You are on page 1of 91

Colour Television

Chassis

TPM9.1E
LA

Contents
1. 2. 3. 4. 5. 6. 7. 8. 9.

Page

Revision List 2 Technical Specs, Diversity, and Connections 2 Precautions, Notes, and Abbreviation List 6 Mechanical Instructions 10 Service Modes, Error Codes, and Fault Finding 15 Alignments 24 Circuit Descriptions 26 IC Data Sheets 33 Block Diagrams Wiring diagram 32" DVB T/C 3000 43 Wiring diagram 37" DVB T/C/S2 3000 44 Wiring diagram 42" DVB T/C/S2 3000 45 Wiring diagram 47" DVB T/C 3000 46 Block Diagram DVB T/C 47 10. Circuit Diagrams and PWB Layouts Drawing B 715G5155 DVB-T/C SSB 3000/3500 series 48 B 715G5163 DVB-S2 /T/C SSB 3000/3500 series66 J 715G5230 IR/LED 3000 series 84 E 715G5199 Keyboard 3000 series 86 11. Styling Sheets 3000 32" 88 3000 37" 89 3000 42" 90 3000 47" 91

PWB 64-65 82-83 85 87

Published by XjL/MjX/SC 1264 BG TV Quality

Printed in the Netherlands

Subject to modification

EN 3122 785 19231 2012-Apr-27

2012 TP Vision Netherlands B.V.


All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

EN 2

1.

TPM9.1E LA

Revision List

1. Revision List
Manual xxxx xxx xxxx.0 First release. Manual xxxx xxx xxxx.1 Chapter 2: Table 2.1 Technical Specifications updated (added CTNs).

2. Technical Specs, Diversity, and Connections


Index of this chapter: 2.1 Technical Specifications 2.2 Directions for Use 2.3 Connections 2.4 Chassis Overview Notes: Figures can deviate due to the different set executions. Specifications are indicative (subject to change). Table 2-1 Described Model Numbers and Diversity
2 4 Mechanics 9 Block Diagrams 10 Schematics E (Keyboard/Leading Edge) 11

2.1

Technical Specifications
For on-line product support please use the links in Table 2-1. Here is product information available, as well as getting started, user manuals, frequently asked questions and software & drivers.

Connection Overview

Rear Cover Removal

Wiring Diagram

Block Diagram

Wire Dressing

SSB Removal

J (IR/LED)

CTN 32PFL3007H/12 32PFL3007H/60 32PFL3007K/02 32PFL3007T/12 32PFL3017H/12 32PFL3017H/60 32PFL3017K/02 32PFL3017T/12 37PFL3007H/12 37PFL3007K/12 37PFL3007T/12 42PFL3007H/12 42PFL3007H/60 42PFL3007K/12 42PFL3007T/12 47PFL3007H/12 47PFL3007K/12 47PFL3007T/12 2-1 2-1 2-2 2-1 2-1 2-1 2-2 2-1 2-1 2-2 2-1 2-1 2-1 2-2 2-1 2-1 2-2 2-1

4-1 4-1 4-2 4-2 4-1 4-1 4-1 4-1 4-2 4-2 4-2 4-3 4-3 4-3 4-3 4-4 4-4 4-4

4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5

4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6

9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.2 9.2 9.2 9.3 9.3 9.3 9.3 9.4 9.4 9.4

9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5

10.1 10.1 10.2 10.1 10.1 10.1 10.2 10.1 10.1 10.2 10.1 10.1 10.1 10.2 10.1 10.1 10.2 10.1

10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3

10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4

11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.2 11.2 11.2 11.3 11.3 11.3 11.3 11.4 11.4 11.4

2.2

Directions for Use


Directions for use can be downloaded from the following websites: http://www.philips.com/support http://www.p4c.philips.com

2012-Apr-27

back to div. table

Styling

SSB

Technical Specs, Diversity, and Connections 2.3 Connections

TPM9.1E LA

2.

