You are on page 1of 2

VPAC-1000F INTEGRATED WIDE BANDWIDTH IR

DETECTOR/PREAMPLIFIER MODULE

Features
- Modern
- Compact
- Wide bandwidth
- Precise I-V conversion
- Detector biasing possibility up to +800mV
- Low current noise
- Co-operation with high resistance detectors
- Effective cooling for 3-stage thermocoolers

Applications
- Laser technology
- Fast laser pulse measurement
- Telemetry
- Sighting systems
- Free space optics (l=10µm, transfer Gb/s)

Description
Infrared detector is integrated with AC coupled transimpedance preamplifier. High performance is achieved through individual matching of the IR
detector to the preamplifier and good heat dissipation management.

Preamplifier Specification
Parameter Symbol Units Value Conditions, Remarks
Input Noise Current in pA/√Hz 5 fo=100kHz
Input Noise Voltage en nV/√Hz 1.1 fo=100kHz
Input Capacitance Ci pF 1
Detector Bias Voltage Vdet mV ≤800 optimised for each detector
Low Cut-Off Frequency flo kHz 10 3 dB

High Cut-Off Frequency fhi GHz 1 3 dB


3
Transimpedance Ki V/A 8.5·10 RL=50 Ω
Output Voltage Swing Vout V ±0.8 RL=50 Ω
Output Impedance Rout Ω 50
Supply Voltage Vsup V +12,-5
Supply Current Isup mA +60, -20

Electrical characteristics @ Ta=20ºC

ABSOLUTE MAXIMUM RATINGS RECOMMENDED ACCESSORIES


Parameter Value Model Description
Maximum Continous Optical Power *15 W/cm2 STCC-04 Thermoelectric Cooler Controller
Maximum Optical Power of Pulses Shorter Than 1µs *1 MW/cm2 PPS-02 Preamplifier Power Supply

Storage temperature range -40ºC to


+80ºC
Operating temperature range -20ºC to
+30ºC
*For non-immersed detectors

Stresses exceeding above listed values may cause permanent damage to the device. This is a stress rating only, and functional operation of the
device at these or any other conditions exceeding those indicated in the operational section of this application is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.

Vigo System S.A. Sales Office: 129/133 Poznanska St., Ozarow Mazowiecki - Poland, ph: +48 22 733 54 21, fax: +48 22 665 21 55, email: info@vigo.com.pl
Dimensions

Vigo System S.A. Sales Office: 129/133 Poznanska St., Ozarow Mazowiecki - Poland, ph: +48 22 733 54 21, fax: +48 22 665 21 55, email: info@vigo.com.pl

You might also like