. Foxboro Co. GLI International YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT Horiba Instruments Emerson - Rosemount Analytical Division
514
Hydrogen Sulfide Monitors; Gas CCC: 340151 (9COM- 6000002786) Specification: 34-SAMSS-514; IR344900
MANUFACTURER VENDOR/ PLANT ID 30001597 30001693 30002064 LOCATION MINNEAPOLIS, US LAKE FOREST, US THE WOODLANDS, US LIMITATIONS On-HOLD None On-HOLD
515
ALPHA MOISTURE SYSTEMS PANAMETRICS LIMITED PANAMETRICS SHAW MOISTURE METERS (UK) LTD. AMETEK PROCESS INSTRUMENTS AMETEK CANADA INC Servomex
Page 22 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
516
ABB AUTOMATION E.C. ABB PASTECH Emerson Process Management GmbH Siemens Applied Automation Computer System Protection (Al-Mannai) YOKOGAWA ELECTRIC ASIA (YAS)
517
Density Meter; Gas and Liquid CCC: 340080 (9COM- 6000002720) Specification: 34-SAMSS-517; IR345300
MANUFACTURER VENDOR/ PLANT ID 30001630 30000125 30001465 30003284 LOCATION Round Rock, TX, US CRAWLEY, GB MUSASHINO-SHI, JP KOFU, JP LIMITATIONS None None None None
Thermo Electron Corp KDG INSTRUMENTS LTD / SOLARTRON MOBREY YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT
518
Page 23 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
520
BS&W Analyzers 9COM- 6000002655 (CCC 340008) - Analyzer: Bottom Sediment and Water
MANUFACTURER VENDOR/ PLANT ID 30001630 10018327 30001727 30002049 30003347 LOCATION Round Rock, TX, US Stephenville, US US Houston, US STAVANGER, NO LIMITATIONS None None None None None
Thermo Electron Corp FMC Fluid Control/Invalco Halliburton Energy Services. Agar Corp ROXAR Flow Measurement AS
521
Chlorine Analyzers and Chlorinators 9COM- 6000002658 (CCC 340011) - Analyzer: Chlorine
MANUFACTURER VENDOR/ PLANT ID 30001058 30001646 30001465 30003284 LOCATION STONEHOUSE, GB Irvine, US MUSASHINO-SHI, JP KOFU, JP LIMITATIONS None None None None
ABB INSTRUMENTATION LTD. Emerson - Rosemount Analytical Division YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT
522
Combustible Gas Monitors CCC: 340147 (9COM- 6000002782) - Monitor; Gas; Combustible CCC: 340152 (9COM- 6000002787) - Monitor; Gas; Combustible; Open Path Type Specification: 34-SAMSS-514; IR344900
MANUFACTURER VENDOR/ PLANT ID 30001597 30001693 30003264 30002064 LOCATION MINNEAPOLIS, US LAKE FOREST, US Galway, IE THE WOODLANDS, US LIMITATIONS ON-HOLD None none None
DETECTOR ELECTRONICS CORPORATED GENERAL MONITORS INC GENERAL MONITORS IRELAND DETCON INCORPORATED
Page 24 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
523
ABB INSTRUMENTATION LTD. Emerson - Rosemount Analytical Division Horiba YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT
524
Continuous Emission Monitoring Analyzers 9COM- 6000002663 (CCC 340017) - Analyzer: Furnace/Flue Gas
MANUFACTURER VENDOR/ PLANT ID 10026423 30001481 30001293 30003917 30003284 LOCATION Telford, GB PITTSBURGH, US CROWBOROUGH, GB Reute, DE Kufo, JP LIMITATIONS None None None None
525
Page 25 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
530
600
Safety 605 Surge Relief Valves CCC: 340267 (9COM- 6000002896) - Valve; Relief; Surge Relief Station 605.1 Gas Loaded Surge Relief Valves
VENDOR/ PLANT ID 30001637 LOCATION HOUSTON, US LIMITATIONS None
605.2
MANUFACTURER SPX- M&J VALVE OPERATIONS MOKVELD B.V. CONTROL COMPONENTS INCORPORATED (CCI)
Page 26 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
611
Safety Relief Valves; Flanged, Conventional and Balanced Bellows CCC: 340238 (9COM- 6000002869) Specification: 34-SAMSS-611; IR341900
