Professional Documents
Culture Documents
,
Ltd.
Research Document Center
Document
Number
Version
Confidentiality
3.1
Product: IMS
72 Pages
Ver
Date
Notes
1.0
31-Aug-11
1.1
21-set-11
- Item 1.30 Voice Mail Service: Added service description and example was changed.
- Added Item 1.58: Support FAX service.
1.2
27-set-11
- Items from 1.1 to 1.10: scripts were changed to support SIP Digest authentication
1.3
01-nov-11
1.4.1
30-nov-11
- Added description for HSS, ENS and ATS part for creation of SIP and H248 users.
1.4.2
11-jan-12
1.4.3
12-Jan-12
- Error found on chapter 1.1 and 1.2 about ADD SBR script , the correct notation is SIP
URI, not TEL URI.
1.4.4
18-Jan-12
- Chapter 1.12 - Added CBA commands when subscriber has default K value;
- Added Chapter 1.36 Set Temporary Suspension of Subscriber;
- Added Chapter 1.37 Remove Temporary Suspension of Subscriber;
- Added Chapter 1.38 List Temporary Suspension of Subscriber.
- Added Chapter 1.39 MSAN Users Change the Access Part and keep the Subscriber
Number
- Added Chapter 1.40 MSAN Users Change the Subscriber Number and keep Access
Part
Janir Pinheiro SPO TSD
1.5
05-Mar-12
1.6
09-Apr-12
- Changed command: USE ME now uses customized NE name to support dual homing
service;
- Added command: ADD HNNRLI must be added also for TEL URI format to support
Emergency call service;
2.0
26-Jun-12
- Chapter 1.2 - Added parameter EMGCN for the command ADD ASBR;
Parameter NETID was changed to support geo-redundancy service.
- Chapter 2 has changed, added new solution based on ENUM index for NCOS.
Copyright by Huawei
-2-
2.1
23-Jul-12
2.2
13-Sep-12
TanGuangsheng Shenzhen
R&D
2.3
27-Oct-12
2.4
28-Jan-13
TianZhiGang
R&D
Shenzhen
2.5
14-Mar-13
TianZhiGang
R&D
Shenzhen
2.6
27-Mar-13
2.7
20-May-13
- Update the chapter 1.2, add an IMPORTANT note and three commands at page 26.
2.8
24-May-13
- Update the chapter 1.2, add a description to commands ADD ANI at page 26.
2.9
11-Jun-13
- Add Chapter 1.45 Apply Number Change Announcement for changed number
3.0
31-Jul-13
- Update the chapter 1.12: modify terminal command for activation when subscriber has
default K value to #66#.
- Update the chapter 1.1 and 1.2: add information for referring to Table 1 when
configuring CSC (call source) parameter for ADD SBR command in ATS.
- ADD SBR adds a parameter FLBGRP to differentiate user type.
3.1
23-Aug-13
- Added chapters 1.14.1 and 1.14.2: Procedure to configure PBX hunting group when
associated subscriber has valid number (DNH) and virtual number (DLH).
Copyright by Huawei
-3-
Table of Contents
1 SUBSCRIBER CREATION AND SERVICE CONFIGURATION .................................................................................... 7
1.1 Create New SIP subscriber .................................................................................................................................................... 7
1.2 Create New H.248 subscriber .............................................................................................................................................. 14
1.3 Remove SIP Subscriber ....................................................................................................................................................... 26
1.4 Remove H.248 Subscriber ................................................................................................................................................... 27
1.5 List SIP subscriber database parameters ............................................................................................................................. 28
1.6 List H.248 subscriber database parameters ......................................................................................................................... 29
1.7 Give Conference Service Right to Subscriber ....................................................................................................................... 30
1.8 Call Waiting ........................................................................................................................................................................ 30
1.9 Voice Mail System ............................................................................................................................................................... 31
1.10 Call Forward Unconditional (CFU) ..................................................................................................................................... 33
1.11 Change Subscriber Call Source .......................................................................................................................................... 34
1.12 Outgoing Call Barring (Cadeado Eletrnico) ...................................................................................................................... 35
1.12.1 Command Description ....................................................................................................................................................... 35
1.12.2 Terminal commands........................................................................................................................................................... 37
1.13 Calling Line Identification Presentation (CLIP) ................................................................................................................... 37
1.14 SIP PBX subscribers ........................................................................................................................................................... 38
1.14.1 PBXSBR with valid subscriber number (DNH) .................................................................................................................... 38
1.14.2 PBXSBR with virtual subscriber number (DLH) .................................................................................................................. 41
1.15 H.248 PBX subscribers ...................................................................................................................................................... 43
1.16 Change Subscriber Restriction Group from 1029 to none 65535 ....................................................................................... 44
1.17 Remove Conference Authority from Subscriber ................................................................................................................ 44
1.18 Remove Call Waiting Authority from Subscriber ............................................................................................................... 45
1.19 Remove CFU from subscriber ............................................................................................................................................ 45
1.20 Change Subscriber Call Source .......................................................................................................................................... 46
Copyright by Huawei
-4-
1.21 Remove Outgoing Call Barring (Cadeado Eletrnico) from subscriber ............................................................................... 46
1.22 Remove CLIP authority from subscriber ............................................................................................................................ 47
1.23 Remove SIP subscriber from a PBX group ......................................................................................................................... 47
1.24 Remove H.248 Subscriber from a PBX group ..................................................................................................................... 48
1.25 Reset Subscriber Password to default value (Cadeado Eletrnico) .................................................................................... 48
1.26 List Call Waiting ................................................................................................................................................................ 49
1.27 List Conference ................................................................................................................................................................. 50
1.28 List Voice Mail Service ...................................................................................................................................................... 50
1.29 List CFU (Call Forwarding Unconditional) .......................................................................................................................... 51
1.30 List Call Source .................................................................................................................................................................. 52
1.31 List CLIP ............................................................................................................................................................................ 53
1.32 List PBX subscribers .......................................................................................................................................................... 53
1.33 List Outgoing Call Barring (Cadeado Eletrnico) ................................................................................................................ 54
1.34 Register CFU from IMS no subscriber intervention............................................................................................................ 54
1.35 Support Fax Service .......................................................................................................................................................... 55
1.36 Set Temporary Suspension of subscriber........................................................................................................................... 56
1.37 Remove Temporary Suspension of subscriber ................................................................................................................... 56
1.38 List Temporary Suspension of subscriber .......................................................................................................................... 57
1.39 MSAN Users Change the Access Part and keep the Subscriber Number .......................................................................... 57
1.40 MSAN Users Change the Subscriber Number and keep Access Part ................................................................................ 58
1.41 Calling Line Identification Restriction (CLIR) ...................................................................................................................... 58
1.42 Calling Line Identification Restriction Override (RIO) ........................................................................................................ 59
1.43 List CLIR ............................................................................................................................................................................ 59
1.44 List RIO ............................................................................................................................................................................. 60
1.45 Apply Number Change Announcement for changed number ............................................................................................ 60
1.45.1 Modify a current record for number change announcement: ........................................................................................... 60
1.45.2 Add a new record to apply a number change announcement: ......................................................................................... 61
Copyright by Huawei
-5-
Copyright by Huawei
-6-
Copyright by Huawei
-7-
USE ME:MENAME=ATS;
ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,VCCFLAG=NO,VTFLAG=NO,
NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CCO2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,
CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967
295,OUTRST=NO,INRST=NO,NOAT=20,RINGCOUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITIN
G,SCF=NO,LMTGRP=65534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br", LP=62, CSC=1001, FLBGRP=3, TEMPLATEIDX=1;
Command Description
USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189",
REALM="ims1.gvt.net.br";
Description: Add SIP Digest authentication configuration for this user.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
HUSERNAME (V): The user name, used to register the subscriber on HSS. In this field, must fill the number in the
format + 55 AC number (8 digits). As a default, HUSERNAME value is the same with value of IMPI.
PWD (V): The user password, used to register the subscriber on HSS. This field can be filled by any character
excepting the symbols & and it has a maximum length of 32 digits.
IMPORTANT = this password is only used for registration of subscriber, it has no relation with password for
supplementary services. For SS, refer to Chapter 1.25 - Reset Subscriber Password to default value (Cadeado
Eletrnico).
REALM: (V): This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:
SPO
ims1.gvt.net.br
RJO
ims1.gvt.net.br
CTA
ims2.gvt.net.br
MGA
ims2.gvt.net.br
BHE
ims3.gvt.net.br
RCE
ims3.gvt.net.br
PBXUSERFLAG=FALSE;
Copyright by Huawei
-8-
Description: Add an IMS subscription, specify an ID for the IMS subscription, and it is optional to add an IMPI and
the associated IMPU for the IMS subscription in the HSS service database.
SUBID (V): This is a unique identified on the HSS. In this field, must fill the number in the format +55 AC number (8
digits). As a default, SUBID value is the same with value of IMPI.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF first.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
PBXUSERFLAG (V): This is the PBX user flag. This parameter is optional. The default value is FALSE, if the subscriber
has the PBX service (chapter 1.35), this value must be change to TRUE.
Value range: TRUE (PBXUSER), FALSE (NOTPBXUSER)
ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";
Description: Add an IMPU for an existing IMPI to the HSS service database.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HVNTPLID: IMPU="sip:+556239901189@ims1.gvt.net.br", VNTPLID=1;
SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;
Description: It sets the visited network template ID for the specified IMPU in the HSS service database. If the IMPU
belongs to an IRS, the other IMPUs in the IRS are automatically registered with the same visited network template
ID.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
VNTPLID (F): This is an index value; this parameter must be set by using the ADD HVNTPL command before it is
referred to here. GVT default value is 1, there is only one value for one IMS site.
SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE;
SET HREGAUTH: IMPU="sip:+556239901189@ims1.gvt.net.br", REGAUTH=TRUE;
Description: It sets the registration authority for the specified IMPU in the HSS service database.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
Copyright by Huawei
-9-
REGAUTH (V): The value TRUE means that the registration is allowed; the value FALSE means that the registration is
not allowed. The GVT default value is TRUE.
