Professional Documents
Culture Documents
Personal Particulars
Age
Date of Birth
Nationality
Gender
IC No.
: 32 years 4 month
: 25th Dec 1983
: Malaysian
: Male
: 831225-08-5445
Marital Status
Mobile No
Email
: Married
: +010 399 9547
: sathia1983_polimas@yahoo.com
Address
Taman Melati,
32040 Seri Manjung,
Perak
Licenses
Education Background
Highest Qualification
Diploma
Field of Study
Institute/University
CGPA
Graduation Date
Field of Study
Institute/University
CGPA
Completed Year
: Engineering (Mechanical)
: Polytechnic Sultan Abdul Halim Muadzam Shah, Jitra, Kedah.
: 3.09
: Dec 2006
Attended Courses
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
: Working at Height
: Zero Accident Plus (ZAP)
: First Aid Training
: SapuraKencana Petroleum Berhad (SKPB)
: 2014
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
Field of Study
Institute/University
Year
Latest Employment
Experience
1. On-Site RF Flange Machining ASME16.5 and ASME 16.47 on Spectacle Blinds, Blind
Flange, Spools, Valves and Pressure Vessel Mechanical Nozzles ( 2 To 60)
2. Lead RF Flange Machining technician team
3. Promote best practice to industry standards suited to project.
4. Coaching and mentoring of project personnel.
5. Assist Hydratight Joint Integrity Engineers/Inspectors-:
i. Line walking/Punching.
ii. Drawing correction/updating (as built).
iii. Marking up drawings (independent I.D) carry over work.
iv. Work pack/Test pack creation.
v. Detailed technical report writing.
vi. Inspection of joints, fault finding.
6. Prepare weekly reports of the total dial inch machining, machine spare part and preventive
maintenance reports
7. Prepare daily reports of work progress and man power utilization.
i- Eliminates downtime
ii- Improves safety
iii- Increases productivity
iv- Ensures a leak free start-up
v- Saves Cost
8. Co-ordinate with the sub-contractors (RWNA Engineering) to achieve the targets and
schedule set by the planning.
9. Issue the work permits ensuring SHE requirements.
10. Conduct safety walk through in the site in co-ordination with the safety department on weekly
basis.
11. Supervision of all flange works and ensures safety and quality standard of the client (Bachtel)
12. Knowledge in internal yearly audits activities and recorded audit results.
13. Preventive Maintenance on all RF Flange machines as a Hydratight Quickface,
Mirage 610i, Mirage 1000i and Mirage 1500i
14. Verify the isometric drawing received from the clients and to identify the pipe lines and carry
out the inspection work.
15. Ordered spare parts for machines and material as a tool bit, inserts, bearing and measuring
equipment at local and overseas supplier.
Project
Position Title
Specialization
Industry
Duration
Experience
1. Gathering of data and specification for all Mechanical equipment for Pre-Commissioned
System for inspections and test reports.
2. Plan and execute Hydrotest of Pipelines, Leakage Test of Pipeline, Flushing and Cleaning of
Pipeline and System dry-out.
3. Assist the Commissioning Engineer in Performing Preliminary Check, Functional Check,
Operational Test & Pre Startup activities.
4. Performed Preventive Maintenance and servicing on Mechanical components, Hydraulic and
Pneumatic machinery, Centrifugal and Diaphragm Pump, Belt Conveyor, Chiller, Air
Compressor and Dryer components
5. Knowledge in hand on experience in Equipment Maintenance, Equipment Operation,
Standards, Procedures and Rules of Operation, Reading Technical Drawing.
6. Perform daily corrective and planned maintenance repairs.
7. Ensure that repairs and installation of new equipment complies with agency policy, safety
procedures and local codes and regulations.
8. Use precision tools such as Micrometers, Dial Indicators, RPM Indicators, Infrared Test
Equipment and Ultrasonic thickness meters.