MANUFACTURER VENDOR/ PLANT ID 30000428 30001610 30001299 30001812 30003350 30003351 30003922 30000217 LOCATION JUBAIL, SA ALEXANDRIA, US STOCKPORT, GB STAFFORD, US Brecksville, US Brantford, CA Hohewestedt, DE Worsley, UK LIMITATIONS None None None None None None None None
DRESSER AL-RUSHAID VALVE AND DRESSER INDUSTRIAL VALVE ANDERSON GREENWOOD CROSBY ANDERSON GREENWOOD CROSBY FARRIS ENGINEERING FARRIS ENGINEERING LESER GMBH & CO KG Tyco Safety Systems UK
612
Safety Relief Valves; Pilot Operated CCC: 340237 (9COM- 6000002868) Specification: 34-SAMSS-612; IR342000 612.1 For Processing Plants
VENDOR/ PLANT ID 30000428 30001610 30001812 30003350 30000217 LOCATION JUBAIL, SA ALEXANDRIA, US STAFFORD, US Brecksville, US Worsley, UK LIMITATIONS None None None None None
MANUFACTURER DRESSER AL-RUSHAID VALVE AND DRESSER INDUSTRIAL VALVE ANDERSON GREENWOOD CROSBY FARRIS ENGINEERING Tyco Safety Systems UK
612.2
MANUFACTURER Tyco Whessoe Tyco Varec ANDERSON GREENWOOD CROSBY Groth Corporation
Page 27 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
613
L & J TECHNOLOGIES ANDERSON GREENWOOD CROSBY Tyco Whessoe (UK Factory) Tyco Varec (USA Factory) Groth Corporation
614
615
616
Check Valve (Gauge Glasses) 9COM- 6000002680 (CCC 340035)- Valve: Backflow Preventer 9COM- 6000002854 (CCC 340223) - Valve: Check; Level Gauge Glass; Flow Shut-Off
MANUFACTURER VENDOR/ PLANT ID 10019404 30002066 10001569 10003565 LOCATION Strongsville, US PROPHETSTOWN, US Jarrow, UK Garbagnate, IT LIMITATIONS None None None None
Clark-Reliance-Jerguson Gage and Valve Co Tyco Flow Control-Penberthy Incorporated Simco Engineers Cesare Bonetti
Page 28 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
617
Flame Monitoring Systems CCC: 340092 (9COM- 6000002732); IR 345600 Specification: 34-SAMSS-619
MANUFACTURER VENDOR/ PLANT ID 30001164 30001252 30001599 30001671 30001743 LOCATION POOLE, GB PERO, IT DERRY, US CARROLLTON, US Phoenix, AZ, US LIMITATIONS None None None None None
HAMWORTHY COMBUSTION ENGINEERING ABB INSTRUMENTATION FIREYE ELECTRONICS FORNEY INTERNATIONAL Honeywell, Inc
619
Burner Management Systems for Watertube Boilers CCC: 340083 (9COM- 6000002723) - Emergency Shutdown System; Programmable Logic Controller
MANUFACTURER VENDOR/ PLANT ID 30001186 30001898 LOCATION MALDON, GB HOUSTON, US LIMITATIONS Trusted R3.4 Trusted R3.4 Tricon V10 or Trident V1.3 Tricon V10 or Trident V1.3
30003780 30003562
624
Speed Sensors (RPM) 9COM- 6000002820 (CCC 340187) - Sensor: Speed Specification: 34-SAMSS-625
MANUFACTURER VENDOR/ PLANT ID 10001845 30001527 30001915 30001908 10000845 LOCATION Rockford, IL, US MINDEN, US SAN DIEGO, US Milwaukee, Wisconsin, US Saltney Ferry, UK LIMITATIONS None None None None None
Woodward Governor BENTLY-NEVADA CORPORATION SKF CONDITION MONITORING, Rockwell Automaiton-Entek (IRD) IRD UK LTD
Page 29 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
625
Vibration Monitors; Non-Contacting Type CCC: 340162 (9COM- 6000002796) Specification: 34-SAMSS-625; IR345100
MANUFACTURER VENDOR/ PLANT ID 30001096 30001527 30001915 30001908 LOCATION NAERUM, DK MINDEN, US SAN DIEGO, US Milwaukee, Wisconsin, US LIMITATIONS None None None None
BRUEL & KJAER VIBRO A/S BENTLY-NEVADA CORPORATION SKF CONDITION MONITORING, Rockwell Automaiton-Entek (IRD)
626
Ametek-ROCHESTER INSTRUMENT SYSTEMS LTD Ametek-ROCHESTER INSTRUMENT SYSTEMS LTD BENTLY-NEVADA CORPORATION/GE Power Rockwell Automaiton-Entek (IRD) SKF CONDITION MONITORING/Vibro-Meter, Vibro-Meter S.A.