Value range: FALSE (False), TRUE(True)
SET HIRS: IRSID=1, IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\"";
Description : It set the implicit registration set (IRS) attribute for multiple IMPUs in the HSS service database. In the
IRS, if a number registration is successful, then all the other numbers automatically registered.
IRSID (F): This parameter is unique on the HSS and must be filled as 1 in all the records. The value 0 means
deleting the specified IMPU from the IRS.
IMPULIST (V): The IMPU list can contain up to 10 IMPUs separated by &, The IMPU must be set by running the
operation ADD HSUB, or ADD HIMPU before it is referred to here. The IMPU value must be in SIP URI or TEL URI
format.
Example:
IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\""; Means two different names
for the same subscriber
IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\"&\"sip:gvttest@ims1.gvt.net.br\"
"; Means three different names for the same subscriber.
SET HDEFIMPU: IRSID=1,IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: It sets the default IMPU for the specified implicit registration set (IRS) in the HSS service database. The
default IMPU provides a default value for service processing at the network side. It is used when required for
service processing.
IRSID (F): This parameter is unique on the HSS and must be filled as 1 in all the records.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HSPSHARE: BASEIMPU="sip:+556239901189@ims1.gvt.net.br", IMPU="tel:+556239901189";
Description: It shares a service profile between an IMPU and the specified base IMPU in the HSS service database.
For example, If A and B share the service profile, then A and B are the same for CSCF.
BASEIMPU (V): The base IMPU whose associated service profile is to be shared. The IMPU value must be in SIP URI
or TEL URI format
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HALIASPU: ALIASID=1, IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\"";
Copyright by Huawei
- 10 -
Description: This operation to set an alias group ID for multiple IMPUs in the HSS service database. The alias group
refers to a collection of the IMPUs that share the service profile in an implicit registration set (IRS). You can fulfill one
of the following tasks using the command. For example, in the alias group contains A and B, then A and B are the
same for AS.
ALIASID (F): This parameter is unique on the HSS and must be filled as 1 in all the records.
IMPULIST (V): An IMPU list can contain up to 10 IMPUs separated by &, The IMPUs contained in an IMPU list must
be set before they are referred to here. They are obtainable by running the LST HSUB operation. The IMPU value
must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
ADD HSIFC:IMPU="sip:+556239901189@ims1.gvt.net.br", SIFCID=621;
Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with
a maximum of eight shared iFC sets.
IMPU(V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel: +55 AC number(8 digits).
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is XX+P, where XX is according to the IMS Site: 41+P (CTA), 44+P
(MGA), 11+P (SPO), 21+P (RJO), 31+P (BHE) and 81+P (RCE).
P can assume the follow values:
1 - For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
For more details about this parameter, please refer to the HLD documentation, table 7-2 Share IFC Template list
ADD HNNRLI:IMPU="sip:+556239901189@ims1.gvt.net.br",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
Description: It is used to add a reference location data record for the specified IMPU to the HSS service database.
PS: FOR EMERGENCY CALL SERVICES, ITS MANDATORY TO ADD THIS COMMAND FOR BOTH FORMATS, SIP URI
AND TEL URI.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
RLINDEX (V): this is an index for this command. A subscriber can have up to 5 different location records, but for GVT
project, the value is 1 for all subscribers.
RLI (V): The field RLI (Reference Location Information) is used to mark the city where the subscriber belongs to, and
on E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is
the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't
used.
Examples:
Curitiba:
So Paulo:
CTA_
SPO_
Copyright by Huawei
- 11 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101,
SPO
!^(.*)$!sip:+\\1@ims1.gvt.net.br\;user=phone!
RJO
!^(.*)$!sip:+\\1@ims1.gvt.net.br\;user=phone!
Copyright by Huawei
- 12 -
CTA
!^(.*)$!sip:+\\1@ims2.gvt.net.br\;user=phone!
MGA
!^(.*)$!sip:+\\1@ims2.gvt.net.br\;user=phone!
BHE
!^(.*)$!sip:+\\1@ims3.gvt.net.br\;user=phone!
RCE
!^(.*)$!sip:+\\1@ims3.gvt.net.br\;user=phone!
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
ADD TP:TEMPLATEIDX=2,TEMPLATENAME="R2_PRA_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=PSTN,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
Description: This command is used to add a Subscriber Data Template to the configuration database. Each
Subscriber Data Template is identified by a unique template index. You can use the same template to define
subscribers with some common attributes.
TEMPLATEIDX (V): It defines the index of the Subscriber Data Template. In GVT project, we will use two different
data templates:
Index 1: for SIP / h248 subscribers
Index 2: for R2 / PRA subscribers
PS: For some parameters (For example: LP and CS), because it will be changed for each subscriber in the
command ADD SBR, it will not be needed to be included in the template, so you can define the template with
standard values.
NSCLIP (F): It specifies the Calling Line Identification Presentation (CLIP) service right of a subscriber. This parameter
is one of the elements Supplement Service Right. It is the default service GVT. The value is 1.
NSSCCA (F): It specifies the Collect Call(SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. It is the default service GVT. The value is 1.
Copyright by Huawei
- 13 -
Call-out authority (V): It specifies the call-out authority. By default, the system configures the following call-out
authorities for the subscriber data template: intra office, local, local toll, national toll, intra-Centrex, outgoing
Centrex, customized Operator and customized supply service.
Call-in authority (V): It specifies the call-in authority. By default, the system configures the following call-in
authorities for the subscriber data template: International call-in authority, National Toll call-in authority and Local
Toll call-in authority.
CODEC (V): It specifies the Supported Codec. By default, GVT system need support G711_64K_A_LAW,
G711_64K_U_LAW, G722, G723, G729, and AMR. The value 1 means that the codec is set, 0 means that it is not
set.
VMAIND (F): This is the Voice mailbox address index; it specifies the index of a voice mailbox address for a specified
subscriber. It must be defined by running ADD VOICEMAIL in the MML Command - ATS9900 window before being
referenced here.GVT value is 1.
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br", LP=62, CSC=1001, FLBGRP=3, TEMPLATEIDX=1;
Description: It is used to add an ATS subscriber and set the related service rights and basic attributes of the
subscriber in the configuration database.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
LP (V): It specifies the local DN set of a subscriber. The value 65534 is a wildcard. When the IMPU is in local TEL URI
format, such as tel: 39901176, this parameter and IMPU together identify a subscriber. In this case, the parameter
must be defined by running ADD LDNSET in the MML Command - ATS9900 window before being referenced here.
FLBGRP (V): It is used to indicate the user access type. For SIP user, the value is 3.
CSC (V): It specifies the call source of a subscriber. The parameter must be defined by running ADD CALLSRC in the
MML Command - ATS9900 window before being referenced here.
Please refer to the Table 1 for all call source codes currently used on IMS Network before adding this command.
TEMPLATEIDX (V): It specifies the index of the Subscriber Data Template. The parameter must be defined by running
ADD TP before being referenced here.
Copyright by Huawei
- 14 -
ORDER=10,
PREFERENCE=101,
FLAGS="U",
USE ME:MENAME=ATS;
ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,VCCFLAG=NO,VTFLAG=NO,
NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CCO2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,
CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967
295,OUTRST=NO,INRST=NO,NOAT=20,RINGCOUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITIN
G,SCF=NO,LMTGRP=65534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br", LP=62, CSC=1001, FLBGRP=6, TEMPLATEIDX=1;
USE ME:MENAME=M2000;
ADD ASBR: SOFTXIP="10.140.72.224", PUI="sip:+556239901189@ims1.gvt.net.br", PRI="+556239901189", REGTP=SINGLE, DID=ESL,
MN=22, EID="10.140.72.130:2944", TID="0", HNID="HNID01", NETID="VNID01", NETINFO="GNA_", PHNCON="AC62", DIGMAP=0,
PWD="1189", EMGCN=EMG01, DP=YES, DR=YES, CONF=0;
Note: The parameter MN (Module Number) is an optional parameter, if it is omitted, the AGCF will
automatically distribute the new subscriber based on its internal logic. i.e. The system invoking this interface
doesnt need to input this parameter during creating new subscribers, unless it has some special reason to
manually assign the new subscriber to a specific module.
If the number of MGW exceeds the capability of the module, the system will return the 268034, and the
description is The table exceeds the capability of the module.
Command Description
Copyright by Huawei
- 15 -
USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189",
REALM="ims1.gvt.net.br";
Description: Add SIP Digest authentication configuration for this user.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
HUSERNAME (V): The user name, used to register the subscriber on HSS. In this field, must fill the number in the
format + 55 AC number (8 digits). As a default, HUSERNAME value is the same with value of IMPI.
PWD (V): The user password, used to register the subscriber on HSS. This field can be filled by any character
excepting the symbols & and it has a maximum length of 32 digits.
IMPORTANT = this password is only used for registration of subscriber, it has no relation with password for
supplementary services. For SS, refer to Chapter 1.25 - Reset Subscriber Password to default value (Cadeado
Eletrnico).
EMGCN (V): Emergence Call Group Name. It specifies the name of the emergence call group that the subscriber to
be added belongs to. When this parameter is specified for a subscriber, the subscriber will be able to call the
emergency numbers defined for the specified group. GVT default value is EMG01.
REALM: (V): This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:
SPO
ims1.gvt.net.br
RJO
ims1.gvt.net.br
CTA
ims2.gvt.net.br
MGA
ims2.gvt.net.br
BHE
ims3.gvt.net.br
RCE
ims3.gvt.net.br
PBXUSERFLAG=FALSE;
Description: Add an IMS subscription, specify an ID for the IMS subscription, and it is optional to add an IMPI and
the associated IMPU for the IMS subscription in the HSS service database.
SUBID (V): This is a unique identified on the HSS. In this field, must fill the number in the format +55 AC number (8
digits). As a default, SUBID value is the same with value of IMPI.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF first.
