You are on page 1of 11

Erw Pipe

With many different application and uses that can be achieved from using round pipe
products, at GRP we manufactured our pipe from 2 3/8 OD to 24 OD in a variety
of length to over 100 feet using Electric Resistance Welding (ERW) methods.
As we strive to maintain to the highest standard quality, our ERW tubular pipe complied with different local and international standard specifications for its varying application requirements.
The surface finish for this product is available in bare or in coated form and the processing will be carried out in our facility. For the application carrying flow of water/
liquid material, we can also perform hydrostatic testing on the products to ensure
leakage-proof in its operations.
Standard & Specification

Available Size
Annual Capacity

: ASTM A 53 (A),
BS 1387:1985 Heavy Series (H),
BS EN 10255:2004 (E),
JIS G 3444 STK 290, JIS G 3444 STK 400,
JIS G 3452 SGP Black And Galvanized Pipe
JIS G 3454 STPG 370,
SNI-07-0068-1987 PKB 30,
SNI-07-0068-1987 PKB 41.
: 1/4 inch OD to 6 inch OD (Outside Diameter)
: 72.000 MT/Year

ASTM A 53 (A)
Nominal Size
DN

NPS

Outside
Diameter
(mm)

20

3/4

26.7

2.87

40

25

33.4

3.38

32

1 1/4

42.2

3.56

40

1 1/2

48.3

50

65

2 1/2

80

100

Thickness
(mm)

Sch

Test Pressure
Psi

Kg/cm2

700

49

40

700

49

40

1200

85

3.68

40

1200

85

60.3

3.91

40

2300

161

73

5.16

40

2500

175

3.18

1290

91

3.96

1600

112

4.78

1930

136

5.49

40

2220

156

3.18

1000

70

3.96

1250

88

4.78

1500

105

5.56

1750

123

6.02

40

1900

134

88.9

114.3

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Carbon (C)
Phosphor (p)
Sulfur (s)

: 0.25 % max
: 0.05 % max
: 0.045 % max

Mechanical
Tensile Strength
Yield Strenth

: 330 N/mm2 min


: 205 N/mm2 min
: 22 % min

Tolerance
Thickness
Length
Outside Diameter
OD 48.3 mm
OD 60.3 mm
Standar length of Pipe

: 12.5 %
: 2%
: 0.4 mm
:1%
: 6000 mm

BS 1387:1985
Nominal Size
DN
Thread
(mm)
Size R
50
65
80
100
125
150

2
2 1/2
3
4
5
6

Heavy (H)

Outside Diameter
Max
Min
(mm)
(mm)
60.8
76.6
89.5
114.9
140.6
166.1

59.8
75.4
88.1
113.3
138.7
164.1

Wall
Thickness
T (mm)

Psi

BAR

4.5
4.5
5.0
5.4
5.4
5.4

730
730
730
730
730
730

50
50
50
50
50
50

Carbon (C)
Phosphor (p)
Sulfur (s)

: 0.20 % max
: 0.045 % max
: 0.045 % max

Tensile Strength
Yield Strenth

: 330 ~ 460 N/mm2


: 195 N/mm2 min
: 22 % min

Medium (M)

Nominal Size
DN
Thread
(mm)
Size R
20
25
32
40
50
65
80
100
125
150

3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6

Outside Diameter
Max
Min
(mm)
(mm)
27.2
34.2
42.9
48.8
60.8
76.6
89.5
114.9
140.6
166.1

26.6
33.4
42.1
48
59.8
75.4
88.1
113.3
138.7
164.1

Wall
Thickness
T (mm)

Psi

BAR

2.6
3.2
3.2
3.2
3.6
3.6
4.0
4.5
5.0
5.0

730
730
730
730
730
730
730
730
730
730

50
50
50
50
50
50
50
50
50
50
Light (L)

Nominal Size
DN
Thread
(mm)
Size R
20
25
32
40
50
65
80
100

3/4
1
1 1/4
1 1/2
2
2 1/2
3
4

Outside Diameter
Max
Min
(mm)
(mm)
27.2
34.2
42.9
48.8
60.8
76.6
89.5
114.9

26.6
33.4
42.1
48
59.8
75.4
88.1
113.3

Tolerance

Wall
Thickness
T (mm)

Psi

BAR

2.3
2.9
2.9
2.9
3.2
3.2
3.2
3.6

730
730
730
730
730
730
730
730

50
50
50
50
50
50
50
50

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Thickness
Length
Standard length of pipe

: + Not Specied
: - 10 %
: 2%
: 6000 mm

BS EN 10255:2004 (E)
Nominal Size
DN
Thread
(mm)
Size R

Heavy Series (H)

Type L

Outside Diameter
Max
Min
(mm)
(mm)

Wall
Thickness
T (mm)

