You are on page 1of 1

2000-SERIES Data Sheet Ref.

No :
SD-2002-001 sdtork ®
Electrical Actuator Technical Specifications Quotation Ref. No
Quotation Date
1. ITEM Single Phase Damper Electrical Actuator
2. MAKE sdtork
3 APPLICATION Damper Operation
4 ACTUATOR DETAILS (With standard Accessories)
4.1 Type 2000-SERIES
4.2 Model
4.3 Out Put motion. Linear
4.4 Output Force Actuating – Kg
4.5 Out put speed – mm/Sec
4.6 Stroke Length
4.7 Time of operation
4.8 Manual over-ride Provided Hand wheel with clutch.
4.9 Travel Limit Switches Provide: 2 Nos.
Type : 1NO+1NC, change over type contacts
4.9 Torque Limit Switches Not required as motor used is stall duty
4.10 Local Position Indicator Provided Continuous type
4.11 Class of Protection
4.12 Duty
4.13 Weight of the actuator
4.14 G. A. Drawing
4.15 Area of Operation
5 MOTOR DETAILS
5.1 Type Non blocking A.C. Synchronous motor
5.2 Supply 220 VAC 50 Hz 1 Phase
5.3 Duty Regulating
5.4 Insulation Class B
5.5 Rating
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided / Not Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided / Not Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided / Not Provided
Supply : 12-36 VDC, Out put : 4-20 m A
5.4 Remote Position Digital : 0-100 % Provided / Not Provided
indicator
5.5 Interface Card Input signal : 4-20 m A, Provided / Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Servo controller Input signal : 4-20 m A, Out put : 4-20 m A Provided / Not Provided
(Valve positioner) Feed back : 100-235 Ohms, supply 230 V
Panel Mounted AC, This will have auto calibration facility.
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :
For Sdtork Controls Pvt. Ltd.

You might also like