EN 3

Rear Connectors
8 7 6

Side Connectors
CI

1
SERV .U SCART (RGB/CVBS) TV ANTENNA VGA

9 10
CVBS/Y Pb

AUDIO IN DVI/VGA Pr

USB2

2
USB1

11
NETWORK L R DIGITAL AUDIO OUT HDMI 2 HDMI1 ARC HDMI

3 4 5

12

13

14

15

19240_001_120217.eps 120217

Figure 2-1 Connection overview (xxPFL30x7H/T)

Rear Connectors
10 9
VGA SCART NETWORK
(RGB/CVBS)

Side Connectors
7 16
CI

SAT

11
AUDIO IN
DVI/VGA

8
SERV .U TV ANTENNA L CVBS/Y

2
USB 2

3
USB 1

12

R Pb HDMI 1 ARC

4
HDMI

Pr DIGITAL AUDIO OUT

HDMI 2

5 13 14 15
19240_002_120218.eps 120218

Figure 2-2 Connection overview (xxPFL30x7K)


back to div. table

2012-Apr-27

EN 4

2.

TPM9.1E LA

Technical Specs, Diversity, and Connections


3 4 5 6 7 8 - Audio L - Ground Audio - Ground Blue - Audio L - Video Blue/C-out - Function Select 0.5 VRMS / 1 k Gnd Gnd 0.5 VRMS / 10 k 0.7 VPP / 75 0 - 2 V: INT 4.5 - 7 V: EXT 16:9 9.5 - 12 V: EXT 4:3 Gnd 0.7 VPP / 75 Gnd Gnd 0.7 VPP / 75 0 - 0.4 V: INT 1 - 3 V: EXT / 75 Gnd Gnd 1 VPP / 75 1 VPP / 75 Gnd k H H j jk j H j H H j j H H k j H

Note: The following connector colour abbreviations are used (acc. to DIN/IEC 757): Bk= Black, Bu= Blue, Gn= Green, Gy= Grey, Rd= Red, Wh= White, Ye= Yellow. 2.3.1 Side Connections 1 - Common Interface 68p - See figure 10-1-14 2 - USB2 2.0

jk

10000_022_090121.eps 090121

Figure 2-3 USB (type A) 1 2 3 4 - +5V - Data (-) - Data (+) - Ground k jk jk H

9 10 11 12 13 14 15 16 17 18 19 20 21

- Ground Green - n.c. - Video Green - n.c. - Ground Red - Ground P50 - Video Red/C - Status/FBL - Ground Video - Ground FBL - Video CVBS - Video CVBS/Y - Shield

Gnd

3 - USB1 2.0 See 2 - USB2 2.0 4 - Head phone (Output) Bk - Head phone 80 - 600 / 10 mW 5 - HDMI: Digital Video - In, Digital Audio - In/Out
19 18 1 2

8 - Service / UART 1 - Ground 2 - UART_TX 3 - UART_RX ot 9 - PC IN:VGA


1 6 11

Gnd Transmit Receive

H k j

5 10 15

10000_017_090121.eps 090428

10000_002_090121.eps 090127

Figure 2-4 HDMI (type A) connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2.3.2 - D2+ - Shield - D2- D1+ - Shield - D1- D0+ - Shield - D0- CLK+ - Shield - CLK- Easylink/CEC - n.c. - DDC_SCL - DDC_SDA - Ground - +5V - HPD - Ground Data channel Gnd Data channel Data channel Gnd Data channel Data channel Gnd Data channel Data channel Gnd Data channel Control channel DDC clock DDC data Gnd Hot Plug Detect Gnd j H j j H j j H j j H j jk j jk H j j H 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Figure 2-6 VGA connector - Video Red - Video Green - Video Blue - n.c. - Ground - Ground Red - Ground Green - Ground Blue - +5VDC - Ground Sync - Ground Red - DDC_SDA - H-sync - V-sync - DDC_SCL 0.7 VPP / 75 W 0.7 VPP / 75 W 0.7 VPP / 75 W Gnd Gnd Gnd Gnd +5 V Gnd Gnd DDC data 0-5V 0-5V DDC clock j j j H H H H j H H j j j j

10 - Audio - In: Left / Right, VGA Bu - Audio L/R in 0.5 VRMS / 10 k 11 - RJ45: Ethernet

jq

Rear Connections 6 - TV ANTENNA - In Signal input from an antenna, cable or satellite. 7 - EXT1: Video RGB/YC - In, CVBS - In/Out, Audio - In/Out
20 2

