Professional Documents
Culture Documents
Department:
Document:
Document Code:
Revision:
1
Gerencia de Proyectos
Standard Specification For Pipe, Valves & Fittings
43B011-CPT-50-SP-004
Date:
04-Nov-2014
Prepared by:
E.Santilln
Reviewed by:
C. Gudio
Approved by:
R. Silva
Revision History
Revision:
A
B
0
Date:
29-Sep-2014
29-Oct-2014
31-Oct-2014
04-Nov-2014
Revised Pages:
All
All
All
45,48,82-84,87-88
101-105,129,186-187
Issued:
For Review
For HAZOP
Final Basic Engineering
Final Basic Engineering
APROBADO
INGENIERA BSICA
ELABORADO POR: EDWIN OQUENDO
APROBADO POR PAM EP: CARLOS GUDIO
FECHA: 04/11//2014
FECHA: 04/11/2014
Distribution Control
Location of Document:
Project Management
Departmental Assistants and Coordinators
Electronic Information System
Controlled
Uncontrolled
X
X
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
2 of 196
Index
SCOPE
GENERAL REQUIREMENTS
3.1
Pipe
3.2
Flanges
3.3
Fittings
3.4
Valves
3.5
3.6
Pipeline valves
10
3.7
Operators
10
MATERIALS
11
PIPE SUPPORTS
12
WELDING
13
INSPECTION
13
PRESSURE TESTING
13
13
10
THERMAL INSULATION
13
11
INSULATING GASKETS/KITS
14
12
14
13
14
15
16
12.4 Description
16
17
BRANCH CONNECTIONS
13.1 Split tees
14
SPECIFICATIONS LIST
15
ANNEXES
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
18
19
19
153
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
3 of 196
SCOPE
This specification defines the minimum requirements for pipe, valves, and fittings on process and
utility piping systems. This specification includes materials, fabrication, welding, inspection, and
testing and shall apply to all piping installed by or prefabricated for installation by Contractor or to
Contractors order for use on the PETROAMAZONAS EP onshore production facilities as part of
the development of 43 Block in the oriental rain forest zone of Ecuador.
Piping shall be designed, constructed, and tested in accordance with the latest edition of
ASME B31.3, "PROCESS PIPING" or ASME B31.4 PIPELINE TRANSPORTATION
SYSTEMS FOR LIQUIDS AND SLURRIES, whichever applicable, and this specification.
Steam line and Power Generation Systems must be designed, built, and tested according to
the latest edition of ASME B31.1.
The following standards (the latest edition) shall apply during preparation of all piping
drawings and during description of materials for Class 150 through Class 2500:
Standard/Code Description
Standard/Code
API RP 591
API Spec 5L
API Spec 6D
ASME B1.1
ASME B1.20.1
API Spec Q1
API Std 594
API Std 598
API Std 600
API Std 602
API Std 607
API Std 608
API Std 609
API Std 622
ASME B16.1
ASME B16.5
ASME B16.9
ASME B16.10
ASME B16.11
ASME B16.20
ASME B16.21
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
4 of 196
Standard/Code Description
Standard/Code
Buttwelding Ends
Valves Flanged, Threaded and Welding End
ASME B16.25
ASME B16.34
Orifice Flanges
Large Diameter Steel Flanges: NPS 26 Through NPS 60
Square and Hex Bolts and Screws - Inch Series
Square and Hex Nuts (Inch Series)
Power Generation Systems
Process Piping
ASME B16.36
ASME B16.47
ASME B18.2.1
ASME B18.2.2
ASME B31.1
ASME B31.3
ASME B31.4
ASME B36.10
ASME B36.19
MSS SP-95
MSS SP-25
MSS SP-75
MSS SP-80
MSS SP-83
MSS SP-97
MSS SP-105
The following procedures (the latest edition) shall apply during preparation of all piping
drawings and during description of materials for Class 150 through Class 2500:
Approved WPS
Structural Steel Skid Mounted Assemblies
Technical Specification for Thermal Insulation
Manufacture And Installation of Pipes Underground and
Aboveground
Hydrostatic Test For Process Pipe
Coating Specification
ISO 15848
B15-ECU-50-PR-023
B15-ECU-20-SP-009
43B011-CPT-20-SP-015
PAM-EC-20-PRC-005
PAM-EC-20-PRC-007
PAM-EC-50-SP-001
GENERAL REQUIREMENTS
Engineering drawings, where provided, indicate the minimum line size, design working
pressure or piping class, valves required, etc.
For services of transportation crude oil and water reinjection, the engineering companies
must confirm the wall thickness with the Hydraulic Calculations of lines.
The maximum design conditions specified in the Piping Class Specifications Note 1 are
separate requirements and neither shall be exceeded.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
5 of 196
PETROAMAZONAS EP.
Line marking and identification of valves shall be in accordance with Section 12 herein.
Contractors standard markings and identification may be used with the written approval of
PETROAMAZONAS EP.
3.1 Pipe
All pipes shall be marked per API Spec 5L, ASTM A-53 or ASTM A-106: name or
manufacturers marking, specification, specified dimensions, grade and class,
product specification level, process of manufacture, heat number and an
identification number.
Piping Class 150 through Class 2500. Piping 1 NPS and smaller may be
threaded, flanged or socket welded as indicated by the Piping System
Specifications. Piping 2 NPS and larger may be threaded (Only for Specs J and
L), butt welded or flanged as indicated by the Piping System Specifications.
When socket weld piping is used, unions will be installed at accessible locations to
permit removal and replacement of all valves and equipment. With the exception
of vents, drains, samplers and instrument connections, piping 1 NPS and
smaller shall be socket welded or flanged for the following services:
Piping systems shall be designed so that all valves and instruments can be
serviced conveniently. When this is impractical, ladders and platforms designed in
accordance with PAM EP Specification B15-ECU-20-SP-009 "STRUCTURAL
STEEL SKID MOUNTED ASSEMBLIES, shall be used.
Emergency shutdown valves shall be accessible from deck or floor level and are
to be located in clear areas.
All carbon steel pipe nipples NPS and smaller shall be a minimum of SCH 160
SMLS steel pipe. "All-Thread" nipples shall not be used. A nipple shall be defined
as any section of pipe 12 or less in length.
PTFE (Teflon) tape shall not be used for service temperature greater than 400F
(204C) on threaded connections, for higher temperatures socket welded
connections are preferred.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
6 of 196
line flow area with 1/8 diameter maximum size perforations. For Strainers
Specifications, see ANNEX No. 1.
Drain connections and valves shall be provided at all low points in lines. Also, vent
connections and valves shall be provided at all high points where gas may be
trapped. Vent, drain and instrument connections and smaller may be installed
using 3000# or 6000# threadolets, except for high temperature or other service
where sockolets are specified by the Piping System Specifications.
Changes in pressure rating of piping systems shall be made at valves. This valve
shall carry the rating of the higher pressure system.
Laterals (sub-headers) for instrument gas or air systems shall have block valves
at the primary header and branch off from the top of the primary header.
Flow lines piping, between wellhead and manifold, shall be externally coated with
FBE (fusion bonded epoxy). For FBE specifications, see ANNEX No. 11.
3.2 Flanges
All flanges shall be marked per ASME B16.5 and/or MSS SP-25: country of
manufacture, manufacturer's name or trademark, material, rating designation,
conformance with the B16.5 Standard, size, schedule (if applicable) and an
identification number.
Flanges Class 900 and above shall be RTJ. Flanges Class 600 and lower may be
RF or FF, with serrated spiral finish.
Steel flanges used to mate with equipment having cast iron, ductile iron or
aluminum flanges shall have the faces machined flat (FF).
Flange bolt holes shall straddle the piping horizontal and vertical center lines.
API flanges rated at 2000, 3000 or 5000 PSI shall be Type 6B. For API Flanges
Description, see ANNEX No. 9.
3.3 Fittings
All fittings shall be marked (if applicable) per ASME B16.9, ASME B16.11 and/or
MSS SP-25: country of manufacture, manufacturer's name or trademark, material,
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
7 of 196
All 90 welded elbows shall be long radius (LR), unless restricted by available
space. If short radius welded elbows are used, they shall be derated to 80% of the
calculated allowable working pressure.
Eccentric reducers installed with the straight (flat) side up shall be used when line
size reductions are required for pump suction connections.
Bleed rings shall be according to material of pipe, stainless steel or carbon steel.
For Bleed Rings Specifications, see ANNEX No. 4.
All welded elbows related to flow lines, between wellhead and manifold, shall be
externally coated with FBE (fusion bonded epoxy). For FBE specifications, see
ANNEX No. 11.
3.4 Valves
Valve materials specified herein are the minimum required by PAM EP. In the case
that there exist the same or better materials with tested performance for the
specific application, their acceptance will be responsibility of the technical
evaluator.
All valves shall be marked per ASME B16.34, API Spec 6D and/or MSS SP-25.
All the valves manufacturers (gate, globe, check and butterfly with exception of API
6D valves) will have to apply the API RP 591: PROCESS VALVE QUALIFICATION
PROCEDURE. This recommended practice provides recommendations for
evaluation of a construction and quality assurance program for the purpose of
determining a manufacturer's capability to provide new valves manufactured in
accordance with the applicable API standards.
Valves shall be furnished as called out on the Approved Valve Lists. Alternate
valves which are equal to the valve list requirement may be used only after
obtaining the written approval of PETROAMAZONAS EP.
All valves shall be installed in accordance with temperature and pressure ratings
recommended by manufacturer and within limits of the ASME B16.34 Code for the
applicable service. Flanges and flange facings on valves shall match that specified
by the applicable Piping Class Specification. The wall thickness of the valves gate,
globe and check shall be under API 600 and API 602.
All valves for hydrocarbon service shall be steel. Valves 2 and larger shall be
flanged and 1 and smaller may be threaded, flanged or socket welded as
indicated by the Piping Class Specification. Contractor shall not add flanges to
threaded, socket weld or butt weld connections on valves unless specifically
approved. Secondary threaded valves must be easily removable.
Valves 3 and smaller: Cast Bronze body and trim. Threaded ends.
Valves 4 and larger: Cast Iron body and Bronze trim. FF flanged ends.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
8 of 196
Ball valves shall be fire safe design and shall meet the following additional
specifications.
Ball valves shall be trunnion mounted with secondary metal seal, as following:
All trunnion mounted ball valves shall be supplied with grease fittings for stem
and seals.
Secondary metal seal is not required for 1 and smaller ball valves.
Manual gear operators shall be furnished on all quarter turn valves in any
application where breakaway torque requirements exceed 50 foot pounds.
Generally:
For Hydrocarbon Process and Instruments Air, ball valves 1 and smaller
shall be ASTM-A351 Gr CF8M or 316 SS body, with 316 SS ball and stem for
piping specfications where the piping material is of similar composition. In
piping specification with Carbon Steel piping, forged carbon steel materials
shall be used.
Block valves shall be provided downstream of check valves to allow isolating the
check valve for servicing without the need to de-pressurize downstream piping
systems. Vent valves, if applicable, shall be installed to facilitate de-pressuring
piping upstream of check valve and upstream of check valve for leak testing of
check valves.
Check valves can be reduced or full flow, swing check in all cases except for
reciprocating pump or compressor service where ball or piston type check shall be
used or where the piping specification permits wafer type check valves in utility
services.
All check valves 2 and larger shall be furnished with bolted bonnets.
All check valves 4 and larger shall be provided with NPT tap and plug in
the body.
Gate, Globe and Check valves shall have hardened (stellite or equal) seats. The
check valve can have removable or integral seats. Globe valves may be straight
or angle type to suit piping configuration.
All gate and globe valves shall be OS&Y (outside screw and yoke). Inside screwrising stem not will be accepted.
Needle valves shall be supplied when shown on the flowsheets and assembly
drawings. Needle valves, except where required for high pressure and/or
temperature service, shall be soft- seated and full 316 SS construction.
For ball valves, the ball rotation shall be counter-clockwise when facing the stem
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
9 of 196
Small steel threaded and socketweld end valves that are accessories to the main
valve shall have a minimum body rating equivalent to API STD 602, Class 800.
All sealant injection fittings shall be one-piece giant buttonhead type with internal
check valve mechanisms, and shall be equipped with safety vent caps.
Buried and inaccessible double- block-and-bleed valves shall have the drain, vent
and sealant injection connections (if applicable) extended above ground in
accordance with the figure 1 and as per the following requirements:
All piping (schedule 80 minimum), valves and fittings shall have corrosion
resistance at least equal to the main valve body material, and shall be SS
316L as a minimum. The entire piping system shall be coated with the same
coating system as the main valve.
Unions are permitted only in the extended lines of in-line repairable valves
(top-entry ball valves and through conduit gate valves) at a suitable location
to facilitate removal of the bonnet.
All piping shall follow the valve contour as closely as possible and shall be
rigidly connected to the valve and stem extension.
Fully and partially buried valves shall be entirely coated with a below grade
coating as specified in PAM EPs specification PAM-EC-50-SP-001 Coating
Specification.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
10 of 196
API SPEC 6D valves (ball & gate) shall be designed to withstand a compressive
axial thrust, exerted by the piping without permanent distortion of the body and
without jamming the gate/ball between the seats. The Vendor shall have
conducted tests on representative samples to demonstrate satisfactory valve
performance under pipeline compression and/or bending loads.
3.7 Operators
Gear boxes shall be dust and weather-proof and filled with a lubricant suitable for
operation up to 80C.
Gear operators for quarter turn valves shall be equipped with a self-locking system.
The maximum (human) operator force required to seat or unseat the valve at the
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
11 of 196
maximum specified differential pressure shall not exceed 360N ( 80 pounds) at the
rim of the hand-wheel.
MATERIALS
All materials (Pipe, Fittings, Flanges, etc.) shall include: country of manufacture,
manufacturer's name and/or logo and heat number and be provided with quality certificates
to enable its traceability.
All materials for Pipe, Valves, Fittings, Flanges, Bolts, Gaskets and Special Parts, shall be
in accordance with Piping Class Specifications.
The quality management system requirements for the design, development, production,
installation and service of products for the petroleum industry, must be prevailed per API
Spec Q1: Specification for Quality Programs for the Petroleum, Petrochemical and Natural
Gas Industry.
All Pipe, Valves, Fittings, Flanges, Bolts, Gaskets and Special Parts, supplied by Contractor
shall be new and unused, free of mill scale, dents, cracks, laminations, pits and detrimental
rust or oxidation.
PETROAMAZONAS EP reserves the right to inspect all Contractor supplied materials and
components, and to reject those deemed unusable for use and not conforming to these
specifications.
No pipe, valves or fittings of brass, aluminum, cast iron, malleable iron, steel-iron or semisteel shall be used in hydrocarbon service. Cast Bronze or Cast Iron body valves will be used
Only for Fire Water Systems and Foot Valves.
Threaded piping shall be sealed using a combination of liquid anaerobic sealant (such as,
but not limited to Loctite 567 or 592) and Teflon tape. Care shall be taken to prevent
extension of the tape into the pipe. Excess tape shall be removed prior to painting.
All new pipe, flanges and fittings shall be marked with mill and material identification. All
pipes shall be accompanied with mill test reports, and flanges and fittings shall be
accompanied with mill material certifications from manufacturer.
All threaded galvanized pipe shall be painted after assembly with cold galvanizing.
The filler material for all gaskets shall be Flexible Graphite (FG) and will only be accepted
from USA and ITALY. For Gaskets Specifications, see ANNEX No. 5.
All welded joints related to flow lines, between wellhead and manifold, shall be coated with
3M Scotchkote 323.
When butt welding end valves are made of carbon steel with a specified minimum yield
strength of 289 MPa (42,000 psi) or higher, the maximum carbon content shall not exceed
0.23% as specified in API SPEC 6D Section 7. For fabricated valves, this limitation applies
only to the ends.
Unless otherwise specified, when hardfacing is required it shall be Stellite No. 6 or equal with
a resultant minimum hardness number of 350 HB.
Electroless nickel plating (ENP) on carbon and low alloy steel substrates shall be applied in
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
12 of 196
accordance with the requirements of ASTM B733, SC4, Type III, Class 3, (carbon steel or
low alloy substrate)/NiP10 75.
Valves Trim materiales shall be selected on the basis of the general recommendations of
this specification and the proper engineering analisys for each application, as reference, a
simplified version of API 600 trim number table is showed in table 1 herein :
BODY SEAT
SURFACE MATERIAL
13 CR
CLOSURE MEMBER
SURFACE MATERIAL
13 CR
SS 304
SS 304
SS 310
SS 310
13 CR Hardened
13 CR Hardened
Stellite 6 hardfacing
Stellite 6 hardfacing
NI-CR hardfacing
NI-CR hardfacing
13 CR
CU-NI
13 CR hardened
13 CR
Stellite 6 hardfacing
13 CR
TRIM NO.
