Professional Documents
Culture Documents
nokia
n70
RM-84
Transceiver characteristics:
Environmental characteristics:
• Lead-free soldered
SERVICE MANUAL
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
7. SERVICE TOOLS....................................................................................................................................................................................9
8. SW-UPDATE ...................................................................................................................................................................................... 11
CHANGE HISTORY
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to
NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it
is confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service
suppliers, follow these regularly and comply with the given instructions.
While every endeavor has been made to ensure the accuracy of this document, some errors may exist.
If you find any errors or if you have further suggestions, please notify NOKIA using the address below:
mailto:cc-ts-rc.documentation@nokia.com
Please keep in mind also that this documentation is continuously being updated and modified, so watch always
out for the newest version.
Warnings:
1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE
MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF
ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO
DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.
2. THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN
POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.
3. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE
WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE
MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY
ALSO BE SUBJECT TO INTERFERENCE.
Cautions:
1. Servicing and alignment must be undertaken by qualified personnel only.
2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn.
3. Use only approved components as specified in the parts list.
4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment.
5. Ensure all cables and wires are repositioned correctly.
Electrostatic discharge can easily damage the sensitive components of electronic products.
Therefore every Service Supplier has to take care of all precautions, which are mentioned in
the service level related “Service Partner Requirements”, available on NOKIA Online. Also see
ESD Protection Requirements in this Service Manual.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
In this section the technician will get some general hints how to carry out repairs:
o To familiarize oneself with NOKIA product read the tutorials or user guide on www.nokia.com -->Support-->
Phones, by selecting the Phone Model.
o Before starting the repair you must take care of ESD precautions like being in your ESD Protected Area and
connecting your wristband.
o Use gloves to avoid corrosion and fingerprints.
o Protect windows and displays with a film to avoid dust and scratches.
o When cleaning the LCD Module any lint-free cloth can be used (e.g. Micro-Fibre cloth).
o When cleaning the pads you have to use a soft cloth/ESD brush and Isopropanol. It is not allowed to use a
glass fiber pencil because it scratches the surface and will lead later on to corrosion.
o Mechanical parts (except shielding lids and bent parts), which didn’t repair the failure, can be reused, if they
are not soldered.
o When removing the shielding lids make sure to replace them with new ones, otherwise the high-frequency
leakage can have an influence on the device.
o Always use original NOKIA spare parts.
o Check the soldering joints of the parts, which are concerned regarding the indicated error (e.g. soldered
connectors or switches) and resolder them if necessary (Level 2 only).
o Remove redundant soldering flux after repair.
o Meet the torque requirements when assembling the unit (see also the document “torques for transceiver
assembly” on NOKIA Partner Web Site/NOKIA Online).
o Always use your own equipment for testing where you are sure that it works. E.g. if the customer complains
about charger function, please test the phone with your own charger to be sure if phone or charger causes the
malfunction.
o A SIM card is needed for all GoNoGo tests.
o When doing the fault log entries, always note the Item code, which caused the malfunction. Also, fill in the
appropriate part code from the assembly, if needed.
o Please be aware that some malfunctions could be software related and solved by an update.
o First, take care for the latest content pages of Service Bulletins, which are always available for each folder on
NOKIA Online. This is also important to recognize, if existing documents have become invalid.
o The service level indicator at the bottom of each document tells the appropriate destination.
1. Instructions
2. General Service Bulletins
3. Product related documents
4. Spare Part Service Bulletins
5. Service Tools Service Bulletins
6. Common Software Service Bulletins
etc,…
Please also check NOKIA Online (NOL) for latest news and files on a regular basis.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
It is mandatory to watch for newest technical and organizational information on a daily basis to be updated as
required (see “Latest files in Support Library”). Every new information has to be processed and implemented as
soon as possible.
When logged into NOL you can also find needed information in different folder like:
Support Library
Phones
Service Manuals
Service Bulletins
Software
Repair Information
Care Services
Training
Phone Models
Level 1&2 e-learning courses offer a quick overview of the NOKIA phone and support for how to repair and use the
phone:
Overview & Guides Disassembly & Assembly Troubleshooting
Basic information about the Instructions how to disassemble Step-by-step instructions on how to
phone, features and technologies and assemble the phone locate and repair the most common
problems with the phone
To reduce the server traffic it is recommended to download newest version of huge files like videos, Phoenix
packages or Service Manuals only once and distribute it internally for further use.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
This will ensure, that you are using up-to-date order codes only.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
ACF-8
Universal Power Supply is used to power FLS-4S.
DKU-2
USB flash cable
Headset HDS-3
Small and lightweight stereo headset for handsfree functionality
and listening to FM radio.
SS-15
Camera removal tool for Camera Module 2MP. One side is for
disassembly, the other side for assembly.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
SS-51
Camera Removal Tool for CMOS Camera
SS-34
Flex Opening Tool
RJ-94
Soldering Jig
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the
latest version of flash software, which is available on
NOKIA Online.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
1.) You need the following tools. 2.) Always protect the window with a plastic film.
3.) Remove the Battery Cover. 4.) Place the SRT-6 between the A-Cover and Chassis
Assy. Release the 4 plastic clips beginning from the
bottom side as shown.
5.) Remove the Keymat 6.) Protect the LCD with a plastic film.
7.) Also protect the inner side window with a film 8.) Remove the MMC Door from A-Cover.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
9.) Insert the SRT-6 between the Antenna Cover and 10.) Remove the Power Button with tweezers.
Chassis Assy. Additional force may be required while
opening the Antenna Cover clips.
11.) Protect the Camera Rear Bezel Assy with a plastic 12.) Remove the Camera gasket.
film before turning the unit.
13.) Unlock and remove the VGA Camera with the SS-51 14.) Mind the correct position when fitting the Camera
camera removal tool. into its compartment.
15.) Unscrew the 6 Torx size 6 plus screws in the 16.) Lift the UI-frame Assy from Chassis Assy. Mind the
shown order. For Assembly use the reverse order and still connected flex foil of the LCD.
the torque of 25 Ncm.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
17.) Open the flex connector with the SS-34 flex 18.) Unlatch each clip of the LCD from the UI Frame
connector-opening tool. Mind the surrounding Assy carefully by pulling the UI Frame Assy sideward
components while placing the tool. Now the UI-Frame while pushing the LCD forward.