10000_025_090121.eps 120320

Figure 2-7 Ethernet connector 1 2 3 4 5 6 7 8


back to div. table

21

10000_001_090121.eps 090121

Figure 2-5 SCART connector 1 2


2012-Apr-27

- Audio R - Audio R

0.5 VRMS / 1 k 0.5 VRMS / 10 k

k j

- TD+ - TD- RD+ - CT - CT - RD- GND - GND

Transmit signal Transmit signal Receive signal Centre Tap: DC level fixation Centre Tap: DC level fixation Receive signal Gnd Gnd

k k j j H H

Technical Specs, Diversity, and Connections


12 - EXT2: Video YPbPr - In, Audio - In Gn - Video - Y 1 VPP / 75 W Bu - Video - Pb 0.7 VPP / 75 W Rd - Video - Pr 0.7 VPP / 75 W Wh - Audio - L Rd - Audio - R 0.5 VRMS / 10 k 0.5 VRMS / 10 k jq jq jq jq jq 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

TPM9.1E LA

2.

EN 5
j H j j H j j H j j H j jk k j jk H j j H

13 - Cinch: Digital Audio - Out BK - Coaxial 0.4 - 0.6VPP / 75 14 - HDMI 2: Digital Video - In, Digital Audio - In/Out See 5 - HDMI: Digital Video - In, Digital Audio - In/Out

kq

15 - HDMI 1: Digital Video - In, Digital Audio with ARC In/Out


19 18 1 2

10000_017_090121.eps 090428

- D2+ - Shield - D2- D1+ - Shield - D1- D0+ - Shield - D0- CLK+ - Shield - CLK- Easylink/CEC - ARC - DDC_SCL - DDC_SDA - Ground - +5V - HPD - Ground

Data channel Gnd Data channel Data channel Gnd Data channel Data channel Gnd Data channel Data channel Gnd Data channel Control channel Audio Return Channel DDC clock DDC data Gnd Hot Plug Detect Gnd

Figure 2-8 HDMI (type A) connector

16 - TV ANTENNA - In Signal input from an antenna, cable or satellite.

2.4

Chassis Overview
Refer to 9. Block Diagrams for PWB/CBA locations.

back to div. table

2012-Apr-27

EN 6

3.

TPM9.1E LA

Precautions, Notes, and Abbreviation List

3. Precautions, Notes, and Abbreviation List


Index of this chapter: 3.1 Safety Instructions 3.2 Warnings 3.3 Notes 3.4 Abbreviation List 3.3.2 Schematic Notes All resistor values are in ohms, and the value multiplier is often used to indicate the decimal point location (e.g. 2K2 indicates 2.2 k). Resistor values with no multiplier may be indicated with either an E or an R (e.g. 220E or 220R indicates 220 ). All capacitor values are given in micro-farads ( 10-6), nano-farads (n 10-9), or pico-farads (p 10-12). Capacitor values may also use the value multiplier as the decimal point indication (e.g. 2p2 indicates 2.2 pF). An asterisk (*) indicates component usage varies. Refer to the diversity tables for the correct values. The correct component values are listed on the Philips Spare Parts Web Portal.

3.1

Safety Instructions
Safety regulations require the following during a repair: Connect the set to the Mains/AC Power via an isolation transformer (> 800 VA). Replace safety components, indicated by the symbol h, only by components identical to the original ones. Any other component substitution (other than original type) may increase risk of fire or electrical shock hazard. Safety regulations require that after a repair, the set must be returned in its original condition. Pay in particular attention to the following points: Route the wire trees correctly and fix them with the mounted cable clamps. Check the insulation of the Mains/AC Power lead for external damage. Check the strain relief of the Mains/AC Power cord for proper function. Check the electrical DC resistance between the Mains/AC Power plug and the secondary side (only for sets that have a Mains/AC Power isolated power supply): 1. Unplug the Mains/AC Power cord and connect a wire between the two pins of the Mains/AC Power plug. 2. Set the Mains/AC Power switch to the on position (keep the Mains/AC Power cord unplugged!). 3. Measure the resistance value between the pins of the Mains/AC Power plug and the metal shielding of the tuner or the aerial connection on the set. The reading should be between 4.5 M and 12 M. 4. Switch off the set, and remove the wire between the two pins of the Mains/AC Power plug. Check the cabinet for defects, to prevent touching of any inner parts by the customer.

