You are on page 1of 2

BIDDING DOCUMENT FOR

CIVIL WORKS FOR UNDERGROUND ROCK CAVERNS(PART- A) FOR STARTEGIC


STORAGE OF CRUDE OIL PROJECT AT VISAKHAPATNAM, ANDHRA
PRADESH(INDIA) OF M/S ISPRL

BIDDING DOCUMENT NO.: 6838/T-167/06-07/RKS/01


TABLE OF CONTENTS (Master Index)
S.NO Description No of Pages
Cover Page 1
Table of Contents 2
PART – A COMMERCIAL
SECTION A-1 GENERAL
A-1.1 DELTED -
A-1.2 Letter inviting bids 3
A-1.3 Performa for Acknowledgement letter 3
A-1.4 Special Instructions to bidders 16
Appendix -1 to SITB 12
Appendix-2 to SITB 8
A-1.5 Check-list for bid completion (Commercial) 5
A-1.6 Commercial questionnaire 5
A-1.7 Proposal Forms 28
A-1.8 Schedule of Rate/Quantities 17

SECTION A-2 CONDITIONS OF CONTRACT


A-2.1 General conditions of Contract 158
A-2.2 Special conditions of Contract 16
- Annexure-I: Time Schedule
- Annexure-II: Measurement of works 8
- Annexure-III: Terms of Payment
- Annexure-IV: Approval of Construction Sub-contractor 1

SECTION A-3: PROJECT EXECUTION AND ASSURANCE PLAN


A-3.1 Procedure 03
A-3.2 Organization 02
A-3.3 Communication 05
A-3.4 Coordination 04
A-3.5 Meetings 05
A-3.6 Reporting 03
A-3.7 Procurement and sub-contracting 09
A-3.8 Construction management and Supervision 12
A-3.9 Risk Management 02
A-3.10 Planning, scheduling and monitoring 50
A-3.11 Safety, health and Environment 66
A-3.12 Cost Control 02
A-3.13 Contract closing 05
A-3.14 Quality Assurance system 17

SECTION A-4 DOCUMENTATION 09

SECTION A-5 GEOTECHNICAL REFERENCE CONDITIONS 14

1
S.NO Description No of Pages
Cover Page 1
Table of Contents 2

PART-B BASIC ENGINEERING DESIGN FOR U/G WORKS 70

PART-C
SECTION C-1 SCOPE OF WORKS & SUPPLIES
C-1.1 Introduction & description 08
C-1.2 Preamble (scope of work) 04
C-1.3 Engineering 04
C-1.4 Construction Facilities 10
C-1.5 Underground Construction 05
C-1.6 Battery Limit & interfaces 02

SECTION C-2 TECHNICAL SPECIFICATION FOR DESIGN AND


CONSTRUCTION - FOR U/G WORKS AND STANDARD
SPECIFICATIONS
C2.1 TECHNICAL SPECIFICATION 74
C2.2 MEASUREMENT AND PAYMENT 08
C2.3 STANDARDS AND SPECIFICATIONS 190

PART-D DRAWINGS 29

PART-E REPORTS 550


E1 Geotechnical Factual Report

You might also like