Copyright by Huawei
- 16 -
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
PBXUSERFLAG (V): This is the PBX user flag. This parameter is optional. The default value is FALSE, if the subscriber
has the PBX service (chapter 1.35), this value must be change to TRUE.
Value range: TRUE (PBXUSER), FALSE (NOTPBXUSER)
ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";
Description: Add an IMPU for an existing IMPI to the HSS service database.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits), the parameter must be defined by running ADD HSDAINF.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HVNTPLID: IMPU="sip:+556239901189@ims1.gvt.net.br", VNTPLID=1;
SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;
Description: It sets the visited network template ID for the specified IMPU in the HSS service database. If the IMPU
belongs to an IRS, the other IMPUs in the IRS are automatically registered with the same visited network template
ID.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel: +55 AC number (8 digits).
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
VNTPLID (F): This is an index value; this parameter must be set by using the ADD HVNTPL command before it is
referred to here. GVT default value is 1, there is only one value for one IMS site.
SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE;
SET HREGAUTH: IMPU="sip:+556239901189@ims1.gvt.net.br", REGAUTH=TRUE;
Description: It sets the registration authority for the specified IMPU in the HSS service database.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
REGAUTH (V): The value TRUE means that the registration is allowed; the value FALSE means that the registration is
not allowed. The GVT default value is TRUE.
Value range: FALSE (False), TRUE(True)
SET HIRS: IRSID=1, IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\"";
Copyright by Huawei
- 17 -
Description : It set the implicit registration set (IRS) attribute for multiple IMPUs in the HSS service database. In the
IRS, if a number registration is successful, then all the other numbers automatically registered.
IRSID (F): This parameter is unique on the HSS and must be filled as 1 in all the records. The value 0 means
deleting the specified IMPU from the IRS.
IMPULIST (V): The IMPU list can contain up to 10 IMPUs separated by &, The IMPU must be set by running the
operation ADD HSUB, or ADD HIMPU before it is referred to here. The IMPU value must be in SIP URI or TEL URI
format.
Example:
IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\""; Means two different names
for the same subscriber
IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\"&\"sip:gvttest@ims1.gvt.net.br\"
"; Means three different names for the same subscriber.
SET HDEFIMPU: IRSID=1,IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: It sets the default IMPU for the specified implicit registration set (IRS) in the HSS service database. The
default IMPU provides a default value for service processing at the network side. It is used when required for
service processing.
IRSID (F): This parameter is unique on the HSS and must be filled as 1 in all the records.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HSPSHARE: BASEIMPU="sip:+556239901189@ims1.gvt.net.br", IMPU="tel:+556239901189";
Description: It shares a service profile between an IMPU and the specified base IMPU in the HSS service database.
For example, If A and B share the service profile, then A and B are the same for CSCF.
BASEIMPU (V): The base IMPU whose associated service profile is to be shared. The IMPU value must be in SIP URI
or TEL URI format
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SET HALIASPU: ALIASID=1, IMPULIST="\"sip:+556239901189@ims1.gvt.net.br\"&\"tel:+556239901189\"";
Description: This operation to set an alias group ID for multiple IMPUs in the HSS service database. The alias group
refers to a collection of the IMPUs that share the service profile in an implicit registration set (IRS). You can fulfill one
of the following tasks using the command. For example, in the alias group contains A and B, then A and B are the
same for AS.
ALIASID (F): This parameter is unique on the HSS and must be filled as 1 in all the records.
Copyright by Huawei
- 18 -
IMPULIST (V): An IMPU list can contain up to 10 IMPUs separated by &, The IMPUs contained in an IMPU list must
be set before they are referred to here. They are obtainable by running the LST HSUB operation. The IMPU value
must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
ADD HSIFC:IMPU="sip:+556239901189@ims1.gvt.net.br", SIFCID=621;
Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with
a maximum of eight shared iFC sets.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is XX+P, where XX is according to the IMS Site: 41+P (CTA), 44+P
(MGA), 11+P (SPO), 21+P (RJO), 31+P (BHE) and 81+P (RCE).
P can assume the follow values:
1 - For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
For more details about this parameter, please refer to the HLD documentation, table 7-2 Share IFC Template list
ADD HNNRLI:IMPU="sip:+556239901189@ims1.gvt.net.br",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;
Description: It is used to add a reference location data record for the specified IMPU to the HSS service database.
PS: FOR EMERGENCY CALL SERVICES, ITS MANDATORY TO ADD THIS COMMAND FOR BOTH FORMATS, SIP URI
AND TEL URI.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
RLINDEX (V): this is an index for this command. A subscriber can have up to 5 different location records, but for GVT
project, the value is 1 for all subscribers.
RLI (V): The field RLI (Reference Location Information) is used to mark the city where the subscriber belongs to, and
on E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is
the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't
used.
Examples:
Curitiba:
CTA_
So Paulo: SPO_
Alto Rolante: ALRO
Acegu:
ACEG
RLT (F): It is the type of the reference location information. GVT default value is IEEE-802.11a.
USE ME:MENAME=ENS;
Copyright by Huawei
- 19 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101,
SPO
!^(.*)$!sip:+\\1@ims1.gvt.net.br\;user=phone!
RJO
!^(.*)$!sip:+\\1@ims1.gvt.net.br\;user=phone!
CTA
!^(.*)$!sip:+\\1@ims2.gvt.net.br\;user=phone!
MGA
!^(.*)$!sip:+\\1@ims2.gvt.net.br\;user=phone!
BHE
!^(.*)$!sip:+\\1@ims3.gvt.net.br\;user=phone!
Copyright by Huawei
- 20 -
RCE
!^(.*)$!sip:+\\1@ims3.gvt.net.br\;user=phone!
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
ADD TP:TEMPLATEIDX=2,TEMPLATENAME="R2_PRA_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=PSTN,
VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC
O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=
1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING
COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6
5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;
Description: This command is used to add a Subscriber Data Template to the configuration database. Each
Subscriber Data Template is identified by a unique template index. You can use the same template to define
subscribers with some common attributes.
TEMPLATEIDX (V): It defines the index of the Subscriber Data Template. In GVT project, we will use two different
data templates:
Index 1: for SIP / h248 subscribers
Index 2: for R2 / PRA subscribers
PS: For some parameters (For example: LP and CS), because it will be changed for each subscriber in the
command ADD SBR, it will not be needed to be included in the template, so you can define the template with
standard values.
NSCLIP (F): It specifies the Calling Line Identification Presentation (CLIP) service right of a subscriber. This parameter
is one of the elements Supplement Service Right. It is the default service GVT. The value is 1.
NSSCCA (F): It specifies the Collect Call(SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. It is the default service GVT. The value is 1.
Call-out authority (V): It specifies the call-out authority. By default, the system configures the following call-out
authorities for the subscriber data template: intra office, local, local toll, national toll, intra-Centrex, outgoing
Centrex, customized Operator and customized supply service.
Copyright by Huawei
- 21 -
Call-in authority (V): It specifies the call-in authority. By default, the system configures the following call-in
authorities for the subscriber data template: International call-in authority, National Toll call-in authority and Local
Toll call-in authority.
CODEC (V): It specifies the Supported Codec. By default, GVT system need support G711_64K_A_LAW,
G711_64K_U_LAW, G722, G723, G729, and AMR. The value 1 means that the codec is set, 0 means that it is not
set.
VMAIND (F): This is the Voice mailbox address index; it specifies the index of a voice mailbox address for a specified
subscriber. It must be defined by running ADD VOICEMAIL in the MML Command - ATS9900 window before being
referenced here.GVT value is 1.
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br", LP=62, CSC=1001, FLBGRP=6, TEMPLATEIDX=1;
Description: It is used to add an ATS subscriber and set the related service rights and basic attributes of the
subscriber in the configuration database.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
LP (V): It specifies the local DN set of a subscriber. The value 65534 is a wildcard. When the IMPU is in local TEL URI
format, such as tel: 39901176, this parameter and IMPU together identify a subscriber. In this case, the parameter
must be defined by running ADD LDNSET in the MML Command - ATS9900 window before being referenced here.
CSC (V): It specifies the call source of a subscriber. The parameter must be defined by running ADD CALLSRC in the
MML Command - ATS9900 window before being referenced here.
Please refer to the Table 1 for all call source codes currently used on IMS Network before adding this command.
FLBGRP (V): It is used to indicate the user access type. For H.248 user, the value is 6.
TEMPLATEIDX (V): It specifies the index of the Subscriber Data Template. The parameter must be defined by running
ADD TP before being referenced here.
USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the
Management Server M2000.
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
ADD ASBR: SOFTXIP="10.140.72.224", PUI="sip:+556239901189@ims1.gvt.net.br", PRI="+556239901189",
- 22 -
SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation.
PUI(V):Public User ID,The user ID used outside the IMS Core is the public user ID that is used to communicate with
others. The value of this parameter must be the same as the user ID defined on the HSS and ATS. From now on,
this will be the facility name of the GVT subscriber. It must have the format according to the example below
(from the GVT HLD):
Site
User Type
SPO
User
tel: E.164
sip:E.164@ims1.gvt.net.br
RJO
User
tel: E.164
sip:E.164@ims1.gvt.net.br
CTA
User
tel: E.164
sip:E.164@ims2.gvt.net.br
MGA
User
tel: E.164
sip:E.164@ims2.gvt.net.br
BHE
User
tel: E.164
sip:E.164@ims3.gvt.net.br
RCE
User
tel: E.164
sip:E.164@ims3.gvt.net.br
PRI (V): The private user ID for IMS subscribers is a globally unique identity defined by a home network carrier. It is
used to uniquely identify a piece of subscription in the home network from a network perspective. The value of
this parameter must be the same as the user ID defined on the HSS and ATS. In GVT Network Design, we will use
the PUI notation without the sip: suffix and domain, its according E.164 standard.
Example: PUI="sip:+556239901189@ims3.gvt.net.br", PRI="+556239901189"
REGTP (F): Register type. It will be SINGLE register in all situations. This parameter will be fixed.
DID (F): Port type. It will be ESL in all situations. This parameter will be fixed.