3.3.3

Spare Parts For the latest spare part overview, consult your Philips Spare Part web portal.

3.3.4

BGA (Ball Grid Array) ICs Introduction For more information on how to handle BGA devices, visit this URL: http://www.atyourservice-magazine.com. Select Magazine, then go to Repair downloads. Here you will find Information on how to deal with BGA-ICs. BGA Temperature Profiles For BGA-ICs, you must use the correct temperature-profile. Where applicable and available, this profile is added to the IC Data Sheet information section in this manual.

3.3.5

Lead-free Soldering Due to lead-free technology some rules have to be respected by the workshop during a repair: Use only lead-free soldering tin. If lead-free solder paste is required, please contact the manufacturer of your soldering equipment. In general, use of solder paste within workshops should be avoided because paste is not easy to store and to handle. Use only adequate solder tools applicable for lead-free soldering tin. The solder tool must be able: To reach a solder-tip temperature of at least 400C. To stabilize the adjusted temperature at the solder-tip. To exchange solder-tips for different applications. Adjust your solder tool so that a temperature of around 360C - 380C is reached and stabilized at the solder joint. Heating time of the solder-joint should not exceed ~ 4 sec. Avoid temperatures above 400C, otherwise wear-out of tips will increase drastically and flux-fluid will be destroyed. To avoid wear-out of tips, switch off unused equipment or reduce heat. Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.

3.2

Warnings
All ICs and many other semiconductors are susceptible to electrostatic discharges (ESD w). Careless handling during repair can reduce life drastically. Make sure that, during repair, you are connected with the same potential as the mass of the set by a wristband with resistance. Keep components and tools also at this same potential. Be careful during measurements in the high voltage section. Never replace modules or other components while the unit is switched on. When you align the set, use plastic rather than metal tools. This will prevent any short circuits and the danger of a circuit becoming unstable.

3.3
3.3.1

Notes
General Measure the voltages and waveforms with regard to the chassis (= tuner) ground (H), or hot ground (I), depending on the tested area of circuitry. The voltages and waveforms shown in the diagrams are indicative. Measure them in the Service Default Mode with a colour bar signal and stereo sound (L: 3 kHz, R: 1 kHz unless stated otherwise) and picture carrier at 475.25 MHz for PAL, or 61.25 MHz for NTSC (channel 3). Where necessary, measure the waveforms and voltages with (D) and without (E) aerial signal. Measure the voltages in the power supply section both in normal operation (G) and in stand-by (F). These values are indicated by means of the appropriate symbols.
back to div. table

3.3.6

Alternative BOM identification It should be noted that on the European Service website, Alternative BOM is referred to as Design variant. The third digit in the serial number (example: AG2B0335000001) indicates the number of the alternative B.O.M. (Bill Of Materials) that has been used for producing the specific TV set. In general, it is possible that the same TV model on the market is produced with e.g. two different types of displays, coming from two different suppliers. This will then

2012-Apr-27

Precautions, Notes, and Abbreviation List


result in sets which have the same CTN (Commercial Type Number; e.g. 28PW9515/12) but which have a different B.O.M. number. By looking at the third digit of the serial number, one can identify which B.O.M. is used for the TV set he is working with. If the third digit of the serial number contains the number 1 (example: AG1B033500001), then the TV set has been manufactured according to B.O.M. number 1. If the third digit is a 2 (example: AG2B0335000001), then the set has been produced according to B.O.M. no. 2. This is important for ordering the correct spare parts! For the third digit, the numbers 1...9 and the characters A...Z can be used, so in total: 9 plus 26= 35 different B.O.M.s can be indicated by the third digit of the serial number. Identification: The bottom line of a type plate gives a 14-digit serial number. Digits 1 and 2 refer to the production centre (e.g. SN is Lysomice, RJ is Kobierzyce), digit 3 refers to the B.O.M. code, digit 4 refers to the Service version change code, digits 5 and 6 refer to the production year, and digits 7 and 8 refer to production week (in example below it is 2010 week 10 / 2010 week 17). The 6 last digits contain the serial number.

TPM9.1E LA

3.