5A
8A
NI-CR hardfacing
13 CR
Monel
Monel
10
SS 316
SS 316
11
Monel
12
SS 316
13
Alloy 20
Alloy 20
14
Alloy 20
PIPE SUPPORTS
Welding of supports directly to the internally coated pipe, except shoes using in thermal
insulating pipe, shall not be permitted unless authorized in writing by PETROAMAZONAS
EP.
U-Bolts securing pipe to pipe supports shall be galvanized with 1/16 polyethylene sleeve,
flat washers and double nuts. A 1/8 neoprene or polyethylene pad spacer shall be placed
between the pipe support and bottom of pipe. Minimum U-bolt diameter shall be 1/4". For UBOLTS Dimensions, see ANNEXJ.
Piping 8 and larger and any smaller piping subject to excessive mechanical vibration or line
pressure pulsations (e.g., rotating equipment piping) shall be fastened to substantially rigid
pipe supports with bolted pipe clamps in lieu of U-bolts. Pipe clamp bolts shall have double
nuts.
Piping subject to expansion may be either suspended from adjustable or swivel type hangers
or supported from below. If supported from below, steel slip shoes and guides shall be
provided. Anchors and stops shall be provided to maintain movements and forces within
acceptable limits.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
13 of 196
WELDING
Where potential galvanic corrosion does not exist, standard joints and welds are acceptable.
Socket weld joints are not permitted in location where high vibration can occur (such as high
velocity gas control valves and reciprocating pumps).
The maximum size of socket-welded joints in hazardous services shall be 1-inch for new
construction. Maximum 2-inch may be used in hazardous service for maintenance, minor
field modifications of existing piping systems, and when necessary to match existing
equipment connections.
Contractor shall qualify its own Welding Procedure Specifications and qualification records,
these specifications and records shall be submitted to PAM EP for its review and approval.
Welded joints in carbon steel shall be stress relieved in accordance with ASME B31.3 when
the nominal pipe wall thickness is greater than . The piping shall be brought to temperature
and cooled in accordance with ASME Section VIII, Paragraph UCS-56.
INSPECTION
Inspection of all piping shall be performed in accordance with Procedure PAM-EC-20-PRC-005
MANUFACTURE AND INSTALLATION OF PIPES UNDERGROUND AND ABOVEGROUND. If
the inspection is performed in accordance with Contractor Specifications, these procedures shall
be submitted to PETROAMAZONAS EP for approval.
PRESSURE TESTING
All pressure testing of pipe shall be performed in accordance with ARCH (Agencia de Regulacin
y Control Hidrocarburfero) Regulations and PAM EPs procedure PAM EP-ECU-QAQC-20-PRC009 PRUEBAS DE PRESION EN TUBERIAS DE PROCESOS.
10
Surface preparation and painting of pipe, valves and fittings shall be performed in
accordance with PETROAMAZONAS EP Specification PAM-EC-50-SP-001 "COATING
SPECIFICATION.
All flange surfaces and bolt holes, except for flange facings, shall be coated with primer and
intermediate coats prior to assembly. Pipe fittings shall not be primer coated until all shop
fabrication has been completed. Final paint coating shall be performed after piping has been
fully assembled and hydro-tested.
THERMAL INSULATION
Piping shall be insulated where indicated on the approved for construction AFC drawings. Insulation
shall be applied as specified in PETROAMAZONAS EP Specification: 43B011-CPT-20-SP-015
Technical Specification for Thermal Insulation.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
14 of 196
INSULATING GASKETS/KITS
12
Department:
For dissimilar metals connections; examples: a stainless steel flange to carbon steel flange,
or a Cu-Ni flange to carbon steel flange, the potential for galvanic corrosion shall be
determined.
Where potential galvanic corrosion exists, the types of joints are restricted as follows:
For flanged joints of dissimilar metals, insulating gaskets, stud bolt sleeves and washers
such as PIKOTEK, or approved equal, refer to ANNEX No. 3.
Line Identification
Each line on the mechanical flowsheets and process piping drawings shall be clearly
identified to denote the pipe specification and nominal line size.
Example:
3 - FG - 40501 - A - 00
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
15 of 196
Line Service
Each line will be denoted by the following abbreviations:
ABBREVIATION
SERVICE
CLASSES
AV
Atmospheric Vent
A, A4,
Condensate
A5
CD
Closed Drain
A, A5, C2, D
DF
Diesel Fuel
DP
Potable Water
J, L
FW
Foam
Fuel Gas (Hot or Dry Service and Wet
or Condensate Service)
Firewater
Gas
A4,
GL
Gasoline
A, A4
FG
GW
A4
L
A, F
HF
A4, A5
HO
Hot Oil
A, A4
IA
Instrument Air
JP
Jet Fuel
A, A4,
LF
A4
OD
Open Drain
A, A5
PF
Process Fluids
PG
Produced Gas
A4
PL
BS
PW
Produced Water
A5, F5
UA
Utility Air
UW
Utility Water
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
16 of 196
12.4
Description
1. Valve Type
2. Connection Type
Gate
Flat face
2
3
4
5
6
7
Ball
Plug
Globe
Check
Needle
Butterfly
G
J
R
S
U
W
Grayloc
Ring Joint
Raised face
Threaded
Union
Butt weld
8
9
0
Foot
Gauge, Multiport
Choke (900# - 1500#)
X
Y
Z
Special
SW x SCR
Socket weld (SW)
By opening type
Lug
Piston
Short Pattern
L
P
S
Slab Gate
Wafer
SG
W
Full port
Regular port
F
-
By characteristic
By connection
B
H
LT
Special
Standard
FM x FM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
FM
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
17 of 196
PIPING
SPEC
ANSI RATING
SERVICE IDENTIFICATION
C.A.
[in]
MATERIAL
TYPE
CODE
ANSI 150 RF
1/16
CS
ASMEB31.3
A1
ANSI 150 RF
1/16
CS
ASMEB31.3
A2
ANSI 150 RF
1/16
CS Int Coated
ASMEB31.3
A3
ANSI 150 RF
304 SS
ASMEB31.3
A4
ANSI 150 RF
1/8
CS
ASMEB31.3
A5
ANSI 150 RF
1/8
CS
ASMEB31.3
BS
ANSI 150 RF
304L SS
ASMEB31.3
ANSI 300 RF
1/16
CS
ASMEB31.3
B1
ANSI 300 RF
1/16
CS
ASMEB31.3
B3
ANSI 300 RF
304 SS
ASMEB31.3
B4
ANSI 300 RF
1/8
CS
ASMEB31.3
B5
ANSI 300 RF
1/8
CS
ASMEB31.3
ANSI 300 RF
1/16
CS Int Coated
ASMEB31.3
C1
ANSI 300 RF
1/8
CS
ASMEB31.4
C2
ANSI 300 RF
1/16
CS
ASMEB31.3
ANSI 600 RF
1/16
CS
ASMEB31.3
D1
ANSI 600 RF
1/16
CS Int Coated
ASMEB31.3
D3
ANSI 600 RF
304 SS
ASMEB31.3
D5
ANSI 600 RF
1/8
CS
ASMEB31.4
D6
ANSI 600 RF
1/8
CS
ASMEB31.3
1/16
CS
ASMEB31.3
E3
304 SS
ASMEB31.3
E5
1/16
CS Int Coated
ASMEB31.3
CS
ASMEB31.3
F3
304 SS
ASMEB31.3
F5
1/8
CS
ASMEB31.3
CS Int Coated
ASMEB31.3
CS
ASMEB31.3
H3
304 SS
ASMEB31.3
H4
Produced Gas
304 SS
ASMEB31.3
ANSI 150 RF
CS Galv
ASMEB31.3
ANSI 150 FF
Firewater
1/16
CS
ASMEB31.3
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
18 of 196
BRANCH CONNECTIONS
When branch connections are required in in-service lines, hot tap connections using splittees shall be used, split tees requirements are listed in section 13.1 herein.
For new construction of metallic piping selection shall be made in accordance with the
following Branch Connection Chart:
RT
T
20
18
16
14
12
10
1.5
0.75
0.5
RT
RT
T
RT
RT
RT
T
RT
RT
RT
RT
T
RT
RT
RT
RT
RT
T
W
RT
RT
RT
RT
RT
T
W
W
RT
RT
RT
RT
RT
T
W
W
W
W
RT
RT
RT
RT
T
W
W
W
W
W
W
RT
RT
RT
T
W
W
W
W
W
W
W
W
RT
RT
T
W
W
W
W
W
W
W
W
W
RT
RT
T
W
W
W
W
W
W
W
W
W
W
RT
RT
T
S
S
S
S
S
S
S
S
S
S
S
S
T/S
SWT
S
S
S
S
S
S
S
S
S
S
S
S
S
SW RT
SWT
S
S
S
S
S
S
S
S
S
S
S
S
S
SW RT
SW RT
SWT
S
S
S
S
S
S
S
S
S
S
S
S
S
SW RT
SW RT
SW RT
SWT
LEGEND
T
RT
Weldolet (WOL)
T/S
SWT
SW RT
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
14
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
19 of 196
Split Tees
If the branch size is fifty percent (50%) or more of the run size, then the calculated
wall thickness, including reinforcement, of the split tee run shall be provided in the
entire cross section of the two halves of the run (except for the recess for the
backing strip).
Flanges used for hot tap or stopple fittings shall meet the requirements ofthe
bolting and seating area of ASME B16.5, ASME B16.47, MSS SP-44.
The wall thickness of split tees of the extruded type shall be designed in
accordance with the requirements of either ASME B31.4/ASME B31.8, paragraph
404.3.1(b)/831.4 or ASME B31.3, paragraph 304.3.3.
When approved by a PAM EP representative, split tees with the branch welded to
the run (instead of extruded) are acceptable, provided that the split tee can
withstand the specified hydrostatic test pressure without permanent deformation.
The wall thickness of split tees with a welded branch shall be designed to provide
integral reinforcement of the branch opening as required by either ASME
B31.3/ASME B31.4/ASME B31.8.
SPECIFICATIONS LIST
The following table contains piping, fittings, and valves that shall be used in each piping
specification:
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
20 of 196
SPECIFICATION A
CLASS: ANSI 150#
CS, RF
SIZE
3/4
1 1/2
SCH 160
PIPE
10
SCH 80
12
16
THD
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
150# RF
THD
150# RF/FF, WN
FLANGES
20
24
STD
ASTM-A105
3000#
THD
BW, SMLS
FITTINGS
ASTM-A105
ASTM-A234 GR WPB
3000#
BRANCH
(OLETS)
SCH 80
STD
THD
BW
ASTM-A105
GATE
BALL
A1S
A1R
A2S, A2SF
PLUG
N/A
GLOBE
A4S
CHECK
VALVES
NEEDLE
GASKETS
A5R
N/A
N/A
FOOT
BOLTING
(Note 3)
A4R
A5S
A6S, A6SFM
BUTTERFLY
GAUGE
A2R, A2RF
A7RL, A7RW
N/A
A9S
A8F
N/A
Thread and
dimensions per
ASME B16.5
150# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite
PRESS./TEMP.
(FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style
RATINGS
RW only USA. Carrara Style SWC - only ITALY)
F
PSIG
150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder
REF. ASME B16.5
(Flexitallic, Lamons, Garlock - only USA)
NOTES:
-20/100
285
200
260
250
245
300
400
230
200
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
21 of 196
SPECIFICATION A
TAG
GATE
A1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A1R
2 4
A1R
6 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
A2S
1 and
Smaller
A2SF
1 and
Smaller
A2R
2 6
A2RF
2 6
BALL
SIZE
ACCEPTABLE
BRANDS
TYPE
All
Services
BALL
Standard
Services
DESCRIPTION
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
22 of 196
SPECIFICATION A
TYPE
TAG
SIZE
BALL
A2R
8 and Larger
A2RF
8 and Larger
A2R
2 4
6 12
14 and Larger
2 4
6 12
Standard
Services
BALL
HO
PF
Services
A2RF
ACCEPTABLE
BRANDS
DESCRIPTION
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
23 of 196
SPECIFICATION A
TYPE
GLOBE
CHECK
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
14 and Larger
A4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
A5S
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, HF
Stellite seats,threaded ends per ASME
B1.20.1, horizontal swing, screwed or
bolted cover. Design per API 602. Test per
API 598
AOP
A5R
2 - 3
A5R
4 and Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
24 of 196
SPECIFICATION A
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A6S
1 and Smaller
A6SFM
1 and Smaller
A7RL
3 and Larger
A7RW
3 and Larger
FULL
FLOW
FOOT
A8F
2 and Larger
APCO
Flomatic
Valmatic
GAUGE
A9S
and Smaller
AGCO
AOP
HEX
Swagelok
NEEDLE
BUTTERFLY
AGCO
Balon
KF
NOSHOK
Swagelok
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
Velan
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
25 of 196
SPECIFICATION A1
CLASS: ANSI 150
CS, RF
SIZE
1/2
3/4
SCH 160
PIPE
1 1/2
10
SCH 80
12
16
20
24
STD
THD, SMLS
BE, SMLS
ASTM-A333 GR 6 (Note 2)
150# RF
THD
150# RF, WN
FLANGES
ASTM-A350 GR LF2
3000#
THD
BW, SMLS
FITTINGS
ASTM-A350 GR LF2
3000#
BRANCH
(OLETS)
ASTM-A420 GR WPL6
SCH 80
STD
THD
BW
ASTM-A350 GR LF2
GATE
A1-1SLT
A1-1RLT
BALL
A1-2SLT
A1-2SFLT
A1-2RLT, A1-2RFLT
VALVES
PLUG
N/A
GLOBE
CHECK
NEEDLE
A1-4SLT
N/A
BOLTING
(Note 3)
GASKETS
A1-5RLT, A1-5RPLT
A1-5RWLT
A1-6SLT
BUTTERFLY
GAUGE
A1-5RLT
A1-5RPLT
A1-4RLT
A1-5RLT, A1-5RWLT
N/A
N/A
A1-9SLT
A1-7RLLT, A1-7RWLT
N/A
Thread and
dimensions per
ASME B16.5
150# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite (FG)
with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW
only USA. Carrara Style SWC - only ITALY)
NOTES:
1. Maximum design conditions: 250 F - 245 PSIG (Group 1.1)
2. MTRs and CTRs for low temperature material and certification tests are required per
ASME B31.3
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-50/100
285
200
250
260
245
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
26 of 196
SPECIFICATION A1
TYPE
GATE
BALL
TAG
ACCEPTABLE
BRANDS
SIZE
DESCRIPTION
A1-1SLT
and Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A1-1RLT
1 4
A1-1RLT
6 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
A1-2SLT
and Smaller
1480 PSI @ 100 F, FS body (ASTMA350 Gr LF2), 316 SS ball and stem,
filled TFE seats, threaded ends per
ASME B1.20.1, lever operated, reduced
port. Fire safe per API 607. Design per
API 608. Test per API 598
A1-2SFLT
and Smaller
1480 PSI @ 100 F, FS body (ASTMA350 Gr LF2), 316 SS ball and stem,
filled TFE seats, threaded ends per
ASME B1.20.1, lever operated, full port.