Psi

BAR

Nominal Size
DN
Thread
(mm)
Size R

Outside Diameter
Max
Min
(mm)
(mm)

Wall
Thickness
T (mm)

Psi

BAR

20

3/4

Specied
Outside
Diameter (mm)
26.9

27.3

26.5

2.3

730

50

50

Specied
Outside
Diameter (mm)
60.3

60.8

59.7

4.5

730

50

25

33.7

34.2

33.3

2.9

730

50

65

2 1/2

76.1

76.6

75.3

4.5

730

50

32

1 1/4

42.4

42.9

42

2.9

730

50

80

88.9

89.5

88

5.0

730

50

40

1 1/2

48.3

48.8

47.9

2.9

730

50

100

114.3

115

113.1

5.4

730

50

50

60.3

60.8

59.7

3.2

730

50

125

139.7

140.8

138.5

5.4

730

50

65

2 1/2

76.1

76.6

75.3

3.2

730

50

150

165.1

166.5

163.9

5.4

730

50

80

88.9

89.5

88

3.2

730

50

100

114.3

115

113.1

3.6

730

50

125

139.7

140.8

138.5

4.5

730

50

150

165.1

166.5

163.9

4.5

730

50
Medium Series (M)

Type L1

Nominal Size
DN
Thread
(mm)
Size R
20

3/4

Specied
Outside
Diameter (mm)
26.9

25

32

Outside Diameter
Max
Min
(mm)
(mm)

Wall
Thickness
T (mm)

Psi

BAR

20

3/4

Specied
Outside
Diameter (mm)
26.9

50

25

730

50

32

2.9

730

50

3.2

730

50

75.3

3.2

730

50

89.5

88

3.6

730

115

113.1

4.0

730

Wall
Thickness
T (mm)

Psi

BAR

26.5

2.6

730

50

33.7

34.2

33.3

3.2

730

50

1 1/4

42.4

42.9

42

3.2

730

50

40

1 1/2

48.3

48.8

47.9

3.2

730

50

50

60.3

60.8

59.7

3.6

730

50

65

2 1/2

76.1

76.6

75.3

3.6

730

50

50

80

88.9

89.5

88

4.0

730

50

50

100

114.3

115

113.1

4.5

730

50

125

139.7

140.8

138.5

5.0

730

50

150

165.1

166.5

163.9

5.0

730

50

26.5

2.3

730

50

33.7

34.2

33.3

2.9

730

1 1/4

42.4

42.9

42

2.9

40

1 1/2

48.3

48.8

47.9

50

60.3

60.8

59.7

65

2 1/2

76.1

76.6

80

88.9

100

114.3

Type L2

Outside Diameter
Max
Min
(mm)
(mm)

Outside Diameter
Max
Min
(mm)
(mm)
27.3

27.3

Nominal Size
DN
Thread
(mm)
Size R

Nominal Size
DN
Thread
(mm)
Size R

Wall
Thickness
T (mm)

Psi

BAR

20

3/4

Specied
Outside
Diameter (mm)
26.9

27.3

26.5

2.3

730

50

25

33.7

34.2

33.3

2.6

730

50

32

1 1/4

42.4

42.9

42

2.6

730

50

40

1 1/2

48.3

48.8

47.9

2.9

730

50

50

60.3

60.8

59.7

2.9

50

65

2 1/2

76.1

76.6

75.3

3.2

730

50

80

88.9

89.5

88

3.2

730

50

100

114.3

115

113.1

3.6

730

50

JIS G 3444 STK 290


A

Outside
Diameter
(mm)

15
20

1/2
3/4

21.7
27.2

25
32

1
1 1/4

34
42.7

40

1 1/2

48.6

Nominal Size

50

60.5

65

2 1/2

76.3

80

89.1

100

114.3

125

139.8

150

165.2

Thickness
(mm)
2.0
2.0
2.3
2.3
2.3
2.5
2.3
2.5
2.8
3.2
2.3
3.2
4.0
2.8
3.2
4.0
2.8
3.2
3.2
3.5
4.5
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.1

Cross
Area cm2
1.238
1.583
1.799
2.291
2.919
3.157
3.345
3.621
4.029
4.564
4.205
5.760
7.100
6.495
7.349
9.085
7.591
8.636
11.17
12.18
15.52
15.4
17.07
19.13
25.22
22.72
25.16
30.01
35.26

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Phosphor (p)
Sulfur (s)

: 0.05 % max
: 0.05 % max

Tensile Strength
Yield Strenth

: 294 N/mm2 min


: : 21 % min

Tolerance
Thickness
Length
Outside Diameter
OD 50 mm
OD 50 mm
Standard length of pipe

: 10 %
: 2%
: 0.5 mm
:1%
: 6000 mm

JIS G 3444 STK 400


A

Outside
Diameter
(mm)