EN 7

AARA

ACI

ADC AFC

AGC

AM AP AR ASF

ATSC

ATV Auto TV

AV AVC AVIP B/G BDS BLR BTSC

10000_053_110228.eps 110228

Figure 3-1 Serial number (example) 3.3.7 Board Level Repair (BLR) or Component Level Repair (CLR) If a board is defective, consult your repair procedure to decide if the board has to be exchanged or if it should be repaired on component level. If your repair procedure says the board should be exchanged completely, do not solder on the defective board. Otherwise, it cannot be returned to the O.E.M. supplier for back charging! 3.3.8 Practical Service Precautions It makes sense to avoid exposure to electrical shock. While some sources are expected to have a possible dangerous impact, others of quite high potential are of limited current and are sometimes held in less regard. Always respect voltages. While some may not be dangerous in themselves, they can cause unexpected reactions that are best avoided. Before reaching into a powered TV set, it is best to test the high voltage insulation. It is easy to do, and is a good service precaution.

B-TXT C CEC

CL CLR ComPair CP CSM CTI

CVBS DAC DBE DCM

DDC D/K DFI DFU DMR DMSD DNM

3.4

Abbreviation List
0/6/12 SCART switch control signal on A/V board. 0 = loop through (AUX to TV),

6 = play 16 : 9 format, 12 = play 4 : 3 format Automatic Aspect Ratio Adaptation: algorithm that adapts aspect ratio to remove horizontal black bars; keeps the original aspect ratio Automatic Channel Installation: algorithm that installs TV channels directly from a cable network by means of a predefined TXT page Analogue to Digital Converter Automatic Frequency Control: control signal used to tune to the correct frequency Automatic Gain Control: algorithm that controls the video input of the feature box Amplitude Modulation Asia Pacific Aspect Ratio: 4 by 3 or 16 by 9 Auto Screen Fit: algorithm that adapts aspect ratio to remove horizontal black bars without discarding video information Advanced Television Systems Committee, the digital TV standard in the USA See Auto TV A hardware and software control system that measures picture content, and adapts image parameters in a dynamic way External Audio Video Audio Video Controller Audio Video Input Processor Monochrome TV system. Sound carrier distance is 5.5 MHz Business Display Solutions (iTV) Board-Level Repair Broadcast Television Standard Committee. Multiplex FM stereo sound system, originating from the USA and used e.g. in LATAM and AP-NTSC countries Blue TeleteXT Centre channel (audio) Consumer Electronics Control bus: remote control bus on HDMI connections Constant Level: audio output to connect with an external amplifier Component Level Repair Computer aided rePair Connected Planet / Copy Protection Customer Service Mode Color Transient Improvement: manipulates steepness of chroma transients Composite Video Blanking and Synchronization Digital to Analogue Converter Dynamic Bass Enhancement: extra low frequency amplification Data Communication Module. Also referred to as System Card or Smartcard (for iTV). See E-DDC Monochrome TV system. Sound carrier distance is 6.5 MHz Dynamic Frame Insertion Directions For Use: owner's manual Digital Media Reader: card reader Digital Multi Standard Decoding Digital Natural Motion

back to div. table

2012-Apr-27

EN 8
DNR DRAM DRM DSP DST

3.

