Professional Documents
Culture Documents
March 2010
PIP PNSMV005
Carbon Steel Check Valve Descriptions
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at
Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and
Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not
permitted within any PIP Practice without the express written authorization of PIP. Authorized Users
may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of
PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the
Practice solely for Authorized Users purposes. These purposes include but are not limited to the
procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for
proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific
project by Authorized Users client. PIPs copyright notices must be clearly indicated and
unequivocally incorporated in documents where an Authorized User desires to provide any third party
with copies of the Practice.
PRINTING HISTORY
October 1995 Issued
February 1997 Revision
June 1998
Revision
February 1999
May 2000
April 2001
Complete Revision
Revision
Revision
November 2003
November 2005
March 2010
Technical Revision
Technical Revision
Complete Revision
COMPLETE REVISION
March 2010
PIP PNSMV005
Carbon Steel Check Valve Descriptions
Table of Contents
1. Introduction ................................. 2
4. Notes ........................................... 2
2. References ................................... 2
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Page 1 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
1.
March 2010
Introduction
1.1
Purpose
This Practice provides requirements for suppliers providing carbon steel check valves
included in PIP Piping Line Class Material Specifications.
1.2
Scope
This Practice describes the requirements for carbon steel check valves.
2.
References
Applicable parts of the following Practice shall be considered an integral part of this Practice.
The edition in effect on the date of contract award shall be used, except as otherwise noted.
Short titles will be used herein where appropriate.
2.1
3.
4.
For a full explanation of the format used to structure the valve numbers listed within
this Practice, refer to PIP PNCM0004.
3.2
This Practice provides descriptions for three types of check valves: dual plate, lift,
swing. Therefore, the first two characters in the valve numbers are CD (dual plate),
CL (lift), and CS (swing).
3.3
The valves listed in Section 5 and Section 6 of this Practice are sorted by the unique
valve number designation in ascending alphanumeric sequence (e.g., CD01CA500,
CL03CB500, CS03CA500).
Notes
4.1
Occasionally, valve size ranges listed in this Practice are broader than the size ranges
shown for the same valves on a piping line class material specification. While the
most common practice has been used to specify valve size ranges on line class
specifications, a purchaser may need to utilize a valve in a size outside this common
practice choice. Thus, for reference purposes, the full size range for which a given
valve is typically manufactured is shown in this Practice.
4.2
Requirements for accessories (e.g., dampeners, dash pots, slam retarders, power
assists) for swing check valves will not be specified in piping line specifications or
valve descriptions. Purchasers shall define the requirements for such accessories in
their specifications.
Page 2 of 23
--`,,``,,`,,`,,,,,
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
5.
Cross Reference
Valve Number
CD01CA500
CD01CA700
CD01CA701
CD01CA702
CD01CB500
CD01CB700
CD01CB701
CD01CB702
CD03CA500
CD03CA700
CD03CA701
CD03CA702
CD03CB500
CD03CB700
CD03CB701
CD03CB702
CD06CA500
CD06CA700
CD06CA701
CD06CA702
CD06CB500
CD06CB700
CD06CB701
CD06CB702
CD09CB500
CD09CB700
CD09CB701
CD15CB700
CD15CB701
CL01CB500
CL03CB500
CL06CB500
CL08CA300
CL08CB300
CL08CB301
CL15CB300
CL15CB301
CS01CA500
Page 3 of 23
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
CS01CA501
CS01CB500
1CA1S01
1CB1B01, 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01,
1SA0B01
CS01CB501
CS01CB550
CS03CA500
CS03CA501
CS03CB500
CS03CB501
CS03CB550
CS06CA500
CS06CA501
CS06CB500
CS06CB501
CS06CB800
CS06CB801
CS09CB500
CS09CB800
CS15CB500
CS15CB800
6.
March 2010
Valve Descriptions
Page 4 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
API 594
ASME B16.5
ASME B16.34
API 598
API 594
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
March 2010
PIP PNSMV005
Carbon Steel Check Valve Descriptions
--`,,``,,`,,`,,,,,``,``,``,```,
Page 5 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
API 594
ASME B16.5
ASME B16.34
API 598
API 594
API 594
ASME B16.5
ASME B16.34
API 598
API 594
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
API 594
ASME B16.47 SERIES B
ASME B16.34
API 598
API 594
Page 6 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Valve Size:.......................
Class:............................
Ends:.............................
Body:.............................
Trim:.............................
Closure Member:...................
Seat:.............................
Hinge Pin:........................
Springs:..........................
Stop Pin:.........................
Design Type:......................
Page 7 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Page 8 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
Page 9 of 23
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Page 10 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Page 11 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
Hinge Pin:........................
Springs:..........................
Stop Pin:.........................
