Professional Documents
Culture Documents
Abstract: This paper describes a remote monitoring system that can be set up in an operating center to monitor the state of monitoring networks, used as a backup power supply for telecommunications. This system has a battery voltage monitoring function, Fuse blown at the network,we monitor the battery from thefting at the network place and a message will be intimated by an SMS. In addition, the system can be equipped with an internal resistance measurement function and an electrolyte leakage detection function to further insure power-supply reliability. Various states of batteries observed with the system are transmitted to the remote operating center by a remote monitoring function. This function enables obtaining immediate information about the condition of networks and helps to avoid unexpected failures.
VOLTAGE SENSOR
RELAY
MICRO CONTROLLER
RS-232
GSM MODEM
RELAY
IR TX & RX (Anti-theft)
RELAY
BLOCK DIAGRAM EXPLANATION: In this project we are using an IC LM3914 to sense the voltage level which consist of comparators,digital circuit (CD 4011)is used to detect the distled water level with the help of nand gates and the security for the battery is implemented with help of IR Tx and IR Rx for anti-theft protection.Here all the three parameters are continiously monitored and fed to the relay.The relay energises and sends the signal to the input port of 805,now the GSM modem sends the message to the via RS-232 .The signals which are transmitted are received in the mobile in the form of SMS .
APPLICATIONS: 1.It can be employed in all telecommunications 2.It can be used for defence and in domestic applications. 3.It can be employed in industries to monitor different parameters of the industry.