Fire safe per API 607. Design per API
608. Test per API 598
A1-2RLT
1 - 6
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
27 of 196
SPECIFICATION A1
TYPE
TAG
BALL
A1-2RFLT
SIZE
1 - 6
ACCEPTABLE
BRANDS
DESCRIPTION
Class 150#, CS body (ASTM-A352 Gr
LCC), CS 1 mil ENP ball and stem, fire
safe seat, RF flanged ends per ASME
B16.5, top or end entry construction, full
port, lever or gear (6) operated. Floating
ball. Fire safe per API 607. Design per
API 608. Test per API 598 or ASME
16.34
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
BALL
GLOBE
A1-2RLT
8 and Larger
A1-2RFLT
8 and Larger
A1-4SLT
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A1-4RLT
2 and 8
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
28 of 196
SPECIFICATION A1
TYPE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
A1-5RLT
1 - 3
A1-5RLT
4 and Larger
A1-5RPLT
1 - 1
Bonney Forge
DSI
Smith
Vogt
A1-5RPLT
2 - 8
KF Eagle
Norriseal
Tom Wheatley
A1-5RWLT
2 - 24
Class 150#, CS body and cover (ASTMA352 Gr LCC), 316 SS disc and springs,
soft seat, wafer body design or full
threaded lugged body. Test per API 598
Crane
KF Eagle
Tom Wheatley
Wheatley
NEEDLE
A1-6SLT
1 and Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
BUTTERFLY
A1-7RLLT
3 and Larger
Keystone
Posi-Seal
Velan
Keystone
Posi-Seal
Velan
WKM
CHECK
CHECK
BUTTERFLY
A1-7RWLT
3 and Larger
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
29 of 196
SPECIFICATION A1
TYPE
GAUGE
TAG
A1-9SLT
SIZE
3/4 and
Smaller
ACCEPTABLE
BRANDS
DESCRIPTION
6000# CWP, bar stock body (316 SS),
Teflon packing, delrin seat material, low
temperature arctic lube, one male and
three female, needle port. Complete with
bleeder valve and 316 SS hex plug
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
30 of 196
SPECIFICATION A2
CLASS: ANSI 150#
CS, RF
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
FLANGES
THD
ASTM-A106 GR B,
GALV
150# RF
10
12
14
16
18
20
THRD
150# RF, WN
ASTM-A105, Internally Coated (Note 5)
3000#
THD
BW, SMLS
ASTM-A105, GALV
3000#
24
STD
ASTM-A105, GALV
FITTINGS
BRANCH
(OLETS)
SCH 80
SCH 80
STD
THRD
BW
VALVES (Note 6)
ASTM-A105
GATE
A2-1S
BALL
A2-2S, A2-2SF
PLUG
A2-1R
A2-2R, A2-2RF
N/A
GLOBE
A2-4S
A2-4R
CHECK
A2-5S
A2-6S, A26SFM
A2-5R
NEEDLE
BUTTERFLY
GAUGE
BOLTING
(Note 7)
GASKETS
N/A
N/A
A2-9S
N/A
NOTES:
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
285
200
260
250
245
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
31 of 196
SPECIFICATION A2
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A2-1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A2-1R
2 4
A2-1R
6 and
Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
A2-2S
1 and
Smaller
A2-2SF
1 and
Smaller
A2-2R
2 6
A2-2RF
2 6
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Warren
Velan
WKM
AOP
Balon
DHV
Cameron
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
32 of 196
SPECIFICATION A2
TYPE
BALL
GLOBE
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A2-2R
8 and
Larger
A2-2RF
8 and
Larger
A2-4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A2-4R
2 and
Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
A2-5S
1 and
Smaller
AOP
Balon
DHV
Cameron
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
Newco
Powell
Velan
Vogt
Walworth
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
33 of 196
SPECIFICATION A2
TYPE
CHECK
NEEDLE
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A2-5R
2 - 3
A2-5R
4 and
Larger
A2-6S
1 and
Smaller
A2-6SFM
1 and
Smaller
A2-9S
and
Smaller
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Vogt
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
34 of 196
SPECIFICATION A3
CLASS: ANSI 150#
SS, RF
SIZE
3/4
1 1/2
10
SCH 80S
PIPE
12
16
20
24
SCH 40S
BE, SMLS
ASTM-A312 TP 304
150# RF
FLANGES
SW
150# RF, WN
ASTM-A182 F 304
3000#
SW
BW, SMLS
ASTM-A182 F 304
ASTM-A403 WP 304
FITTINGS
3000#
SCH 40S
BRANCH
(OLETS)
SW
BW
GATE
A3-1S
ASTM-A182 F 304
A3-1R
VALVES
BALL
A3-2R, A3-2RF
PLUG
N/A
GLOBE
N/A
A3-4R
N/A
CHECK
N/A
A3-5R, A3-5RW
NEEDLE
A3-6S
BUTTERFLY
GAUGE
BOLTING
(Note 4)
GASKETS
N/A
N/A
A3-9S
A3-7RL, A3-7RW
N/A
NOTES:
1. Maximum design conditions: 250 F - 217 PSIG (Group 2.1)
2. Wall thicknesses are based on allowable stresses per ASME B31.3 for
304 SS material
3. Threaded valves are allowed on instruments, vents and drains
4. Use pipe threaded only for valves connections
275
200
230
250
217
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
35 of 196
SPECIFICATION A3
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A3-1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A3-1R
2 4
A3-1R
6 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
A3-2R
- 6
A3-2RF
A3-2R
8 - 10
A3-2RF
8 - 10
AOP
Cameron
DHV
Flow-tek
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
36 of 196
SPECIFICATION A3
SIZE
ACCEPTABLE
BRANDS
TYPE
TAG
DESCRIPTION
BALL
A3-2R
12 - 24
A3-2RF
12 - 24
GLOBE
A3-4R
2 - 8
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
CHECK
A3-5R
2 3
A3-5R
4 and Larger
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
A3-5RP
2 - 8
KF Eagle
Norriseal
Tom Wheatley
A3-5RW
2 and Larger
Crane
KF Eagle
Tom Wheatley
Wheatley
AOP
Cameron
DHV
Flow-tek
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
37 of 196
SPECIFICATION A3
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
NEEDLE
A3-6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
BUTTERFLY
A3-7RL
3 and
Larger
A3-7RW
3 and
Larger
Bray
Center Line
Demco
Flowseal
Keystone
KF
Norris
Quadrant
Velan
A3-9S
3/4 and
Smaller
GAUGE
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
38 of 196
SPECIFICATION A4
CLASS: ANSI 150#
CS, RF
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
FLANGES
10
SCH 80
12
16
20
24
STD
THD/PE
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
150# RF
THD/SW
150# RF/FF, WN
ASTM-A105
3000#
FITTINGS
THD/SW
BW, SMLS
ASTM-A105
ASTM-A234 GR WPB
3000#
BRANCH
(OLETS)
SCH 80
STD
THD/SW
BW
ASTM-A105
GATE
BALL
VALVES
PLUG
A4-1R
A4-2R, A4-2RF
N/A
GLOBE
A4-4R
CHECK
A4-5R
NEEDLE
A4-6S, A4-6SFM
BUTTERFLY
FOOT
GAUGE
BOLTING
(Note 5)
GASKETS
N/A
N/A
A4-7RL, A4-7RW
N/A
A4-9S
N/A
Thread and
dimensions per
ASME B16.5
150# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite (FG)
with CS outer & inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock
Style RWI USA ONLY. Carrara Style SWC/I - ITALY ONLY)
150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder
(Flexitallic, Lamons, Garlock - USA ONLY)
NOTES:
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
285
200
260
2. Threaded fittings and valves are allowed on instruments, vents and drains
250
245
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
39 of 196
SPECIFICATION A4
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
A4-1S
1 and
Smaller
A4-1Z
1 and
Smaller
A4-1R
1 and
Smaller
A4-1R
2 4
A4-1R
6 and Larger
A4-2S
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
reduced port, lever operated. Fire safe.
Design per API 608. Test per API 598
A4-2Z
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, socked weld ends per ASME
B16.11, reduced port, lever operated. Fire
safe. Design per API 608. Test per API
598
ACCEPTABLE
BRANDS
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
40 of 196
SPECIFICATION A4
TYPE
TAG
SIZE
BALL
A4-2SF
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
full port, lever operated. Fire safe. Design
per API 608. Test per API 598
A4-2ZF
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, socked weld ends per ASME
B16.11, full port, lever operated. Fire safe.
Design per API 608. Test per API 598
A4-2R
1 and
Smaller
A4-2RF
1 and
Smaller
A4-2R
2 6
A4-2RF
2 6
All
Services
BALL
Standard
Services
DESCRIPTION
ACCEPTABLE
BRANDS
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
KF
MTS
Nibco
Nutron
PBV
Quadrant
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
41 of 196
SPECIFICATION A4
TYPE
BALL
TAG
SIZE
A4-2R
8 and Larger
A4-2RF
8 and Larger
A4-2R
2 4
6 12
14 and Larger
2 4
Standard
Services
BALL
DESCRIPTION
HO
PF
Services
A4-2RF
ACCEPTABLE
BRANDS
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
42 of 196
SPECIFICATION A4
TYPE
GLOBE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
6 12
14 and Larger
A4-4S
1 and
Smaller
A4-4Z
1 and
Smaller
A4-4R
1 and
Smaller
Bonney Forge
DSI
Newco
Smith
Velan
Vogt
A4-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
43 of 196
SPECIFICATION A4
TYPE
CHECK
NEEDLE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A4-5S
1 and
Smaller
A4-5Z
1 and
Smaller
A4-5R
1 and
Smaller
A4-5R
2 - 3
A4-5R
4 and Larger
A4-6S
1 and Smaller
A4-6SFM
1 and Smaller
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
44 of 196
SPECIFICATION A4
TYPE
BUTTERFLY
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A4-7RL
3 and larger
A4-7RW
3 and larger
A4-9S
and
Smaller
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
45 of 196
SPECIFICATION A5
CLASS: ANSI 150#
CS, RF
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
FLANGES
FITTINGS
10
SCH 80
12
14
16
XS
18
20
SCH 40
THD
ASTM-A106 GR B,
GALV
150# RF
ASTM-A106 GR B, API-5L GR B
24
30
SCH
20
THRD
150# RF, WN
ASTM-A105, GALV
ASTM-A105
3000# FS
THRD
BW, SMLS
ASTM-A105, GALV
ASTM-A234 GR WPB
3000#
BRANCH
(OLETS)
SCH 80
XS
THRD
SCH 40
BW
ASTM-A105
GATE
A5-1S
BALL
A5-2S, A5-2SF
VALVES
PLUG
GLOBE
CHECK
A5-4S
BUTTERFLY
GAUGE
A5-9S
BOLTING
(Note 4)
GASKETS
A5-2R, A5-2RF
N/A
A5-5S
A5-6S, A56SFM
N/A
NEEDLE
A5-1R
A5-4R
A5-5R
N/A
A5-7RL, A5-7RW
N/A
NOTES:
1. Maximum design conditions: 250 F - 245 PSIG
2. This specification will be used Only for new systems
3. Piping 1 or smaller subject to vibration or pulsation shall be SW or flanged
4. For studbolts standard lenghts, see ANNEX No. 6
5. For ANSI Pipe Schedules, see ANNEX No. 7
6. Corrosion Allowance = 1/8
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
285
20/100
200
260
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
46 of 196
SPECIFICATION A5
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
A5-1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A5-1R
2 4
Class 150#, CS body and bonnet (ASTMA216 Gr WCB or ASTM-A105), Trim 12. ,
HF Stellite seats RF flanged ends per
ASME B16.5, OS&Y, bolted bonnet, flexible
wedge gate, Hand wheel operated. Design
per API 600. Test per API 598
A5-1R
6 and Larger
Class 150#, CS body and bonnet (ASTMA216 Gr WCB or ASTM-A105), Trim 12. ,
HF Stellite seats RF flanged ends per
ASME B16.5, OS&Y, bolted bonnet, flexible
wedge gate, Gear operated. Design per API
600. Test per API 598.
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
A5-2S
1 and
Smaller
A5-2SF
1 and
Smaller
A5-2R
2 6
A5-2RF
2 6
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Warren
Velan
WKM
AOP
Balon
DHV
Cameron
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
47 of 196
SPECIFICATION A5
TYPE
BALL
GLOBE
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A5-2R
8 and Larger
A5-2RF
8 and Larger
A5-4S
1 and
Smaller
Class 800#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats,
threaded ends per ASME B1.20.1, OS&Y,
bolted bonnet. Hand wheel operated.
Design per API 602. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
A5-4R
2 and Larger
Class 150#, CS body and bonnet (ASTMA216 Gr WCB or ASTM-A105), Trim 12, HF
Stellite seats, RF flanged ends per ASME
B16.5, OS&Y, bolted bonnet. Hand wheel
operated. Design per API 600. Test per API
598
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
A5-5S
1 and
Smaller
Class 800#, FS body and cover (ASTMA105), Trim 12, HF Stellite seats,
threaded ends per ASME B1.20.1,
horizontal swing, threaded or bolted cover.
Design per API 602. Test per API 598
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
Newco
Powell
Velan
Vogt
Walworth
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
48 of 196
SPECIFICATION A5
TYPE
CHECK
NEEDLE
BUTTERFLY
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
A5-5R
2 - 3
Class 150#, CS body and cover (ASTMA216 Gr WCB or ASTM-A105), Trim 12,
HF Stellite seats, RF flanged ends per
ASME B16.5, horizontal swing, bolted
cover. Design per API 594. Test per API
598
A5-5R
4 and
Larger
Class 150#, CS body and cover (ASTMA216 Gr WCB or ASTM-A105), Trim 12,
HF Stellite seats, RF flanged ends per
ASME B16.5, horizontal swing, bolted
cover. Body drain NPT. Design per
API 594. Test per API 598
A5-6S
1 and
Smaller
A5-6SFM
1 and
Smaller
A5-7RL
3 and larger
A5-7RW
3 and larger
A5-9S
and
Smaller
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
49 of 196
SPECIFICATION BS
CLASS: ANSI 150#
SS, RF
SIZE
PIPE
1/2
3/4
1 1/2
10
12
SCH 40S
SCH 10S
BE, SMLS
16
20
24
ASTM-A312 TP 304L
150# RF
FLANGES
SW
150# RF, WN
ASTM-A182 F 304L
3000#
FITTINGS
SW
BW, SMLS
ASTM-A182 F 304L
ASTM-A403 WP 304L
3000#
SCH 10S
BRANCH
(OLETS)
SW
BW
ASTM-A182 F 304L
GATE
VALVES
BALL
BS-1S, BS-1Z
BS-2S, BS-2SF
BS-2Z, BS-2ZF
PLUG
BS-4S, BS-4Z
CHECK
BS-5S, BS-5Z
NEEDLE
BS-6S
BUTTERFLY
BOLTING
(Note 4)
GASKETS
BS-2R, BS-2RF
N/A
GLOBE
GAUGE
BS-1R
BS-4R
BS-5R
N/A
N/A
BS-9S
BS-7RL, BS-7RW
N/A
Bolts: ASTM-A193 GR B8
Nuts: ASTM-A194 GR 8 Heavy Hex Nuts
150# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with
SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW USA
ONLY. Carrara Style SWC - ITALY ONLY)
NOTES
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME
B16.5
-20/100
230
200
195
2. Wall thicknesses are based on allowable stresses per ASME B31.3 for 316 SS material
3. Use pipe threaded only for valves connections
250
185
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
50 of 196
SPECIFICATION BS
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
BS-1S
1 and
Smaller
BS-1Z
1 and
Smaller
BS-1R
2 - 4
BS-1R
6 and Larger
BS-2S
1 and
Smaller
BS-2Z
1 and
Smaller
BS-2SF
1 and
Smaller
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ACCEPTABLE
BRANDS
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
Flow-tek
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
51 of 196
SPECIFICATION BS
SIZE
ACCEPTABLE
BRANDS
TYPE
TAG
DESCRIPTION
BALL
BS-2ZF
1 and
Smaller
AOP
Flow-tek
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
BS-2R
2 6
BS-2RF
2 6
AOP
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
BS-2R
8 and Larger
BS-2RF
8 and Larger
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
52 of 196
SPECIFICATION BS
TYPE
GLOBE
CHECK
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
BS-4S
1 and
Smaller
BS-4Z
1 and
Smaller
BS-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
BS-5S
1 and
Smaller
BS-5Z
1 and
Smaller
AOP
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
BS-5R
2 - 3
BS-5R
4 and Larger
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
53 of 196
SPECIFICATION BS
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
NEEDLE
BS-6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
BUTTERFLY
BS-7RL
3 and Larger
BS-7RW
3 and Larger
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
BS-9S
and
Smaller
AGCO
AOP
HEX
Swagelok
GAUGE
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
54 of 196
SPECIFICATION B
CLASS: ANSI 300#
CS, RF
SIZE
1/2
3/4
SCH 160
PIPE
FLANGES
1 1/2
SCH 80
10
12
14
STD
16
18
SCH 40
THD/PE
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
300# RF
THD/SW
300# RF, WN
20
24
SCH 30 SCH 40
ASTM-A105
FITTINGS
3000#
THD/SW
BW, SMLS
ASTM-A105
3000#
BRANCH
(OLETS)
ASTM-A234 GR WPB
SCH 80
STD
SCH 40
THD/SW
SCH 30 SCH 40
BW
ASTM-A105
GATE
VALVES
BALL
B1S, B1Z
B2S, B2SF
B2Z, B2ZF
PLUG
GLOBE
CHECK
NEEDLE
BOLTING
(Note 3)
GASKETS
B2R, B2RF
N/A
B4S, B4Z
B4R
B5S, B5Z
B6S, B6SFM
BUTTERFLY
GAUGE
B1R
N/A
B9S
B5R
N/A
B7RL, B7RW
N/A
NOTES:
