Professional Documents
Culture Documents
Brisbane Office
Project
Riverpoint Apartments
Subject
Date:
Job No:
Q275 84
12-Dec-07
Sheet No:
DBT
By:
Brisbane Office
Project:
Riverpoint Apartments
Subject:
Date:
Job No.:
Q275 84
12-Dec-07
Sheet No.:
By:
DBT
Title :
General Description :
Calculates reinforcement requirements for a singly reinforced rectangular concrete beam or slab in flexure.
Calculates the ultimate moment bending capacity of the section for a given steel arrangement (1 or 2 layers of tension
reinforcement).
Considers all minimum reinforcement and spacing requirements to AS3600.
The spreadsheet is particularly applicable to slabs where minimum reinforcement requirements may govern.
Limitations :
Codes / Theoretical Basis : AS3600 - 2001 (Incorporating Amendment 1, 2002 and Amendment 2, 2004)
Warner, Rangan, Hall & Faulkes, 'Concrete Structures', Longman, Melbourne, 1999
Nomenclature :
Input :
Output :
Feedback :
Author :
Office :
Brisbane
Date :
8-Jun-04
Verifier :
Andrew Whiting
Office :
Brisbane
Date :
7-Nov-04
Checker :
Jim Durack
Office :
Brisbane
Date :
10-Nov-05
Disclaimer: This spreadsheet has been formally verified prior to uploading on CW-Online, however, the person using this spreadsheet is responsible for its use.
Client
Brisbane Office
Project
Riverpoint Apartments
Subject
Date:
Job No:
Q275 84
12-Dec-07
Sheet No:
DBT
By:
Material Properties
Width, b
2,400 mm
Depth, D
650 mm
35 mm
35 mm
d2 d1
D
Applied actions
Ultimate strength moment, M*
Service moment for (G + Q) M
32 MPa
2,400 kg/m3
f sy
500 MPa
20 mm
Lig diameter
12 mm
2000.0 kNm
s.1
0.8
f'c
500.0 kNm
500.0 kNm
Ast required for M* < Mu
Ast.required
9769 mm2
32 mm
Spacer
50 mm
Lower
32 mm
Suggested bar numbers & sizes for limit state requirement M* < Mu
Number of bars
18.00
Bar size
No. of bars
12
16
20
24
28
32
36
40
86.5
48.8
31.1
21.7
15.9
12.2
9.6
7.8
22.0
Ast.provided
32,160 mm2
davg
550 mm
Percentage
Ast.required
9769 mm2
Mu 5459.2 kNm
ku
M* < Mu OK
273%
ku < 0.4 OK
242%
1168%
1216%
966%
0.166
Ast.min
2754 mm2
Check that yield does not occur at the serviceability moment assessed using unity load factors (Cl 8.6.1(d))
fscr.1 = M*s.1 y / I cr
33 MPa
Check crack control as measured by the steel stress for short term serviceability moment (G+ sQ) (Cl 8.6.1(d))
fscr = M*s y / I cr
33 MPa
OK
Check clear spacing and compare to 'normal' constructibility limits 2.5 x nominal aggregate size and bar diameter
Clear spacing, s
Check the proposed reinforcement meet all AS3600 requirements
103 mm
206%
YES
Disclaimer: This spreadsheet has been formally verified prior to uploading on CW-Online, however, the person using this spreadsheet is responsible for its use.
Client
Brisbane Office
Project
Riverpoint Apartments
Subject
Date:
Job No:
Q275 84
12-Dec-07
Sheet No:
DBT
By:
Calculations
Preliminary calculations (Cl 6.1 & 8.1)
f cm =
1.1 f'c + 4
39 MPa
E cj =
31,654 MPa
Es / E c
f'cf =
0.82
b D2 / 6
169.0E+6 mm3
n=
Z gross =
6.3
3 MPa
limits 0.65 - 0.85
d1=
505 mm
d2=
587 mm
A st 2 17,688 mm2
550 mm
A st 1 14,472 mm2
9,769 mm2
2,754 mm2
103 mm
1.2 f sy / f'c
Minimum strength requirements (Cl 8.1.4.1)
Deemed to comply A st.min =
21
- 173 x ln ( d b ) + 760
160 MPa
Table 8.6.1(B) f s =
318 MPa
0.5 b d n2
n A st ( d - d n )
dn
b d n3
WRHF eq 5.22
+ n A st ( d - d n )2
max
318 MPa
232 mm
30.54E+9 mm4
33 MPa
318 MPa
33 MPa
400 MPa
Ms* n y
I cr
Limit = max of table A, B
M s.1* n y
I cr
Limit = 0.8 f
sy
dn
ku
. k u d
300 mm
0.545
Reinforcement ratio
Area of steel
Mu
p
A st
5492.1 kNm
0.021
32160 mm2
246 mm
Disclaimer: This spreadsheet has been formally verified prior to uploading on CW-Online, however, the person using this spreadsheet is responsible for its use.
Client
Brisbane Office
Project
Riverpoint Apartments
Subject
Date:
Job No:
Q275 84
12-Dec-07
Sheet No:
By:
DBT