Design Type:......................
Body Type:........................
Installation:.....................
410 SS
INCONEL X
410 SS
DUAL PLATE
WAFER
HORIZONTAL - HINGE PIN VERTICAL or VERTICAL - UPWARD FLOW
API 594
ASME B16.47 SERIES B
ASME B16.34
API 598
API 594
Page 12 of 23
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Body:.............................
Cover/Bonnet:.....................
Hard Facing:......................
Closure Member:...................
Springs:..........................
Design Type:......................
Body Type:........................
Installation:.....................
The standards are:
INCONEL X
DUAL PLATE
WAFER
HORIZONTAL - HINGE PIN VERTICAL or VERTICAL - UPWARD FLOW
DESIGN
ENDS
RATING
TESTING
DIMENSIONAL
API 594
ASME B16.5
ASME B16.34
API 598
API 594
API 594
ASME B16.5
ASME B16.34
API 598
API 594
API 594
ASME B16.5
ASME B16.34
API 598
API 594
Page 13 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
API 594
ASME B16.5
ASME B16.34
API 598
API 594
API 602
ASME B16.5
API 602
ASME B16.10
API 602
ASME B16.5
API 602
ASME B16.10
Page 14 of 23
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
Design Type:......................
Cover/Bonnet Type:................
Body-Bonnet Gaskets:..............
Body-Bonnet Bolting:..............
PISTON
BOLTED
API 602
BOLTS: ASTM A193 - B7
NUTS: ASTM A194 - 2H
Installation:..................... HORIZONTAL - COVER UP
The standards are:
DESIGN
ENDS
RATING
DIMENSIONAL
API 602
ASME B16.5
API 602
ASME B16.10
API 602
ASME B16.11
API 602
MFG STD
HALF
PISTON
BOLTED
API 602
BOLTS: ASTM A193 - B7
NUTS: ASTM A194 - 2H
Installation:..................... HORIZONTAL - COVER UP
The standards are:
DESIGN
ENDS
RATING
DIMENSIONAL
API 602
ASME B16.11
API 602
MFG STD
Page 15 of 23
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
API 602
ASME B16.11
API 602
MFG STD
API 602
ASME B16.11
ASME B16.34
API 598
MFG STD
FULL
PISTON
BOLTED
API 602
BOLTS: ASTM A193 - B7
NUTS: ASTM A194 - 2H
Installation:..................... HORIZONTAL - COVER UP
The standards are:
DESIGN
ENDS
RATING
DIMENSIONAL
Page 16 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
API 602
ASME B16.11
API 602
MFG STD
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Design Type:......................
Cover/Bonnet Type:................
Body-Bonnet Gaskets:..............
Body-Bonnet Bolting:..............
SWING
BOLTED
API 600
BOLTS: ASTM A193 - B7
NUTS: ASTM A194 - 2H
Installation:..................... HORIZONTAL - COVER UP or VERTICAL - UPWARD FLOW
The standards are:
DESIGN
ENDS
RATING
TESTING
DIMENSIONAL
Page 17 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
DESIGN
ENDS
RATING
TESTING
DIMENSIONAL
Page 18 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Page 19 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
ASME B16.34
ASME B16.5
ASME B16.34
API 598
ASME B16.10
Page 20 of 23
--`,,``,,`,,`,,,,,`
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
DESIGN
ENDS
RATING
TESTING
DIMENSIONAL
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
Page 21 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
Page 22 of 23
Copyright Process Industry Practices
Provided by IHS under license with PIP
No reproduction or networking permitted without license from IHS
ASME B16.34
ASME B16.25
ASME B16.34
API 598
ASME B16.10 (NPS 3 -to- NPS 16)
MFG STD (NPS 18 -to- NPS 24)
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
COMPLETE REVISION
PIP PNSMV005
Carbon Steel Check Valve Descriptions
March 2010
Design Type:......................
Cover/Bonnet Type:................
Body-Bonnet Gaskets:..............
Body-Bonnet Bolting:..............
SWING
BOLTED
API 600
BOLTS: ASTM A193 - B7
NUTS: ASTM A194 - 2H
Installation:..................... HORIZONTAL - COVER UP or VERTICAL - UPWARD FLOW
The standards are:
DESIGN
ENDS
RATING
TESTING
DIMENSIONAL
--`,,``,,`,,`,,,,,``,``,``,```,`-`-`,,`,,`,`,,`---
ASME B16.34
ASME B16.25
ASME B16.34
API 598
ASME B16.10 (NPS 3 -to- NPS 16)
MFG STD (NPS 18 -to- NPS 24)
Page 23 of 23
Licensee=Jacobs ASTM & PIP Only/3219500105
Not for Resale, 06/25/2012 13:29:27 MDT