1. Maximum design conditions: 250 F - 667 PSIG (Group 1.1)
2. Piping 1 or smaller subject to vibration or pulsation shall be SW or flanged
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
740
200
250
680
667
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
55 of 196
SPECIFICATION B
TYPE
TAG
GATE
B1S
1 and
Smaller
B1Z
1 and
Smaller
B1R
2 4
B1R
6 and Larger
B2S
1 and
Smaller
B2Z
1 and
Smaller
B2SF
1 and
Smaller
BALL
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
56 of 196
SPECIFICATION B
TYPE
BALL
GLOBE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B2ZF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
B2R
2 3
B2RF
2 3
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
B2R
4 and Larger
B2RF
4 and Larger
B4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
57 of 196
SPECIFICATION B
TAG
GLOBE
B4Z
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
B4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
B5S
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, HF
Stellite seats, threaded ends per ASME
B1.20.1, horizontal swing, screwed or bolted
cover. Design per API 602. Test per API 598
B5Z
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, HF
Stellite seats ,socket weld ends per ASME
B16.11, horizontal swing, screwed or bolted
cover. Design per API 602. Test per API 598
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
B5R
2 - 3
B5R
4 and Larger
CHECK
SIZE
ACCEPTABLE
BRANDS
TYPE
DESCRIPTION
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
58 of 196
SPECIFICATION B
TYPE
NEEDLE
BUTTERFLY
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B6S
1 and
Smaller
B6SFM
1 and
Smaller
B7RL
3 and Larger
B7RW
3 and Larger
B9S
and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
Velan
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
59 of 196
SPECIFICATION B1
CLASS: ANSI 300#
CS, RF
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
SCH 80
10
12
14
16
STD
THD/PE, SMLS
20
24
XH
SCH 40
XH
SCH 40
BE, SMLS
ASTM-A333 GR 6 (Note 2)
FLANGES
300# RF
THD/SW
300# RF, WN
ASTM-A350 GR LF2
FITTINGS
3000#
SW/THD
BW, SMLS
ASTM-A350 GR LF2
3000#
BRANCH
(OLETS)
ASTM-A420 GR WPL6
SCH 80
STD
THD/SW
BW
ASTM-A350 GR LF2
GATE
VALVES
BALL
B1-1SLT
B1-2SLT
B1-2SFLT
B1-1RLT
B1-2RLT, B1-2RFLT
PLUG
GLOBE
N/A
B1-4SLT
CHECK
N/A
NEEDLE
B1-6SLT
BUTTERFLY
GAUGE
BOLTING
(Note 3)
GASKETS
B1-4RLT
B1-5RLT
B1-5RPLT
B1-5RLT, B1-5RPLT
B1-5RWLT
B1-5RLT, B1-5RWLT
N/A
N/A
B1-9SLT
B1-7RLLT, B1-7RWLT
N/A
NOTES:
1. Maximum design conditions: 250 F - 667 PSIG (Group 1.1)
2. MTRs and CTRs for low temperature material and certification tests are required per ASME
B31.3
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-50/100
740
200
675
250
667
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
60 of 196
SPECIFICATION B1
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
B1-1SLT
and
Smaller
Class 800# (1975# CWP), FS body (ASTMA350 Gr LF2), Trim 12, HF Stellite seats,
grafoil packing, threaded ends per ASME
B1.20.1, bolted body construction, OS&Y, solid
wedge. Hand wheel operated. Design per API
602. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
B1-1RLT
1 4
B1-1RLT
6 and
Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
B1-2SLT
and
Smaller
B12SFLT
and
Smaller
B1-2RLT
1 - 3
B12RFLT
1 - 3
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
AOP
Balon
DHV
KF
MTS
Nibco
Nutron
PBV
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
61 of 196
SPECIFICATION B1
TAG
BALL
B1-2RLT
4 and
Larger
B12RFLT
4 and
Larger
B1-4SLT
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
B1-4RLT
2 and
Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
B1-5RLT
1 - 3
B1-5RLT
4 and
Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
GLOBE
CHECK
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
TYPE
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
WKM
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
62 of 196
SPECIFICATION B1
TYPE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
B15RPLT
1 - 1
B15RPLT
2 - 8
B15RWLT
2 - 24
Crane
KF Eagle
Tom Wheatley
Wheatley
NEEDLE
B1-6SLT
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
BUTTER-FLY
B17RLLT
3 and
Larger
Keystone
Posi-Seal
Velan
WKM
B17RWLT
3 and
Larger
B1-9SLT
3/4 and
Smaller
CHECK
GAUGE
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Bonney Forge
DHV
DSI
Smith
Vogt
DHV
KF Eagle
Norriseal
Tom Wheatley
AGCO
HEX
Swagelok
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
63 of 196
SPECIFICATION B3
CLASS: ANSI 300#
SS, RF
SIZE
PIPE
1/2
3/4
1 1/2
SCH 80S
SCH 40S
BE, SMLS
10
ASTM-A312 TP 304
300# RF
FLANGES
SW
300# RF, WN
ASTM-A182 F 304
3000#
FITTINGS
SW
BW, SMLS
ASTM-A182 F 304
ASTM-A403 WP 304
3000#
SCH 40S
BRANCH
(OLETS)
SW
BW
ASTM-A182 F 304
VALVES
GATE
B3-1S, B3-1Z
B3-1R
BALL
B3-2R, B3-2RF
PLUG
N/A
GLOBE
B3-4R
CHECK
NEEDLE
N/A
B3-6S, B3-6SFM
BUTTERFLY
GAUGE
BOLTING
(Note 5)
GASKETS
B3-5R, B3-5RP
N/A
N/A
B3-9S
N/A
NOTES:
1. Maximum design conditions: 250 F - 570 PSIG (Group 2.1)
2. Valve elastomers in contact with process fluids shall be suitable for exposure to
Hydrogen Sulfide, Carbon Dioxide and Aromatics
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
4. Use pipe threaded only for valves connections
720
200
600
250
570
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
64 of 196
SPECIFICATION B3
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
B3-1S
1 and
Smaller
B3-1Z
1 and
Smaller
B3-1R
2 - 4
B3-1R
6 and Larger
B3-2R
- 3
B3-2RF
- 3
ACCEPTABLE
BRANDS
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Cameron
DHV
Flow-tek
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
65 of 196
SPECIFICATION B3
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
TYPE
TAG
BALL
B3-2R
4 - 10
B3-2RF
4 - 10
GLOBE
B3-4R
- 10
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
CHECK
B3-5R
2 - 3
B3-5R
4 and Larger
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
B3-5RP
2 - 10
AOP
Cameron
DHV
Flow-tek
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
KF Eagle
Norriseal
Tom Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
66 of 196
SPECIFICATION B3
TYPE
NEEDLE
GAUGE
TAG
SIZE
DESCRIPTION
B3-6S
1 and
Smaller
B3-6SFM
1 and
Smaller
B3-9S
and
Smaller
ACCEPTABLE
BRANDS
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
67 of 196
SPECIFICATION B4
CLASS: ANSI 300#
CS, RF
SIZE
1/2
3/4
SCH XXS
PIPE
FLANGES
1 1/2
SCH 160
SCH 80
10
SCH 40
12
16
18
XS
THD/PE
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
300# RF
THD/SW
300# RF, WN
20
24
SCH 40
ASTM-A105
FITTINGS
3000#
THD/SW
BW, SMLS
ASTM-A105
3000#
BRANCH
(OLETS)
ASTM-A234 GR WPB
SCH 80
SCH 40
SCH 40
XS
THD/SW
BW
ASTM-A105
GATE
VALVES
BALL
PLUG
B4-1R
B4-2R, B4-2RF
N/A
GLOBE
B4-4R
CHECK
B4-5R, B4-5RP
BUTTERFLY
GAUGE
B4-9S
NEEDLE
BOLTING
(Note 5)
GASKETS
N/A
B4-7RL, B4-7RW
N/A
NOTES:
1. Maximum design conditions: 250 F - 667 PSIG (Group 1.1)
2. Threaded fittings and valves are allowed on instruments, vents and drains
3. Corrosion Allowance = 1/8
4. Valves elastomers in contact with process fluids shall be suitable for exposure to wet
Carbon Dioxide.
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
740
200
250
680
667
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
68 of 196
SPECIFICATION B4
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B4-1S
1 and
Smaller
B4-1Z
1 and
Smaller
B4-1R
1 and
Smaller
B4-1R
2 4
B4-1R
6 and
Larger
B4-2S
1 and
Smaller
B4-2Z
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
69 of 196
SPECIFICATION B4
TYPE
BALL
TAG
SIZE
DESCRIPTION
B4-2SF
1 and
Smaller
B4-2ZF
1 and
Smaller
B4-2R
1 and
Smaller
B4-2RF
1 and
Smaller
B4-2R
2 3
B4-2RF
2 3
B4-2R
4 and
Larger
ACCEPTABLE
BRANDS
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
70 of 196
SPECIFICATION B4
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
BALL
B4-2RF
4 and
Larger
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
GLOBE
B4-4S
1 and
Smaller
B4-4Z
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
B4-4R
1 and
Smaller
Bonney Forge
DSI
Newco
Smith
Velan
Vogt
B4-4R
2 and
Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
71 of 196
SPECIFICATION B4
TYPE
CHECK
NEEDLE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B4-5S
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8 HF Stellite
seats, threaded ends per ASME B1.20.1,
horizontal swing, screwed or bolted cover.
Design per API 602. Test per API 598
B4-5Z
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, HF Stellite
seats, socket weld ends per ASME B16.11,
horizontal swing, screwed or bolted cover.
Design per API 602. Test per API 598
B4-5R
1 and
Smaller
B4-5R
2 - 3
B4-5R
4 and
Larger
B4-5RP
2 - 10
KF Eagle
Norriseal
Tom Wheatley
B4-6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
B4-6SFM
1 and
Smaller
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
AOP
Balon
Bonney Forge
DHV
Crane
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
72 of 196
SPECIFICATION B4
TYPE
BUTTER-
TAG
DESCRIPTION
B4-7RL
3 and
Larger
B4-7RW
3 and
Larger
B4-9S
and
Smaller
FLY
GAUGE
SIZE
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
ACCEPTABLE
BRANDS
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
Velan
AGCO
HEX
Swagelok
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
73 of 196
SPECIFICATION B5
CLASS: ANSI 300#
CS, RF
SIZE
1/2
3/4
SCH XXS
PIPE
FLANGES
1 1/2
SCH 160
SCH 80
10
12
14
16
STD
18
20
24
SCH 40
THD/PE
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
300# RF
THD/SW
300# RF, WN
ASTM-A105
FITTINGS
3000#
THD/SW
BW, SMLS
ASTM-A105
3000#
BRANCH
(OLETS)
ASTM-A234 GR WPB
SCH 80
STD
SCH 40
THD/SW
BW
ASTM-A105
GATE
VALVES
BALL
B5-1S, B5-1Z
B5-2S, B5-2SF
B5-2Z, B5-2ZF
PLUG
B5-1R
B5-2R, B5-2RF
N/A
GLOBE
B5-4S, B5-4Z
B5-4R
CHECK
B5-5S, B5-5Z
B5-6S,
B5-6SFM
N/A
B5-5R
NEEDLE
BUTTERFLY
GAUGE
BOLTING
(Note 3)
GASKETS
B5-9S
N/A
B5-7RL, B5-7RW
N/A
NOTES:
1. Maximum design conditions: 250 F - 667 PSIG (Group 1.1)
2. Piping 1 or smaller subject to vibration or pulsation shall be SW or flanged
3. For studbolts standard lenghts, see ANNEX No. 6
4. For ANSI Pipe Schedules, see ANNEX No. 7
5. Corrosion Allowance = 1/8
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
740
200
250
680
667
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
74 of 196
SPECIFICATION B5
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B5-1S
1 and
Smaller
B5-1Z
1 and
Smaller
B5-1R
2 4
B5-1R
6 and Larger
B5-2S
1 and
Smaller
B5-2Z
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon
seats, socked weld ends per ASME B16.11,
reduced port, lever operated. Fire safe.
Design per API 608. Test per API 598
B5-2SF
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
75 of 196
SPECIFICATION B5
TYPE
BALL
GLOBE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B5-2ZF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
B5-2R
2 3
B5-2RF
2 3
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
B5-2R
4 and Larger
B5-2RF
4 and Larger
B5-4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
76 of 196
SPECIFICATION B5
TYPE
GLOBE
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B5-4Z
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
B5-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
B5-5S
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, HF
Stellite seats, threaded ends per ASME
B1.20.1, horizontal swing, screwed or bolted
cover. Design per API 602. Test per API 598
B5-5Z
1 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, HF
Stellite seats ,socket weld ends per ASME
B16.11, horizontal swing, screwed or bolted
cover. Design per API 602. Test per API 598
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
B5-5R
2 - 3
B5-5R
4 and Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
77 of 196
SPECIFICATION B5
TYPE
NEEDLE
BUTTERFLY
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
B5-6S
1 and
Smaller
B5-6SFM
1 and
Smaller
B5-7RL
3 and Larger
B5-7RW
3 and Larger
B5-9S
and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
Velan
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
78 of 196
SPECIFICATION C
CLASS: ANSI 300#
SERVICE: CORROSIVE PRODUCED OIL / WATER
CS, RF
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
SCH 80
THD
ASTM-A106 GR B,
GALV
300# RF
FLANGES
10
12
14
STD
16
300# RF, WN
3000#
THRD
BW, SMLS
ASTM-A105, GALV
STD
SCH 40
THRD
BW
ASTM-A105, Internally Coated (Note 5)
GATE
C1S
C1R, C1RSG
BALL
C2S, C2SF
PLUG
SCH 30
C2R, C2RF
N/A
GLOBE
C4S
CHECK
C4R
C5S
C5R
C6S, C6SFM
BUTTERFLY
GASKETS
SCH 30
ASTM-A105
BOLTING
(Note 7)
24
3000#
GAUGE
20
BE, SMLS/ERW-HFI
THRD
BRANCH
(OLETS)
NEEDLE
18
SCH 40
ASTM-A105, GALV
FITTINGS
VALVES (Note 6)
N/A
N/A
C9S
N/A
NOTES:
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
740
200
675
250
667
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
79 of 196
SPECIFICATION C
ACCEPTABLE
BRANDS
TYPE
TAG
SIZE
GATE
C1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
C1R
2 4
C1R
6 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
C1RSG
2 and Larger
M&J
Foster
WKM
C2S
1 and
Smaller
C2SF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
BALL
DESCRIPTION
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
80 of 196
SPECIFICATION C
TYPE
BALL
GLOBE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
C2R
2 3
C2RF
2 3
C2R
4 and
Larger
C2RF
4 and
Larger
C4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
C4R
2 and
Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
81 of 196
SPECIFICATION C
ACCEPTABLE
BRANDS
TYPE
TAG
SIZE
CHECK
C5S
1 and
Smaller
AOP
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
C5R
2 - 3
C5R
4 and
Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
C6S
1 and
Smaller
C6SFM
1 and
Smaller
C9S
and
Smaller
NEEDLE
GAUGE
DESCRIPTION
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
82 of 196
SPECIFICATION C1
CLASS: ANSI 300#
SERVICE: PROCESS FLUID (ASME B31.4)
CS, RF
SIZE
SCH.80
PIPE
ASTM A-106-B
10
12
16
18
0.438 WT
20
24
30
0.5 WT
SCH.80
FLANGES
0.438 WT
0.5 WT
ASTM A-105
ASTM-A694 F65
300# RF, WN
0.438 WT
0.5 WT
ASTM-A694 F65
ANCHOR
FLANGES
N/A
FITTINGS
SCH.80
ASME B16.9
FITTINGS
ASTM A-234 WPB
300# RF, WN
Design Code ASME B31.4, Temperature Differential per specific
application, 1500 psi as standard Design concrete bearing stress
0.438 WT
0.5 WT
PIPE BENDS
API-5L GR X65, FBE EXTERNAL COATING
0.438 WT
BRANCH
(BARRED TEE)
N/A
0.5 WT
BW
VALVES
GASKETS
C1-2R
C1-2RF
N/A
C1-5R
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
300# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with CS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI,
Garlock Style RWI USA ONLY. Carrara Style SWC/I - ITALY ONLY)
NOTES:
-20/100
740
200
675
250
667
3. Pipe welding joints shall have a hardness in the "HAZ" not higher than 22 HRC.
4. Pipeline shall be underground installed unless otherwise is defined in the detail
engineering.
5. Corrosion allowance = 1/8
6. Minimum thickness for internal pressure only, structural minimum required thickness
shall be evaluated on the basis of pipeline stress analysis, ASME code compliance
and other applicable.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
83 of 196
SPECIFICATION C1
TYPE
TAG
SIZE
DESCRIPTION
2 4
8 10
MLVs
C1-2R
BALL
C1-2RF
ACCEPTABLE
BRANDS
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Cameron
KF
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
84 of 196
SPECIFICATION C1
TYPE
TAG
C1-2RF
SIZE
DESCRIPTION
12 30
10 30
Class 300#, FS body and cover (ASTMA105), internally coated, Trim 12, HF Stellite
seats, RF flanged ends per ASME B16.5,
horizontal swing, bolted cover. Design per
API 594. Test per API 598.