627
Page 30 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
628
Shut Down Cabinets - Local, Electro-pneumatic 628.1 CCC: 340039 (9COM- 6000002684) - Cabinet: Shutdown, Local, Pneumatic and Electric without Partial Stroke Test Feature Specification: 34-SAMSS-634
MANUFACTURER VENDOR/ PLANT ID 30001126 30003021 30001080 30001841 LOCATION HENGELO, NL ST LEONARDS -ONSEA, GB Fiorenzuola D'Arda, IT HARVEY,US LIMITATIONS None None None None
ELECTROMACH B.V. DRALLIM INDUSTRIES LTD Biffi Italia SRL TOTAL ENGINEERING SERVICES
628.2
CCC: 340242 (9COM- 6000002873) Cabinet: Shutdown, Local, Pneumatic and Electric with Partial Stroke Test Feature Specification: 34-SAMSS-634
628.3
Smart ZV Controller (9COM- 6000010782)- Smart Valve Controller and Software that provide the local control of Smart ZV with predefined Partial Stroke Test Feature and local test pushbutton Specification: 34-SAMSS-634
Page 31 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
628.4
Smart ZV Assembly (9COM- 6000002889) - Valve; 34-SAMSS-634, Valve Emergency Shutdown, Smart ZV Valve/Actuator Assembly with Local Control Panel and Digital Positioner Specification: 34-SAMSS-634
629
630
631
Bearing Temperature Monitors 9COM- 6000002780 (CCC 340145) - Monitor: Temperature; 34-SAMSS-625 See category 626 for approved temperature monitor vendors.
632
Vibration Monitors - Seismic Type 9COM- 6000002875 (CCC 340244) - Vibration Monitoring System: Seismic Specification: 34-SAMSS-625
MANUFACTURER VENDOR/ PLANT ID 30001527 30001915 30001911 LOCATION MINDEN, US SAN DIEGO, US Houston, TX , US LIMITATIONS None None None
Page 32 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
635
Wellhead Shut Down Systems 635.1 9COM- 6000003611 (CCC: 450200)- Wellhead Emergency Shutdown System for Multi-well Offshore Applications Specification: 34-SAMSS-624
MANUFACTURER VENDOR/ PLANT ID 30001629 30003312 30001063 30001727 30003634 30003016 30003523 LOCATION Kingwood, US Dubai, AE UK Carrollton, US Jurong Town, SG Dubai, AE Dubai, AE LIMITATIONS None None None None None None None
e Production Solutions e Production Solutions CAC LTD (eProduction) Halliburton Energy Services Controls & Electrics PTE LTD ALDERLEY FZE PROSERV ME
635.2
9COM- 6000003727 (CCC: 451545)- PANEL: HYDRAULIC; SSV/ SSSV; Single-Well Onshore Applications Specification: 34-SAMSS-624
MANUFACTURER Cooper Cameron e Production Solutions Halliburton Energy Svcs Baker Oil Tools Cameron Willis Wood Group Pressure Control (Barber Industries) Controls & Electrics PTE LTD ALDERLEY FZE PROSERV ME
VENDOR/ PLANT ID 30000051 30003312 30001727 30001524 30003622 30002704 30003634 30003016 30003523
LOCATION UK Dubai, AE US Broken Arrow, US Houston, US Edmonton, CA Jurong Town, SG Dubai, AE Dubai, AE
LIMITATIONS None None None None None None None None None
635.3
9COM- 6000003729 (CCC: 451546)- ACTUATOR: Surface Safety Valve; Hyd; Self Contained Actuator Specification: 34-SAMSS-624
MANUFACTURER Cooper Cameron Singapore Cameron France Baker Oil Tools Wood Group Pressure Control (Barber Industries) Stream Flo
Page 33 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
700
