Professional Documents
Culture Documents
COIMBATORE 641659
DEPARTMENT OF AERONAUTICAL ENGINEERING
INTERNAL TEST II
SUB: SOLID MECHANICS
Timings: 1:30HRS
YEAR/SEM: II/III
Max. Marks: 50MARKS
PART A
7 * 2 = 14 MARKS
Answer All the Questions
1.
2.
3.
4.
5.
6.
7.
3 *12 = 36 MARKS
1. A vertical round steel rod 2m long is securely held at its upper end. A weight can slide
freely on the rod and its fall is arrested by a stop provided at the lower end of the rod.
When the weight falls from a height of 2.5 cm above the stop, the maximum stress
reached in the rod is estimated to be 1450 kgf/cm2. Determine the stress in the rod if the
load had been applied gradually and also the maximum stress if the load had fallen from a
height of 4.5. Take E = 2.0 x 106 kgf/cm2.
2. A circular rod 5 cm in diameter and 3 metre long hangs vertically and has a collar
securely attached to the lower end. Find the maximum stress induced: (i) when a weight
of 250 kgf falls through 15 cm on the collar, (ii) when a weight of 2500 kgf falls 1.5 cm
on the collar. Take E = 2.1 x 106 kgf/cm2.
3. A cantilever beam of length 4 m carries point load of 1 kN, 2 kN and 3 kN at 1, 2 and 4
m from the fixed end. Draw the shear force and bending moment diagrams for the
cantilever.
4. A cantilever of length 4 m carries a UDL of 1kN/m run over the whole length and a point
load of 2 kN at a distance of 1 m from the free end. Draw the S.F. and B.M. diagrams for
the cantilever.
All the best