MLVs
CHECK
C1-5R
ACCEPTABLE
BRANDS
Cameron
Tom Wheatley
KF
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
85 of 196
SPECIFICATION C2
CLASS: ANSI 300#
CS, RF
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
FLANGES
FITTINGS
10
12
14
16
XS
18
20
24
SCH 40
THD
ASTM-A106 GR B,
GALV
300# RF
ASTM-A106 GR B, API-5L GR B
THRD
300# RF, WN
ASTM-A105, GALV
ASTM-A105
3000# FS
THRD
BW, SMLS
ASTM-A105, GALV
ASTM-A234 GR WPB
3000#
BRANCH
(OLETS)
SCH 80
SCH 80
XS
SCH 40
THRD
BW
ASTM-A105
GATE
C2-1S
BALL
C2-2S, C2-2SF
VALVES
PLUG
C2-1R
C2-2R, C2-2RF
N/A
GLOBE
C2-4S
C2-4R
CHECK
C2-5S
C2-6S, C26SFM
C2-5R
NEEDLE
BUTTERFLY
GAUGE
BOLTING
(Note 4)
GASKETS
N/A
N/A
C2-9S
N/A
NOTES:
740
200
675
250
667
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
86 of 196
SPECIFICATION C2
TYPE
GATE
BALL
All
Services
BALL
Standard
Services
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
C2-1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
C2-1R
2 4
C2-1R
6 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
C2-2S
1 and
Smaller
C2-2SF
1 and
Smaller
C2-2R
2 3
C2-2RF
2 3
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
87 of 196
SPECIFICATION C2
TYPE
BALL
TAG
SIZE
C2-2R
4 and Larger
C2-2RF
4 and Larger
C2-2R
2 3
4 12
14 and Larger
2 3
4 12
Standard
Services
BALL
DESCRIPTION
HO
PF
Services
C2-2RF
ACCEPTABLE
BRANDS
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
88 of 196
SPECIFICATION C2
TYPE
GLOBE
CHECK
TAG
ACCEPTABLE
BRANDS
SIZE
DESCRIPTION
14 and Larger
C2-4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
C2-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
C2-5S
1 and
Smaller
AOP
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
C2-5R
2 - 3
C2-5R
4 and Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
89 of 196
SPECIFICATION C2
TYPE
NEEDLE
GAUGE
TAG
SIZE
DESCRIPTION
C2-6S
1 and Smaller
C2-6SFM
1 and Smaller
C2-9S
and Smaller
ACCEPTABLE
BRANDS
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
90 of 196
SPECIFICATION D
CLASS: ANSI 600#
CS, RF
SIZE
1/2
3/4
1 1/2
10
12
SCH 160
PIPE
16
20
SCH 80
THD
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
600# RF
THD
600# RF, WN
FLANGES
24
ASTM-A105
6000#
FITTINGS
3000#
THD
BW, SMLS
ASTM-A105
ASTM-A234 GR WPB
6000#
3000#
SCH 80
BRANCH
(OLETS)
THD
GATE
D1S
D1R
BALL
D2S, D2SF
D2R, D2RF
BW
VALVES
ASTM-A105
PLUG
N/A
GLOBE
D4S
CHECK
NEEDLE
D5S
BOLTING
(Note 3)
GASKETS
D5R
D6S, D6SFM
BUTTERFLY
GAUGE
D4R
N/A
N/A
D9S
N/A
NOTES:
1480
200
1350
250
1335
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
91 of 196
SPECIFICATION D
TAG
GATE
D1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
D1R
2 3
D1R
4 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
D2S
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
reduced port, lever operated. Fire safe.
Design per API 608. Test per API 598
D2SF
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
full port, lever operated. Fire safe. Design
per API 608. Test per API 598
D2R
2 and Larger
BALL
All Services
BALL
Standard
Services
SIZE
ACCEPTABLE
BRANDS
TYPE
DESCRIPTION
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
92 of 196
SPECIFICATION D
TYPE
TAG
SIZE
BALL
Standard
Services
D2RF
2 and Larger
BALL
HO
PF
Services
D2R
2 4
Class 600#, FS body (ASTM-A105), SS316 ball and stem, PEEK seats, RF
flanged ends per ASME B16.5, reduced
port, lever or gear (4 and larger)
operated. Trunnion mounted, double block
and bleed and sealant injection fittings.
Fire safe. Design and test per API 6D
6-12
14 and larger
2 4
Class 600#, FS body (ASTM-A105), SS316 ball and stem, PEEK seats, RF
flanged ends per ASME B16.5, full port,
lever or gear (4 and larger) operated.
Trunnion mounted, double block and
bleed and sealant injection fittings. Fire
safe. Design and test per API 6D
D2RF
ACCEPTABLE
BRANDS
DESCRIPTION
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
93 of 196
SPECIFICATION D
TYPE
GLOBE
CHECK
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
PBV
Quadrant
TK
Velan
WKM
6-12
14 and larger
D4S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
D4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
D5S
1 and
Smaller
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
94 of 196
SPECIFICATION D
TYPE
TAG
CHECK
D5R
2 - 3
D5R
4 and Larger
D6S
1 and Smaller
D6SFM
1 and Smaller
D9S
and Smaller
NEEDLE
GAUGE
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
95 of 196
SPECIFICATION D1
CLASS: ANSI 600#
CS, RF
SIZE
1/2
3/4
1 1/2
10
SCH 160
PIPE
16
20
24
SCH 80
THRD
ASTM-A106 GR B, GALV
600# RF
THRD
600# RF, WN
ASTM-A105, GALV
3000#
THRD
BW, SMLS
ASTM-A105, GALV
3000#
SCH 80
THRD
BW
ASTM-A105
GATE
D1-1S
D1-1R, D1-1RSG
BALL
D1-2S, D1-2SF
D1-2R, D1-2RF
FLANGES
FITTINGS
BRANCH
(OLETS)
VALVES (Note 6)
12
PLUG
N/A
GLOBE
D1-4S
CHECK
NEEDLE
D1-5S
BOLTING
(Note 7)
GASKETS
D1-5R
D1-6S, D1-6SFM
BUTTERFLY
GAUGE
D1-4R
N/A
N/A
D1-9S
N/A
600# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock
Style RW USA ONLY. Carrara Style SWC - ITALY ONLY)
PRESS./TEMP. RATINGS
F
PSIG
REF. ASME B16.5
NOTES:
-20/100
1480
200
1350
250
1335
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
96 of 196
SPECIFICATION D1
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
D1-1S
1 and
Smaller
Class 1500#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats, graphite
packing, threaded ends per ASME B1.20.1,
OS&Y, bolted bonnet, solid wedge gate.
Hand wheel operated. Design per API 602.
Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
D1-1R
2 3
D1-1R
4 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
D1-1RSG
2 and Larger
M&J
Foster
WKM
D1-2S
1 and
Smaller
D1-2SF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
97 of 196
SPECIFICATION D1
TYPE
BALL
GLOBE
CHECK
TAG
ACCEPTABLE
BRANDS
SIZE
DESCRIPTION
D1-2R
2 and Larger
D1-2RF
2 and Larger
D1-4S
1 and
Smaller
Class 1500#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats, threaded
ends per ASME B1.20.1, OS&Y, bolted
bonnet. Hand wheel operated. Design per
API 602. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
D1-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
D1-5S
1 and
Smaller
Class 1500#, FS body and cover (ASTMA105), Trim 12, HF Stellite seats, threaded
ends per ASME B1.20.1, horizontal swing,
threaded or bolted cover. Design per API
602. Test per API 598
AOP
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
98 of 196
SPECIFICATION D1
TYPE
CHECK
NEEDLE
GAUGE
TAG
SIZE
DESCRIPTION
D1-5R
2 - 3
D1-5R
4 and Larger
D1-6S
1 and
Smaller
D1-6SFM
1 and
Smaller
D1-9S
3/4 and
Smaller
ACCEPTABLE
BRANDS
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
SCV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
99 of 196
SPECIFICATION D3
CLASS: ANSI 600#
SS, RF
SIZE
1/2
1 1/2
SCH 80S
PIPE
SCH 40S
10
SCH 80S
BE, SMLS
ASTM-A312 TP 304
FLANGES
600# RF
SW
600# RF, WN
ASTM-A182 F 304
FITTINGS
3000#
SW
BW, SMLS
ASTM-A182 F 304
ASTM-A403 WP 304
3000#
SCH 40S
BRANCH
(OLETS)
SCH 80S
SW
BW
VALVES
ASTM-A182 F 304
GATE
D3-1S, D3-1Z
N/A
BALL
N/A
D3-2R, D3-2RF
PLUG
N/A
GLOBE
D3-4R
CHECK
NEEDLE
N/A
D3-6S, D3-6SFM
BUTTERFLY
GAUGE
BOLTING
(Note 5)
GASKETS
D3-5R, D3-5RP
N/A
N/A
D3-9S
N/A
600# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock
Style RW USA ONLY. Carrara Style SWC - ITALY ONLY)
PRESS./TEMP. RATINGS
F
PSIG
REF. ASME B16.5
NOTES:
1. Maximum design conditions: 250 F - 1137 PSIG (Group 2.1)
2. Valve elastomers in contact with process fluids shall be suitable for exposure to
Hydrogen Sulfide, Carbon Dioxide and Aromatics
-20/100
1440
200
1200
250
1137
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
100 of 196
SPECIFICATION D3
TYPE
GATE
BALL
GLOBE
TAG
SIZE
DESCRIPTION
D3-1S
1 and
Smaller
D3-1Z
1 and
Smaller
D3-2R
2 and Larger
D3-2RF
2 and Larger
D3-4R
2 and Larger
ACCEPTABLE
BRANDS
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
AOP
Cameron
DHV
Flow-tek
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
101 of 196
SPECIFICATION D3
TYPE
CHECK
NEEDLE
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
D3-5R
2 - 3
D3-5R
4 and Larger
D3-5RP
2 and Larger
KF Eagle
Norriseal
Tom Wheatley
D3-6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
D3-6SFM
1 and
Smaller
D3-9S
and
Smaller
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
102 of 196
SPECIFICATION D5
CLASS: ANSI 600#
SERVICE: PROCESS FLUID (ASME B31.4)
CS, RF
SIZE
PIPE
1/2
SCH
XXS
3/4
1 1/2
SCH 160
SCH XS
10
12
SCH 40
PE/THD
ASTM-A106 GR B
API 5L X42, SMLS/ ERW-HFI
14
16
18
20
0.5
24
30
0.562 0688
FLANGES
SOCKED WELDED
600# RF, WN
ASTM-A105
ASTM-A694 F65
ASTM-A694 F65
ANCHOR
FLANGES
FITTINGS
600# RF, WN
Design Code ASME B31.4, Temperature Differential per specific application, 1500 psi as standard
design concrete bearing stress
6000# FS
Wall Thickness to Match Pipe
SW / THD
ASTM-A105
6000#
BRANCH
(OLETS)
BW, SMLS
ASTM-A234
GR WPB
ASTM-A860 GR WPHY
3000#
THD
BW
ASTM-A105
GATE
VALVES
BALL
D5-1S, D5-1Z
D5-2S, D5-2SF
D5-2Z, D5-2ZF
PLUG
D5-1R
D5-2R
D5-2RF
N/A
GLOBE
D5-4S, D5-4Z
D5-4R
CHECK
D5-5S, D5-5Z
D5-5R
NEEDLE
D5-6S, D5-6SFM
BUTTERFLY
GAUGE
N/A
N/A
D5-9S
N/A
GASKETS
300# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with CS outer and inner ring (Flexitallic Style CGI, Lamons Style
WRI, Garlock Style RWI USA ONLY. Carrara Style SWC/I - ITALY
ONLY)
NOTES:
1480
200
1350
250
1335
3. Pipe welding joints shall have a hardness in the "HAZ" not higher than 22 HRC.
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
103 of 196
SPECIFICATION D5
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
D5-1S
1 and
Smaller
D5-1Z
1 and
Smaller
D5-1R
2 3
D5-1R
4 and Larger
D5-2S
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled teflon
seats, threaded ends per ASME B1.20.1,
reduced port, lever operated. Fire safe.
Design per API 608. Test per API 598
D5-2Z
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled teflon
seats, socket welded ends per ASME
B1.20.1, reduced port, lever operated. Fire
safe. Design per API 608. Test per API
598
D5-2SF
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
full port, lever operated. Fire safe. Design
per API 608. Test per API 598
D5-2ZF
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled teflon
seats, socket welded ends per ASME
B1.20.1, full port, lever operated. Fire safe.
Design per API 608. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
104 of 196
SPECIFICATION D5
TYPE
TAG
D5-2R
BALL
D5-2RF
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
2 4
6 12
14 and Larger
2 4
6 12
14 and Larger
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
105 of 196
SPECIFICATION D5
TYPE
TAG
SIZE
MLVs
GLOBE
CHECK
DESCRIPTION
ANSI Class 600, Welded End Connections,
Full Port, Fully Welded Body with Rigid
Trunnion Supported Ball, ASTM A350 LF2
Body, ASTM A350 LF2 1 to 3 mil ENP
Ball/Trim & Seat, welded ends, wall
thickness matching pipeline WT, NACE II
Bolting; Peek Seats, shall conform with API
6D and ISO 14313, shall comply with
standards ANSI B16.5 and B16.10, MR-0175/ ISO 15156 (when applicable), Fire-safe
sealing according to API 607, 6FA, and ISO
10497, Independent floating spring loaded
seats for tight seal at low differential
pressures.
Double piston effect seat design, Double
block & bleed design, stem and seat lube
and sealant injection fittings with internal
check valves, double sealing on stem and
bonnet.Tested by API 598.
Shall include: Stem Extension (length
according to specific datasheet), Two
coats of Fenolic Coating, and Two
Transition pipe pieces API-5L X65.
ACCEPTABLE
BRANDS
Cameron
KF
D5-4S
1 and
Smaller
D5-4Z
1 and
Smaller
D5-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
D6-5S
1 and
Smaller
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
106 of 196
SPECIFICATION D5
TYPE
NEEDLE
GAUGE
TAG
SIZE
DESCRIPTION
D6-5Z
1 and
Smaller
D6-5R
2 - 3
D6-5R
4 and Larger
D6-6S
1 and Smaller
D6-6SFM
1 and Smaller
D6-9S
and Smaller
ACCEPTABLE
BRANDS
Newco
Tom Wheatley
Velan
Vogt
Wheatley
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
107 of 196
SPECIFICATION D6
CLASS: ANSI 600# SERVICE: PROCESS HYDROCARBONS / PRODUCED GAS
CS, RF
(HOT OR DRY SERVICE)
SIZE
1/2
3/4
1 1/2
SCH XXS
PIPE
2
SCH
160
10
12
16
18
24
SCH 80
THD
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
600# RF
THD
600# RF, WN
FLANGES
20
ASTM-A105
6000#
FITTINGS
3000#
THD
BW, SMLS
ASTM-A105
6000#
BRANCH
(OLETS)
3000#
ASTM-A234 GR WPB
SCH
160
SCH 80
THD
BW
VALVES
ASTM-A105
GATE
D6-1S
D6-1R
BALL
D6-2S, D6-2SF
D6-2R, D6-2RF
PLUG
N/A
GLOBE
D6-4S
D6-4R
CHECK
D6S
D6R
NEEDLE
D6-6S, D6-6SFM
BUTTERFLY
GAUGE
BOLTING
(Note 3)
GASKETS
N/A
N/A
D6-9S
N/A
NOTES:
1480
200
1350
250
1335
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
108 of 196
SPECIFICATION D6
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
D6-1S
1 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
D6-1R
2 3
D6-1R
4 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
D6-2S
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
reduced port, lever operated. Fire safe.