40

1 1/2

48.6

50
65

2
2 1/2

60.5
76.3

80

89.1

100

114.3

Nominal Size

125

139.8

150

165.2

Thickness
(mm)
2.8
3.2
3.2
2.8
3.2
2.8
3.2
3.2
3.5
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.1

Cross
Area cm2
4.029
4.564
5.760
6.495
7.349
7.591
8.636
11.17
12.18
15.4
17.07
19.13
25.22
22.72
25.16
30.01
35.26

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Carbon (c)
Phosphor (p)
Sulfur (s)

: 0.25 % max
: 0.04 % max
: 0.04 % max

Tensile Strength
Yield Strenth

: 400 N/mm2 min


: 235 N/mm2 min
: 14 % min

Tolerance
Thickness
Length
Outside Diameter
OD 50 mm
OD 50 mm
Standard length of pipe

: 10 %
: 2%
: 0.5 mm
:1%
: 6000 mm

SNI 07-0068-1987 PKB 30

Outside
Diameter
(mm)

15
20

1/2
3/4

21.7
27.2

25
32

1
1 1/4

34
42.7

40

1 1/2

48.6

Nominal Size

50

60.5

65

2 1/2

76.3

80

89.1

100

114.3

125

139.8

150

165.2

Thickness
(mm)
2.0
2.0
2.3
2.3
2.3
2.8
2.3
2.8
3.2
2.3
3.2
4.0
2.8
3.2
4.0
2.8
3.2
4.0
3.2
3.6
4.5
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.0

Cross
Area cm2
1.238
1.583
1.799
2.291
2.919
3.157
3.345
4.029
4.564
4.205
5.760
7.100
6.465
7.439
9.085
7.591
8.936
10.690
11.170
12.520
15.520
15.400
17.070
19.130
25.220
22.720
25.160
30.010
34.790

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Phosphor (p)
Sulfur (s)

: 0.05 % max
: 0.05 % max

Tensile Strength
Yield Strenth

: 294 N/mm2 min


: : 21 % min

Tolerance
Thickness < 3 mm
3 mm s/d 12 mm
Length
Outside Diameter
OD 50 mm
OD 50 mm
Standard length of pipe

: 0.3mm
: 10 %
: 2%
: 0.5 mm
:1%
: 6000 mm

SNI 07-0068-1987 PKB 41

Outside
Diameter
(mm)

32
40

1 1/4
1 1/2

42.7
48.6

50

60.5

65

2 1/2

76.3

80

89.1

100

114.3

125

139.8

150

165.2

Nominal Size

Thickness
(mm)
2.8
2.8
3.2
2.3
3.2
2.8
3.2
2.8
3.2
3.2
3.6
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.0

Cross
Area cm2
3.510
4.029
4.564
4.205
5.760
6.465
7.349
7.591
8.936
11.170
12.520
15.400
17.070
19.130
23.600
22.720
25.160
30.010
34.790

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Carbon (C)
Phosphor (p)
Sulfur (s)

: 0.25 % max
: 0.04 % max
: 0.04 % max

Tensile Strength
Yield Strenth

: 402 N/mm2 min


: 235 N/mm2 min
: 14 % min

Tolerance
Thickness < 3 mm
3 mm s/d 12 mm
Length
Outside Diameter
OD 50 mm
OD 50 mm
Standard length of pipe

: 0.3mm
: 10 %
: 2%
: 0.5 mm
:1%
: 6000 mm

SNI - 07 - 0039 - 1987 (Medium)


Nominal Size

Galvanized Pipe

Outside Diameter (mm)

Test Pressure

Thickness
(mm)

Psi

Kgf/cm2

Max

Min

20

3/4

27.2

26.4

2.7

710

50

25

34.2

33.4

3.25

710

50

32

1 1/4

42.9

42.1

3.25

710

50

40

1 1/2

48.80

48.0

3.25

710

50

50

60.8

59.8

3.65

710

50

65

2 1/2

76.6

75.4

3.65

710

50

80

89.5

88.1

4.05

710

50

100

114.9

113.3

4.5

710

50

125

140.6

138.7

4.85

710

50

250

166.1

164.1

4.9

710

50

Phosphor (p)
Sulfur (s)

: 0.05 % max
: 0.05 % max

Tensile Strength

: 33 Kgf/mm2 min
: 20 % min

Tolerance
Thickness
Length
Weight with zinc
Standard length of pipe

: + Unlimited
: - 10%
: 2%
: 300 gr/m2
: 6000 mm

Phosphor (p)
Sulfur (s)

: 0.04 % max
: 0.04 % max

Tensile Strength

: 294 N/mm2 min


: 24 % min

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

JIS G3452 SGP

Black Galvanized Pipe

Nominal Size
A

Outside
Diameter
(mm)