Valves 711 Control Valves; Globe CCC: 340230 (9COM- 6000002861) - Valve: Control; Globe; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100
MANUFACTURER SEVERN GLOCON LTD. VENDOR/ PLANT ID 30001266 LOCATION GLOUCESTER,GB LIMITATIONS Digital positioner to be supplied from other approved vendors None None None None None None None
FISHER NIPPON CO. LTD. FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. FLOWSERVE CORPORATION FLOWSERVE CORP FLOWSERVE SCHMIDT ARMATUREN MASONEILAN DIVISION NIIGATA MASONEILAN CO LTD DRESSER AL-RUSHAID Valves (Masoneilan) DRESSER PRODUCTS INDUSTRIES DRESSER ITALIA SPA
30001402 30001650 30001652 30002081 30003833 30003023 30001513 30001265 30003943 30001611 30001391 30000428 30001203 30003077
CHIBA,,JP Marshalltown, US SHERMAN, US SZEKESFEHERVAR, HU NILAI, MY CERNAY, FR SPRINGVILLE, US Haywards Heath, GB VILLACH, AT AVON,US KARIWA-GUN, JP JUBAIL, SA CONDE-SURNOIREAU, FR CASAVATORE, IT
Page 34 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
712
Control Valves - Ball and Eccentric Plug (Characterized) CCC: 340227 (9COM- 6000002858) - Valve: Control; Ball; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100
MANUFACTURER VENDOR/ PLANT ID 30001513 30001652 30001650 30002081 30003833 30003023 30001402 30003028 30001611 30000428 30001203 LOCATION SPRINGVILLE, US SHERMAN, US Marshalltown, US SZEKESFEHERVAR, HU NILAI, MY CERNAY, FR CHIBA,, JP HELSINKI, FI AVON, US JUBAIL, SA CONDE-SURNOIREAU, FR LIMITATIONS None None None None None None None None None None
FLOWSERVE CORPORATION FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. NIPPON FISHER CO. LTD. METSO AUTOMATION OY MASONEILAN DIVISION DRESSER AL-RUSHAID VALVES (Masoneilan) DRESSER PRODUCTS INDUSTRIES
713
Control Valves - Butterfly and Rotary Plug CCC: 340228 (9COM- 6000002859 ) - Valve: Control; Butterfly; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100
MANUFACTURER VENDOR/ PLANT ID 30001402 30001650 30001652 30002081 30003833 30003023 30001265 30001513 30001611 30000428 30003028 LOCATION CHIBA, JP Marshalltown, US SHERMAN, US Szekesfehervar, HU NILAI, MY CERNAY, FR Haywards Heath, GB SPRINGVILLE, US AVON, US JUBAIL, SA HELSINKI, FI LIMITATIONS None None None None None None None None None None None
NIPPON FISHER CO. LTD. FISHER CONTROLS Inc FISHER CONTROLS INCORPORATED Fisher Rosemount Hungary Ltd EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. FLOWSERVE CORP. FLOWSERVE CORPORATION MASONEILAN DIVISION DRESSER AL-RUSHAID VALVES (Masoneilan) METSO AUTOMATION OY
Page 35 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
714
Control Valves - Severe and Non-General Service CCC: 340261 (9COM- 6000002891) - Valve: Control; Non-General Service including actuator, positioner and accessories Specification: 34-SAMSS-711
MANUFACTURER VENDOR/ PLANT ID 30001266 LOCATION GLOUCESTER,GB LIMITATIONS Digital positioner to be supplied from other approved vendors None
FLOWSERVE CORP FLOWSERVE SCHMIDT ARMATUREN FLOWSERVE CORPORATION MASONEILAN DIVISION NIIGATA MASONEILAN CO LTD FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. NIPPON FISHER CO. LTD. CONTROL COMPONENTS INCORPORATED MACHINEFABRIEK MOKVELD B.V.