Assy can be removed.
19.) Remove the Earpiece with the dental tool 20.) Also remove the Earpiece Gasket from its
compartment. Always use a new gasket when
reassembling.
21.) Unlatch the BB shield Assembly first. 22.) Then push down and remove the BB Shield
Assembly. The shield can’t be reused again, always use
a new one.
23.) Pull the UI Frame Assy slightly to unlock the UI 24.) Now the UI PWB can be removed easily.
PWB.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
25.) Remove the Engine Module. Place it into the RJ-94 26.) Remove the Vibra Motor with tweezers.
jig immediately.
27.) Pull out the Microphone with tweezers. 28.) Use the DC plug to remove the DC Jack.
29.) Lever out the IHF speaker. Mind the guide pin 30.) Unlock the 5 plastic clips of the Antenna Assy in
when reassembling. the area shown.
31.) Carefully separate the Antenna Assy. 32.) Lever out the Camera Rear Bezel Assy.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
33.) Remove the residues of the Camera Rear Bezel 34.) Remove the Camera Module 2MP with the SS-15
Assy Adhesive completely with the SRT-6. camera removal tool. Always use the RJ-94 rework jig
For assembly always use a new adhesive. as support to prevent mechanical stress to the PWB.
35.) Use the Assembly side of the SS-15 for fitting the 36.) Mind the correct position of the camera while
Camera Module 2MP into its compartment. assembling.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Please refer to the actual information on NOKIA Online. When using delivered tester support files, take care of the
right setup according to the tester type and product type.
Please refer to “Recommended Service Equipment” on NOKIA Online.
http://www.astratec.co.uk/ http://www.cadex.com/
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
When it is necessary to forward of repairs to appropriate service supplier with higher service level we recommend
using the offered swap phone cartons as described in Spare Parts SB-004.
Always Protect the window with a protection film. Put the unit under the stretch film.
Add repair documentation e.g. filled-in service note into Fold the swap carton as shown in Spare Parts SB-004.
the swap carton.
There are two different sizes of swap cartons for common mobile phones.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Service Manual N70 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
Introduction
NOKIA
n-70 Exploded view and component disposal
RM-84
IMPORTANT:
This document is intended for use by authorized NOKIA service centers only.
Copyright © NOKIA
This material, including documentation and any related computer programs is protected
by copyright, controlled by NOKIA. All rights are reserved. Copying, including reproducing,
modifying, storing, adapting or translating any or all of this material requires the prior
written consent of NOKIA. This material also contains confidential information, which may
not be disclosed to others without the prior written consent of NOKIA.
1 VRCP1 VCP1
2 VRCP2 VCP2
3 VR1 VXO RF
Baseband 4 VREF VREFRF01
VBATRF
3 RXresetX
SYS
VCP2 DAC_REF1
0 TXresetX
VXO RXIP
TXRESETX RXIN
RFPWR(5:0)
6 RFBusClk
RFBUSCLK RXQP
RFCTRL(8:0)
7 RFBusDa
RFBUSDAT RXQN
RFCONV(11:0)
8 RFBusEn1X
RFBUSENA VREFP
SLOWAD(6:0) TXQP
2
TXQP VREFCM
TXCCONV(2:0)
3 TXQN
TXQN DAC_REF2
RFCLK(1:0)
0 TXIP
TXIP RFCLKEXT
LPRFCLK
1 TXIN
TXIN
TXC RFCLKN
VREFRF01 RFCLKP
VCP1 VREFM
0 AFCOUT