MN (V): Module Number, It specifies the module number of the UACU on which the subscriber is configured. It is
valid only for ESL subscribers. The value range is 22-101. The value of the parameter must be defined in ADD BRD
before being referenced.
EID (V): Equipment ID. This is the identification of the Access Node inside the IMS. The notation is the IP address
of the AG(MSAN) + : + the signaling port. Example: 10.140.72.130:2944, where 10.140.72.130 is the IP of
Keymile MSAN and 2944 is the signaling port. We can compare it as the V5 ID of the V5 interface.
TID (V): Terminal ID. It specifies the physical port number of the MG to which the ESL subscriber belongs. Its
the identification of the subscriber port for the corresponding Equipment ID. We can compare it to the L3ADDR on
V5 interface.
HNID (V): Home Network ID. This is the Index of the Home Network database. We recommend to create a index
like the table below, in case of GVT intends to set up an additional home network in the future. More information
about Home Networks, please refer to the documentation.
Site
Home Network ID
SPO
HNID01
ims1.gvt.net.br
Copyright by Huawei
- 23 -
RJO
HNID01
ims1.gvt.net.br
CTA
HNID02
ims2.gvt.net.br
MGA
HNID02
ims2.gvt.net.br
BHE
HNID03
ims3.gvt.net.br
RCE
HNID03
ims3.gvt.net.br
NETID (V): Visited Network ID. This is the Index of the Visited Network database. We recommend creating an
index like the table below, in case of GVT intends to set up a different Visited Network in the future. More
information about Visited Networks, please refer to the documentation.
PS: VNID in GVT Network topology is directly associated to the number of AGCFs in the network.
Site
Visited Network ID
SPO
VNID01
agcf1-spo7.ims1.gvt.net.br
RJO
VNID02
agcf1-rjo6.ims1.gvt.net.br
CTA
VNID01
agcf1-cta7.ims2.gvt.net.br
MGA
VNID02
agcf1-mga4.ims2.gvt.net.br
BHE
VNID01
agcf1-bhe4.ims3.gvt.net.br
RCE
VNID02
agcf1-rce3.ims3.gvt.net.br
If a new AGCF must be installed in the future, just need to follow the sequence name, for example, for CTA:
Site
Visited Network ID
CTA
VNID02
agcf2-cta7.ims2.gvt.net.br
NETINFO (V): This parameter is related to the Access Network Information (ANI), and its used to determine
the location-info of the subscriber. This information appears on the INVITE message and its used for E-CSCF to
determine the emergency number (or numbers) that attends this city. The rule adopted for this field is the Anatel
notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't used.
Copyright by Huawei
- 24 -
Examples:
Curitiba:
CTA_
So Paulo: SPO_
Alto Rolante: ALRO
Acegu:
ACEG
PS: This information must be the same as configured on the parameter RLI when creating the Reference Location
Information for an IMPU on HSS Server (item 2 below).
PHNCON (V): Phone context. Its used to fill the A number to match the IMPU standard. For GVT Project, we use
Phone Context Database to add the information +55AC in front of the original A number. Example:
Curitiba-PR will have the PHNCON = AC41. Inside Phone Context table, AC41 indexes to the information +5541
Goiania-GO will have the PHNCON = AC62. Inside Phone Context table, AC62 indexes to the information +5562
DIGMAP (V): Digitmap index.
PWD (V): It specifies the password used for authentication on HSS. This password has no relation with the
password used on supplementary services. The PWD value is the same with the PWD of ADD HSDAINF.
EMGCN (V): It specifies the Emergency call group. Basically, it defines some dialing rules for emergency calls (like
digitmap, other). For this project, there is no need to define a new one, we will keep this parameter as EMG01.
DP (V): Download profile from AS, keep it as default.
DR (V): Send registration subscription, keep it as default.
CONF (F): Conference URI index. It specifies the conference URI index used for applying for a conference.
Specifically, the subscriber uses the domain name of the MRF server associated with the conference URI index to
instruct the AS to apply for conference resources. This parameter is fixed as 0.
IMPORTANT: Before we add subscribers information for new cities, we may need these commands to add
parameters for referenced:
Description: It is a configuration command, and is used to add a visited network ID in the configuration database.
This function is used to configure functions provided by the AGCF.
VNID (V): It is the domain name of the AGCF.
Description: this is used to add an access network ID in the configuration database. When we added a new MGW
to the network, we need to use this command to add the MGW information on AGCF, normally; we use at least
one MGW for each city.
NAME (V): this indicates an access network name provide for a AGCF subscriber. It is referenced by the command
ADD ASBR.
ANI (V): When it is set to an MGW name, it indicates that the subscriber belongs to this MGW.
- 25 -
Description: It is a configuration command, and is used to add a number context in the configuration database.
This function is used to configure functions provided by the AGCF.
PC (V): The parameter value is in the format of "+country code"+"area code".
Command Description
USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
RMV HSUB: SUBID="+556239901189";
Description: This command is used to remove a subscription on the HSS. Perform this operation to remove the
specified IMS subscription and the IMPI and IMPU associated with the IMS subscription from the HSS service
database. Running this command, it will also remove the data from the ATS (RMV SBR)
SUBID (V): This is a unique identified on the HSS, The subscription ID is the key parameter used to determine the
subscription data to be removed. It is obtainable by running the LST HSUB operation. The value of the parameter is
case sensitive. In this field, must fill the number in the format 55 AC number (8 digits).
RMV HSDAINF: IMPI="+556239901189";
Description: This command is used to remove the SIP Digest data record for the specified IMPI from the HSS service
database.
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
USE ME:MENAME=ENS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
Copyright by Huawei
- 26 -
MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000.
RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";
Command Description
USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
RMV HSUB: SUBID="+556239901189";
Description: This command is used to remove a subscription on the HSS. Perform this operation to remove the
specified IMS subscription and the IMPI and IMPU associated with the IMS subscription from the HSS service
database. Running this command, it will also remove the data from the ATS (RMV SBR)
SUBID (V): This is a unique identified on the HSS, The subscription ID is the key parameter used to determine the
subscription data to be removed. It is obtainable by running the LST HSUB operation. The value of the parameter is
case sensitive. In this field, must fill the number in the format 55 AC number (8 digits).
RMV HSDAINF: IMPI="+556239901189";
Description: This command is used to remove the SIP Digest data record for the specified IMPI from the HSS service
database.
Copyright by Huawei
- 27 -
IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8
digits)
USE ME:MENAME=ENS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server
(ENS).
RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management
Server (M2000).
RMV ASBR: SOFTXIP="10.140.72.224", PUI="sip:+556239901189@ims1.gvt.net.br ";
Description: This command is used to remove A-CSCF subscriber data in the configuration database. This function is
used to configure functions provided by the AGCF.
SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation.
PUI (V): This is a Public User ID; The user ID used outside the IMS Core is the public user ID that is used to
communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and
ATS. From now on, this will be the facility name of the GVT subscriber. It must have the format according to the
example below (from the GVT HLD):
Site
User Type
SPO
User
tel: E.164
sip:E.164@ims1.gvt.net.br
RJO
User
tel: E.164
sip:E.164@ims1.gvt.net.br
CTA
User
tel: E.164
sip:E.164@ims2.gvt.net.br
MGA
User
tel: E.164
sip:E.164@ims2.gvt.net.br
BHE
User
tel: E.164
sip:E.164@ims3.gvt.net.br
RCE
User
tel: E.164
sip:E.164@ims3.gvt.net.br
Copyright by Huawei
- 28 -
LST SBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with
service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to
indicate that the subscriber has the service authority.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
Command Description
USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management
Server M2000.
LST ASBR: SOFTXIP="10.140.72.224", PUI="sip:+556239911190@ims1.gvt.net.br";
Description: It is a configuration command, and is used to query AGCF subscriber data in the configuration database.
This function is used to configure functions provided by the AGCF.
SOFTXIP (V): The IP address is the IP of AGCF BAM. This value is filled according to the actual situation.
PUI (V): This is a Public User ID; the user ID used outside the IMS Core is the public user ID that is used to
communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and
ATS. From now on, this will be the facility name of the GVT subscriber. It must have the format according to the
example below (from the GVT HLD):
Copyright by Huawei
- 29 -
Site
User Type
SPO
User
tel: E.164
sip:E.164@ims1.gvt.net.br
RJO
User
tel: E.164
sip:E.164@ims1.gvt.net.br
CTA
User
tel: E.164
sip:E.164@ims2.gvt.net.br
MGA
User
tel: E.164
sip:E.164@ims2.gvt.net.br
BHE
User
tel: E.164
sip:E.164@ims3.gvt.net.br
RCE
User
tel: E.164
sip:E.164@ims3.gvt.net.br
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br", NSNPTY=1;
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
NSNPTY (F): It specifies the Conference Call (NPTY) service right of a subscriber. You must set 0 to deactivate, 1
to activate the feature.
Copyright by Huawei
- 30 -
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCW=1;
REG COMSS:IMPU="sip:+556239901189@ims1.gvt.net.br", CW=1;
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCW=1;
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
NSCW (V): It specifies the Call Waiting (CW) service right of a subscriber. You must set 0 to deactivate, 1 to
activate the feature.
REG COMSS:IMPU="sip:+556239901189@ims1.gvt.net.br", CW=1;
Description: This command is used to register all common supplementary service for a subscriber. When a service is
registered, the service parameter value must be set to 1 (the check box of the service is selected on the SPG2800
Web Portal). The service is activated after being registered.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
CW (F): It specifies the call waiting (CW) service right of a subscriber. The CW service is automatically activated once
it is registered.