30001265 30003943 30001513 30001611 30001391 30001650 30002081 30003833 30003023 30001402 30001921 30001213
Haywards Heath, GB VILLACH, AT SPRINGVILLE, US AVON, US KARIWA-GUN, JP MARSHALLTOWN, US SZEKESFEHERVAR, HU NILAI, MY CERNAY,FR CHIBA, JP RANCHO SANTA MARGARITA, US GOUDA, NL
None None None None None None None None None Digital positioner to be supplied from other approved vendors None None
30000428 30001203
JUBAIL, SA CONDE-SURNOIREAU, FR
Page 36 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
715
Control Valves; Angle CCC: 340224 (9COM- 6000002855) - Valve: Control; Globe Angel; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100
MANUFACTURER VENDOR/ PLANT ID 30001266 LOCATION GLOUCESTER,GB LIMITATIONS Digital positioner to be supplied from other approved vendors None None None None None None None
FISHER NIPPON CO. LTD. FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. FLOWSERVE CORPORATION FLOWSERVE CORP FLOWSERVE SCHMIDT ARMATUREN MASONEILAN DIVISION NIIGATA MASONEILAN CO LTD DRESSER AL-RUSHAID Valves (Masoneilan) DRESSER PRODUCTS INDUSTRIES DRESSER ITALIA SPA
30001402 30001650 30002081 30003833 30003023 30001513 30001265 30003943 30001611 30001391 30000428 30001203 30003077
CHIBA,,JP Marshalltown, US SZEKESFEHERVAR, HU NILAI, MY CERNAY, FR SPRINGVILLE, US Haywards Heath, GB VILLACH, AT AVON,US KARIWA-GUN, JP JUBAIL, SA CONDE-SURNOIREAU, FR CASAVATORE, IT
716
Valve Actuators; Pneumatic; On-Off CCC: 340271 (9COM- 6000002899) - Actuator: For Operating On/Off Valve; Air/Nitrogen Powered; Diaphragm Operated CCC: 340275 (9COM- 6000002903) - Actuator: For Operating Valve; Pneumatic Piston
Page 37 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
717
Valve Actuators; Hydraulic and Electro/Hydraulic CCC: 340274 (9COM- 6000002902) Specification: 34-SAMSS-717 to purly hydraulic only
MANUFACTURER VENDOR/ PLANT ID 30000231 30001080 30001531 30001532 30003605 30000067 30001913 30003793 30003163 LOCATION Voghera, IT Fiorenzuola d'arda, IT Waller, US Edmonton, CA VILLEMOMBLE, FR Coselli, IT Rochester, US W. Bridgewater, MA, US Rivanazzano, IT LIMITATIONS None On/off only On/off only On/off only None On/off only On/off only Throttling & on/off None
Dresser italia spa Biffi spa Bettis actuators and controls Bettis canada ltd EPM BETTIS FRANCE Rotork fluid systems srl Rotork controls, incorporated REXA/Koso America VALVITALIA SPA
718
Valve Actuators Electric 718.1 Electrical Actuators for Control Applications 9COM- 6000002901 (CCC 340273) - Actuator: For Operating Valve; Electric Motor
Page 38 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
718.2
Electrical Actuators for ESD/Wellhead Applications 9COM- 6000010821- Actuator: For Operating Valve; Electric Motor, Fail Safe Design Specification: 34-SAMSS-718
MANUFACTURER BIFFI SPA (EFS) ROTORK CONTROLS, INCORPORATED (EH) Cameron Halliburton (LEO)
719