20

3/4

27.2

2.8

365

25

25

34

3.2

365

25

32

1 1/4

42.7

3.5

365

25

40

1 1/2

48.6

3.5

365

25

50

60.5

3.8

365

25

65

2 1/2

76.3

4.2

365

25

Test Pressure

Thickness
(mm)

Psi

Kgf/cm2

80

89.1

4.2

365

25

100

114.3

4.5

365

25

125

139.8

4.5

365

25

150

165.2

5.0

365

25

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Tolerance
Thickness
Length
Weight with zinc
Outside Diameter
OD 50 mm
OD 50 mm
Standard length of pipe

: + Not Specied
: - 12.5%
: 2%
: 400 gr/m2
: 0.5 mm
:1%
: 6000 mm

JIS G 3455 STPG 370


Nominal Size
DN

NPS

Outside
Diameter
(mm)

20
25
32
40
50

3/4
1
1 1/4
1 1/2
2

27.2
34
42.7
48.6
60.5

65

2 1/2

76.3

80

89.1

100

114.3

125

139.8

250

165.2

Thickness
(mm)

Sch

2.90
3.40
3.60
3.70
3.20
3.90
4.50
5.20
4.50
5.50
4.90
6.00
5.10
6.60
5.50
7.10

40
40
40
40
20
40
20
40
20
40
20
40
20
40
20
40

Test Pressure
Psi

Kgf/cm2

59
59
59
59
34
59
34
59
34
59
34
59
34
59
34
59

60
60
60
60
35
60
35
60
35
60
35
60
35
60
35
60

Carbon (C)
Phosphor (p)
Sulfur (s)

: 0.25 % max
: 0.04 % max
: 0.04 % max

Tensile Strength
Yield Strenth

: 370 N/mm2 min


: 215 N/mm2 min
: 21 % min

Tolerance
Thickness
Length
Outside Diameter
OD 50 mm
OD 50 mm
Standard length of pipe

: 10mm
: 2%
: 0.5 mm
:1%
: 6000 mm

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

Electrical Resistance Welded Furniture Pipe


Size (Inch)

5/8
3/4
7/8
1
1 1/4
1 1/2
2

OD (Outside Diameter)

Test Pressure

15.8
19.1
22.2
25.4
31.8
38.1
50.8

NOTE : Non standard sizes are available upon request and subject to minimum quantity.

1.0 ~ 2.0
1.0 ~ 2.0
1.0 ~ 2.0
1.0 ~ 2.5
1.0 ~ 3.0
1.0 ~ 3.0
2.0 ~ 3.0

Phosphor (p)
Sulfur (s)

: 0.05 % max
: 0.05 % max

Tensile Strength

: 294 N/mm2 min


: 21 % min

Tolerance
Thickness
Length
Outside Diameter
OD 50 mm
OD 50 mm

: 10 %
: 2%
: 0.5 mm
:1%

JIS G 3445

Carbon Steel Tube For Machine Structural Purposes

Grade

C
Si Mn
P
S
Max Max Max Max Max

Ts Min

Tensile Test
Ys Min

N/mm2

N/mm2

Test no 12

Test no 5

El Min (%)

Flatning Test
(D: Outside Diameter)

Bending Test
Bending Angle

Inside Radius

Grade 11

STKM 11 A

0.12 0.35 0.6 0.04 0.04

290

35

30

180o

4D

Grade 12

STKM 12 A

0.2

0.35 0.6 0.04 0.04

340

175

35

30

90

6D

Grade 12

STKM 12 B

0.2

0.35 0.6 0.04 0.04

390

275

25

20

90o

6D

Standard Tolerances
Division
No. 1
No. 2

No. 3

Tolerances on Outside Diameter


Under 50 mm
50 mm or over
Under 50 mm
50 mm or over
Under 25 mm
25 mm or over to and excl. 40 mm
40 mm or over to and excl. 50 mm
50 mm or over to and excl. 60 mm
60 mm or over to and excl. 70 mm
70 mm or over to and excl. 80 mm
80 mm or over to and excl. 90 mm
90 mm or over to and excl. 100 mm
100 mm or over
Tolerances length

Division
0.5 mm
1%
0.25 mm
0.5 %
0.12 mm
0.15 mm
0.18 mm
0.2 mm
0.23 mm
0.25 mm
0.3 mm
0.4 mm
0.5 mm

Tolerances on Wall Thickness


Under 4 mm

+ 0.6 mm
- 0.5 mm
+ 15 %
- 12.5 %

No. 1

4 mm or over

No. 2

Under 3 mm
3 mm or over

0.3 mm
10 %

No. 3

Under 2 mm
2 mm or over

0.15 mm
8%

2 % (Length mm x 2%)

If there is no specic agreement between the buyer and the manufacturer when the order is for outside diameter tolerance will be applied rule no. 1, and for wall thickness tolerance
will be applied rule no. 2

You might also like