Copyright by Huawei
- 31 -
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCFBVM=1;
REG COMSS:IMPU="sip:+556239901189@ims1.gvt.net.br",CFBVM=1;
Introduction
There are four options where the call can be forwarded to the voice mail system, as below:
1 The called number is busy: In this case, the subscriber must have the supplementary service Call Forwarding
Busy to Voice Mailbox Right (NSCFBVM) set to 1. To register this service (REG COMSS), the parameter CFBVM must
be set to 1;
2 The called number does not reply the call: In this case, the subscriber must have the supplementary service Call
Forwarding No Reply to Voice Mailbox Right (NSCFNRVM) set to 1. To register this service (REG COMSS), the
parameter CFNRVM must be set to 1;
3 Forward all calls to voice mail: In this case, the subscriber must have the supplementary service Call forwarding
Unconditional to Voice Mailbox Right (NSCFUVM) set to 1. To register this service (REG COMSS), the parameter
CFUVM must be set to 1;
4 Terminal is offline (exclusive for SIP devices): In this case, the subscriber must have the supplementary service
Call forwarding Offline to Voice Mailbox Right (NSCFNLVM) set to 1. To register this service (REG COMSS), the
parameter CFNLVM must be set to 1.
Addittionally, the subscriber must have a Voice Mailbox Address Index (VMAIND). This parameter refers to the voice
mail box number configured on ATS.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br", NSCFBVM=1, NSMWI=1, VMAIND=1;
- 32 -
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCFBVM (V): This is the supplementary service Call Forwarding Busy to Voice Mailbox Right, You must set 0 to
deactivate, 1 to activate the feature.
REG COMSS:IMPU="sip:+556239901189@ims1.gvt.net.br",CFBVM=1;
Description: This command is used to register all common supplementary service for a subscriber. When a service is
registered, the service parameter value must be set to 1 (the check box of the service is selected on the SPG2800
Web Portal). The service is activated after being registered.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
CFBVM (F): It specifies the Call Forwarding Busy to Voice Mailbox Right of a subscriber. This service is
automatically activated once it is registered.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCFU=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
Copyright by Huawei
- 33 -
NSCFU (V): This is the supplementary service Call Forwarding Unconditional Right, You must set 0 to deactivate,
1 to activate the feature.
REG CFU:IMPU="sip:+556239901189@ims1.gvt.net.br", DIMPU="tel: 39901188";
Description: This command is used to register the CFU service. If a subscriber has the CFU service registered, the
incoming calls are unconditionally forwarded to the subscriber defined by Destination IMPU.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the
parameter are as follows:
To configure an IMPU in SIP URI format, type a string such as sip:+556239901176@ims2.gvt.net.br or
+556239901176@ims2.gvt.net.br
To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176
DIMPU (V): This is the Destination IMPU; it specifies the IMPU of a forwarded-to subscriber. It can be a TEL URI or a
SIP URI. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows:
To configure an IMPU in TEL URI format, type a string such as +556239901188 06239901188 or 39901188
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",CSC=1001;
Copyright by Huawei
- 34 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901103@ims1.gvt.net.br",NSCBA=1;
Description: This command is used to modify a specific or a group of parameters on a subscriber. In this case, it
enables the subscriber to use CBA feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service Outgoing Call Barring Right, You must set 0 to remove, 1 to set
the feature.
MOD SS:IMPU="sip:+556239901103@ims1.gvt.net.br",NSCBA=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service Outgoing Call Barring Right, You must set 0 to deactivate, 1 to
activate the feature.
Copyright by Huawei
- 35 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901103@ims1.gvt.net.br",NSCBA=1,KVALUE=K3;
Description: This command is used to modify a specific or a group of parameters on a subscriber. In this case, it
enables the subscriber to use CBA feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service Outgoing Call Barring Right, You must set 0 to remove, 1 to set
the feature.
KVALUE(V): This is the predefined barring level for this user. It means, the subscriber can only activate or deactivate
one type of call barring. Below is a table with the available barring levels:
Barring Level
K0
K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12
K13
Blocking Scenarios
Local Mobile
National Long Distance
International Long Distance
0900; 0300 and 0500
Local Mobile and National Long Distance
Local Mobile and International Long Distance
Local Mobile; 0900; 0300 and 0500
National and International Long Distance
National Long Distance; 0900; 0300 and 0500
International Long Distance; 0900; 0300 and 0500
Mobile; National and International Long Distance
Mobile; International Long Distance; 0900; 0300 and 0500
National and International Long Distance; 0900; 0300 and 0500
Mobile; National and International Long Distance; 0900; 0300 and 0500
MOD SS:IMPU="sip:+556239901103@ims1.gvt.net.br",NSCBA=1;
Description: This command is used to enable the authority to use the feature for a predefined K value.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA(V): This is the supplementary service Outgoing Call Barring Right, You must set 0 to deactivate, 1 to
activate the feature.
Copyright by Huawei
- 36 -
= Activate CBA feature. PPPP is the password with 4 digits, KK is the K value from 00 to 13.
# 66 * PPPP #
*# 67*OPWD*NPWD #
# 66 * PPPP #
*# 67*OPWD*NPWD #
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCLIP=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIP (V): This is the supplementary service Calling Line Identification Presentation Right, You must set 0 to
deactivate, 1 to activate the feature.
Copyright by Huawei
- 37 -
Command Description
IMPORTANT: PBX subscribers are, first of all, SIP or H248 subscribers. So before do this procedure, the subscribers
must be created by following the procedure described on the Chapter 1.1 or 1.2.
USE ME:MENAME=WORKFLOW;
Description: For PBX and Centrex service provisioning, the MENAME must be WORKFLOW, it specifies the
command will be performed in service flow mode. In service flow mode the command will be sent to both two ATS
sites in one redundancy group. Here, this parameter should be set to WORKFLOW, as the fixed value.
The MENAME with WORKFLOW value can only be used when perform on SPG as a Batch Task. In soap interface
between BSS and SPG, only need to specify the MEGROUP with the ATS_VPBX value. Only Virtual PBX
ADD/RMV/MOD/LST PBX, ADD/RMV/MOD/LST PBXSBR need to follow the following principle, for the soap format
detail, please refer <ATS9900 Service Provisioning Interface.chm>.
ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=0, SNDP=0,CHT=0;
Description: This command is used to add a PBX service data record to the configuration database. To add a PBX
service data record is to configure a PBX group, so that subscribers in the group can be selected to answer calls.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined
by the user policy configuration. For this issue, there is a redundancy ME group named ATS_VPBX. Here, this
- 38 -
A PBX pilot number can also be a number that does not exist in the subscriber data table. Such a PBX pilot number is
only an access code, and cannot be defined as an ordinary subscriber number by running ADD SBR.
QUL (V): It specifies whether the PBX group supports the queuing function. If the parameter is set to 1 (YES), it
indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy,
then the ATS adds the call to the call queue instead of playing the busy tone to the caller. When subscribers in the
PBX group become idle, the ATS connects the calls in the queue to the idle subscribers according to the "first in, first
out" principle. If the parameter is set to 0 (NO), it indicates that when a call is addressed to the PBX pilot number
and all the subscribers in the PBX group are busy, and then the ATS releases the call directly. The recommend
configuration is set this parameter to 1 (YES) for all the cases.
SGM (V): It specifies the mode in which the ATS selects a subscriber for answering a call addressed to the PBX pilot
number. Options:
MIN(FROM_SMALL_TO_LARGE): The ATS always selects the subscriber with the minimum equipment ID. This
sequences that the PBX subscribers are added by running ADD PBXSBR or MOD PBXSBR). After being selected to
answer calls and then released, the subscribers are queued again in the same way. Each release subscriber is added
to the end of the queue in turn automatically. After all the subscribers in the previous queue are selected, the ATS
selects the subscribers in the current queue. The recommended value for this parameter is 0 (MIN FROM_SMALL_TO_LARGE), but it can be configured according to subscriber requirement.
MDF (V): It specifies whether the ATS provides the simultaneous ringing function for the PBX pilot number. The
default value is 0 (NO), which indicates that when a call is addressed to the PBX pilot number, the idle subscribers in
the PBX group are selected based on the configured line hunting mode. If the parameter is set to 1 (YES), it indicates
that when a call is addressed to the PBX pilot number, the phones of all the idle subscribers in the PBX group ring
simultaneously. The recommended value for this parameter is 0 (NO), but it can be configured according to
subscriber requirement.
PAC (V): It specifies whether the ATS displays the PBX pilot number to the callee when a PBX subscriber makes a call.
For PBX group where the associated numbers has valid number (DNH), this value must be 0 (NO).
SNDP (V): It specifies whether the ATS adds the pilot number AVP to be sent to the CCF or the OCS, for charging
issues. Note that the operation specified by the parameter is different from the operation specified by Use pilot
number as caller number. Send pilot number mode controls only the contents of the AVP to be sent to the CCF or
the OCS. Options:
DNTH(DO_NOTHING): The system performs the processing as that carried out for an ordinary subscriber.
SDPL(SEND_PILOT): The system sends the PBX pilot number during the charging.
RPLC(REPLACE_CALLER_NUM): The system records the PBX pilot number into original caller AVP during the charging.
For PBX group where the associated numbers has valid number (DNH), this value must be 0 (DO_NOTHING).
Copyright by Huawei
- 39 -
CHT (V): It indicates whether the PBX group supports non-pilot number line hunting. If this parameter is set to 1
(Yes), the system performs line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to a pilot number. If this parameter is set to 0 (No), the
system does not perform line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to an ordinary subscriber. The recommended value for
this parameter is 0 (NO), but it can be configured according to subscriber requirement.
Description: This command is used to add a PBX subscriber data record to the configuration database. To add a PBX
subscriber data record is to add a PBX subscriber and configure the attributes of the PBX subscriber.
MEGROUP (F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by
the user policy configuration. For this issue, there is a redundancy ME group named ATS_VPBX. Here, this
parameter should be set to ATS_VPBX, as the fixed value.
IMPU (V): It defines an IMPU for a subscriber in the ATS9900 configuration database. Its value can be in TEL URI or
SIP URI format.
GDN (V): It specifies the pilot number of the PBX group to which the subscriber belongs. The parameter must be
defined by running ADD PBX before being referenced here.