AFC WTXDET
1 AUXDAC1
RXRESETX RFTEMP
1 RFTEMP
0 TXPWRDET
0
1
8 IREF1
L2003
EXC24CB102U
600R/100MHz
4 1 J7526 R7559
14/90V
Z2003
3 2
GND
R2006
ESDA14V2-4BF2
C2007 C2008 C2009 C2010
10n 10n 10n 10n A1
A3
GND B2
GND GND GND GND GND
C1
C3
R2007
USB_OTG
TAHVO, USB_ACI(7:0)
J2001
17k
RETU 4 J2002
SLAVEPU 1k3
1 DPRXD
0 DMTXD 33R
6 MASTPD2
5 MASTPD1 33R
7 ACI
2.5V J2003
15k
VANA
GND
R2010
R2011
220k
120k
GND
GND
R2009
100R
C2011
270p
GND
GND L2100
EXC24CB102U B2101
0 EARP 1 4
1 EARN 2 3
R2105
C2103 C2104 R2104 14V/50V
1n0 1n0 14V/50V Earpiece
GND GND
BTFM AUDIO(8:0)
L2101 IHF speaker
HFSPP 220R/100MHz L2102 B2102
0
0 3 2 4 5 6 7 1
C2105
HFSPN 56nH L2103
1 1n0
L2104 56nH
14V/50V
14V/50V
RETU
220R/100MHz
N2200 C2106 C2107
R2106
R2107
Backup RETU_3.02 1n0 1n0 X2100
ASSEMBLED
TAHVO
K10 ChSwS VCP B10 1u0
GND
TAHVO
1 15 J2201
CHSWSTAT
A4 EarDaL FlyHigh B11 C2210
C2221 0
2 J2202 1u0 1u0
Power on key 3
B4
L4
EarDaR
MBusTx
FlyLow A12 C2211
4u7 GND TXC_CONV(2:0) RF part
GND
5409235 4 7 J2204 A3 PMARP MBusRx K4 GND
5 J2205 C4 PMARN MicData B5
S4401 0 J2206 M5 K3
14V/50V
SerClk PURX
R4406 1 J2207 L5 SerData RetuInt K8 J2208 Depends on SIM = 1.8V/3V
2 J2209 K5 SerSelX SlClk M9 3 VSIM1
GND J10 7
8 11 SleepX
9 0 J2210
J2211
M6
L7
TxCClk MBus H11
E10
2 TxCCtrl RstX 0
1 J2212 L6 TxCDa 1 R2700
M8 2 EMIF03-SIM01F2
AFC
GND 12 13 M10 HV TxC1 K7 X2700
M7 1 M-SK_200300331
TxC2 R1
SIMClkC1 C7 0 3 7
0 J2213 R2
C5 SIMClk1 C8 2 2 6
2 J2214 C6 SIMDa1
SIMDaC1
SIMRstC1 C11
R3
GND 1
SIM 5
1 J2215 A5 SIMIOC1 B9
SIMClkC2
RAP3G DIG_AUDIO(5:0) L2202 B6
A6
SIMClk2 SIMDaC2 A9 GND
SIMDa2 SIMRstC2 D10
C2225 C2226 C2227 B7
220R/100MHz SIMIOC2 GND C2700
1u0 1u0 1u0
GND GND GND 100n
L2204 C12 L10
VBat1 TM GND GND
600R/100MHz C2230
K11 VBat2 Gnd1 D11
GND PURX = 1.8V Local mode = 1.4V
1u0 A8 VBat3 Gnd2 K12
TAHVO, CBUS(3:0) L2203 GND
H12 VBat4 Gnd3 B8
GND
GND SMPS
VCOREA
F12 K6
RAP3G C2228 B12
VBat5
VBatCP
Gnd4
GndCP A11
GND J7548 0
N4200
600R/100MHz 1u0 GND C2242
GND
B3 VBatH GndH B2
GND
1
J2218 2
LM2708H-1.35V_1.05V
12p 4V
U//U
J2219 3 VBAT
J2220 A1 FB SGND A2
TXC(2:0) L2206
GND L4201
GND
RAP3G 600R/100MHz
C2232 C2235
B1 VSEL VDD A3
1u0 1n0
INT_SIM(5:0) 220R/100MHz
GND C1 ISEL PVIN B3
L2205 GND 4
1 0 J2221 L4200 C4201 C4202
7 GND D1 C3 22u 10n
220R/100MHz C2231 SYNC/MODE SW
10U
Local mode = 1.8V 2 D2 EN PGND D3
10uH GND GND
GND C4200
SleepX=1.8V 22u
RAP3G ACI(1:0)
(localmode) GND GND
4V RAP3G, OMAP,
PUSL(7:0)
TAHVO, BTFM
VBAT APE regulator 1.8V
N4201 VDDR_APE
VEN LP3999ITLX VOUT
CBYP -1.8_NOPB
Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 08.08.2005 N-70 RM-84 Board version: 1MV_15 RETU, SIM, Audio Page 4(12)
USB_ACI(7:0) System connector,
RETU
Flash interface
USB=3.5V
L2301 FBUS=2.5V INTUSB(8:0) OMAP
4V VBAT J2060
220R/100MHz VBUS
C2303 GND
C2300 C2301 VPP
10n 22u 1u0
C2309
22u GND GND
1 2 3 4
GND
Local mode = 1.4V TAHVO
6 7 8
VCORE N2300 PUSL(7:0) RAP3G, RETU, OMAP, BTFM
TAHVO_V4.1
GND
VIO 1.8V
A7 VBAT1 Slave_PU J10 4
C2304
L2302 A6 VBAT1 Master_PD1 H9 5 10n
C2243
System connector CHARGER C2302 12p A5 VCoreCoil Master_PD2 J9 6 GND
22u B6 VCoreCoil CLK J6 3
10uH
GND GND
B4
B5
VCore RXD2 K7
J7
2 EMINT(1:0) RAP3G
GND GND1 D+_RXD 1
A4 GND1 D-_TXD K8 0
4V VPP_VIO A1
VBAT D10 VCharIn1 VCCint K9
E10 VCharIn2
R7556
E9 A3
100R
F10
VCharInK
VCharOut1
VIO CBUS(3:0)
RAP3G, RETU
PMEG3020EJ G10 J4 5
VCharOut2 OEX
F9 VCharOutK FSE0 K4 4
V7501 VO J5 3
SLOWAD(6:0)
RETU 4 J2300
J2301
D9
J1
VCharADC RCV_FRX2 K2
