You are on page 1of 3

SUBJECT

Reference: ADQ01 Page No: 1 of 1

Racking Back Kelly

Purpose: The purpose of this procedure is to establish racking back kelly method. Procedure: 1. Ensure Safety Gear is worn: Hard Hat. Safety Glasses. Safety Boots. Gloves. Safety Harness.

2. Driller to back out kelly and pick up to monkey board watching Derrickmans signals. 3. Derrickman to attach hydraulic arm to kelly (Quill). 4. Derrickman to put safety pin in Hyd/arm in a safe manner (with safety harness). 5. Derrickman to attach safety hang off sling. 6. With phone or hand signals driller to lower kelly and derrickman release hook as weight comes off. 7. Derrickman to swing kelly arm to slide off derrick and make secure. 8. Signal Driller back down below monkey board.

ORIGINATOR 453 Toolpusher

ORIGINAL DATE

EFFECTIVE DATE

REVISION No.

You might also like