This slope stability analysis report from PEYSANJ geotechnical engineering software contains the results of a linear interpolation analysis of a test slope project for an unnamed client. The report lists the soil parameters used in the analysis, including a friction angle of 33 degrees, a dilation angle of 5 degrees, a unit weight of 1.95 gr/cm3, a cohesion of 0.07 kg/cm2, and a modulus of subgrade reaction of 3.6 m. It also notes that the slope angle analyzed was 77.6 degrees.
This slope stability analysis report from PEYSANJ geotechnical engineering software contains the results of a linear interpolation analysis of a test slope project for an unnamed client. The report lists the soil parameters used in the analysis, including a friction angle of 33 degrees, a dilation angle of 5 degrees, a unit weight of 1.95 gr/cm3, a cohesion of 0.07 kg/cm2, and a modulus of subgrade reaction of 3.6 m. It also notes that the slope angle analyzed was 77.6 degrees.
This slope stability analysis report from PEYSANJ geotechnical engineering software contains the results of a linear interpolation analysis of a test slope project for an unnamed client. The report lists the soil parameters used in the analysis, including a friction angle of 33 degrees, a dilation angle of 5 degrees, a unit weight of 1.95 gr/cm3, a cohesion of 0.07 kg/cm2, and a modulus of subgrade reaction of 3.6 m. It also notes that the slope angle analyzed was 77.6 degrees.