J3
2
CHSWSTAT ChSwS VP_FRX 1
F1 SMPSClk VM_CLK K3 0
F2 GND4 FTX K5 6
GND
Current control
G9 K6
J8
VBAT3
GND3
SLAVESWSET 7
C2316 for keypad backlight
1n0
RSTX B3 2 from keyboard
A10 NC PURX D2 0
B10 NC SLEEPX D1 3 connector
1
A8 NC TahvoInt C2 J2302 4V SETCURR2
C10 NC CbusData C1 1
4V VBAT
B8
CbusSelX B1
B2
2
0
Lights on = ~ 0.7V
NC CbusClk R2305
C2307 GND A9 GND5 VcoreDef C9
GND 33R (Display & Keypad)
2u2 FlashM A2
H10 Vout TestMode B7 GND
TestOut B9 V2300
GND G2 J2
SENSE+ GenOut1 DTC143ZETL OUT
GenOut2 K1 19
Accessory VOUT H2 SENSE- GenOut3 H1 IN R1
R2301
R2302
4k7
10k
L2304
VLEDOUT1 VLEDOUT2
22uH
LED driver
N2301
TK65600B-G
J2309 A2 EN VOUT C1
C2 IND VDD B1
Lights on = 1.8V B3 A1
C2315
4u7
FB AGND
C2314
A3 NC PGND C3 4u7
8 GND
K7
L7
VrefN
Iref1
GENIO25
GENIO26
AA3
W4
21
16 0
GEN_CTRL_CMT(20:0) OMAP
GENIO27 Y3 18
1 A19 TxCDa GENIO28 AA2 19
RETU TXC(2:0)
2 A20 TxCDaCtrl GENIO29 P9
0 D17 TxCClk GENIO30 W11 1
GENIO31 V11
V17
0 BTFM_clock_request BTFM
GENIO32
GENIO33 W18
GENIO34 V16
GENIO35 W17
Y17
RETU, TAHVO CBUS(3:0)
0 P13 CBusClk
GENIO36
GENIO37 P14
1 V12 CBusDa GENIO38 W16 SDRAM
RETU ACI(1:0)
2
0
W12
D16
CBusEn1X
ACIRx
GENIO39
GENIO40
Y16
V15 64 Mbit SDRAM
1 B18 ACITx GENIO41 W15 D3001
GENIO42 Y15 K4M64163PH-VG1L
1
RETU DIG_AUDIO(5:0) 2
W8
Y8
EarDataL
EarDataR
GENIO43
GENIO44
AA15
R14 SDRAM 4Mx16
3
0
Y9
R10
MicDa
AudioClk
GENIO45
GENIO46
V14
W14
0 J9
J10
0 1.8V
4 W9 R13
1
PMARP GENIO47
5 V9 AA7 2 K8
PMARN GENIO48 VIO
GENIO49 V8 3 K9
GENIO50 P10 4 K2
6 N4 RFBusClk GENIO51 Y7 K3
N2
5 0
7 RFBusDa A
M8 G14 6 J1
8 RFBusEn1X GENIO53 4194303
3 RXRESET P3 GENIO52 GENIO54 B20 7 J2
J3
BTFM PCM(3:0)
0 Y13 I2SSCLK
GENIO55
GENIO56
C19
P2
8
9 H1
1 V13 I2SWS GENIO57 P4
10 J8
2 W13 I2SSD1 GENIO58 P7 C3006 C3007 C3008
H2 C3001 C3002 C3003
3 Y12 I2SSD2 GENIO59 R1 11 11 100n 10n 100n 100n 100n 10n
6 4 GENIO60 R2
2 2 1 Y2 USBVP_FRX GENIO61 R3 0 H9 BA0
0 W3 USBVM_Clk GENIO62 R4 J3115
1 1 1 H10 BA1
2 V4 USBRCV_FRX2 GENIO63 T2 SDRAM_BA(1:0) GND GND GND GND GND GND
0 0 3 W2 T3 J3116 2 G10 _RAS NC E10
USBVO GENIO64
3
OMAP, TAHVO INTUSB(8:0)
4
5
J2803 U4
V3
USBFSE0_FTX GENIO65
USBOEX GENIO66
R12
P12
G9
H8
_CAS
_CS
NC
NC
E9
F8 1.8V
V2 V10 GND
USBDSyncClk GENIO67 4 G8 F3
P11
_WE NC
GENIO68 0
D18 P8
G2 CLK NC G3 VDRAM
0 SIMClk1 GENIO69
1 C20 U1 1 G1 CKE NC H3 GND
RETU INT_SIM(5:0)
2 E18
SIMIOCtrl1
SIMIODa1
GENIO70
GENIO71 U2 SDRAM_CTRL(10:0) 6 F2 UDQM NC E2
U3 J3117 5
GENIO72 F9 LDQM NC E1
D2 JTClk GENIO73 T4
E4 JTrst SpeciallO0 B19 J3118
SDRAM_DA(15:0) A9
F4 JTDI SpeciallO1 C18
E3 JTMS SpeciallO2 C17 0 DATA I/O
E2 JTDO SpeciallO3 B17 1 B8
J7 EMU0 2 B9
SDRDa0 F19 J2804 0
G19 3 C8
SDRDa1 1
A7 ETMClk SDRDa2 G18 2 4 C9 C3004 C3005 C7616
B7 ETMPkt0 SDRDa3 H18 3 5 D8 100n 100n 10n
C7 ETMPkt1 SDRDa4 F18 4 6 D9
D7 ETMPkt2 SDRDa5 H19 5
C6 E19
7 E8
ETMPkt3 SDRDa6 6
H8 ETMPkt4 SDRDa7 J18 7 8 E3
GND GND GND
B5 ETMPkt5 SDRDa8 L19 8 9 D2
C5 ETMPkt6 SDRDa9 R18 9 10 D3
D6 ETMPkt7 SDRDa10 M18 10
B4 P19
11 C2
ETMSync SDRDa11 11
C4 N18 12
12 C3
ETMPipe0 SDRDa12
D5 ETMPipe1 SDRDa13 P18 13 13 B2
A3 ETMPipe2 SDRDa14 M19 14 14 B3
B3 ETMSyncB SDRDa15 N19 15
SDRAM_AD(15:0) 15 A2
D4 ETMPipeB0
A2 ETMPipeB1 SDRAd0 E20 J2805 0
C3 ETMPipeB2 SDRAd1 F20 1 A10,F10,K10= VDRAM
RETU, TAHVO EMINT(1:0)
0 H13 RetuInt
SDRAd2
SDRAd3
N20
C21
2
3
A8,B1,C10,D1=
A1,F1,K1=
VIO
GND
1 W10 TahvoInt SDRAd4 K15 4
5 A3,B10,C1,D10= GND
SDRAd5 T20
6
1.4V VCORE
AA13
AA17
VDDDSP1
VDDDSP2
SDRAd6
SDRAd7
M15
L15 7
R21
Y14
