Professional Documents
Culture Documents
Prepared By:
Reviewed By:
Approved by:
Name
Elmer Vercida
Maricel L. Lobis
Lee Ka King
Designation
QC Inspector
Operations Manager
Managing Director
Date
15.12.2015
23.12.2015
29.12.2015
Signature
Doc. ID No.
BMI-WI-5711-02
DATE
01.01.2016
REVISION
1
PAGE
1 OF 2
PURPOSE
The purpose of this instruction is to have guidelines for Lathe Machine Operation.
SCOPE
This procedure applies to Lathe Machine Operation.
RESPONSIBILITY
3.1
Plant Manager
Oversee the production process on lathe Machine operation.
3.2.
Production Manager
Monitor the activities of Lathe Machining works.
3.3.
Operator
Operator shall be responsible that the machine is in good running condition.
4.
SAFETY MEASURES
4.1
Do not use the machine unless you are authorized or have been instructed in its use
and operation.
4.2
4.3.
5.
PRE-OPERATION
5.1
5.2
5.3
Ensure that lathe bed is free from swarf, tooling required to be laid out for easy
reach.
5.4
Page 1
Doc. ID No.
BMI-WI-5711-02
DATE
01.01.2016
REVISION
1
PAGE
2 OF 2
6. OPERATIONAL SAFETY
6.1
6.3
6.4
Ensure to use sharp tools and cutting fluids (where possible) to reduce friction and
cutting forces.
7.
6.5
Use the correct cutting speed for tool type and material.
6.6
Use swarf hook to remove excess swarf from moving work piece.
6.7
HOUSEKEEPING
7.1
Switch off the machine and reset all guards to a fully closed position.
7.2
7.3
REVISION HISTORY
Rev
Date
By
Reviewed
21.07.2014
Approved
Description
WI 1st establishes
Change
15.12.2015
to
latest
format.
Elmer
Maricel L.
Vercida
Lobis
Page 2