Regulators - Pressure and Flow 9COM- 6000002810 (CCC 340177) - Regulator: Pressure; Flow
MANUFACTURER VENDOR/ PLANT ID 30001611 30000428 30003758 LOCATION AVON, US Jubail, SA McKINNEY, US LIMITATIONS None None None
720
Page 39 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
721
Control Valves: Axial Flow CCC: 340233 (9COM- 6000002864) - Valve: Control; Axial Flow (Straight Thru); Including Actuator, positioner and Regulator Specification: 34-SAMSS-711
MANUFACTURER VENDOR/ PLANT ID 30001637 30001213 30000428 LOCATION HOUSTON, US GOUDA, NL Jubail, SA LIMITATIONS None None None
722
SCHROEDAHL ARAPP GMBH & CO. KG H. SCHROEDER & CO. GMBH & CO. KG Tyco Valves & Control-Yarway
723
Control Valves; Desuperheating CCC: 340229 (9COM- 6000002860) Valve: Control; Desuperheating; including Actuator, Regulator, Positioner Specification: 34-SAMSS-711
MANUFACTURER VENDOR/ PLANT ID 30001650 30001611 30000428 LOCATION Marshalltown, US Avon, US Jubail LIMITATIONS None None None
Page 40 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
800
Panel Instrumentation 811 Controllers and Indicators Analog 9COM- 6000002700 (CCC 340060) - Controller/Indicator: For Panel Mounting
MANUFACTURER Foxboro Co. ABB Automation Honeywell, Inc Yokogawa Electric Corp VENDOR/ PLANT ID 30002059 10003364 30001743 30001465 LOCATION Foxboro, US ST NEOTS, GB Phoenix, AZ, US Japan LIMITATIONS None None None None
812
Foxboro Co. ABB Barton Instrument Systems Honeywell, Inc Yokogawa Electric Corp
813
Ametek-Rochester Instrument Systems Yamatake Honeywell, Inc Yokogawa Electric Corp THERMO ELECTRIC EUROPE BV WIKA INSTRUMENTS LIMITED
Page 41 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
814
815
Annunciator Panel: Solid State And Plug-In Module CCC: 340033 (9COM- 6000002678) Specification: 34-SAMSS-815; IR343300
MANUFACTURER VENDOR/ PLANT ID 30001909 30003140 30003273 30001249 30001482 LOCATION WOODLAND HILLS, US WASHINGTON, GB HARROGATE, GB Dunfermline, GB W CHICAGO, US LIMITATIONS None None None None None
RONAN ENGINEERING COMPANY RONAN ENGINEERING LIMITED RTK ENGINEERING LTD Ametek-Rochester Instrument Panalarm Division
817
Graphic Displays 9COM- 6000002745 (CCC 340106) - Graphic Display: Mapboard and Process Diagrammatic
MANUFACTURER VENDOR/ PLANT ID 30001249 10003364 30003140 30003273 10015046 LOCATION Dunfermline, GB St Neots, GB WASHINGTON,GB HARROGATE,GB Velbert, DE LIMITATIONS None None None None None
Ametek-Rochester Instrument ABB AUTOMATION LTD Ronan Engineering Co. RTK Engineering Mauell
Page 42 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
818
820
Control Panels; Indoor; Hardware-only; Does Not include integrators CCC: 340057 (9COM- 6000002697) Specification: 34-SAMSS-820 Commentary note in paragraph 5.3 applies.
821
Control Panels; Outdoor; Hardware-only; Does Not include integrators CCC: 340058 (9COM- 6000002698) Specification: 34-SAMSS-821 Commentary note in paragraph 5.3 applies.