VDDDSP3 SDRAd8 J15
T19
8
9
Flash
VSSDSP1 SDRAd9
Y18 VSSDSP2 SDRAd10 R20 10 64 MBit NOR FLASH
P20 VSSDSP3 SDRAd11 L14 11
GND E21
A17
VDDMCU1
VDDMCU2
SDRAd12
SDRAd13
K14
J20
10 12
0
D3000
K8S6415ETA-DI7B
D20 VSSMCU1 SDRAd14 G20 1
B16 VSSMCU2 SDRCLK K19 J2806 0 NOR FLASH 4MX16
GND H20 U21
VDD1 SDRCKE 1
AA9 H14 J2807 16 B2 16
VDD2 SDRRASX 2
B1 VDDCORE1 SDRCASX K20 J2808 3 17 A9
G2 VDDCORE2 SDRWEX J14 J2809 4 MEMADDA(24:0) 18 B8
M4 VDDCORE3 SDRDQML J19 J2810 5 19 A8 A
C2800 W1 L18 J2811 6
100n VDDCORE4 SDRDQMU 20 B3
AA5 VDDCORE5 SDRCLKX K18 7
MEMCONT(15:0) 21 A2
Y21 VDDCORE6 SDRLDQS D19 8 21
GND L21 R19 22 A10 NC B5
VDDCORE7 SDRUDQS 9 NC
1.4V H15
A13
VDDCORE8
VDDCORE9
8
0 A4
A9 B9 J2812 0
CLK
VCORE VDDCORE10 ExtAdDa0
A5 B8 1
1 B4 _AVD
VDDCORE11 ExtAdDa1
G3 VDDCORE12 ExtAdDa2 C11 2 VPP 5 B9 _CE
H7 VSSCORE1 ExtAdDa3 C10 3 2 B6
J2818 _RESET
K8 VSSCORE2 ExtAdDa4 D9 4 4 C10 _OE
H4 VSSCORE3 ExtAdDa5 D8 5
3 A6 _WE
C2802 C2803 C2804 C2805 C2806 C2807 M7 VSSCORE4 ExtAdDa6 H10 6 R3000
100n 100n 100n 100n 100n 1u0 Y1 VSSCORE5 ExtAdDa7 G9 7 9 B7 _WP
Y6 VSSCORE6 ExtAdDa8 C12 8 7 A1 RDY
Y10 VSSCORE7 ExtAdDa9 D12 9 10k
C3000
GND P15 VSSCORE8 ExtAdDa10 D11 10 100n
M20 VSSCORE9 ExtAdDa11 D10 11
J21 VSSCORE10 ExtAdDa12 C9 12 D10
GND
B21 VSSCORE11 ExtAdDa13 C8 13 0 ADDRESS/DATA I/O
B14 VSSCORE12 ExtAdDa14 H9 14 1 D9
GND
B10 VSSCORE13 ExtAdDa15 G8 15 2 C7
B6 VSSCORE14 ExtAdDa16 G11 16
GND M2 A15 17
3 C6
VDDSIO1 ExtAdDa17
AA1 VDDSIO2 ExtAdDa18 C13 18 4 D5
AA11 VDDSIO3 ExtAdDa19 B15 19 5 D4
AA21
M14
VDDSIO4
VDDSIO5
ExtAdDa20
ExtAdDa21
C16
G10 23 20
21
6 C3
N21 B13
7 C2
VDDSIO6 ExtAdDa22 22
G21 VDDSIO7 ExtAdDa23 H11 23 8 C9
1.8V 1.8V from RETU A21 VDDSIO8 ExtAdDa24 H12 24 9 C8
A11 VDDSIO9 10 D7
VIO (normal mode) A1
E1
VDDSIO10 FlsClk C15
D15
J2813 0
8 9 11 D6
VDDA FlsADVX 1
G4 VSSA FlsRSTX D14 2 12 C5
C2810 C2811 C2812 C2813 C2814 GND J1 C14 13 C4
VDDARX FlsWEX 3
100n 100n 100n 100n 100n C2801 G1 B12
100n VSSARX FlsOEX 4 14 D2
GND L8 D13
VRFC VDDATX FlsCSX 5 15 D1
GND C2808 L1 VSSATX FlsCS2X G13 6
C2809 GND K2 VSSASUB FlsWaitX G12 7
100n 100n GND
GND A5= VIO 4347113
GND GND B1,D8= VIO
A7= VPP
Customer Care/ Service & Support Readiness / Content Creation Managment A3,C1,B10,D3= GND
Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 08.08.2005 N-70 RM-84 Board version: 1MV_15 RAP3G, SDRAM, Flash Page 6(12)
BTFM LPRF_APE(6:0)
3
Back camera connector OMAP
X1470 SDRAM_DA_APE(15:0)
R1470
D4800
100R
OMAP3PS1.1E
1
2 SDRMDa0 D6 J4800 0
C1470 0 P20 C6 1
3 2 gpio_4 SDRMDa1
1u0 4 5 T20 armio_5 SDRMDa2 C5 2
MESSI_VIDEO_APE(25:0) 5 0 U20 armio_14 SDRMDa3 D7 3
GND 6 SDRMDa4 D5 4
6
7 2 R13 tx1 SDRMDa5 C7 5 Combo memory
R1471
100R
6
UI C1471
1u0
8
9
1
3
V14
R14
rx1
cts1
SDRMDa6
SDRMDa7
C4
D8 7
10 J1472 4 AA15 rts1 SDRMDa8 C10 8 D5000
KEYB_APE(19:0) GND 1 SDRMDa9 D14 9 K5E5657ACB-D085
11
12 M18 tx3 SDRMDa10 D11 10
Tx COMBO 256M DDR
13 VIO Only if back Rx L14
R19
rx3 SDRMDa11 C13
C11
11
12
SDRAM_AD_APE(15:0)
0 C3
256M NAND
14
21 camera activated rts3 SDRMDa12 0
R1473
R1472
1.8V
3k3
3k3
0 J7540 D18 SDRMDa13 D13 13 1 C4
lcdda0
SOCKET 1 B21 lcdda1 SDRMDa14 D12 14 2 D2
2 C19 SDRMDa15 C12 15
lcdda2 3 D3
3
4
Any camera 3
4
G14
H13
lcdda3
lcdda4 SDRMAd0 A2 J4802 0
4 E1
B2 1 5 E2
R1474
0 activated = 1.8V 5
6
A20
B19
lcdda5
lcdda6
SDRMAd1
SDRMAd2 B6 2 6 E3
A
7 C18 SDRMAd3 A1 3 7 H2
33R lcdda7
1 8 D17 lcdda8 SDRMAd4 G10 4 8 J1 NC A3
B9 5 9 J2
9 D16 lcdda9 SDRMAd5 NC A4
RAP3G, TAHVO INTUSB(8:0)
4V 10
