Professional Documents
Culture Documents
9) Brinelling means
1. Eye bolt
2. Jo bolt
2.
3. Spot welding
4. Special welding
2. NATIONAL
4. NATIONAL
1. Alpha
2. Beta
3. Combined
4. None
2. Stainless steel
3. Chrome Vanadium
4. None
13) MTCS
1. Flux cannot be used for welding Carbon steel
4. All
6) AN 320.10 Indicates
1. 5/8 diameter
2. 5/16 diameter
3. 3/8 diameter
4. 5/32 diameter
1. Malleability
2. Ductility
15) Hardness is
1. Ability of metal to resist abrasion, penetration,
cutting action
2. Tension loads
4. None
2. Eye bolt
3. 30 Bolt
4. Hex-Head bolt
1|Page
www.dgcaquestionpapers.blogspot.com----------www.easaquestionpapers.blogspot.com
1. Lock washer
Special washer
1. Brinell
2. Rockwell
3. Barcoal
2. Shake-proof washer
4. Any one of the above
3.
2. Below
2. Unplated CRS
4. ATA
3.
2. Class 2 fit
3. Class 4 fit
4. None
4. None of the
3. Cotter pin
22) MTCS
1. Screws are tightened using their heads
Screws are pointed at threaded position
2.
2|Page
2. Due to metal-
4. Any position
31) How the corrosion is removed from Magnesium
alloys
www.dgcaquestionpapers.blogspot.com----------www.easaquestionpapers.blogspot.com
2. Soft brass
4. Non-
1. Parallel
2. Series
3. Either series or parallel
4. Between loop and source
3. Boroscope
4. Both 1 &
3. Stitch line
2. Decrease the
2. 118
3. 59
4. 90
2. CdOH,
4. CdOH,
3|Page
4. All
www.dgcaquestionpapers.blogspot.com----------www.easaquestionpapers.blogspot.com
2. 1159MHZ
3. 11.59GHZ
1. Constant
Varying
2. Class-B
2. Flutuating
3. Sinusoidal
4.
3. Class-C
1. Has high inductive reactance and it allow us to use
of all small motors & equipments
3.
1. Voltage regulator
2. Converts AC to DC
3. Converts DC to AC
1. 254
4.164
4|Page
2. 181
3. 264
www.dgcaquestionpapers.blogspot.com----------www.easaquestionpapers.blogspot.com
3. Length of material
above
2. Chamas
4. Any
1. Increase in flux
2. Increase in brush-drop
3. Increase in windings
4. All the above
4. All the
1. Voltage drop
Contact voltage
1. Angular bearing
2. Thrust bearing
Roller bearing
4. Ball bearing
3.
2. Voltage rating
4. None
3.
3. Both
1. Voltage applied
of material
3. Density of material
5|Page
2. EPRAM
4. ERAM
3.
1. EPROM
EROM
2.
www.dgcaquestionpapers.blogspot.com----------www.easaquestionpapers.blogspot.com
4. None
75) Magnetic Brake Applied in generator
1. Centrifugal brake
by spring & released by magnet
2. Friction brake
83) Solid shank rivet is identified by
1. Shape
3. Size of shank
1. Compression load
2. Tension load
3. Shear load
4. Torsion load
1. 100001
3. 111000
2. Diameter
4. All the above
2. 110001
4. 101010
2. Voltage regulation
4. None
2. Boolean algebra
4. None
3.
2. Electric current
4. None
2. 4; 4; Series
4. 4; 4; Parallel
6|Page
www.dgcaquestionpapers.blogspot.com----------www.easaquestionpapers.blogspot.com