822
Emerson Process Management Foxboro Co. (Invensys) Honeywell, Inc Yokogawa Electric Corp
Page 43 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
825
Tyco Potter and Brumfield Cutler Hammer Omron Phoenix Contacts Allen Bradley/Rockwell Automation
826
Emerson-Fisher Controls Co. Fairchild Industrial Products Co. Siemens- Moore Products Marsh Bellofram
827
Automatic Switch Co. (ASCO) Automatic Switch Co. (ASCO) Automatic Switch Co. (ASCO) Circle Seal Controls Maxseal (FCX Thompson Valves Parker-Skinner Valve Division Versa Valves
Page 44 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
828
Transducers - Signal Conversion 9COM- 6000002848 (CCC 340217) - Transducer: Signal Conversion 828.1 (I/P) Transducers
VENDOR/ PLANT ID LOCATION All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted 30000428 JUBAIL, SA http://www.sea.siemen s.com/ia/default.html LIMITATIONS None None None None None None
MANUFACTURER Emerson-Fisher Controls Co. ABB instrumentation Ltd ABB Automation Foxboro Co. (Invensys) MASONEILAN DIVISION DRESSER AL-RUSHAID VALVE AND Moore Products (Siemens)
828.2
E/I Transducers
VENDOR/ PLANT ID LOCATION All Locations Accepted All Locations Accepted All Locations Accepted LIMITATIONS None None None
829
Automatic Switch Co. (ASCO) Automatic Switch Co. (ASCO) Versa Valves
Page 45 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
830
Controller; Programmable Logic CCC: 340068 (9COM- 6000002708) Specification: 34-SAMSS-830, IR344000
MANUFACTURER VENDOR/ PLANT ID 30003832 30001686 30001908 30001252 30001468 LOCATION LIMITATIONS S7-400 Series Only None None None None Can be used as a hybrid controller for systems with less than 50 PID loops. P&CSD review and approval for hydrocarbon facilities. Can be used as a hybrid controller for systems with less than 50 PID loops. P&CSD review and approval for hydrocarbon facilities.
SIEMENS AG-A&D AS EWK GE FANUC AUTOMATION ALLEN BRADLEY/ROCKWELL AUTOMATION ABB INSTRUMENTATION AEG SCHNEIDER AUTOMATION INC. Honeywell HC900
Yokogawa Stardom
831
Package Unit Instrumentation Commentary note in paragraph 5.3 applies. Mandatory requirements are specified in 34-SAMSS-831.
900
Page 46 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
905
Foundation Fieldbus (FF) Wiring Blocks 9COM- 6000010781 Specification: Mandatory requirements are per SAES-J-904
MANUFACTURER VENDOR/ PLANT ID 10005043 10001178 10015196 10020228 LOCATION Luton, UK Demmel, NL Mannheim-Schonau, DE North Hills, US LIMITATIONS None None None None
MTL/Relcom Inc. MTL/Relcom Inc Pepperl & Fuchs, Moore Industries/Moore Hawke
906
Foundation Fieldbus (FF) Terminators 9COM- 6000010826 Specification: Mandatory requirements are per SAES-J-904
MANUFACTURER VENDOR/ PLANT ID 10005043 10001178 LOCATION Luton, UK Demmel, NL LIMITATIONS None None
Page 47 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
911
Junction Boxes Electrical 9COM- 6000000794 (CCC 150002) - Box: Junction; Aluminum, Steel, Iron, Plastic or Fiberglass; Bodies and Components 9COM- 6000000830 (CCC 150056) - Box: Junction; Explosion Proof
MANUFACTURER VENDOR/ PLANT ID 10017271 10012799 10020718 http://www.h ubbellwiegmann.c om/ 10013570 30003116 10002330 LOCATION Syracuse, US Dammam, SA 2100 Hoffman Way, Anoka, MN, US St. Louis, MO, US Khobar, SA Herborn Kent, UK LIMITATIONS None None None
912
Page 48 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
913
Instrument Wire and Cable 9COM- 6000000805 (CCC: 150015)- Cable: Instrumentation & Thermocouple; per 34-SAMSS-913 9COM- 6000002686 (CCC 340041) - Cable: Instrumentation & Control; per 34-SAMSS-913 Specification: 34-SAMSS-913; IR347600
MANUFACTURER VENDOR/ PLANT ID 30000017 30000660 30003774 30001526 30003545 30001824 30001857 30001422 LOCATION STOLBERG,DE RIYADH,SA Saddle Brook, US RICHMOND,US COBOURG,CA MOUNT PLEASANT,US ASHTON,US Hyogo Pref., JP LIMITATIONS None None None None None None None None
KERPENWERK GMBH AND CO MIDDLE EAST SPECIALIZED CABLES CO. TE WIRE AND CABLE LLC* BELDEN WIRE & CABLE BELDEN (CANADA) INC. DEKORON WIRE AND CABLE THE OKONITE COMPANY OKAZAKI MANUFACTURING *
Thermo Electric Wire and Cable LLC was spun off Thermo Electric Co Inc (30001963). A new SAP manufacturer ID is required for the Cable company.
