You are on page 1of 2
DGCA PAPER 2 OCT. 2013 1. Trickle charging in lead acid battery a. prevent sulphation —_b. for fresh & fully charge maintain electrolyte 2. High pass filter allow to pass a Cartierfrequency —_—b. Audio frequency b, Steadytodclevel d. ATA 3. Refueling of the a/c from stored can & barrel must be run with A. Plasticfuel strainer _b. chamois’s & non conductive strai « Chamois & metal screen 4. anynon con 4. Higher resistivity in which material a. lead b.copper —c. aluminum Rete 5. power factor in R-C circuit (ol i tMiner ao b.between 0&1 —c. by d. unity 6. Before fuelling using pressure fuel ‘Truck pump pressure must. ct Bathe tank b. Truck pump pr. Equal to ce 7. RF frequency range a, One band HF 3-30mhz b. Two band HF & c. Three band Me, VHF d. Four bi ,MF,VHF,UHF 8. Vol id current gain is 50 calculate power gain 10000mA, ¢.10000uA —d. 10000 a «ss len algebra indicate pee kA AWB axe 10. Oscillator circuit used in a. tve feedback b.-vefeedback _«. zero feedback 11, NAND gate input connected together the circuit is, a. OR 8. AND c. NOT d. NAND b. 12. In digital circuit NAND GATE a. OR b.NOT «.NAND, 13. During forming process of al. alloy making repair (15A pg.144) a. Hammers and mallet c.rotary machine used © 14. Bend allowance is (15A pg-146) a. Thickness of material to bend c.length required to bend b. Radius of material to bend 15, 20000 0/v a Sma -b.20mA_— sc. 50mA—

You might also like