the maximum radial projection shall separate adjacent imperfections.
DIFFERENCE = RP RP
RP
HALF OF SERRATION Imperfections less than half the depth of the serrations shall not be considered cause for rejection.
SURFACE IMPERFECTIONS BOTTOM OF SERRATION
ACTUAL SAMPLE OF SURFACE IMPERFECTION DEEPER THAN THE
BOTTOM OF SERRATION
FLANGE SIZE = 4 DIA.
DIMENSIONAL CHECKING OUTER RADIUS: B = 69.00 mm INNER RADIUS: C = 67.50 mm RADIAL PROJECTION: A = 1.5 mm (OUTER RADIUS MINUS INNER RADIUS) RESULT - ACCEPTABLE