You are on page 1of 1

Protective hood for plastic-insulated cables LPH

Use Termination outdoors for 1 kV plastic-insulated underground cables with 35 cores, 2.5-95 mm. Standards Meets the requirements of: SEN 24 14 34 Design The cable termination consists of a hood made of weather-proof and oil-resistant rubber. The cable cores are bent downwards and fixed with tape before the hood is pushed on. Cable cores can be protected against UVradiation by using IS insulating hose.

Designation 3-core LPH 2532 LPH 4052 LPH 6070 LPH 70 16 50 95

Conductor cross section 4-core mm 10 35 70 95 10 16 5-core

Internal diameter mm 30 49 67 68

Internal height mm 83 137 176 175

Weight kg/item 0.1 0.1 0.3 0.3

To be ordered separately

IS
Insulating hose for plastic cables, overhead cables or for connection to aerial bundled cables. Meets the requirements of SEN 24 21 11 and is UV- and cold-resistant.

Designation IS 16 IS 50 IS 95

Conductor cross section mm 2.516 2550 7095

Thickness mm 0.7 1.0 1.2

Length m/roll 25 25 25

Weight kg/roll 0.7 1.5 2.3

Cable accessories < 1 kV | Kabeldon cable accessories 1420 kV |

2/8

You might also like