PSN (V): This is the Line hunting serial number. It specifies the serial number of the PBX subscriber used in line
hunting. The line hunting mode is configured by running ADD PBX or MOD PBX. When a call is addressed to the PBX
pilot number, the system selects a proper line hunting serial number based on the line hunting mode. Thus, the call
is connected to the corresponding subscriber.
Copyright by Huawei
- 40 -
Command Description
IMPORTANT: PBX subscribers are, first of all, SIP or H248 subscribers. So before do this procedure, the subscribers
must be created by following the procedure described on the Chapter 1.1 or 1.2.
USE ME:MENAME=WORKFLOW;
Description: For PBX and Centrex service provisioning, the MENAME must be WORKFLOW, it specifies the
command will be performed in service flow mode. In service flow mode the command will be sent to both two ATS
sites in one redundancy group. Here, this parameter should be set to WORKFLOW, as the fixed value.
The MENAME with WORKFLOW value can only be used when perform on SPG as a Batch Task. In soap interface
between BSS and SPG, only need to specify the MEGROUP with the ATS_VPBX value. Only Virtual PBX
ADD/RMV/MOD/LST PBX, ADD/RMV/MOD/LST PBXSBR need to follow the following principle, for the soap format
detail, please refer <ATS9900 Service Provisioning Interface.chm>.
ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=1,SNDP=2,CHT=0;
Description: This command is used to add a PBX service data record to the configuration database. To add a PBX
service data record is to configure a PBX group, so that subscribers in the group can be selected to answer calls.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined
by the user policy configuration. For this issue, there is a redundancy ME group named ATS_VPBX. Here, this
Copyright by Huawei
- 41 -
A PBX pilot number can also be a number that does not exist in the subscriber data table. Such a PBX pilot number is
only an access code, and cannot be defined as an ordinary subscriber number by running ADD SBR.
QUL (V): It specifies whether the PBX group supports the queuing function. If the parameter is set to 1 (YES), it
indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy,
then the ATS adds the call to the call queue instead of playing the busy tone to the caller. When subscribers in the
PBX group become idle, the ATS connects the calls in the queue to the idle subscribers according to the "first in, first
out" principle. If the parameter is set to 0 (NO), it indicates that when a call is addressed to the PBX pilot number
and all the subscribers in the PBX group are busy, and then the ATS releases the call directly. The recommend
configuration is set this parameter to 1 (YES) for all the cases.
SGM (V): It specifies the mode in which the ATS selects a subscriber for answering a call addressed to the PBX pilot
number. Options:
MIN(FROM_SMALL_TO_LARGE): The ATS always selects the subscriber with the minimum equipment ID. This
sequences that the PBX subscribers are added by running ADD PBXSBR or MOD PBXSBR). After being selected to
answer calls and then released, the subscribers are queued again in the same way. Each release subscriber is added
to the end of the queue in turn automatically. After all the subscribers in the previous queue are selected, the ATS
selects the subscribers in the current queue. The recommended value for this parameter is 0 (MIN FROM_SMALL_TO_LARGE), but it can be configured according to subscriber requirement.
MDF (V): It specifies whether the ATS provides the simultaneous ringing function for the PBX pilot number. The
default value is 0 (NO), which indicates that when a call is addressed to the PBX pilot number, the idle subscribers in
the PBX group are selected based on the configured line hunting mode. If the parameter is set to 1 (YES), it indicates
that when a call is addressed to the PBX pilot number, the phones of all the idle subscribers in the PBX group ring
simultaneously. The recommended value for this parameter is 0 (NO), but it can be configured according to
subscriber requirement.
PAC (V): It specifies whether the ATS displays the PBX pilot number to the callee when a PBX subscriber makes a call.
For PBX group where the associated numbers are virtual (DLH), this value must be 1 (YES).
SNDP (V): It specifies whether the ATS adds the pilot number AVP to be sent to the CCF or the OCS, for charging
issues. Note that the operation specified by the parameter is different from the operation specified by Use pilot
number as caller number. Send pilot number mode controls only the contents of the AVP to be sent to the CCF or
the OCS. Options:
DNTH(DO_NOTHING): The system performs the processing as that carried out for an ordinary subscriber.
SDPL(SEND_PILOT): The system sends the PBX pilot number during the charging.
RPLC(REPLACE_CALLER_NUM): The system records the PBX pilot number into original caller AVP during the charging.
For PBX group where the associated numbers are virtual (DLH), this value must be 2 (REPLACE_CALLER_NUM).
Copyright by Huawei
- 42 -
CHT (V): It indicates whether the PBX group supports non-pilot number line hunting. If this parameter is set to 1
(Yes), the system performs line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to a pilot number. If this parameter is set to 0 (No), the
system does not perform line hunting in a call addressed to a non-pilot number in the PBX group, and the service
experience is the same as that provided in a call addressed to an ordinary subscriber. The recommended value for
this parameter is 0 (NO), but it can be configured according to subscriber requirement.
Description: This command is used to add a PBX subscriber data record to the configuration database. To add a PBX
subscriber data record is to add a PBX subscriber and configure the attributes of the PBX subscriber.
NOTE: the virtual number provisioning has defined with GVT Engineering according to the follow standard:
IMPU=PilotNumber+XXX, where XXX is an extension from 100 to 199 (to do not conflict with One-number
extensions). To facilitate the operations, the first virtual number which occupies the PSN 1, will be created with the
extension 101, for PSN 2, the extension is 102 and so on.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by
the user policy configuration. For this issue, there is a redundancy ME group named ATS_VPBX. Here, this
parameter should be set to ATS_VPBX, as the fixed value.
IMPU (V): It defines an IMPU for a subscriber in the ATS9900 configuration database. Its value can be in TEL URI or
SIP URI format.
GDN (V): It specifies the pilot number of the PBX group to which the subscriber belongs. The parameter must be
defined by running ADD PBX before being referenced here.
PSN (V): This is the Line hunting serial number. It specifies the serial number of the PBX subscriber used in line
hunting. The line hunting mode is configured by running ADD PBX or MOD PBX. When a call is addressed to the PBX
pilot number, the system selects a proper line hunting serial number based on the line hunting mode. Thus, the call
is connected to the corresponding subscriber.
Copyright by Huawei
- 43 -
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",CSC=1029,LMTGRP=65534;
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSNPTY=0;
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSNPTY=0;
Description: This command is used to remove the authority to use the feature.
Copyright by Huawei
- 44 -
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSNPTY (V): This is the supplementary service Conference Call Right, You must set 0 to deactivate, 1 to
activate the feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCW=0;
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCW (V): This is the supplementary service Call Waiting Right, You must set 0 to deactivate, 1 to activate the
feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCFU=0;
Copyright by Huawei
- 45 -
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCFU (V): This is the supplementary service Call Forwarding Unconditional Right, You must set 0 to deactivate,
1 to activate the feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br", CSC=1001;
Command Description
USE ME:MENAME=ATS;
Copyright by Huawei
- 46 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCBA=0;
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCBA (V): This is the supplementary service Outgoing Call Barring Right, You must set 0 to deactivate, 1 to
activate the feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCLIP=0;
Description: This command is used to remove the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIP (V): This is the supplementary service Calling Line Identification Presentation Right, You must set 0 to
deactivate, 1 to activate the feature.
Command Description
Copyright by Huawei
- 47 -
USE ME:MENAME=WORKFLOW;
Description: This command is used to remove a PBX subscriber data record from the configuration database.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined
by the user policy configuration. we have created a redundancy ME group named ATS_VPBX. Here, this parameter
Command Description
USE ME:MENAME=WORKFLOW;
Description: This command is used to remove a PBX subscriber data record from the configuration database.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined
by the user policy configuration. we have created a redundancy ME group named ATS_VPBX. Here, this parameter
Copyright by Huawei
- 48 -
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",COP="1234";
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",COP="1234";
Description: This command is used to modify parameters on an existent subscriber. In this case, this command line
is to change the password used for the supplementary service Outgoing Call Barring (Cadeado Eletronico).
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
COP (V): It specifies the call-out password of a subscriber. This parameter is used in the Outgoing Call Barring
service. For this project, the standard is a numeric sequence with four digits.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to check if the subscriber has the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the Call Waiting Right feature.
DSP COMSS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Copyright by Huawei
- 49 -
Description: This command is used to display all common supplementary service for a subscriber, if the SS appears
on the command result, it means that its activated.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to
chapter 1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the Call Waiting Right feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to check if the subscriber has the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the Conference Call Right feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
Copyright by Huawei
- 50 -
LST SBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with
service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to
indicate that the subscriber has the service authority.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this command, look for these parameters:
Call Forwarding Unconditional to Voice Mailbox Right: It specifies the Call Forwarding Unconditional to
Voice Mailbox (CFUVM) service right of a subscriber.
Call Forwarding Busy to Voice Mailbox Right: It specifies the Call Forwarding Busy to Voice Mailbox (CFBVM)
service right of a subscriber.
Call Forwarding No Reply to Voice Mailbox Right: It specifies the Call Forwarding No Reply to Voice Mailbox
(CFNRVM) service right of a subscriber.
DSP COMSS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to display all common supplementary service for a subscriber, if the SS appears
on the command result, it means that its activated.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this command, look for these parameters:
Call Forwarding Unconditional to Voice Mailbox Right: It specifies the Call Forwarding Unconditional to
Voice Mailbox (CFUVM) service right of a subscriber.
Call Forwarding Busy to Voice Mailbox Right: It specifies the Call Forwarding Busy to Voice Mailbox (CFBVM)
service right of a subscriber.
Call Forwarding No Reply to Voice Mailbox Right: It specifies the Call Forwarding No Reply to Voice Mailbox
(CFNRVM) service right of a subscriber.
Command Description
USE ME:MENAME=ATS;
Copyright by Huawei
- 51 -
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to check if the subscriber has the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this feature, check if the subscriber contains the Call Forwarding Unconditional Right
feature.
DSP CFU:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to display the configuration of the CFU service, if its activated or deactivated.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
USE ME:MENAME=ATS;
LST SBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with
service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to
indicate that the subscriber has the service authority.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
*** For information about this command, look for the parameter Call source code.
Copyright by Huawei
- 52 -
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the Calling Line Identification
Presentation Right feature.
