SDCCH congestion can be detected using counters that monitor congestion rate and time on the SDCCH. If SDCCH congestion is expected in many cells, preventative actions are possible in addition to manually increasing the number of SDCCHs, such as activating features to adapt logical channel configuration, extend registration timers, enable fast assignment, reduce maximum retries, disable handover on SDCCH, activate immediate assignment on TCH, reduce authentications, disable assignment to another cell, and use non-combined BCCH.
SDCCH congestion can be detected using counters that monitor congestion rate and time on the SDCCH. If SDCCH congestion is expected in many cells, preventative actions are possible in addition to manually increasing the number of SDCCHs, such as activating features to adapt logical channel configuration, extend registration timers, enable fast assignment, reduce maximum retries, disable handover on SDCCH, activate immediate assignment on TCH, reduce authentications, disable assignment to another cell, and use non-combined BCCH.
SDCCH congestion can be detected using counters that monitor congestion rate and time on the SDCCH. If SDCCH congestion is expected in many cells, preventative actions are possible in addition to manually increasing the number of SDCCHs, such as activating features to adapt logical channel configuration, extend registration timers, enable fast assignment, reduce maximum retries, disable handover on SDCCH, activate immediate assignment on TCH, reduce authentications, disable assignment to another cell, and use non-combined BCCH.
SDCCH congestion can be detected by STS counters for SDCCH congestion rate and congestion time (Object type: CSDCCH! CSDCCHO " Counters: CCO#$S! CTCO#$S! CCO#$SS%&! CTCO#S%&'. 2.16.2 Actions at SDCCH Congestion (anua) actions are norma))y not re*uired. +f SDCCH congestion is e,pected in many ce))s t-e fo))o.ing pre/enti/e actions are possib)e in addition to manua))y increasing t-e number of SDCCHs. a. 0cti/ate t-e feature 0dapti/e Configuration of ogica) C-anne)s (see Section 1.2'. b. 2,tend t-e T3212 periodic registration timer (see Section 3.1.4'. c. 2nab)e parameter FASTASSIGN (see Section 3.1.12'. d. 5educe parameter MAXRET (see Section 3.1.6'. e. Disab)e -ando/er on SDCCH (Command: 5OC! 7arameter: SCHO '. f. 0cti/ate t-e feature +mmediate 0ssignment on TCH (see Section 1.11'. g. 5educe t-e number of 0ut-entications (see Section 3.1.3'. h. Disab)e t-e feature 0ssignment to 0not-er Ce)) (see Section 1.3'. i. %se non8combined &CCH (see Section 3.1.11'.