Design per API 608. Test per API 598
D6-2SF
1 and
Smaller
1440 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1,
full port, lever operated. Fire safe. Design
per API 608. Test per API 598
D6-2R
2 4
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
109 of 196
SPECIFICATION D6
TYPE
BALL
GLOBE
TAG
D6-2RF
D6-4S
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
6 12
14 and Larger
2 4
6 12
14 and Larger
1 and
Smaller
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
110 of 196
SPECIFICATION D6
TYPE
CHECK
NEEDLE
GAUGE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
D6-4R
2 and Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
D6-5S
1 and
Smaller
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
D6-5R
2 - 3
D6-5R
4 and Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
D6-6S
1 and Smaller
D6-6SFM
1 and Smaller
D6-9S
and Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
111 of 196
SPECIFICATION E
CLASS: ANSI 900#
CS, RTJ
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
(Note 3)
10
SCH 80
12
16
20
SCH 120
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
1500# RTJ
SW
900# RTJ, WN
FLANGES
24
ASTM-A105
FITTINGS
6000#
SW
BW, SMLS
ASTM-A105
ASTM-A234 GR WPB
6000#
BRANCH
(OLETS)
SCH 80
SCH 120
SW
BW
VALVES (Note 2)
ASTM-A105
GATE
E1S, E1Z
E1J
BALL
E2J, E2JF
PLUG
N/A
GLOBE
E4S, E4Z
CHECK
E5S, E5Z
NEEDLE
E4J
E5J
N/A
E6S, E6SFM
BUTTERFLY
N/A
GAUGE
E9S
CHOKE
N/A
BOLTING
(Note 5)
GASKETS
N/A
E0J
N/A
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
1500# / 900# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated
(Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)
NOTES:
1. Maximum design conditions: 250 F - 2000 PSIG (Group 1.1)
-20/100
2220
200
2035
250
2000
2. E1S, E2S, E4S, E5S may be used for vent, drain, sample and instrument service Only
3. All welds in WT over 0.750 to be stress relieved per ASME B31.3
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
112 of 196
SPECIFICATION E
TYPE
TAG
GATE
E1S
1 and
Smaller
E1Z
1 and
Smaller
E1J
2 3
E1J
4 and Larger
Class 900#, FS body and bonnet (ASTMA105), Trim 8, HF Stellite seats, RTJ
flanged ends per ASME B16.5, OS&Y,
bolted bonnet, solid wedge gate, enclosed
stem protector. Gear operated. Design per
API 600. Test per API 598
E2S
1 and
Smaller
E2Z
1 and
Smaller
2220 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, socked weld ends per ASME B16.11,
reduced port, lever operated. Fire safe. Test
per API 598
E2SF
1 and
Smaller
2220 PSI @ 100 F, FS body (ASTMA105), 316 SS ball and stem, filled Teflon
seats, threaded ends per ASME B1.20.1, full
port, lever operated. Fire safe. Test per API
598
BALL
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
113 of 196
SPECIFICATION E
TYPE
BALL
GLOBE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
E2ZF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
E2J
2 and Larger
E2JF
2 and Larger
AOP
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
E4S
1 and
Smaller
E4Z
1 and
Smaller
E4J
2 and Larger
Class 900#, FS body and bonnet (ASTMA105), Trim 8, HF Stellite seats, RTJ
flanged ends per ASME B16.5, OS&Y,
bolted bonnet. Hand wheel operated.
Design per API 600. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
114 of 196
SPECIFICATION E
TYPE
TAG
CHECK
E5S
1 and
Smaller
E5Z
1 and
Smaller
E5J
2 - 3
E5J
4 and Larger
Class 900#, FS body and cover (ASTMA105), Trim 8, HF Stellite seats, RTJ
flanged ends per ASME B16.5, horizontal
swing, bolted cover. Body drain NPT.
Design per API 594. Test per API 598
E6S
1 and Smaller
E6SFM
1 and Smaller
GAUGE
E9S
and Smaller
CHOKE
E0J
1 10
NEEDLE
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
Master Flo
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
115 of 196
SPECIFICATION E3
CLASS: ANSI 900#
SS, RTJ
SIZE
3/4
1 1/2
SCH 80S
PIPE
SCH 40S
SCH 80S
BE, SMLS
ASTM-A312 TP 304
FLANGES
900# RTJ
SW
900# RTJ, WN
ASTM-A182 F 304
6000#
SW
BW, SMLS
ASTM-A182 F 304
ASTM-A403 WP 304
FITTINGS
6000#
BRANCH
(OLETS)
SCH 40S
SCH 80S
SW
BW
ASTM-A182 F 304
VALVES
GATE
E3-1S, E3-1Z
N/A
BALL
E3-2J, E3-2JF
PLUG
N/A
GLOBE
E3-4J
N/A
CHECK
N/A
E3-5J, E3-5JP
NEEDLE
E3-6S, E3-6SFM
BUTTERFLY
GAUGE
BOLTING
(Note 5)
GASKETS
N/A
N/A
E3-9S
N/A
PRESS./TEMP. RATINGS
F
PSIG
REF. ASME B16.5
NOTES:
1. Maximum design conditions: 250 F - 1707 PSIG (Group 2.1)
2. Valve elastomers in contact with process fluids shall be suitable for exposure to
Hydrogen Sulfide, Carbon Dioxide and Aromatics
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material
-20/100
2160
200
1800
250
1707
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
116 of 196
SPECIFICATION E3
TYPE
GATE
BALL
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
E3-1S
and
Smaller
E3-1Z
and
Smaller
E3-2J
1 and
Smaller
E3-2JF
1 and
Smaller
E3-2J
2 and Larger
E3-2JF
2 and Larger
Bonney Forge
DSI
Newco
Smith
Velan
Vogt
KF
Nutron
PBV
Velan
WKM
AOP
Cameron
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
117 of 196
SPECIFICATION E3
TAG
GLOBE
E3-4J
1 and
Smaller
Bonney Forge
DSI
Newco
Smith
Velan
Vogt
CHECK
E3-5J
2 - 3
E3-5J
4 and Larger
AOP
Bonney Forge
Crane
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
E3-5JP
2 and Larger
KF Eagle
Norriseal
Tom Wheatley
E3-6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
E3-6SFM
1 and
Smaller
E3-9S
and
Smaller
NEEDLE
GAUGE
SIZE
ACCEPTABLE
BRANDS
TYPE
DESCRIPTION
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
118 of 196
SPECIFICATION E5
CLASS: ANSI 900#
CS, RTJ
SIZE
1/2
3/4
1 1/2
SCH 160
PIPE
(Note 3)
10
SCH 80
12
16
20
24
SCH 120
ASTM-A106 GR B, GALV
1500# RTJ
SW
900# RTJ, WN
FLANGES
SW
BW, SMLS
ASTM-A105
FITTINGS
6000#
BRANCH
(OLETS)
SCH 80
SCH 120
SW
BW
E5-1S
E5-1J
BALL
E5-2S, E5-2SF
E5-2J, E5-2JF
PLUG
N/A
GLOBE
E5-4S
E5-4J
CHECK
E5-5S
E5-5J
NEEDLE
E5-6S, E5-6SFM
N/A
BUTTERFLY
N/A
GAUGE
E5-9S
CHOKE
N/A
BOLTING
(Note 5)
GASKETS
N/A
N/A
N/A
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
1500# / 900# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated
(Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)
NOTES:
-20/100
2220
200
2035
250
2000
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
119 of 196
SPECIFICATION E5
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
E5-1S
1 and
Smaller
Class 1500#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats, graphite
packing, threaded ends per ASME B1.20.1,
OS&Y, bolted bonnet, solid wedge gate.
Hand wheel operated. Design per API 602.
Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
E5-1J
2 3
Class 900#, FS body and bonnet (ASTMASTM-A105), internally coated, Trim 12, HF
Stellite seats, RTJ flanged ends per ASME
B16.5, OS&Y, bolted bonnet, solid wedge
gate. Handwheel operated. Design per API
600. Test per API 598
E5-1J
4 and Larger
Class 900#, FS body and bonnet (ASTMA105), internally coated, Trim 12, HF
stellated seats, RTJ flanged ends per ASME
B16.5, OS&Y, bolted bonnet, solid wedge
gate, enclosed stem protector. Gear
operated. Design per API 600. Test per API
598
Bonney Forge
Crane
DSI
MTS
Newco
Velan
Vogt
Walworth
E5-2S
1 and
Smaller
E5-2SF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
120 of 196
SPECIFICATION E5
TYPE
BALL
GLOBE
CHECK
ACCEPTABLE
BRANDS
TAG
SIZE
DESCRIPTION
E5-2J
2 and Larger
E5-2JF
2 and Larger
E5-4S
1 and
Smaller
Class 1500#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats, threaded
ends per ASME B1.20.1, OS&Y, bolted
bonnet. Hand wheel operated. Design per
API 602. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
E5-4J
2 and Larger
Class 900#, FS body and bonnet (ASTMA105), internally coated, Trim 12, HF
Stellite seats, RTJ flanged ends per ASME
B16.5, OS&Y, bolted bonnet. Hand wheel
operated. Design per API 600. Test per API
598
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
E5-5S
1 and
Smaller
Class 1500#, FS body and cover (ASTMA105), Trim 12, HF Stellite seats, threaded
ends per ASME B1.20.1, horizontal swing,
threaded or bolted cover. Design per API
602. Test per API 598
AOP
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
AOP
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
121 of 196
SPECIFICATION E5
TYPE
TAG
CHECK
E5-5J
2 - 3
Class 900#, FS body and cover (ASTMASTM-A105), internally coated, Trim 12, HF
Stellite seats, RTJ flanged ends per ASME
B16.5, horizontal swing, bolted cover.
Design per API 594. Test per API 598
E5-5J
4 and Larger
Class 900#, FS body and cover (ASTMA105), internally coated, Trim 12, HF
Stellite seats, RTJ flanged ends per ASME
B16.5, horizontal swing, bolted cover. Body
drain NPT. Design per API 594. Test per
API 598
E5-6S
1 and
Smaller
E5-6SFM
1 and
Smaller
E5-9S
3/4 and
Smaller
NEEDLE
GAUGE
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
122 of 196
SPECIFICATION F
CLASS: ANSI 1500# SERVICE: SWEET PROCESS HYDROCARBONS / PRODUCED GAS
CS, RTJ
(HOT OR DRY SERVICE)
SIZE
1/2
3/4
1 1/2
10
12
14
16
18
SCH 160
PIPE
(Note 5)
Calculation required
ASTM-A106 GR B
ASTM-A106 GR B, API-5L GR B
1500# RTJ
FLANGES
20
24
SCH 160
SW
1500# RTJ, WN
ASTM-A105
6000#
SW
BW, SMLS
ASTM-A105
ASTM-A234 GR WPB
FITTINGS
6000#
BRANCH
(OLETS)
SCH 160
SCH 160
Calculation required
SW
BW
VALVES (Note 2)
ASTM-A105
GATE
F1S, F1Z
F1J
BALL
F2J, F2JF
PLUG
N/A
GLOBE
F4S, F4Z
CHECK
NEEDLE
F4J, F4W
F5S, F5Z
F5J
F6S
N/A
N/A
BUTTERFLY
GAUGE
CHOKE
BOLTING
(Note 6)
GASKETS
F9S
N/A
N/A
F0J
N/A
Thread and
dimensions per ASME
B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
1500# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated
(Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)
NOTES:
-20/100
3705
200
3375
250
3328
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
123 of 196
SPECIFICATION F
TYPE
TAG
SIZE
GATE
F1S
1 and
Smaller
F1Z
1 and
Smaller
F1J
2 3
F1J
4 and Larger
F2S
1 and
Smaller
F2Z
1 and
Smaller
F2SF
1 and
Smaller
F2ZF
1 and
Smaller
BALL
ACCEPTABLE
BRANDS
DESCRIPTION
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
124 of 196
SPECIFICATION F
TYPE
BALL
GLOBE
CHECK
TAG
SIZE
DESCRIPTION
F2J
2 and Larger
F2JF
2 and Larger
F4S
1 and
Smaller
F4Z
1 and
Smaller
F4J
2 and Larger
F4W
2 and Larger
F5S
1 and
Smaller
Class 1500# (3705# CWP), FS body (ASTMA105), steel plate cover, Trim 12, HF Stellite
seats, threaded ends per ASME B1.20.1,
horizontal swing, screwed or bolted cover.
Design per API 602. Test per API 598
F5Z
1 and
Smaller
Class 1500# (3705# CWP), FS body (ASTMA105), steel plate cover, Trim 12, HF Stellite
seats, socket weld ends per ASME B16.11,
horizontal swing, screwed or bolted cover.
Design per API 602. Test per API 598
ACCEPTABLE
BRANDS
AOP
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
AOP
Balon
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
125 of 196
SPECIFICATION F
SIZE
ACCEPTABLE
BRANDS
TYPE
TAG
DESCRIPTION
CHECK
F5J
2 - 3
F5J
4 and
Larger
NEEDLE
F6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
GAUGE
F9S
and
Smaller
AGCO
HEX
Swagelok
CHOKE
F0J
1 10
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
Master Flo
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
126 of 196
SPECIFICATION F3
CLASS: ANSI 1500#
SS, RTJ
SIZE
3/4
1 1/2
SCH 160
PIPE
BE, SMLS
ASTM-A312 TP 304
FLANGES
1500# RTJ
SW
1500# RTJ, WN
ASTM-A182 F 304
FITTINGS
BRANCH
(OLETS)
6000#
SW
BW, SMLS
ASTM-A182 F 304
ASTM-A403 WP 304
6000#
SCH 160S
SW
BW
VALVES
ASTM-A182 F 304
GATE
N/A
BALL
F3-2J, F3-2JF
PLUG
N/A
GLOBE
N/A
CHECK
NEEDLE
N/A
F3-6S, F3-6SFM
BUTTERFLY
GAUGE
BOLTING
(Note 5)
GASKETS
F3-5J, F3-5JP
N/A
N/A
F3-9S
N/A
NOTES:
1. Maximum design conditions: 250 F - 2845 PSIG (Group 2.1)
2. Valve elastomers in contact with process fluids shall be suitable for exposure to
Hydrogen Sulfide, Carbon Dioxide and Aromatics
3600
200
3000
250
2845
300
2690
3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS
material
4. Use pipe threaded only for valves connections
5. For studbolts standard lenghts, see ANNEX No. 6
6. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
127 of 196
SPECIFICATION F3
TYPE
BALL
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
F3-2J
1 and
Smaller
F3-2JF
1 and
Smaller
F3-2J
2 and Larger
F3-2JF
2 and Larger
F3-5J
2 - 3
F3-5J
4 and Larger
KF
Nutron
PBV
Velan
WKM
AOP
Cameron
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
AOP
Bonney Forge
Crane
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
128 of 196
SPECIFICATION F3
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
CHECK
F3-5JP
2 and
Larger
KF Eagle
Norriseal
Tom Wheatley
NEEDLE
F3-6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
F3-6SFM
1 and
Smaller
F3-9S
and
Smaller
GAUGE
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
129 of 196
SPECIFICATION F5
CLASS: ANSI 1500#
SERVICE: CORROSIVE PRODUCED OIL / WATER
CS, RTJ
SIZE
PIPE
(Note 5)
1/2
3/4
1
1 1/2
SCH
SCH XXH
160
THRD (Note 3)/PE
10
12
14
16
18
SCH 160
Calculations required
ASTM-A106 GR C
1500# RTJ
SW
1500# RTJ, WN
FLANGES
ASTM-A105
6000#
SW
FITTINGS
ASTM-A105
BW, SMLS
ASTM-A234 GR
WPC
6000#
BRANCH
(OLETS)
20
24
SCH 160
SCH 160
Calculations required
SW
BW
VALVES (Note 2)
ASTM-A105
GATE
F5-1S
F5-1J
BALL
F5-2S, F5-2SF
F5-2J, F5-2JF
PLUG
N/A
GLOBE
F5-4S
CHECK
NEEDLE
F5-4J
F5-5S
F5-5J
F5-6S
N/A
N/A
BUTTERFLY
GAUGE
CHOKE
BOLTING
(Note 6)
GASKETS
F5-9S
N/A
N/A
N/A
N/A
Thread and
dimensions per
ASME B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
1500# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated
(Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)
NOTES:
-20/100
3705
200
3375
250
3328
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
130 of 196
SPECIFICATION F5
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
F5-1S
1 and
Smaller
Class 1500#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats, graphite
packing, threaded ends per ASME B1.20.1,
OS&Y, bolted bonnet, solid wedge gate.
Hand wheel operated. Design per API 602.
Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
F5-1J
2 3
Class 1500#, FS body and bonnet (ASTMASTM-A105), internally coated, Trim 12, HF
Stellite seats, RTJ flanged ends per ASME
B16.5, OS&Y, bolted bonnet, solid wedge
gate. Handwheel operated. Design per API
600. Test per API 598
F5-1J
4 and Larger
Class 1500#, FS body and bonnet (ASTMA105), internally coated, Trim 12, HF
stellated seats, RTJ flanged ends per ASME
B16.5, OS&Y, bolted bonnet, solid wedge
gate, enclosed stem protector. Gear
operated. Design per API 600. Test per API
598
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
F5-2S
1 and
Smaller
F5-2SF
1 and
Smaller
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
131 of 196
SPECIFICATION F5
TYPE
BALL
TAG
DESCRIPTION
ACCEPTABLE
BRANDS
2 to 10
12 and
Larger
2 to 10
12 and
Larger
F5-4S
1 and
Smaller
Class 1500#, FS body and bonnet (ASTMA105), Trim 12, HF Stellite seats,
threaded ends per ASME B1.20.1, OS&Y,
bolted bonnet. Hand wheel operated.
