You are on page 1of 1

ROD WRENCHES &

ROD ELEVATORS
DEAN BENNETT SUPPLY
Ph 800-621-4291

Page 60a
5 / 20 / 2013





Rod Wrenches for Wood Rod $ 84.00 Each
118RODWRENCH
138RODWRENCH
These rod wrenches are used to connect wood rod together. The design gives you a secure way to grip the
rod couplings to tighten them together.
Rod Elevator for Wood Rod and Fiberglass Rod
$ 211.00 NIXELEVATOR

This custom rod elevator is designed to lift and hold your wood or fiberglass pump
rod that has flats, when servicing your windmill well. Spring loaded fingers in the
front prevent your rod from sliding forward, making this a very secure method of
holding onto the rod while connecting the next length of rod to the rod in the well.
The heavy metal bail is designed to be secure with either the wood rod which has
flats on the area below the coupling, or with fiberglass rod that has flats on the
coupling. Our rod elevator is rated for up to 1200 pounds of non shock weight.

FIBERGLASS ROD HOLDERS
Fiberglass Rod Holders are available in 5/8" and 3/4" sizes.
These go under the rod coupling to support the rod while you put the next piece of
rod onto the rod going into the well.
58SRHOLDER 5/8" Fiberglass Rod Holder $ 35.00
34SRHOLDER 3/4" Fiberglass Rod Holder $ 35.00


Rod Guide Installation Tool
The Rod Guide Installation Tool makes installing the rod guides on fiberglass rod
easy. The unit hooks over the rod, the rod guide is placed on the rod below the tool,
and using a pipe for a handle, you press the rod guide into place.

5834RGTOOL Installer for 5/8 and 3/4 rod guides $ 82.00


YOU CAN COMBINE SUCKER ROD WITH OTHER ITEMS IN OUR CATALOG
TO QUALIFY FOR OUR $ 1,000.00 FULL FREIGHT PREPAID ORDER POLICY

You might also like