TPM9.1E LA

Precautions, Notes, and Abbreviation List


The SDI signal is self-synchronizing, uses 8 bit or 10 bit data words, and has a maximum data rate of 270 Mbit/s, with a minimum bandwidth of 135 MHz. Institutional TeleVision; TV sets for hotels, hospitals etc. Last Status; The settings last chosen by the customer and read and stored in RAM or in the NVM. They are called at start-up of the set to configure it according to the customer's preferences Latin America Liquid Crystal Display Light Emitting Diode Monochrome TV system. Sound carrier distance is 6.5 MHz. L' is Band I, L is all bands except for Band I LG.Philips LCD (supplier) Loudspeaker Low Voltage Differential Signalling Mega bits per second Monochrome TV system. Sound carrier distance is 4.5 MHz Part of a set of international standards related to the presentation of multimedia information, standardised by the Multimedia and Hypermedia Experts Group. It is commonly used as a language to describe interactive television services Microprocessor without Interlocked Pipeline-Stages; A RISC-based microprocessor Matrix Output Processor Metal Oxide Silicon Field Effect Transistor, switching device Motion Pictures Experts Group Multi Platform InterFace MUTE Line Mainstream TV: TV-mode with Consumer TV features enabled (iTV) Not Connected Near Instantaneous Compounded Audio Multiplexing. This is a digital sound system, mainly used in Europe. Negative Temperature Coefficient, non-linear resistor National Television Standard Committee. Color system mainly used in North America and Japan. Color carrier NTSC M/N= 3.579545 MHz, NTSC 4.43= 4.433619 MHz (this is a VCR norm, it is not transmitted off-air) Non-Volatile Memory: IC containing TV related data such as alignments Open Circuit On Screen Display Over the Air Download. Method of software upgrade via RF transmission. Upgrade software is broadcasted in TS with TV channels. On screen display Teletext and Control; also called Artistic (SAA5800) Project 50: communication protocol between TV and peripherals Phase Alternating Line. Color system mainly used in West Europe (colour carrier = 4.433619 MHz) and South America (colour carrier PAL M = 3.575612 MHz and PAL N = 3.582056 MHz) Printed Circuit Board (same as PWB) Pulse Code Modulation

DTCP

DVB-C DVB-T DVD DVI(-d) E-DDC

EDID EEPROM EMI EPG EPLD EU EXT FDS FDW FLASH FM FPGA FTV Gb/s G-TXT H HD HDD HDCP

HDMI HP I I2 C I2 D I2 S IF IR IRQ ITU-656

Digital Noise Reduction: noise reduction feature of the set Dynamic RAM Digital Rights Management Digital Signal Processing Dealer Service Tool: special remote control designed for service technicians Digital Transmission Content Protection; A protocol for protecting digital audio/video content that is traversing a high speed serial bus, such as IEEE-1394 Digital Video Broadcast - Cable Digital Video Broadcast - Terrestrial Digital Versatile Disc Digital Visual Interface (d= digital only) Enhanced Display Data Channel (VESA standard for communication channel and display). Using E-DDC, the video source can read the EDID information form the display. Extended Display Identification Data (VESA standard) Electrically Erasable and Programmable Read Only Memory Electro Magnetic Interference Electronic Program Guide Erasable Programmable Logic Device Europe EXTernal (source), entering the set by SCART or by cinches (jacks) Full Dual Screen (same as FDW) Full Dual Window (same as FDS) FLASH memory Field Memory or Frequency Modulation Field-Programmable Gate Array Flat TeleVision Giga bits per second Green TeleteXT H_sync to the module High Definition Hard Disk Drive High-bandwidth Digital Content Protection: A key encoded into the HDMI/DVI signal that prevents video data piracy. If a source is HDCP coded and connected via HDMI/DVI without the proper HDCP decoding, the picture is put into a snow vision mode or changed to a low resolution. For normal content distribution the source and the display device must be enabled for HDCP software key decoding. High Definition Multimedia Interface HeadPhone Monochrome TV system. Sound carrier distance is 6.0 MHz Inter IC bus Inter IC Data bus Inter IC Sound bus Intermediate Frequency Infra Red Interrupt Request The ITU Radio communication Sector (ITU-R) is a standards body subcommittee of the International Telecommunication Union relating to radio communication. ITU-656 (a.k.a. SDI), is a digitized video format used for broadcast grade video. Uncompressed digital component or digital composite signals can be used.
back to div. table

iTV LS

LATAM LCD LED L/L'

