You are on page 1of 7

A.

Saudi Arabian Standards


SAS 14/1396 Pipes for Potable Water of Unplasticized Plastic (Poly Vinyl Chloride) Method of Testing Pipes for Potable Water of Unplasticized Plastic (Poly Vinyl Chloride)

SAS 15/1396

SASO/SSA-2/79 Steel Bars for Reinforcement of Concrete SASO 39/1978 SASO/SSA-53 SASO/SSA-55 Mechanical Test of Welded Joints Graphic Symbols PVC Insulated Cables

B.

Company Materials Standard Specifications


01-TMSS-01 (Rev. 1) 10-TMSS-01 (Rev. 1) 10-TMSS-05 (Rev. 0) 11-SDMS-03 (Rev.01) 11-SMSS-11 (Rev.2) 11-TMSS-02 (Rev.0) General Requirements for All Equipment/Materials Conductors, Bare Bare, Copper-Clad Steel Grounding Conductor and Ground Rod XLPE Insulated Power Cables for rated voltages from 15kV upto 36kV Instrumentation Cables, Shielded 110kV,115kV,132kV,230kV or 380kV XLPE single core copper power cable

11-TMSS-10 (Rev. 0) 12-SDMS-01 (Rev. 0) 12-TMSS-02 (Rev. 0) 12-TMSS-10 (Rev. 0) 12-TMSS-11 (Rev. 0) 15-TMSS-07 (Rev. 0) 20-TMSS-01 (Rev. 0) 23-TMSS-01 (Rev. 0) 23-TMSS-02 (Rev. 0) 24-TMSS-01 (Rev. 0) 31-TMSS-01 (Rev. 0) 31-TMSS-02 (Rev. 0)

Power and/or Control Cable, Cu. or Al. conductor, 600/1000V Rating Cable Joints, Terminations and Accessories up to 36 kV Compression Type Connectors for Overhead Transmission lines Splice & Termination kits for power cables 69kV,115kV,132kV, 230kV,380kV link boxes for grounding of Underground power cable RTV Silicone Rubber Insulator Costing Latticed steel structures PVC Conduits and Fittings for Underground Cables Duct Sealing Unit Metallic Cable Tray Systems Panels, Relay and Control Auxiliary AC/DC Panels

31-TMSS-08 Terminal Blocks (Rev. 0) 32-TMSS-02 (Rev. 1) 35-TMSS-01 (Rev. 0) 38-TMSS-03 (Rev. 1) 38-TMSS-04 (Rev. 0) 38-TMSS-05 (Rev. 0) 38-TMSS-07 (Rev. 0) 40-TMSS-02 (Rev. 0) 40-TMSS-03 (Rev. 0) 46-TMSS-01 (Rev. 0) 46-TMSS-02 (Rev. 0) Switchgear,SF6 Gas Insulated, 69kV,115kV,132kV,230kV or 380kV Surge Arresters, 13.8kV through 380kV Nominal Remote Terminal Unit (RTU) Sequence of Event Recorder

Annunciator Systems

Online partial discharge monitoring system Metering Devices Automatic Meter Reading (AMR) System

Vented Type Lead Acid Stationary Battery

Battery Charger

48-TMSS-06 (Rev. 0) 50-TMSS-01 (Rev. 0) 51-TMSS-01 (Rev. 0) 54-TMSS-01 (Rev. 1) 70-TMSS-02 (Rev. 0)

Medium Density Fiber Optic Terminal Equipment Current Transformers, 11kV through 380kV Pad Mounted Station Service Transformer up to 2 MVA Mineral Insulating Oil for Electrical Apparatus Chainlink Fence

70-TMSS-03 Normal Weight Ready Mixed Cement Concrete (Rev.0) 73-TMSS-01 Air Conditioning Units, Packaged (Rev.0) 73-TMSS-05 Centrifugal Exhaust Fans (REV.0) 75-TMSS-01 Plastic Piping for Plumbing Systems (Rev.0) 83-TMSS-01 Submersible Sump Pumps (Rev.0) 90-TMSS-01 Panels, Fire Protective Signaling (Rev.0) 90-TMSS-03 Portable Fire Extinguishers (Rev.0) 94-TMSS-01 Automatic Electric Water Heaters (Rev.0) 90-TMSS-08 Emergency shower and Eye (and Face) Wash Equipment (Rev.0)

Note: All blanks n the Data Schedules, Inquiry Information (for TMSS/SDMS) shall be properly filled-up by the CONTRACTOR (as required) without omission and shall be submitted as part of the CONTRACTORS Technical Proposal. C. COMPANY Engineering Standards TES-B-106.01 TES-B-106.03 TES-B-106.04 TES-B-106.05 TES-B-106.06 TES-H-107.01 (Rev.0) TES-H-107.02 (Rev.0) TES-K-100.01 (Rev.0) TES-P-103 TES-P-104 TES-P-119 TES-S-101.01 thru 31 SES-W-1 (Rev.0) Fire Detection And Alarm Systems CO2 Total Flooding System Deluge System HFC-227ea Cleam Agent Extinguishing Systems FK 5-1-12 Fixed Installation Total Flooding Clean-agent Fire Extinguishing System Painting Standards Paint Color Codes and Standards Heatinh, Ventilating And Air Conditioning System Design Batteries and UPS Standards Underground Cable Engineering Standards Substation Design Standards Safety and Security Standards General Welding Criteria

D. COMPANY Construction Standards TCS-M-112.01 (Rev.0) TCS-P-104 TCS-P-105 TCS-P-122 TCS-K-100.01 (Rev.0) TCS-Q-113.01 (Rev.0) TCS-Q-113.02 (Rev.0) TCS-Q-113.03 (Rev.0) TCS-Q-113.04 (Rev.0) General Purpose Fencing Underground Cable Construction Standards Pre-Commissioning Tests/Procedures for SEC Transmission Electrical Installations Transmission Line Construction Standards HVAC Systems and Equipment Installation Asphalt Concrete Paving Earthworks Cast-In-place Concrete Precast Concrete works

E. COMPANY Standard Drawings TA-800004 Lighting/Lightning Steel Monopoles (Rev.0) TA-800012 (Rev.0) TA-800023 (Rev.0) TA-800024 (Rev.0) TA-800062 Precast Concrete Boundary Wall (Plan, Elevation & Details) Door Schedule & Details Finish Schedule / Miscellaneous Details Typical Duct Bank Sections, Concrete Duct Bank 69Kv to 380Kv

TA-800078 (Rev.0) TA-800113 (Rev.0) TB-800067 (Rev.0) TB-800076 (Rev.0) TB-800091 (Rev.0)

Typical Detail of Conduit Mounting on the Gantry Structure for Non-metallic Fiber Optic Cables Chain Link Boundary Fence Direct Buried Cable Trench Details in Rocky Area (Communications) Standard Precast Handhole for Communication in Non Traffic Areas (1.20m x 1.20m x 1.20m) Concrete Encased Duct Detail for Rocky Areas (Vital Communications)

You might also like