9. Direct the work of Senior Manager T&C.
10. Tested and calibrated newly installed and pre-existing mechanical equipment.
11. Processed orders for replacement parts and services.
12. Utilized computer-based systems for inventory control and maintenance planning.
13. Provided hands on industrial maintenance and training as required.
14. Execute mechanical commissioning activities and guide Technician during work execution.
15. Monitor and maintain rotating equipment in healthy condition (vibration, lubrication level,
mechanical seal, gland packing, bearings,etc.)
16. Prepare rotating equipment for first start-up and ensure readiness for operation (removal of
shipping locks, lubricating oil, alignment, packing installation, greasing, strainers installation,
etc.)
17. Guided in preservation and maintenance of rotating equipment after equipment
commissioning and start-up.
Experience
1. Daily monitors and checks the Pneumatics & Hydraulic Components
2. Servicing machineries line and maintaining the same for a smooth working
environment
3. Assisting the superiors in setting of production layout in clean room.
4. To report to the Manager on and off a time sequence.
5. Handled troubleshooting and process improvement
6. Knowledge in servicing Hydraulic, Pneumatic, Munter, Chiller & Boiler components
7. Able to Oxy cutting, PVC and ARC welding.
8. Knows the properties, generation, distribution & treatment of air compressor
9. Perform equipment set-up and maintenance, improvement on equipment utilization and
Troubleshooting on machines.
10. Carry out improvement activities, buy off of new equipment, modification, qualification of
machine parts and improve on machine uptime.
11. Assist engineer to work on cost down projects and yield/quality improvement activities.
12. Improvement activities particularly at Assembly / Test Operations.
13. Support 12-hours shifts
14. Maintain the factory building and its surrounding premises.
15. Upkeep and upgrading facilities equipment and services.
16. Handle daily monitoring, maintenance and repair of mechanical system including air
conditioning, chilled water system, process cooling water, chemical supply system and etc.
17. Maintain operation of all equipment located in the boiler house; boilers, DA filters, plant
water pre-treatment and post treatment, reverse osmosis system, water softener, pumps,
and related equipment.
18. Maintain operation of the cooling towers/pump houses, and related equipment.
19. Test and maintain proper water chemistry throughout the affected areas.
20. Perform and record the safety checks required for safe and efficient operation.
21. Maintain a log that chronicles the day-to-day happenings in the affected areas.
22. Knowledge the plants steam distribution and condensate returning system to enable you
to troubleshoot problems in the system.
23. Develop and maintain a working relationship with chemical representatives to ensure
resource for treatment issues that may arise.
24. Maintain housekeeping in areas in and around the boiler houses, pump houses, and
sanitary/storm ditches.
Position Title
Specialization
Industry
Duration
Experience
Top Skills
(Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic
functionalities; Beginner - Just started using or learning the skill)
Skill
Years
Proficiency
Windows XP
>3
Intermediate
MS Office
>2
Intermediate
can manage new machine,
>2
Advanced
knowledge in Auto machine
Languages
(Proficiency: 0=Poor - 10=Excellent)
Language
Malay
English
Tamil
Spoken
8
8
9
Written
8
8
9
Resume
Responsible position, which will be fully utilized of my proven experience and interpersonal
Skills.
Ideal situations will allow advancement based upon individual merit and ability.
Computer Proficiency
Hands on experience in dealing in MS Office 95/98/2000/XP Professional, AutoCad.
Interpersonal Skills
1. Resourceful and able to handle varying workload independently and under pressure from
time to time.
2. Process leadership quality and strong team player with excellent organizational,
interpersonal skills.
3. Confident, mature and able to communicate effectively and courteously with people at all
levels, both internally and externally.
4. The awareness of ISO requirement.
5. Able to travel / working in outstation.
6. Able to work on shif and long hours.
References
Mr.Steven Teo
(Senior Flange Management Engineer)
Hydratight Pte Ltd
83, Joo Koon Circle,
Unit #01-03,
629109 Singapore