LPL LS LVDS Mbps M/N MHEG

MIPS

MOP MOSFET MPEG MPIF MUTE MTV NC NICAM

NTC NTSC

NVM O/C OSD OAD

OTC P50 PAL

PCB PCM

2012-Apr-27

Precautions, Notes, and Abbreviation List


PDP PFC PIP PLL Plasma Display Panel Power Factor Corrector (or Pre-conditioner) Picture In Picture Phase Locked Loop. Used for e.g. FST tuning systems. The customer can give directly the desired frequency Point Of Deployment: a removable CAM module, implementing the CA system for a host (e.g. a TV-set) Power On Reset, signal to reset the uP Power Supply for Direct view LED backlight with 2D-dimming Power Supply with integrated LED drivers Power Supply with integrated LED drivers with added Scanning functionality Positive Temperature Coefficient, non-linear resistor Printed Wiring Board (same as PCB) Pulse Width Modulation Quasi Resonant Converter Quality Temporal Noise Reduction Quality Video Composition Processor Random Access Memory Red, Green, and Blue. The primary color signals for TV. By mixing levels of R, G, and B, all colors (Y/C) are reproduced. Remote Control Signal protocol from the remote control receiver RESET signal Read Only Memory Reduced Swing Differential Signalling data interface Red TeleteXT Service Alignment Mode Short Circuit Syndicat des Constructeurs d'Appareils Radiorcepteurs et Tlviseurs Serial Clock I2C CLock Signal on Fast I2C bus Standard Definition Serial Data I2C DAta Signal on Fast I2C bus Serial Digital Interface, see ITU-656 Synchronous DRAM SEequence Couleur Avec Mmoire. Colour system mainly used in France and East Europe. Colour carriers = 4.406250 MHz and 4.250000 MHz Sound Intermediate Frequency Switched Mode Power Supply System on Chip Sync On Green Self Oscillating Power Supply Serial Peripheral Interface bus; a 4-wire synchronous serial data link standard Sony Philips Digital InterFace Static RAM Service Reference Protocol Small Signal Board Spread Spectrum Clocking, used to reduce the effects of EMI Set Top Box STand-BY 800 600 (4:3) Super Video Home System Software SWAN SXGA TFT THD TMDS TS TXT TXT-DW UI uP UXGA V VESA VGA VL VSB WYSIWYR

TPM9.1E LA

3.

EN 9

POD

POR PSDL PSL PSLS

PTC PWB PWM QRC QTNR QVCP RAM RGB

WXGA XTAL XGA Y Y/C YPbPr

RC RC5 / RC6 RESET ROM RSDS R-TXT SAM S/C SCART

YUV

Spatial temporal Weighted Averaging Noise reduction 1280 1024 Thin Film Transistor Total Harmonic Distortion Transmission Minimized Differential Signalling Transport Stream TeleteXT Dual Window with TeleteXT User Interface Microprocessor 1600 1200 (4:3) V-sync to the module Video Electronics Standards Association 640 480 (4:3) Variable Level out: processed audio output toward external amplifier Vestigial Side Band; modulation method What You See Is What You Record: record selection that follows main picture and sound 1280 768 (15:9) Quartz crystal 1024 768 (4:3) Luminance signal Luminance (Y) and Chrominance (C) signal Component video. Luminance and scaled color difference signals (B-Y and R-Y) Component video

SCL SCL-F SD SDA SDA-F SDI SDRAM SECAM

SIF SMPS SoC SOG SOPS SPI

S/PDIF SRAM SRP SSB SSC STB STBY SVGA SVHS SW

back to div. table

2012-Apr-27

EN 10

4.

TPM9.1E LA

Mechanical Instructions

4. Mechanical Instructions
Index of this chapter: 4.1 Cable Dressing 4.2 Service Positions 4.3 Assembly/Panel Removal 4.4 Set Re-assembly Notes: Figures below can deviate slightly from the actual situation, due to the different set executions.

4.1

Cable Dressing

19230_100_120301.eps 120309

Figure 4-1 Cable dressing (32" DVB T/C)

2012-Apr-27

back to div. table

Mechanical Instructions

TPM9.1E LA

4.

EN 11

19230_101_120301.eps 120309

Figure 4-2 Cable dressing (37" DVB T/C/S2)

19230_102_120301.eps 120309

Figure 4-3 Cable dressing (42" DVB T/C/S2)

back to div. table

2012-Apr-27

EN 12

4.

TPM9.1E LA

Mechanical Instructions

19230_103_120301.eps 120312

Figure 4-4 Cable dressing (47" DVB T/C)

4.2

Service Positions
For easy servicing of a TV set, the set should be put face down on a soft flat surface, foam buffers or other specific workshop tools. Ensure that a stable situation is created to perform measurements and alignments. When using foam bars take care that these always support the cabinet and never only the display. Caution: Failure to follow these guidelines can seriously damage the display! Ensure that ESD safe measures are taken.