11
C17
B17
lcdda10 SDRMAd6
SDRMAd7
G12
G11
6
7
10 J3 NC A11
VBAT
lcdda11 11 K1 NC A12
12 G13 lcdda12 SDRMAd8 G9 8
12 K2 12 NC B2
B12 9
GND Camera regulator 13
14
A17
C16
lcdda13
lcdda14
SDRMAd9
SDRMAd10 B8 10
C5
NC B3
15 D15 lcdda15 SDRMAd11 H10 11 _CS
VOUT VIN 12 1 GND F3
LP3990LDX 2 16 J7541 C20 lcdcsx SDRMAd12 H9 CKE
VEN J1471
-1.5_NOPB 17 J7542 C15 lcdwrx SDRMAd13 H11 13 0 G13 CK NC B12
N1470 SDRAM_BA_APE(1:0)
Any camera C1473 C1472
18
19
J7543
J7544
B18
B15
lcdrdx
lcdcmd SDRMBSA1 B3 0
7
2
G14
F1
_CK
_RAS
NC
NC
B13
C1
1u0 1u0 J7545 C3 1
activated = 2.85V 20 M8 gpio_60 SDRMBSA2
H8 J4803
3 F2 _CAS DDR NC C2
Flash LED GND GND GND
N7505
VBAT
21 J7546 G20 te SDRMWEX
SDRMCLK C9
4
0
0
4 H3
H1
_WEd
BA0
NC
NC
C13
C14
SDRMCKE H12 1
connector VOUT
LP3981YDX
VIN
BYP
8
9
F18
D20
kbc_0 SDRMRASX H7
B4
J4805
J4806
2
3
1
6
G2
F12
BA1
UDQM
NC
NC
D1
D14
VOUT_SENSE -2.8_NOPB kbc_1 SDRMCASX
X1471 10 D19 kbc_2 SDRMDQMU D10 6 5 K13 LDQM NC L1
C7601 C7599 C7600 11 E18 kbc_3 SDRMDQML C8 J4807 5 9 D13 L14
1 UDQS NC
2u2 33n 2u2 12 C21 kbc_4 SDRMCLKX D9 7 8 M12 M1
2 LDQS NC
13 G19 kbc_5 SDRMLDQSH C14 9
MATE GND NC M2
GND GND GND 14 P15 kbc_6 SDRMUDQSL D4 J4808 8
10 J5001 C8 _CE NC
NF V19 kbc_7 cs_sdram G8 SDRAM_CTRL_APE(10:0)
11 J5002 A8 _RE NC M14
0 G18 N4 13 B9 _WP NC N2
kbr_0 ExtAdDa0
L1479 CCP_APE(3:0) 1 12 C7 N3
F19 kbr_1 ExtAdDa1 N2 _WEn NAND NC
2 H14 kbr_2 ExtAdDa2 N7 9 C9 ALE NC N12
27nH 3 E20 P2
kbr_3 ExtAdDa3 8 B7 CLE NC N13
4 E19 P4
C1487
10p
C1485
2u2 DC/ DC converter 5 N19
kbr_4
kbr_5
ExtAdDa4
ExtAdDa5 P7
14 A5 R/_B NC
NC
P3
P4
6 N21 kbr_6 ExtAdDa6 R2
GND GND L1473 K3 A13 NC P5
7 M20 kbr_7 ExtAdDa7 R3
L2 A14 Addr Res NC P10
16 ExtAdDa8 R4
L1480 3u3H L3 P11
1PS89SS05 2 W14 ccpdap ExtAdDa9 T2 A15 NC
N1471 V1470 3 Y14 ccpdan ExtAdDa10 T3 NC P12
27nH
TK11891F-G 4V 0 Y12 ccpclkp ExtAdDa11 P8 B6 LockPre_res
BZX884
GND
V7502
CAM_STROBE
7
1
J4811
J4812
P9
AA9
usb_puen ExtAd20 F2
L8
4 M6
100n GND GND usb0_vp ExtAd21 5 P7
X5200 GND 5 J4813 W9 usb0_txen ExtAd22 K4 N6
6
R1487 0 J4814 R9 usb0_vm ExtAd23 K3
C2 GND 7 M7
C3
C4
Unpressed = 1.8V 6R8
3
2
4
J4815
J4816
Y5
W5
usb0_rcv
usb0_se0
ExtAd24
ExtAd25
L7
E1
3 N10 Data I/O
C5
C6
R5204
Pressed = 0V V1472 1
J4817 V6 usb0_txd 4 DDR
SI1012R 2 W8 mmc2_dat0 nfcs_1 M3 M9
C7 R1489
GND 3 V8 M4 6 M10
2 3 3k3 R1491 mmc2_dat1 FlsCS2X
14V/50V 4 0
W15 N8 N11
GND
8
S5200 VSIM2 MMC inserted = 1.8V VSIM2 2 10k
5 R10
mmc2_dat2
mmc2_dat3
FlsCS3X
nfcs_1b Y1
R4809
2 M11
GND GND 0 Y10 mmc2_clk nfcs_2b P3 1 L13
9 1 4 GND MMC_APE(15:0)
1 Y8 mmc2_cmd FlsCLK N3 3
10 R5200 1k0 L12
6 V9 mmc2_cmddir FlsWrX W2 5
11 EMIF04-MMC02F2 K14
7 V5 mmc2_datdir FlsWaitX V2
12 L5200 7 F14
8 W19 mmc2_datdir1 FlsADVX L4
13 R10 8 E14
600R/100MHz 15 10 R18 mmc2_clkin FlsWrPr V4
14 GND R20
MMCCMD CMD 1 15 U4 12 E13
15 R1 FlsOEX
MMCCLK J5200 CLK 0 Y19 TDI nfrp W1 10 E12
16 R2
MMCDA DATA 2 AA19 TDO 14 D12
17 R3
MMCV V17 TMS 15 C12
18 R4
J5102 Y18 NRST NFlsFD0 F3 0 13
19 C5200 C11
W18 TCK NFlsFD1 D3 1 11 C10
R5100
1u0
10k
V16 EMU0 NFlsFD2 C1 2
GND
GND GND 20 W17 EMU1 NFlsFD3 E4 3
9
G4 I/O_VA2 I/O_VB2 G3
front camera D4 VCCA VCCB D3 P14 mcbsp3_dout SleepClk P13 1
activated C1490
22p
C1489
27p VIO
22p
N18 mcbsp3_fsync APESleepX
SysClk
W4
Y4
J4818
J4819
4
6 0
24 C1491
GND 4
5
J4820
J4821
W11
V11
acflag
caready
arm_boot J20 GND C4813
1n0
GEN_CTRL_APE(20:0) RAP3G
GND GND C1482
100n
C1481
100n
22p 6
0
J4822
J4823
V10
W10
acdata mcbsp2_din P10
AA5
3 GND
caflag mcbsp2_dout
