Input Vertical Curve Information: Algebraic Diffference ### -6.00% Design Speed: 60 mph Between Slopes (G): Sta of Point of Vertical Design K Value for the 345+50.00 151 Inflection (PVI): Crest Vertical Curve Elevation of PVI: 822.60 K Value of Prop. Curve: 158.3 Length of Vertical Curve: 950.00 e Value: -7.13 Grade into Curve (g1): 4.00% Elevation of Curve at PVI: 815.48 Grade out of Curve (g2): -2.00% Sta of Point of Vertical ### 340+75.00 Curvature (PVC): Elevation of PVC: 803.60 ### Note: If the K Value is below that required for Sta of Point of Vertical 350+25.00 Design Stopping Sight Distance, the warning Tangency (PVT): "K Value does not meet AASHTO Design Elevation of PVT: 813.10 Standards" will appear beside the K Value. Sta of High Point of Vert. 347+08.33 Curve Elev of High Point of Vert. 816.27 Curve Vertical Curve Stationing and Note: This Vertical Curve Table will Calculate Elevations: Vertical Curve Stationing and Elevations for Vert. Curves up to 2,000 feet in Length. Curve Station Elevation Description 340+75.00 803.60 PVC ### 341+00.00 804.58 ### 341+50.00 806.42 ### 342+00.00 808.11 342+50.00 809.63 343+00.00 811.00 343+50.00 812.21 344+00.00 813.26 344+50.00 814.16 345+00.00 814.90 345+50.00 815.48 PVI 346+00.00 815.90 346+50.00 816.16 347+00.00 816.26 347+50.00 816.21 348+00.00 816.00 348+50.00 815.63 349+00.00 815.11 349+50.00 814.42 350+00.00 813.58 350+25.00 813.10 PVT Design Control for Design Control for Crest Vertical Curves Sag Vertical Curves Design Design Rate of Stopping Rate of Stopping Vertical Design Sight Vertical Design Sight Curvature Speed Distance Curvature, Speed Distance , (K (mph) (ft) (K Value) (mph) (ft) Value) 15 80 3 15 80 10 20 115 7 20 115 17 25 155 12 25 155 26 30 200 19 30 200 37 35 250 29 35 250 49 40 305 44 40 305 64 45 360 61 45 360 79 50 425 84 50 425 96 55 495 114 55 495 115 60 570 151 60 570 136 65 645 193 65 645 157 70 730 247 70 730 181 75 820 312 75 820 206 80 910 384 80 910 231