Professional Documents
Culture Documents
Chemical Composition %
Grade C Si 0.30
Tensile Test
Cr Mo V 0.02 0.10 0.01 50 (345) min 70 (485) min
GL=8(200) 18 GL=2(50) 21
Mn 0.80
Cu 0.25
Ni
Nb
0.65 0.15
1.25 0.75
0.40 0.20
0.50 0.15
1.35 0.80
0.40 0.20
0.25 0.30
0.40 0.25
1.35 0.50
0.50 0.30
0.50
1.20
0.50
Remarks1.For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.06% above the specified maximum for manganese is permitted, up to a maximum of 1.50% 2.Gr.K for plates under 1/2 in.(12.70mm) in thickness, the minimum columbium is waived. 3.For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points. 4.When the thickness less than 5/16 in(8mm), See Specification A6/A6M for elongation adjustment.