1 J4824 R11 acready mcbsp2_xsync W7
GND 2 J4825 P11 Y6
GND cadata mcbsp2_clkx
GND 7 J4826 V15 acwake gpio_9 R8
3 J4827 W6 gpio_12 armio_4 T19
gpio_41 AA20
J1 VDD4 gpio_59 L3
K2 VSS
reserved
VDD
E5
A15
PUSL(7:0) RETU, TAHVO,
VCAM2
GND
C4807
100n
C4801
1u0
G1
B1
VSS
VSS
VDD
VDD
M2
Y9 RAP3G, BTFM
AA1 VSS VDD Y20
GND GND U2 VSS VDD2 A3
Local mode VCOREA
N1
Y13
VSS
VSS
VDD1
VDD2
AA3
E2
Only if Front camera regulator 4V = 1.4V AA7
K20
VSS VDD2 A9
J21
STLEDB
C4803 C4804 C4802 VSS VDD3
front camera VBAT 100n 100n 100n R21
W20
VSS
VSS
VDD3
VDD3
R20
B20
GND
Only if Y3 VSS VDDSHV4 A7
B10
GND GND VDDSHV4
front camera GND
L1
VDDSHV4 B14
R1
J7524
0 BTFM_RESETX J7529
1 BTFM_UART_TX
2 BTFM_UART_RX
3 BTFM_UART_RTS GND
4 BTFM_UART_CTS J7534
5 BTFM_WAKEUP
6 BTFM_CLK_REQ
OMAP LPRF(6:0)
I2C(1:0) RAP3G
0
1
1.8V
VIO 1.8V 2.5V
VIO VANA
R7549 R7550
C7618
R7544
BTFM 3k3 3k3
0R
D5001
100n FM_ANT X2001
LBMA48EBR2-TEMP GND
R7543
0R
2 ANTENNA CBUSCLK/SCL 10
CBUSDA/SDA 11 AUDIO(8:0) RETU
5 12
R7542
STATUS CBUSENX_IN
5
0R
FMANTENNA 13
7
6 RF_ACTIVE
6
16
R7541
VFMRAD
8
0R
7 FREQ BUSMODE 17
GND
VAFL 19
8 TX_CONFX VAFR 20 C7604
INTX 21 100n 100n
9 CLK_REQ GND GND
R7551
0R
MPX_OUT 39
J7523
38 GND
VIO GND
32 VIO(1.8V) GND 41
NC 46
C7613 C7612 NC 47
100n 100n NC 48
GND GND
GND
GND
Z4401
EMIF02-MIC02F2
2 OUT1 IN1
GND GND
R4408
10k
Switch open 1.85V
Switch closed 0V
R4407 S5202
14V/50V
GND
GND
Slider switch
Display connector
X4401
Z4402
EMIF10-COM01F2 1
GND
OMAP MESSI_VIDEO(25:0)
17 OUT1 IN1 WRX 2
0 3
1
OUT2
OUT3
IN2
IN3
GND
D0 4 1.8V
2 OUT4 IN4 D1 5
VLEDOUT1 SETCURR1 VIO 2.5V
3 OUT5 IN5 D2 6 VAUX
16 7 L4400
OUT6 IN6 D3
19 8 600R/100MHz
OUT7 IN7 GND
OUT8 IN8 VDDL 9
OUT9 IN9 VDD 10
OUT10 IN10 GND 11 L4401
GND LEDIN 12 600R/100MHz
13 C4400 C4401
GND GND LEDOUT
14 1u0 1u0
GND GND GND
CSX 15
Z4403 D/CX 16 C4402
EMIF10-COM01F2 27p0
GND 17
7 OUT1 IN1 D7 18
6 OUT2 IN2 D6 19 GND GND GND
5 OUT3 IN3 D5 20
4 OUT4 IN4 D4 21
21 OUT5 IN5 TE 22 Lights on ~ 14V
18 OUT6 IN6 RDX 23
20 OUT7 IN7 RESX 24
OUT8 IN8
OUT9 IN9 GND
OUT10 IN10 GND
GND GND
GND GND GND
GND GND
GND GND
GND
4V
G 2 A3 INP_2000 VBAT1 E8
VBATRF
G 3 600R/100MHz 28R/100MHz
C6 1u0 18p
800X364 GNDFE1
B9 J1 C7597 C7599
X503 GNDFE2 VBAT3 C7503 C7501 33n
100u_14V
GND
R7560
0R
T7500
GND A2 INM_2000 VR1 E9 GND GND
1u0
GND GND
VCP1
4.75V
A1 OUTP_2000 VR3 J2
LDB212G1410C-001TEMP
B1
50 ohm 2 D1
OUTM_2000
E2
C7504
GND
VXO
2.5V
ANT INP_MIX VCP
4 C1
R7505
39p C7523 RB_EXT 18p 100n
8k2
A5 INP_1900 C7522
SDATA J5 10k
< 1% TOLERANCE GND J7504
GND
150p
GSM 1800 700 1747.8MHz 3495.6MHz ~1.23V
RFBUSDAT
L7506
5p6
RX matching components must be near to the ant SW SCLK H4 GSM 1900 661 1880MHz 3760MHz ~2.53V
28 12nH
C7525
XENA
XRESET
K7
J7
J7505
RFBUSCLK
GND C7524
2n2
GND
WCDMA 9750 1950MHz 3900MHz ~3.17
A4 INM_1900 J7506
RFBUSENA RAP3G RX SHF GND
5p6 B8 VC1 J7515
B4
A10
VC2
VC3 OSCIN F2 C7527
16 RXRESETX
VCTCXO
C9 VC4 OSCIN_REF G1
RX signal GND
18 1.8V
Set Generator: -20dB
B5
B6
REF_DIV
REF_FILT
REF_OUTP
REF_OUTM
G2
G3
100p C7529
100p 4 2.5V +DC
G7501
C7528 R7509
REF_OUTG H2 OUT VC
Freq.: 2140MHz (10700)
D2
C1IP H10
H9 C7530
22p
5
NKG3176B
38.4MHz
10k
AFC
RETU
Set Analyzer: E1
GNDLO
GNDPRE
C1IM
J10
8n2
6 C7533
Center Freq.: 2140Mhz C2IP
C2IM J9 C7532
22n
Switch mode VC1 VC2 VC3 Level: -10dB B2 GNDMIX C1QP G10
8n2 C7531
22p
GND GND
220R
Span: 10MHz F9 GNDFILT C1QM H8 C7534
GND1
DCS/PCS_TX Lo Hi Hi BTFM
F1 GNDCP
CALIN D10
RX signal (Delta Frequency 1MHz) RFCLKEXT
