You are on page 1of 4

NOTE: If you have a previous version of SFT2841 installed on your PC, it must be

removed using Windows Control Panel.




SFT2841 is a large file and is broken down into nine smaller files to facilitate successful
downloads.

A- DOWNLOAD PROCEDURE

1- Download each of the nine files (named below) to a folder on your PC
setup_sft2841_v10.4.part01.exe
setup_sft2841_v10.4.part02.rar
setup_sft2841_v10.4.part03.rar
setup_sft2841_v10.4.part04.rar
setup_sft2841_v10.4.part05.rar
setup_sft2841_v10.4.part06.rar
setup_sft2841_v10.4.part07.rar
setup_sft2841_v10.4.part08.rar
setup_sft2841_v10.4.part09.rar

2- Once the files are downloaded, go to the folder on your PC where the files
were saved. Double-click on the setup_sft2841_v10.4.part01.exe file. This
will open the software license window shown below. If you accept the terms,
click on Accept.



The Install window will open and allows you to select a destination folder on your PC
for SFT2841. Once you have selected your destination folder, click Install.




The Install process will create a folder called SEPAM_SFT2841_V10.4 under your
selected destination folder.



Go to the SEPAM_SFT2841_V10.4 folder and double-click on the filename
. This will de-compress all of the SFT2841 files in the setup
SFT2841 V10.4 folder.



Go to the setup SFT2841 V10.4 folder (see the files contained in this folder below).
Double-click on the file. This will install the software on your PC.




NOTE: You can save the folder setup SFT2841 V10.4 and its sub-folders to a CD for
ease of installation on other PCs.


B- SFT2841_V10.4 Commissioning Software
Installation procedure:
Remove any previous installed versions of SFT2841
Double click on the Setup.exe file in the setup SFT2841 V10.4 folder
Follow the instructions on the screen to install the software
To install a complete version of SFT2841, you must input a valid serial number
(the original serial number of SFT2841 v9.0) for the software in place of the word
Demonstration during the install procedure (see window below)
The installation procedure will place the SFT2841 icon on your PCs desktop


If a valid serial number is not entered, SFT2841 will operate in the Demonstration
mode. The SFT2841 Demonstration software offers all the functions of the complete
version, with the exception of the functions available in connected mode and the file
saving function.

Double click on the SFT2841 icon to start the program.

You might also like