Design per API 602. Test per API 598
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
F5-4J
2 and Larger
Class 1500#, FS body and bonnet (ASTMA105) , Trim 12, HF Stellite seats, RTJ
flanged ends per ASME B16.5, OS&Y,
bolted bonnet. Hand wheel operated.
Design per API 600. Test per API 598
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
F5-2J
F5-2JF
GLOBE
SIZE
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
132 of 196
SPECIFICATION F5
TYPE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
CHECK
F5-5S
1 and
Smaller
Class 1500#, FS body and cover (ASTMA105), Trim 12, HF Stellite seats,
threaded ends per ASME B1.20.1,
horizontal swing, threaded or bolted cover.
Design per API 602. Test per API 598
AOP
Bonney Forge
DHV
DSI
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
CHECK
F5-5J
2 - 3
Class 1500#, FS body and cover (ASTMA105), Trim 12, HF Stellite seats, RTJ
flanged ends per ASME B16.5, horizontal
swing, bolted cover. Design per API 594.
Test per API 598
F5-5J
4 and Larger
Class 1500#, FS body and cover (ASTMA105), Trim 12, HF Stellite seats, RTJ
flanged ends per ASME B16.5, horizontal
swing, bolted cover. Body drain NPT.
Design per API 594. Test per API 598
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
F5-6S
1 and
Smaller
F5-6SFM
1 and
Smaller
F5-9S
3/4 and
Smaller
NEEDLE
GAUGE
AGCO
Balon
KF
NOSHOK
Swagelok
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
133 of 196
SPECIFICATION G
CLASS: ANSI 1500#
CS, RTJ
SIZE
1/2
3/4
1-1/2
10
12
16
20
24
SCH 160
SCH 160
PIPE
Calculation required
ASTM-A106 GR B, GALV
1500# RTJ
SW
1500# RTJ, WN
ASTM-A105, GALV
6000#
SW
BW, SMLS
FLANGES
FITTINGS
ASTM-A105, GALV
6000#
BRANCH
(OLETS)
Calculation required
SW
BW
ASTM-A105
VALVES (Note 7)
GATE
BALL
Use Ball
G2S, G2SF, G2Z, G2ZF
PLUG
N/A
GLOBE
G4S, G4Z
CHECK
NEEDLE
BOLTING
(Note 8)
GASKETS
G4J
G5S, G5Z
G5J
G6S
N/A
N/A
BUTTERFLY
GAUGE
G2J, G2JF
G9S
N/A
Thread and
dimensions per ASME
B16.5
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
1500# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated
(Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)
NOTES:
-20/100
3705
200
3395
250
3332
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
134 of 196
SPECIFICATION G
TYPE
BALL
GLOBE
TAG
SIZE
DESCRIPTION
G2S
1-1/2 and
Smaller
G2Z
1-1/2 and
Smaller
G2SF
1-1/2 and
Smaller
G2ZF
1-1/2 and
Smaller
G2J
2 and
Larger
G2JF
2 and
Larger
G4S
1-1/2 and
Smaller
Class 1500# (3705# CWP), FS body (ASTMA105), and bonnet, Trim 12, HF Stellite
seats, threaded ends per ASME B1.20.1,
OS&Y, bolted bonnet. Hand wheel operated.
Design per API 602. Test per API 598
G4Z
1-1/2 and
Smaller
Class 1500# (3705# CWP), FS body (ASTMA105), and bonnet, Trim 12, HF Stellite
seats, socket weld ends per ASME B16.11,
OS&Y, bolted bonnet. Hand wheel operated.
Design per API 602. Test per API 598
ACCEPTABLE
BRANDS
KF
Nutron
PBV
Velan
WKM
AOP
Cameron
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
135 of 196
SPECIFICATION G
ACCEPTABLE
BRANDS
TYPE
TAG
SIZE
GLOBE
G4J
2 and Larger
Class 1500#, FS body and bonnet (ASTMA105), internally coated, Trim 12, HF Stellite
seats, RTJ flanged ends per ASME B16.5,
OS&Y, bolted bonnet. Hand wheel operated.
Design per API 600. Test per API 598
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
G5S
1-1/2 and
Smaller
Class 1500# (3705# CWP), FS body (ASTMA105), Trim 12, HF Stellite seats, threaded
ends per ASME B1.20.1, horizontal swing,
screwed or bolted cover. Design per API 602.
Test per API 598
Bonney Forge
DHV
KF Eagle
Tom Wheatley
Velan
G5Z
1-1/2 and
Smaller
Class 1500# (3705# CWP), FS body (ASTMA105), Trim 12, HF Stellite seats, socket
weld ends per ASME B16.11, horizontal swing,
screwed or bolted cover. Design per API 602.
Test per API 598
G5J
2 - 3
Class 1500#, FS body and cover (ASTMA105), internally coated, Trim 12, HF Stellite
seats, RTJ flanged ends per ASME B16.5,
horizontal swing, bolted cover. Design per API
594. Test per API 598
G5J
4 and Larger
Class 1500#, FS body and cover (ASTMA105), internally coated, Trim 12, HF Stellite
seats, RTJ flanged ends per ASME B16.5,
horizontal swing, bolted cover. Body drain
NPT. Design per API 594. Test per API 598
NEEDLE
G6S
1 and
Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
GAUGE
G9S
and
Smaller
AGCO
HEX
Swagelok
CHECK
DESCRIPTION
AOP
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
136 of 196
SPECIFICATION H
CLASS: ANSI 2500#
SERVICE: PRODUCED GAS (HOT OR DRY SERVICE)
CS, RTJ
SIZE
1/2
3/4
1 1/2
SCH XXS
PIPE
(Note 2)
9000#
N/A
16
18
1.500
1.875
2.000
2.250
2.500
ASTM-A105
GATE
14
SW
SW
12
9000#
BRANCH
(OLETS)
10
BE, SMLS/ERW-HFI
SW
FITTINGS
1.00 1.250
FLANGES
SCH XXS
BW, SMLS
ASTM-A234 GR WPC, ASTM-A860 WPHY-60
Quenched & Tempered
1.00 1.250 1.500 1.875 2.000 2.250
2.500
BW
ASTM-A105
VALVES
BALL
H1J
H2X1
H2X2
H2S
H2J, H2JF
PLUG
N/A
GLOBE
N/A
CHECK
NEEDLE
N/A
BOLTING
(Note 6)
GASKETS
N/A
N/A
BUTTERFLY
GAUGE
H5J
H6S
H9S
N/A
NOTES:
1. Maximum design conditions: 250 F - 6160 PSIG (Group 1.2)
2. Threaded piping and valves (3/4 max) are allowed on instrument connections only
A flanged isolation valve is to be installed upstream of the threaded connections
Threaded piping to be XXS (3/4 max)
PRESS./TEMP. RATINGS
F
PSIG
REF. ASME B16.5
-20/100
6250
200
250
6250
6160
3. The MDMT must be verified for all ASTM-106 B/C, API-5L X60, ASTM-A105 and
ASTM-A234 WPC materials with a wall thickness greater than 0.500.
4. Use pipe threaded only for valves connections
5. Vents and drains shall be 2 flanged.
6. For studbolts standard lenghts, see ANNEX No. 6
7. For ANSI Pipe Schedules, see ANNEX No. 7
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
137 of 196
SPECIFICATION H
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
GATE
H1J
2 and Larger
Bonney Forge
Edwards
KF
BALL
H2S
Alco
FMC
Jamesbury
Velan
H2X1
1 1
H2X2
1 1
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
138 of 196
SPECIFICATION H
TYPE
BALL
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
H2J
2 and Larger
H2JF
2 and Larger
H5J
2 - 3
H5J
4 and Larger
Cameron
Grove
KF
Nutron
PBV
TK
Velan
KF
Tom Wheatley
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
139 of 196
SPECIFICATION H
TYPE
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
NEEDLE
H6S
1 and Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
GAUGE
H9S
and Smaller
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
140 of 196
SPECIFICATION H3
CLASS: ANSI 2500#
SS, HUB
SIZE
1/2
3/4
SCH XXS
PIPE
PE
0.750
1.125
BE, SMLS
ASTM-A312 TP 304
HUBS
Size
1 GR 4
1 GR 5
1 GR 11
2 GR 14
3 GR 23
4 GR 31
6 GR 46
PN
53437D 53447D
53234D
52442D
52824D
53848D
52854D
55891D
2 -3
Desc.
GRAYLOC HUB, BW
Mat.
CLAMPS
ASTM-A182 F 316
Size
PN
50163WB
48501WB
Desc.
SW
BW, SMLS
ASTM-A182 F 304
ASTM-A403 WP 304
N/A
BALL
VALVES
A90059-6WB
ASTM-A182 F 316
9000#
GATE
H3-2GF
H3-2G, H3-2GF
PLUG
N/A
GLOBE
N/A
CHECK
H3-5G
NEEDLE
H3-6S
H3-5G, H3-5GP
N/A
N/A
BUTTERFLY
GAUGE
H3-9S
BOLTING
(Note 3)
SEALS
Mat.
FITTINGS
N/A
Thread and dimensions
per GRAYLOC
Specifications
Bolts: ASTM-A193 GR B8 Cl 1
Nuts: ASTM-A194 GR 8, Heavy Hex Nuts
Size
11
14
23
31
46
PN
51267N
51268N
51270N
51272N
51284N
51276N
66225N
Desc.
Mat.
NOTES:
1. Maximum design conditions: 250 F - 4910 PSIG
2. Valve elastomers in contact with process fluids shall be suitable for exposure to wet
Carbon Dioxide.
3. For ANSI Pipe Schedules, see ANNEX No. 7
PRESS./TEMP. RATINGS
F
PSIG
REF. ASME B16.5
-20/100
6000
200
5160
250
4910
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
141 of 196
SPECIFICATION H3
TYPE
BALL
CHECK
TAG
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
H3-2GF
1 and
Smaller
FMC
Nutron
TK
Velan
H3-2G
2 and Larger
Cameron
FMC
Grove
KF
PBV
TK
Velan
H3-2GF
2 and Larger
H3-5G
1 and
Smaller
2 - 3
4 and Larger
KF
Tom Wheatley
Wheatley
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
142 of 196
SPECIFICATION H3
TYPE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
CHECK
H3-5GP
1 and Larger
Bonney Forge
Daniel
KF
Norriseal
NEEDLE
H3-6S
1 and Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
GAUGE
H3-9S
and Smaller
AGCO
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
143 of 196
SPECIFICATION H4
CLASS: ANSI 2500#
DUPLEX, HUB
SIZE
3/4
1 1/2
2 1/2
SCH 80S
PIPE
160
PE
BE
ASTM-A790 S31803 Duplex, SMLS (P 10H G 1)
HUBS
CLAMPS
Size
N/A
PN
N/A
Desc.
Mat.
Size
N/A
PN
N/A
Desc.
Mat.
VALVES
FITTINGS
BW, SMLS
GATE
N/A
BALL
H4-2GF
PLUG
N/A
GLOBE
N/A
CHECK
N/A
NEEDLE
N/A
BUTTERFLY
N/A
GAUGE
N/A
BOLTING
(Note 3)
SEALS
SW, SMLS
Bolts: ASTM-A193 GR B8 CL 1
Size
N/A
PN
N/A
Desc.
Mat.
NOTES:
1. Maximum design conditions: 200 F - 6200 PSIG (Group 2.8)
2. Threaded joints shall be used only for instrumentation, vent, drains and similar purposes,
and shall be not larger than DN 15 (NPS )
PRESS./TEMP.
RATINGS
F
PSIG
REF. ASME B16.5
-20/100
200
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
6250
6200
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
144 of 196
SPECIFICATION H4
TYPE
BALL
TAG
H4-2GF
H4-2G
SIZE
ACCEPTABLE
BRANDS
DESCRIPTION
1 and
Smaller
ALCO HI-TEK
2 6
ALCO HI-TEK
2 6
ALCO HI-TEK
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
145 of 196
SPECIFICATION J
CLASS: ANSI 150#
SERVICE: INSTRUMENT AIR / UTILITY AIR / UTILITY WATER
CS, RF
SIZE
1/2
3/4
SCH 160
PIPE
(Note 2)
3 1/2
10
SCH 80
12
16
ASTM-A53 GR B, API-5L GR B
150# RF
THD
150# RF, WN
ASTM-A105, GALV
ASTM-A105
3000#
FITTINGS
24
STD
THD, SMLS
FLANGES
20
THD
BW, SMLS
ASTM-A105, GALV
ASTM-A234 GR WPB
STD
BRANCH
(OLETS)
N/A
BW
VALVES
ASTM-A105
GATE
J1S
J1R
BALL
J2S, J2SF
J2R, J2RF
PLUG
N/A
GLOBE
J4S
J4R
CHECK
J5S
J5R
NEEDLE
J6S, J6SFM
BUTTERFLY
GAUGE
BOLTING
(Note 3)
GASKETS
N/A
N/A
J7RL, J7RW
J9S
Bolts: ASTM-A193 GR B7, Fluorocarbon Coated
Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts
150# RF, Thk 1/8, 316 SS Spiral Wound, filler material: Flexible Graphite
(FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock
Style RW USA ONLY. Carrara Style SWC - ITALY ONLY)
NOTES:
285
200
260
250
245
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
146 of 196
SPECIFICATION J
TYPE
GATE
BALL
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
J1S
3 and
Smaller
Bonney Forge
DSI
Newco
Smith
Velan
Vogt
J1R
3 4
J1R
6 and Larger
Bonney Forge
Crane
DHV
DSI
MTS
Newco
Velan
Vogt
Walworth
J2S
3 and
Smaller
J2SF
3 and
Smaller
J2R
3 6
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
AOP
Balon
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
Warren
WKM
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
TK
WKM
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
147 of 196
SPECIFICATION J
TYPE
BALL
GLOBE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
J2RF
3 6
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
Velan
TK
WKM
J2R
8 and Larger
J2RF
8 and Larger
AOP
Balon
Cameron
DHV
Grove
KF
MTS
Nibco
Nutron
PBV
Quadrant
TK
Velan
WKM
J4S
3 and
Smaller
Bonney Forge
DHV
DSI
Newco
Smith
Velan
Vogt
J4R
3 and
Larger
Bonney Forge
Crane
DSI
MTS
Newco
Powell
Velan
Walworth
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
148 of 196
SPECIFICATION J
TAG
CHECK
J5S
3 and
Smaller
Class 800# (1975# CWP), FS body (ASTMA105), steel plate cover, Trim 8, threaded
ends per ASME B1.20.1, horizontal swing,
screwed or bolted cover. Design per API 602.