line LPRFCLK
Set RF-Generator: -25dB
25 GSM Channel: 10705 (Freq.: 2141MHz) RXIP
1 RF
B7
C5
NC3
RAP3G
J513 2 G
NC4
Channel: 10700 (Freq.: 2140MHz) RXQN
3 G VREFP H7
X502 VREFM H6
VREFCM K9
VREFCM
GND J7516
~0.8V
436R
GND
C7561
4p7 GND R7506 21dBm 1.80V
DAC203 A1
B2
DAC201
DAC202
30 C7560
GND GND
13 DCS_RF_Out 12 C7558 B1 F1
Vmode DAC203 VDIG
1n0
GND GND GND 4n7 LDB21DM378810CTEMP-3G80
33R 3
L7516 GSM_GND= GND
Z7505 C7563
35 H3 1 50 ohm
L7517
DCS/PCS_GND= LOI_INP GND
1n5H
4p7 H4 5
L7510
LO_INM
4n7H
OUT CES301G95DCB000RB2 IN 600R/100MHz
T7503
Z7506 H2 4
C7564 R7518 C7593 CP_OUT
1n0 4u7 SXS609B1 H5 2
R7520
VCO_IN
270R
GND 200 ohm diff R7519 GND
GND A7
L7511
OUT IN W_OUTP
10nH
470k
GND C7567 A8 E5
1.35V
L7512
GNDGNDGNDGND IN W_OUTM VB_EXT 1k0
4n7H
15p G7502 VCC
1% TOLERANCE
R7523
R7522 GND R7521 C7568
N7503
Power amplifier
9k1
220k GND C8 VC OUT
C7569 RF9252E8.2 RB_EXT C7570 150p IT017_VER_G
1950MHz
4u7 GND A4 P_OUTP 18p
10k
GND 9 Pout
11 ChipDet
Pin 2 WCDMA GNDGNDGND
A5 P_OUTM DAC_REF1
DAC_REF2
E6
F8
GND
GND
C7573
C7571
330p
DAC101 2n2
Vcc12 5 A2 G_OUTP
C7575
DAC201 4 Icont11 Vcc11 7 A3 G_OUTM GND
GND
6 12 15p
Icont12 Vcc11 GND
1,3,8,10,13= GND TX SHF
C7579 C7577
TX signal
10p WCDMA = 2.8V 15p
DAC_REF1
GND R7525
C7580 D1
Set Phone power: 0dB IO_SDATA RFBUSDAT
10R
1u0 H6 GNDVCO SCLK E1
RFBUSCLK RAP3G
Freq.: 1950MHz (9750) PA DC/ DC converter XENA D2
RFBUSENA
5n6H
4 7 B8 D6 J7518
RBW: 100kHz BYP SW
10uH
GNDBB CAL_OUT
GND
RB851Y
RB851Y
C7587
10p
LM2706TLX GND
GND
E2 GNDDIG
TXMUX_OUT E3
R7528
RFTEMP
RETU
TXMUX_IN2 D5
F6 GNDBAT
E4 470k
R7534
R7529 EMPTY1
470k
GND GND G2 F5
VMINUS EMPTY2
C7591
2k2 470p
R7530
10p GND
Power Vcon SW
RETU WTXDET
GND
0 dBm 0.30V 1.54V
C7592
5 dBm 0.39V 1.54V
R7531
3n3
8k2 10dBm 0.51V 1.44V
15dBm 0.83V 1.83V
GND GND
21dBm 1.60V 3.23V
24
28 22
31
VAUX=2.8V
Lights on=14V VCAM=1.5V
5) RFCLK at C7528 6) LPRFCLK at C7615 7) CBUSCLK at J2206 8) CBUSDATA at J2207
VBAT=4V
32
9) CBUSSELX at J2209 10) SDRAMCLK at J2806 11) TXCCLK at J2210 12) TXCCtrl at J2211
VBATT
GND
BSI
VCAM2=1.8V
36
13) TXCDATA at J2212 14) SMPS at J2308 15) AUDIOCLK at J2200 16) SCLK at J7505 VREFRF01 =1.35V VR1(RX active)=2.8V
VREG1 =2.75V 37
35 5
6 26
VDIG=2.5V 4 29 25
33
VCP2=4.75V 17
17) SDATA at J7504 18) XENA at J7506 19) CLK600 at J2305 20) MMCCLK at J5200 34 VREG2(WCDMA)=2.8V
16 TXRESETX=1.8V
18
30 8 SLEEPX=1.8V 1
VR1=2.5V
27
VSim=1.8V
14 VRCP2=4.7V
VRFC=1.8V
9 19 PURX=1.8V 20 Lights on=1.8V
21) Back CAM_CLK at R1474 22) Front CAM_CLK at C1489 23) FLSCLK at J2813 24) DCLK at R1490 MMC inserted=1.8V
15
VRCP1=4.7V
VREFint=1.35V VIO=1.8V
21
11
VCOREA=1.4V 23
7
3 10 12
2
25) RXIQ at J7510 26) RX I/Q WCDMA J7510 27) VR1RX at C7515 28) RX GSM at L7504/ L7506 VANA=2.8V
13
VDDR_APE=1.8V
VDRAM=1.8V
29) RX SHF at T7501 30) TX SHF at L7517 31) TX GSM at J7519-J7520 32) Icont GSM 900 at C7545 33) TXC LOW at C7549 34) TXC HIGH at C7549 35) WCDMA TX at R7520 36) WCDMA TX at L7514 37) WCDMA RX at T7500 Pin 1
Bottom
C2226 D7 C5005 D5 C7608 H2 J3101 I6 J7537 C3 R1474 G5 R7549 F4
C2227
C2228
C2230
B7 C5200
C7 C7501
D7 C7503
H7
C11
C11
C7609
C7612
C7613
G2
C4
F3
J3102
J3103
J3104
I5 J7538 C3
I5 J7539 D3
I5 J7540 D5
R1475
R1486
R1487
F7
E20
E12
R7550
R7551
R7552
F4
C4
F5
System connector
Top
C2231 A5 C7504 C11 C7614 D11 J3105 I5 J7541 D5 R1488 D19 R7554 G3
C2232 C7 C7505 B11 C7615 C9 J3106 I5 J7542 D4 R1489 E13 R7555 B9
C2234 D6 C7507 C10 C7616 F3 J3107 G3 J7543 D5 R1490 E20 R7556 E6