Command Description
USE ME:MENAME=ATS;
or
Description: This command is used to list PBX subscriber data records in the configuration database.
To list the brief information about all PBX subscriber data records, do not specify any parameter.
To list the detailed information about a specific PBX scriber data record, specify IMPU.
MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the
specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined
Copyright by Huawei
- 53 -
by the user policy configuration. we have created a redundancy ME group named ATS_VPBX. Here, this parameter
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the Outgoing Call Barring Right
feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCFU=1;
Copyright by Huawei
- 54 -
Description: Allow the user to use the Call Forwarding Unconditional supplementary Service.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
NSCFU (V): This is the supplementary service Call Forwarding Unconditional and has two conditions, 0 to
deactivate the feature, 1 to activate it.
Description: Register the Call Forwarding Unconditional supplementary Service on IMS system.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
BSV (F): Means the Basic Service to apply the feature, it specifies the media type. Only the calls with selected
media types are forwarded. This parameter will be fixed in all the cases.
BSG (F): Means the Basic Service Group, and for this network it is configured for group TS11 (telephony services)
only.
DIMPU (V): This is the destination number, and the format can be SIP URI or TEL URI. For this project, we will use
TEL URI format, and the number must follow the same dialing rules as the current dialing plan. For example, if its
a CFU to a local number, it must contain 8 digits, if LDN, must contain 0+CSP+AC+number
NOTIFYCALLER (F): It specifies whether to notify the caller when a call is forwarded unconditionally. For this
project , it is set as NO in all the cases.
PRVTOCER (V): It specifies whether to include the Privacy parameter to the History-Info header field (containing
the forwarded-to number) of the 181 message that is sent to the caller when the AS of the service subscriber
triggers the call forwarding service. Now we will use this parameter fixed for all cases, but in the future, if GVT
decides to mark it on the bill, it can be set to other values. The list of values can be obtained on the Huawei IMS
documentation or in the SPG command help.
PRVTODES (V): It specifies whether to include the Privacy parameter to the History-Info header field (containing
the service subscriber number) of the INVITE message that is sent to the forwarded-to subscriber when the AS of
the service subscriber triggers the call forwarding service. Now we will use this parameter fixed for all cases, but in
the future, if GVT decides to mark it on the bill, it can be set to other values. The list of values can be obtained on
the Huawei IMS documentation or in the SPG command help.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
Copyright by Huawei
- 55 -
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",NSFAX=1;
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
PRK_SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",STYPE=NOALM,TREAT=PLAYTONEANDRELEASE;
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
Copyright by Huawei
- 56 -
RES_ PRKSBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST_ PRKSBR:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: This command is used to list the status of the subscriber with temporary suspension, if the service is
activated or deactivated.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
1.39 MSAN Users Change the Access Part and keep the Subscriber Number
/****************************AT SPG web portal********************************/
USE ME:MENAME=M2000;
MOD ASBR: SOFTXIP="10.140.72.224", PUI="sip:+556239901189@ims1.gvt.net.br", REGTP=SINGLE, TEN=EID,
EID:10.140.72.130:2944, TID="1";
Command Description
USE ME:MENAME=M2000;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the
Management Server M2000.
MOD ASBR: SOFTXIP="10.140.72.224", PUI="sip:+556239901189@ims1.gvt.net.br", REGTP=SINGLE, TEN=EID,
EID:10.140.72.130:2944, TID="1";
Description: It is a configuration command, and is used to add A-CSCF subscriber data in the configuration
database. This function is used to configure functions provided by the AGCF.
Copyright by Huawei
- 57 -
SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation.
PUI(V):Public User ID,The user ID used outside the IMS Core is the public user ID that is used to communicate with
others. The value of this parameter must be the same as the user ID defined on the HSS and ATS.
REGTP (F): Register type. It will be SINGLE register in all situations. This parameter will be fixed.
TEN (V): It specifies the type of the equipment name. This parameter can be EID (Equipment ID) or EDESC
(Equipment Description). Normally the parameter EID is used for this command.
EID (V): Equipment ID. This is the identification of the Access Node inside the IMS. The notation is the IP address of
the AG(MSAN) + : + the signaling port. Example: 10.140.72.130:2944, where 10.140.72.130 is the IP of Keymile
MSAN and 2944 is the signaling port. We can compare it as the V5 ID of the V5 interface.
INFORMATION: IF the subscriber will keep in the same MSAN, but will just change the TID, there is no need to
inform this parameter.
TID (V): Terminal ID. It specifies the physical port number of the MG to which the ESL subscriber belongs. Its
the identification of the subscriber port for the corresponding Equipment ID. We can compare it to the L3ADDR on
V5 interface.
1.40 MSAN Users Change the Subscriber Number and keep Access Part
IMPORTANT: For this operation, There is no way to change the number, because the subscriber on ATS is
associated with a record on HSS that uses the subscriber number as index, so a new configuration on HSS
side is also needed. For this reason, the procedure in this case is to remove the subscriber completely and
create it again using the new number. For this operation, please refer to Chapters below:
Chapter 1.4 - Remove H.248 Subscriber
Chapter 1.4 - Create New H.248 subscriber
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSCLIR=1;
Description: This command is used to enable the authority to use the feature.
Copyright by Huawei
- 58 -
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIR (V): This is the supplementary service Calling Line Identification Restriction Right, You must set 0 to
deactivate, 1 to activate the feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SS:IMPU="sip:+556239901189@ims1.gvt.net.br",NSRIO=1;
Description: This command is used to enable the authority to use the feature.
IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter
1.1 Create New SIP subscriber.
NSCLIR (V): This is the supplementary service Calling Line Identification Restriction Override Right, You must set
0 to deactivate, 1 to activate the feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Copyright by Huawei
- 59 -
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the Calling Line Identification
Restriction Right feature.
Command Description
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
LST SS:IMPU="sip:+556239901189@ims1.gvt.net.br";
Description: List the supplementary services currently configured for this subscriber.
IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP
subscriber.
*** For information about this feature, check if the subscriber contains the Calling Line Identification
Restriction Override Right feature.
- 60 -
RSNAME (V): It specifies the route select name lead to the CTA_02 which connect to the announcement
equipment. All the RSNAME for each site you could get from the table below:
Site
RSNAME
SPO
RS_209
RJO
RS_259
CTA
RS_259
MGA
RS_209
BHE
RS_209
RCE
RS_259
DNCATCODE (V): It specifies the A numbers number Category code, this value must equal to 5858.
RSNAME
SPO
RS_209
RJO
RS_259
CTA
RS_259
MGA
RS_209
BHE
RS_209
RCE
RS_259
MINL (V): This parameter specifies the minimum number length of the A number with the specific call prefix, this
value must equal to the length of the A number.
MAXL (V): This parameter specifies the maximum number length of the A number with the specific call prefix, this
value must equal to the length of the A number.
DNCATCODE (V): It specifies the A numbers number Category code, this value must equal to 5858.
The other parameter in this command you do not need to change.