Test per API 598
AOP
Balon
Bonney Forge
DSI
DHV
KF Eagle
Newco
Tom Wheatley
Velan
Vogt
Wheatley
J5R
J5R
4 and Larger
AOP
Balon
Bonney Forge
Crane
DHV
DSI
KF Eagle
MTS
Newco
PBV
Tom Wheatley
Velan
Walworth
Wheatley
J6S
1 and
Smaller
J6SFM
1 and
Smaller
J7RL
3 and
Larger
NEEDLE
BUTTERFLY
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
TYPE
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
AGCO
Balon
KF
NOSHOK
Swagelok
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
Velan
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
149 of 196
SPECIFICATION J
TYPE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
BUTTERFLY
J7RW
3 and
Larger
Bray
Center Line
Demco
Flowseal
Keystone
KF
MTS
Norris
Quadrant
Velan
GAUGE
J9S
and Smaller
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
150 of 196
SPECIFICATION L
CLASS: ANSI 150#
CS, FF
SIZE
SERVICE: FIREWATER
1/2
3/4
SCH 160
PIPE
(Note 2)
1 1/2
10
SCH 80
12
16
20
24
STD
THD, GALV
ASTM-A106 GR B
150# FF
THD
150# FF, WN
FLANGES
ASTM-A105, GALV
ASTM-A105
3000#
THD
BW, SMLS
ASTM-A105, GALV
ASTM-A234 GR WPB
FITTINGS
STD
BRANCH
(OLETS)
N/A
GATE
L1S
L1F
BALL
L2S
Use Gate
BW
VALVES
ASTM-A105
PLUG
N/A
GLOBE
L4S
L4F
CHECK
L5S
L5W
NEEDLE
L6S
BUTTERFLY
GAUGE
BOLTING
(Note 3)
GASKETS
N/A
N/A
L9S
L7FL, L7FW
N/A
NOTES:
285
200
260
250
245
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
151 of 196
SPECIFICATION L
TYPE
TAG
SIZE
DESCRIPTION
ACCEPTABLE
BRANDS
NFPA Member
Brands
2 1/2"
L1S
3 and Smaller
Crane
DSI
Fairbanks
Velan
Vogt
Walworth
L1F
Crane
DSI
Fairbanks
Velan
Walworth
L1F
6 and Larger
BALL
L2S
3 and Smaller
AOP
Jamesbury
Nibco
Quadrant
GLOBE
L4S
3 and Smaller
Crane
DSI
Fairbanks
Powell
Smith
Vogt
L4F
4 and Larger
Crane
DSI
Fairbanks
Velan
Walworth
ANGLE
VALVE
GATE
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
152 of 196
SPECIFICATION L
ACCEPTABLE
BRANDS
TYPE
TAG
SIZE
DESCRIPTION
CHECK
L5S
3 and Smaller
Bonney Forge
Crane
DSI
Fairbanks
Nibco
KF Eagle
Wheatley
L5W
4 and larger
Crane
KF Eagle
Mueller
NEEDLE
L6S
1 and Smaller
AGCO
Balon
KF
NOSHOK
Swagelok
BUTTERFLY
L7FL
4 and Larger
L7FW
4 and Larger
Bray
Center Line
Demco
Flow seal
Keystone
KF
Norris
L9S
and Smaller
GAUGE
AGCO
AOP
HEX
Swagelok
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
153 of 196
ANNEXES
ANNEX No. 1: STRAINERS
ANNEX No. 2: ACCESS FITTINGS
ANNEX No. 3: INSULATING KITS
ANNEX No. 4: BLEED RINGS
ANNEX No. 5: GASKETS
ANNEX No. 6: BOLTS DIMENSIONS
ANNEX No. 7: ANSI PIPE SCHEDULES (CS & SS) [in]
ANNEX No. 8: INTERNAL COATING
ANNEX No. 9: API FLANGES
ANNEX No. 10: U-BOLTS DIMENSIONS
ANNEX No. 11: FBE EXTERNAL COATING
ANNEX No. 12: OVAL & OCTOGONAL RINGS
ANNEX No. 13: ACRYLIC THREAD SEALANT DATA SHEETS
ANNEX No. 14: GLOSSARY
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
154 of 196
DESCRIPTION:
1. Type of Strainer Required
2. Line Size: 3/4 36
3. Mating Flange Rating: 150# - 1500#
4. Flange face type: RF, FF, RTJ
5. Length Required. If necessary
6. Material of Construction
7. Wire Mesh & Material if required
Example:
TEMPORARY CONE STRAINERS FOR 10" LINE SIZE, 300#, FLANGE TYPE RF WITH 20 MESH (1/32"
OPENINGS). CS BODY. 316 SS MESH. MODEL: WEAMCO TYPE CWO
A1.2
STRAINERS TYPE Y
DESCRIPTION:
1. Type of Strainer Required
2. Line Size: 3/4 36
3. Mating Flange Rating: 150# - 1500#
4. Flange face type: RF, FF, RTJ
5. Mesh (Screen)
6. Material of Construction
7. Body drain
Example:
STRAINER, TYPE "Y", 10" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN
(MESH 12), CS BODY. 2" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC,
TITAN
A1.3
DESCRIPTION:
1. Type of Strainer Required
2. Line Size: 3/4 36
3. Mating Flange Rating: 150# - 1500#
4. Flange face type: RF, FF, RTJ
5. Mesh (Screen)
6. Material of Construction
7. Body drain
Example:
BASKET STRAINER, 2" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN
(MESH 12), 316 SS BODY. 1" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC,
TITAN
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
155 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
156 of 196
DESCRIPTION:
ROHRBACK COSASCO MODEL 57. TWO-INCH SYSTEM ACCESS FITTING ASSEMBLIES WITH
SOLID PLUG, NON TEE BODY STYLE. MODEL: 57-141-0-72-S31600-1
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
157 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
158 of 196
DESCRIPTION:
2" INSULATING KIT, ANSI 300# RF, GPT VCS TYPE, G-10 GASKET, TEFLON (SPRING-ENERGIZED)
SEAL, WITH COMPLETE SET OF GRE INSULATING FULL LENGHT SLEEVES, GRE INSULATING
WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF).
A3.2
DESCRIPTION:
2" INSULATING KIT, ANSI 300# RF, GPT VCS TYPE, G-11 GASKET, PTFE (SPRING-ENERGIZED)
SEAL, WITH COMPLETE SET OF NOMEX INSULATING FULL LENGHT SLEEVES, G-3 INSULATING
WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF).
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
159 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
160 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
161 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
162 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
163 of 196
A FOR RF [in]
NPS
[in]
B FOR
RF
[in]
CL150
CL300
CL600
CL900
CL1500
CL150
CL300
CL600
CL900
CL1500
1
1 1/2
2
2 1/2
3
4
6
8
10
12
1 1/4
1 7/8
2 5/16
2 3/4
3 5/8
4 5/8
6 3/4
8 1/2
10 5/8
12 3/4
2 1/2
3 1/4
4
4 3/4
5 1/4
6 3/4
8 5/8
10 7/8
13 1/4
16
2 3/4
3 5/8
4 1/4
5
5 3/4
7
9 3/4
12
14 1/8
16 1/2
2 3/4
3 5/8
4 1/4
5
5 3/4
7 1/2
10 3/8
12 1/2
15 5/8
17 7/8
3
3 3/4
5 1/2
6 3/8
6 1/2
8
11 1/4
14
17
19 1/2
3
3 3/4
5 1/2
6 3/8
6 3/4
8 1/8
11
13 3/4
17
20 3/8
2
3
4
5
6
9
12
18
24
37
2
3
5
6
8
11
19
27
32
43
2
3
5
6
8
13
23
31
47
57
3
4
9
11
11
16
30
44
62
77
3
4
9
11
12
16
28
42
62
89
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
164 of 196
DESCRIPTION:
3" GASKET, 300# RF, THK 1/8, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE
(FG) WITH CS OUTER RING. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC STYLE CG, LAMONS
STYLE WR, GARLOCK STYLE RW USA ONLY. CARRARA STYLE SWC ITALY ONLY)
A5.2
DESCRIPTION:
3" GASKET, 300# RF, THK 1/8, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE
(FG) WITH SS OUTER RING. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC STYLE CG, LAMONS
STYLE WR, GARLOCK STYLE RW USA ONLY. CARRARA STYLE SWC ITALY ONLY)
A5.3
DESCRIPTION:
3" GASKET, 150# FF, THK 1/8", COMP. NON-ASBESTOS, SYNTHETIC FIBER WITH NBR BINDER.
DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC, LAMONS, GARLOCK - USA ONLY)
A5.4
DESCRIPTION:
3" GASKET, 1500# / 900# RTJ, OCTAGONAL RING, SOFT IRON MATERIAL, CADMIUM PLATED
COATED (FLEXITALLIC, LAMONS OR WOLAR USA ONLY. CARRARA ITALY ONLY)
A5.5
DESCRIPTION:
3" GASKET, 1500# / 900# RTJ, OVAL RING, STAINLESS STEEL MATERIAL, ANNEALED (FLEXITALLIC,
LAMONS OR WOLAR USA ONLY. CARRARA ITALY ONLY)
A5.6
DESCRIPTION:
3" GASKET, 300# RF, RING 1/8, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE
(FG) WITH CS OUTER AND INNER RING (FLEXITALLIC STYLE CGI, LAMONS STYLE WRI, GARLOCK
STYLE RWI USA ONLY. CARRARA STYLE SWC/I ITALY ONLY)
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
165 of 196
2
2
2
3
3
3
3
3
4
4
4
5
5
5
6
6
7
7
7
7
8
9
SIZE
"
"
1"
1 "
2"
2 "
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
SERIES A
26"
28
30
36
42
4
4
4
4
8
8
8
8
12
12
16
16
20
20
24
24
24
28
28
28
32
36
1
1
1
1
1
1
1
1
1
1
2
1
2
3
3
3
3
4
4
4
5
5
6
7
7
7
8
8
9
10
11
11
13
14
3
3
3
4
4
5
5
6
7
7
8
9
9
10
11
11
13
LG
1
1
1
1
1
1
1
1
1
DIAM
LG
4
4
4
4
8
8
8
8
12
12
16
20
20
20
20
24
24
# BOLTS
DIAM
"
"
1"
1 "
2"
2 "
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
SIZE
# BOLTS
900# RF/RTJ
SIZE
600# RF
LG
1
1
1
1
1
1
1
1
1
1
DIAM
4
4
4
4
4
4
4
8
8
8
12
12
12
16
16
20
20
24
28
28
32
36
# BOLTS
LG
SERIES A
26"
28
30
36
42
DIAM
"
"
1"
1 "
2"
2 "
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
300# RF
# BOLTS
SIZE
150# RF
"
"
1"
1 "
2"
2 "
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4
4
4
4
8
8
8
8
12
12
16
20
20
20
20
20
20
1
1
1
1
1
1
1
1
2
2
4
4
5
5
6
6
6
7
8
9
9
10
11
11
13
14
18
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
166 of 196
4
4
5
5
6
6
7
8
10
13
13
15
17
18
21
22
25
LG
1
1
1
1
1
1
2
2
2
2
3
3
DIAM
LG
4
4
4
4
8
8
8
8
12
12
12
16
16
16
16
16
16
# BOLTS
DIAM
"
"
1"
1 "
2"
2 "
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
SIZE
# BOLTS
2500# RTJ
SIZE
1500# RTJ
"
"
1"
1 "
2"
2 "
3"
4"
6"
8"
10"
12"
4
4
4
4
8
8
8
8
8
12
12
12
1
1
1
1
1
2
2
2
2
5
5
5
7
7
8
9
10
14
15
20
22
SIZE
# BOLTS
DIAM
LG
2500# HUB
1/2"
3/4"
1"
1 1/2"
2"
3"
4"
6"
4
4
4
4
4
4
4
4
1/2
1/2
1/2
5/8
3/4
3/4
7/8
1 1/8
3 1/2
3 1/2
3 1/2
5
5 1/4
6
7
9 3/8
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
167 of 196
40
0.083
0.109
0.083
0.083
PIPE
SIZE
OD
10
10S
0.840
0.083
1.050
20
30
XS &
80S
80
0.109
0.147
0.113
0.113
60
100
120
XXS
160
0.147
0.294
0.188
0.154
0.154
0.308
0.219
1.315
0.109
0.109
0.133
0.133
0.179
0.179
0.358
0.250
1.660
0.109
0.109
0.140
0.140
0.191
0.191
0.382
0.250
1.900
0.109
0.109
0.145
0.145
0.200
0.200
0.400
0.281
2.375
0.109
0.109
0.154
0.154
0.218
0.218
0.436
0.344
2.875
0.120
0.120
0.203
0.203
0.276
0.276
0.552
0.375
3.500
0.120
0.120
0.216
0.216
0.300
0.300
0.600
0.438
4.500
0.120
0.120
0.237
0.237
0.337
0.337
0.438
0.674
0.531
6.625
0.134
0.134
0.203
0.280
0.280
0.432
0.432
0.562
0.684
0.719
8.625
0.148
0.148
0.250
0.277
0.322
0.322
0.406
0.500
0.500
0.594
0.719
0.875
0.906
10
10.75
0.165
0.165
0.250
0.307
0.365
0.365
0.500
0.500
0.5940
0.719
0.844
1.000
1.125
12
12.75
0.180
0.180
0.250
0.330
0.375
0.406
0.562
0.500
0.688
0.844
1.000
1.000
1.312
14
14.0
0.188
0.250
0.312
0.375
0.375
0.438
0.594
0.500
0.750
0.938
1.094
1.406
16
16.0
0.188
0.250
0.312
0.375
0.375
0.500
0.656
0.500
0.844
1.031
1.219
1.594
18
18.0
0.188
0.250
0.312
0.438
0.375
0.562
0.750
0.500
0.938
1.156
1.375
1.781
20
20.0
0.219
0.250
0.375
0.500
0.375
0.594
0.812
0.500
1.031
1.281
1.500
1.969
22
22.0
0.250
0.375
0.500
0.375
0.875
0.500
1.125
1.375
1.625
2.125
24
24.0
0.250
0.375
0.562
0.375
0.969
0.500
1.219
1.531
1.812
2.344
26
26.0
0.312
0.500
0.625
0.375
28
28.0
0.312
0.500
0.625
0.375
30
30.0
0.312
0.500
0.625
0.375
36
36.0
0.312
0.500
0.625
0.375
42
42.0
0.375
0.375
0.500
0.500
48
48.0
0.375
0.375
0.500
0.500
0.250
0.312
0.688
0.281
0.500
0.500
0.750
0.500
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
168 of 196
PLASITE 7159
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
169 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
170 of 196
ENDURO BOND
ENDURO-BONDTM Properties
An exceptional group of engineered thermal polymers allowing the process engineer greater versatility with
a single material. ENDURO-BONDTM is characterized by flexibility and good retention of mechanical
properties. ENDURO-BONDTM meets the demands of the modern materials and corrosion engineer.
Dimensional Stability
Low coefficients of thermal expansion
Low creep
Low water absorption
High strength
High strength/weight ratio
Thermal Properties
characteristics
temperatures greater than 500F
Mechanical Properties
Wear resistant, excellent
Chemical Resistance
Stability at elevated temperatures.
Resistant to a broad range of solvents, mineral and organic
acids, alkalis and corrosive waters.
Processing
Highly predictable shrinkage for close tolerances
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
171 of 196
2 9/16
FLANGE, WELDING NECK, API 6A TYPE 6B, 2 9/16" DIAM, 3000#, SCH 80, CS ASTM A105, RTJ, RING
27, DIMENSIONS PER API 6A / ASME B16.5
FLANGE, WELDING NECK, API 6A TYPE 6B, 2 9/16" DIAM, 5000#, SCH 80, CS ASTM A105, RTJ, RING
27, DIMENSIONS PER API 6A / ASME B16.5
RING FLANGE API, OCTOGONAL RING R27, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 2
9/16" RTJ (FLEXITALLIC OR LAMONS)
BOLTS, STUD, 1" DIAM x 7" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM
A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER
ASME B16.5
3 1/8
FLANGE, WELDING NECK, API 6A TYPE 6B, 3 1/8" DIAM, 3000#, SCH 80, CS ASTM A105, RTJ, RING
31, DIMENSIONS PER API 6A / ASME B16.5
FLANGE, WELDING NECK, API 6A TYPE 6B, 3 1/8" DIAM, 5000#, SCH 80, CS ASTM A105, RTJ, RING
35, DIMENSIONS PER API 6A / ASME B16.5
RING FLANGE API, OCTOGONAL RING R31, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 3
1/8" RTJ (FLEXITALLIC OR LAMONS)
BOLTS, STUD, 1 1/8" DIAM x 6 1/2" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS,
CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND
DIMENSIONS PER ASME B16.5
4 1/16
FLANGE, WELDING NECK, API 6A TYPE 6B, 4 1/16" DIAM, 3000#, SCH 40 (80), CS ASTM A105, RTJ,
RING 37, DIMENSIONS PER API 6A / ASME B16.5
FLANGE, WELDING NECK, API 6A TYPE 6B, 4 1/16" DIAM, 5000#, SCH 40 (80), CS ASTM A105, RTJ,
RING 39, DIMENSIONS PER API 6A / ASME B16.5
RING FLANGE API, OCTOGONAL RING R37, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 4
1/16" RTJ (FLEXITALLIC OR LAMONS)
BOLTS, STUD, 1 1/8" DIAM x 7 1/2" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS,
CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND
DIMENSIONS PER ASME B16.5
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
172 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
173 of 196
OD PIPE
[in]
LONG U
[mm]
DIAM U
[in]
LONG THD
[mm]
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
6
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.500
6.625
2 3/4
2 3/4
2 3/4
2 7/8
3
3 1/4
3 3/4
4
4 1/2
6 1/8
173
182
192
212
228
260
305
343
408
575
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
5/8
60
60
60
60
65
65
75
75
75
100
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
174 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
175 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
176 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
177 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
178 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
179 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
180 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
181 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
182 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
183 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
184 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
185 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
186 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
187 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
188 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
189 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
190 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
191 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
192 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
193 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
194 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
195 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.
Department:
GERENCIA DE PROYECTOS
Code No.:
43B011-CPT-50-SP-004
Revision:
Page No.:
196 of 196
The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.