915
Tubing; Metallic 9COM- 6000000028 (CCC 010029) - Tubing: Alloy 9COM- 6000000068 (CCC: 010206) Tubing Metallic; Stainless Steel
MANUFACTURER VENDOR/ PLANT ID 30000064 30000208 30003548 30001254 30003143 30003519 30001449 30001729 30001916 10012889 LOCATION TERNITZ, AT STORFORS, SE FAGERSTA, SE SANDVIKEN, SE ARNPRIOR, CA CLARKS SUMMIT, US AMAGASAKI-SHI, JP NORRISTOWN, US MARKHAM, CA Pune, IN LIMITATIONS None None None None None None None None None None
SCHOELLER-BLECKMANN AVESTA SANDVIK TUBE AB AVESTA POLARIT STAINLESS TUBE AB SANDVIK MATERIALS TECHNOLOGY AB SANDVIK STEEL CANADA SANDVIK TUBULAR PRODUCTS SUMITOMO METAL IND. HANDY & HARMAN INCORPORATED ASSOCIATED TUBE INDUSTRIES The Indian Seamless Metal Tube
Page 49 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
916 918
Sun Shades (DELETED) Cable and Support Tray 9COM- 6000000744 (CCC 140009) - Cable Tray: Aluminum 9COM- 6000000775 (CCC 140044) - Cable Tray: Fiberglass
MANUFACTURER VENDOR/ PLANT ID 30000881 30003168 30002063 30000242 30001034 LOCATION JEDDAH, SA GREENVILLE, US HIGHLAND, US DHAHRAN, SA DAMMAM, SA LIMITATIONS None None None None None
SAUDI ELECTRIC INDUSTRIES COMPANY M. P. HUSKY COOPER B-LINE, INCORPORATED ABAHSAIN-COPE SAUDI ARABIA LIMITED WAHA ELECTRIC SUPPLY COMPANY OF
919
Tyco-Anderson Greenwood Instrumentation Hoke, Inc Oliver Valves Limited Merwede Valves Parker Hannifin Parker Hannifin Swageloc Highland HY-LOK CORPORATION
Page 50 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
920
Valve Manifolds for Instrument-Process Interface 9COM- 6000002768 (CCC 340131) - Manifold: Instrument or Pressure Note: Manifolds supplied by the approved transmitter manufacturers are acceptable
MANUFACTURER VENDOR/ PLANT ID 30001781 30002062 30000035 10002440 30001868 10022527 30004251 LOCATION Harlingen, US Spartanburg, SC, USA Knutsford, GB UK Jacksonville, AL, US 16101 Vallen Dr., Houston, TX 77041 Busan, KR LIMITATIONS None None None None None None None
Tyco-Anderson Greenwood Instrumentation Hoke, Inc Oliver Valves Limited Parker Hannifin Parker Hannifin Vesta-PGI-Manufacturing HY-LOK CORPORATION
921
Emerson-Fisher Controls Co.) Fairchild Industrial Products Co.) IMI Norgren Marsh Bellofram
Littleton, US
9 Castle Park Queens Drive, Nottingham, NG2 1AH Hermitage Lane, Maidstone, Kent, ME16 9NT, UK
Parker Hannifin
10020634
None
Page 51 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
922
Tubing Fittings 9COM- 6000000221 (CCC 030015) - Fitting: Tubing; 316 SS Flared 9COM- 6000000208 (CCC 030001) - Fitting: Tubing; 316 SS FLARELESS/COMPRESSION
MANUFACTURER VENDOR/ PLANT ID 30001581 30004267 30002062 10032873 30001868 30004251 LOCATION HIGHLAND HEIGHTS, US BARNSTAPLE, UK SPARTANBURG, US MAINZ-KASTEL, DE JACKSONVILLE, US Busan, KR LIMITATIONS None None None None None None
Crawford Fitting Co. (Swagelok) Parker Hannifin (CPI & A-Lok) Hoke Incorporated (Gyrolok) Parker Hannifin (CPI & A-LOK) Parker Hannifan HY-LOK CORPORATION
Revision Summary Major revision. Minor revision to change the title and update vendor approvals. Minor revision to update vendor approvals.
Page 52 of 52