Copyright by Huawei
- 61 -
Location
City
Code
CNL
AC
SPO7
SAO PAULO
ARUJA
BARUERI
BIRITIBA-MIRIM
CAIEIRAS
CAJAMAR
CARAPICUIBA
COTIA
DIADEMA
EMBU
EMBU-GUACU
FERRAZ DE VASCONCELOS
FRANCISCO MORATO
FRANCO DA ROCHA
GUARAREMA
GUARULHOS
ITAPECERICA DA SERRA
ITAPEVI
ITAQUAQUECETUBA
SPO
AUJ
BRE
BMM
CER
CJR
CIV
COA
DDA
EMB
EBG
FAV
FAT
FCR
GRM
GRS
ICS
ITE
IAQ
11000
11048
11071
11082
11130
11132
11151
11176
11185
11202
11203
11220
11229
11227
11251
11892
11291
11294
11300
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
Copyright by Huawei
Tariff Location
Area Info in HSS
- 62 -
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
SPO_
AUJ_
BRE_
BMM_
CER_
CJR_
CIV_
COA_
DDA_
EMB_
EBG_
FAV_
FAT_
FCR_
GRM_
GRS_
ICS_
ITE_
IAQ_
Location
Index in CallSRC LDNSET
ATS
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
1101
1101
11
RJO6
CTA7
MGA4
RCE3
BHE4
JANDIRA
JUQUITIBA
MAIRIPORA
MAUA
MOGI DAS CRUZES
OSASCO
PIRAPORA DO BOM JESUS
POA
RIBEIRAO PIRES
RIO GRANDE DA SERRA
SALESOPOLIS
SANTA ISABEL
SANTANA DE PARNAIBA
SANTO ANDRE
SAO BERNARDO DO CAMPO
SAO CAETANO DO SUL
SAO LOURENCO DA SERRA
SUZANO
TABOAO DA SERRA
VARGEM GRANDE PAULISTA
RIO DE JANEIRO
NITERI
BELFORD ROXO
DUQUE DE CAXIAS
NOVA IGUAU
CURITIBA
ARAUCARIA
CAMPO LARGO
PINHAIS
PIRAQUARA
SAO JOSE DOS PINHAIS
ALMIRANTE TAMANDARE
COLOMBO
FAZENDA RIO GRANDE
CAMPO MOURAO
CIANORTE
MARIALVA
MARINGA
PAICANDU
PARANAVAI
SARANDI
UMUARAMA
RECIFE
JABOATAO DOS GUARARAPES
OLINDA
PAULISTA
CAMARAGIBE
CABO DE SANTO AGOSTINHO
BELO HORIZONTE
BETIM
CONTAGEM
JAD
JQB
MAR
MAU
MCZ
OCO
PPJ
POA
RPS
RGS
SEP
SBL
SPB
SNE
SBO
SCN
SALS
SZN
TBS
VPA
RJO
NRI
BERO
DQX
NIU
CTA
AUC
CLG
PNIS
PQA
SJP
ATT
CBX
FZR
CPM
CNE
MRV
MGA
PNU
PVA
SWW
UMR
RCE
JBO
OLD
PUI
CGB
CBO
BHE
BET
CEM
11318
11330
11358
11370
11381
11425
11480
11488
11528
11964
11582
11623
11589
11633
11548
11550
11564
11641
11644
12210
21000
21188
21037
21088
21199
41000
41049
41119
41486
41495
41585
41015
41161
41919
41122
41151
41382
41389
41447
41466
41628
41711
81000
81083
81103
81115
81200
81029
31000
31085
31856
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
21
21
21
21
21
41
41
41
41
41
41
41
41
41
44
44
44
44
44
44
44
44
81
81
81
81
81
81
31
31
31
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
21
21
21
21
21
412
412
412
412
412
412
412
412
412
448
447
442
442
442
444
442
446
812
812
812
812
812
812
31
31
31
JAD_
JQB_
MAR_
MAU_
MCZ_
OCO_
PPJ_
POA_
RPS_
RGS_
SEP_
SBL_
SPB_
SNE_
SBO_
SCN_
SALS
SZN_
TBS_
VPA_
RJO_
NRI_
BERO
DQX_
NIU_
CTA_
AUC_
CLG_
PNIS
PQA_
SJP_
ATT_
CBX_
FZR_
CPM_
CNE_
MRV_
MGA_
PNU_
PVA_
SWW_
UMR_
RCE_
JBO_
OLD_
PUI_
CGB_
CBO_
BHE_
BET_
CEM_
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
2101
2101
2101
2101
2101
4102
4102
4102
4102
4102
4102
4102
4102
4102
4408
4407
4402
4402
4402
4404
4402
4406
8102
8102
8102
8102
8102
8102
3101
3101
3101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
1101
2101
2101
2101
2101
2101
4102
4102
4102
4102
4102
4102
4102
4102
4102
4408
4407
4402
4402
4402
4404
4402
4406
8102
8102
8102
8102
8102
8102
3101
3101
3101
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
21
21
21
21
21
41
41
41
41
41
41
41
41
41
44
44
44
44
44
44
44
44
81
81
81
81
81
81
31
31
31
- 63 -
Barring
Group
65534
2
3
4
65534
65534
17
Enum
Index
65535
65535
65535
65535
15
16
65535
19
65534
19
20
21
22
23
24
20
21
22
23
24
65535
65535
65535
65535
65535
25
65534
25
30
65534
30
31
65534
31
32
65534
32
33
34
41
65534
65534
41
33
34
65535
71
71
65535
72
72
72
NCOS
Call
Source
Refer to
Table 1
Description
Liberado TOTAL
Bloqueio do DDD 025 e DDI 0025, para outras operadoras pode fazer
Bloqueio do 0300; 0500; 0900
Bloqueio do DDD 025; DDI 0025; 0300; 0500; 0900
Assinante disca sem CSP para DDD (todos) e DDG, aps inserido CSP 25 (ligue fcil)
Transforma CSP todas as regies; CSP a cobrar para todos e CSP todos os paises em 025
Liberado somente para 0800 e 000x (prefixo Webline local)
Transforma CSP DDD todas as regies e CSP todos os paises em CSP 25. Nos casos de
chamadas a cobrar considerado o CSP originalmente discado pelo cliente
Liberado Chamadas locais ( 2 at 6 ) e 078 TRANSMIT
Bloqueio para celular 7; 8; 91 a 99
Bloqueio do DDD 025; DDI 0025 e para celular 7; 8; 91 a 99
Bloqueio para celular 7; 8; 91 a 99; 0300;; 0500; 0900
Bloqueio do DDD 025; DDI 0025 e para celular 7; 8; 91 a 99; 0300; 0500; 0900
Liberado somente 11x; 190 e 193; 080005xxxxx; caso assinante tente ligar transferido
para 08006001325
Igual NCOS 19 xxx_POS mais acesso internacional 100% liberado (no transforma csp
pra internacional)
Igual NCOS 16 xxx_POS mais acesso internacional 100% liberado (no transforma csp
pra internacional)
Igual NCOS 1 xxx_POS mais acesso internacional 100% liberado (no transforma csp pra
internacional)
Igual NCOS 1 Corporativos PBXRAMAL + 100% LDI Liberado
Igual NCOS 16 Corporativos PBXRAMAL + 100% LDI Liberado
Bloqueio para celular 7; 8; 91 a 99 - Corporativos PBXRAMAL com TIC - CLISERV 1041
Limitador Smart Credits para assinantes com NCOS 1: Bloqueio de VC1 + VC2 e VC3 com
CSP 25
Limitador Smart Credits para assinantes com NCOS 15: Bloqueio de VC1 + VC2 e VC3
com CSP 25
2.3.2 NCOS 2
USE ME: MENAME=ATS;
MOD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=2,
ENUMIDX=65535;
Copyright by Huawei
- 64 -
2.3.3 NCOS 3
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=3,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the call source according the Table 1.
2.3.4 NCOS 4
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=4,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.5 NCOS 15
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=15;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.6 NCOS 16
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=16;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
Copyright by Huawei
- 65 -
2.3.7 NCOS 17
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=17,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.8 NCOS 19
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=19;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.9 NCOS 20
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=20,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.10 NCOS 21
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=21,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.11 NCOS 22
USE ME: MENAME=ATS;
Copyright by Huawei
- 66 -
2.3.12 NCOS 23
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=23,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.13 NCOS 24
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=24,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.14 NCOS 25
USE ME:MENAME=HSS;
ADD HSIFC:IMPU="sip:+556239901189@ims1.gvt.net.br", SIFCID=625;
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=25;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the call source according the Table 1
2.3.15 NCOS 30
USE ME: MENAME=ATS;
Copyright by Huawei
- 67 -
2.3.16 NCOS 31
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=31;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.17 NCOS 32
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=32;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.18 NCOS 33
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=33;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.19 NCOS 34
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534,
ENUMIDX=34;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Copyright by Huawei
- 68 -
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.20 NCOS 41
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=41,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.21 NCOS 71
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=71,
ENUMIDX=65535;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
2.3.22 NCOS 72
USE ME: MENAME=ATS;
ADD SBR:IMPU="sip:+556239901189@ims1.gvt.net.br",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=72,
ENUMIDX=72;
MOD SS:IMPU="sip:+ 556239901189@ims1.gvt.net.br",NSCLIP=1,NSSCCA=1;
Where : XX is the local DN set, YYYY is the callsource according the Table 1
- 69 -
Command Description
USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
ADD HSIFC:IMPU="sip:+556239911199@ims1.gvt.net.br", SIFCID=629;
Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with
a maximum of eight shared iFC sets.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is AC+P, and P can assume the follow values:
1 - For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
9 - For traffic terminated on ATS, used only for General Block service, ex 629
Here an IFC set with index 629 was added to the subscriber, for the purpose of triggering the call to ATS, which the
callee number is Emergency Number, and ATS analyses the callee number, decide the call will reject or not.
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR: IMPU="sip:+556239911199@ims.gvt.net.br", OUTRST=NO, INRST=YES, LMTGRP=9001;
- 70 -
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
NSSCCA (F): It specifies the Collect Call (SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. Here this parameter should be set to 0.
Unblock
/****************************AT SPG web portal********************************/
USE ME:MENAME=HSS;
RMV HSIFC: IMPU=" sip:+556239911199@ims.gvt.net.br ", SIFCID=629;
USE ME: MENAME=ATS;
MOD SBR:IMPU="sip:+556239911199@ims.gvt.net.br", OUTRST=NO, INRST=NO, LMTGRP=65534;
MOD SS:IMPU="sip:+556239911199@ims.gvt.net.br", NSSCCA=1;
Command Description
USE ME:MENAME=HSS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home
Subscriber Server (HSS).
RMV HSIFC:IMPU="sip:+556239911199@ims1.gvt.net.br", SIFCID=629;
Description (V): Remove a shared initial filter criteria (iFC) set for the specified IMPU.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
SIFCID (V): This is an index value. GVT standard is AC+P, and P can assume the follow values.
1-For intra-office traffic, used for Retail and Corporate, ex: 621
7- For traffic terminated on UGC, used only for Corporate, ex: 627
8 - For traffic terminated on BCF, used only for Vox IP service, ex 628
9 - For traffic terminated on ATS, used only for General Block service, ex 629
Here this parameter should be the same as we added in the Block, using command ADD HSIFC.
USE ME:MENAME=ATS;
Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application
for Telephony Services (ATS).
MOD SBR: IMPU="sip:+556239911199@ims.gvt.net.br", OUTRST=NO, INRST=NO, LMTGRP=65534;
- 71 -
OUTRST (V): It specifies the type of the carrier-determined barring service and the outgoing call restriction status of
a subscriber. If "NO" is selected, all outgoing calls of a subscriber are permitted; if "YES" selected, all outgoing calls
of a subscriber are rejected. Here this parameter should be set to NO.
INRST (V): It specifies the type of the carrier-determined barring service and the incoming call restriction status of a
subscriber. If "NO" is selected, all incoming calls of a subscriber are permitted; if "YES" selected, all incoming calls of
a subscriber are rejected. Here this parameter should set to NO.
LMTGRP (V): It specifies the restriction group number of a specified subscriber. This parameter is used for the
Outgoing Call Barring: Fixed (OCB-F) service. If the value of Restriction group is the same as the value of Restriction
group defined by running ADD CLRGRP in the MML Command - ATS9900 window, the call is restricted. Here should
be set as wildcard value 65534 since subscribe is unblocked.
MOD SS:IMPU="sip:+556239911199@ims.gvt.net.br", NSSCCA=1;
Description: This command is used to modify supplementary service authority data of a subscriber.
IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive.
Tel URI must fill the number in the format tel:+55 AC number(8 digits)
Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.
NSSCCA (F): It specifies the Collect Call (SCCA) service right of a subscriber. This parameter is one of the elements
Supplement Service Right. Here this parameter should be set as GVTs default value 1.
Copyright by Huawei
- 72 -