4.3

Assembly/Panel Removal
Instructions below apply to the 32PFL3507H/12, but will be similar for other models.

4.3.1

Rear Cover Refer to Figure 4-5 for details. Warning: Disconnect the mains power cord before removing the rear cover. 1. Remove fixation screws [1], [2] and, [3] that secure the rear cover. Refer to Figure 4-5 for details. 2. At the top side the rear cover is locked by catches, so gently lift the bottom side and push the cover upwards to release these catches. Then lift the cover from the TV. Make sure that cabling and wires are not damaged while lifting the rear cover from the set.

2012-Apr-27

back to div. table

Mechanical Instructions

TPM9.1E LA

4.

EN 13

3 16 1 3 7.5 1 1 2 M3 8 3 M4 10 4 2 3 1 1 4 4 4 4 1 2 1

19230_104_120301.eps 120316

Figure 4-5 Rear cover removal 4.3.2 Stand

3
Refer to Figure 4-5 for details. 1. Remove fixation screws [4] that secure the base assembly, pull the base assembly downwards away from the catches. Do not release the two screws in the middle of the stand. 4.3.3 Power Supply Unit (PSU) Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU. 1. Unplug all connectors from the PSU. 2. Remove the fixation screw located right side of the mains inlet connector. 3. Remove the other four fixation screws located at the corners of the panel. 4. The PSU can be taken out of the set now. 4.3.4 Small Signal Board (SSB) Refer to Figure 4-6 for details. Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB. 1. Release the clips from the LVDS cable connector that connects the panel to the SSB [1]. Caution: be careful, as these are very fragile connectors! 2. Release the clamps and unplug all other connectors [2]. 3. Remove all the fixation screws from the SSB [3]. 4. Take out the SSB with I/O bracket. 5. The SSB can now be shifted away from side connector cover and lifted from the set. Refer to Figure 4-6 for details.

3
1

3
19230_105_120301.eps 120312

Figure 4-6 SSB removal 4.3.5 Speakers 1. Gently release the tapes that holds the speaker cables. 2. Unplug the speaker connector from the SSB. 3. Take the speakers out. When defective, replace both units.

back to div. table

2012-Apr-27

EN 14
4.3.6

4.

TPM9.1E LA

Mechanical Instructions

Keyboard Control unit 1. Gently release the tape that holds the boards cable. 2. Gently push inwards the three clips at the PSU side of the unit. Release the unit at the PSU side and turn it away from the PSU. Now push it towards the PSU to release the catches at the other side of the unit. Take it out from the metal bracket. 3. Unplug the connector from the keyboard control unit. When defective, replace the whole unit.

4.3.7

IR/LED Board 1. Remove the stand as described earlier. 2. Gently release the clip of the panels cover on the left side, and take out the cover from the bezel. 3. Gently release the clip at the right side of the panel, and take the panel from the bezel. 4. Unplug the connector from the IR/LED board. When defective, replace the whole unit.

4.3.8

LCD Panel 1. 2. 3. 4. 5. 6. 7. Remove the SSB as described earlier. Remove the PSU as described earlier. Remove the speakers as described earlier. Remove the keyboard control unit as described earlier. Remove the stand as described earlier. Remove the IR/LED board as described earlier. Remove all other metal parts that do not belong to the LCD panel. 8. Release all fixing clips that secure the front bezel to the LCD panel. 9. Lift the LCD Panel from the front bezel. When defective, replace the whole unit.

4.4

Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order. Notes: While re-assembling, make sure that all cables are placed and connected in their original position. See Figure 4-1. Pay special attention not to damage the EMC foams on the SSB shields. Ensure that EMC foams are mounted correctly.

2012-Apr-27

back to div. table

Service Modes, Error Codes, and Fault Finding

TPM9.1E LA

5.

EN 15

5. Service Modes, Error Codes, and Fault Finding


Index of this chapter: 5.1 Test Points 5.2 Service Modes 5.3 Stepwise Start-up 5.4 Service Tools 5.5 Software Upgrading 5.6 Error Codes 5.7 The Blinking LED Procedure 5.8 Fault Finding and Repair Tips Life Timer During the life time cycle of the TV set, a timer is kept (called Op. Hour). It counts the normal operation hours (not the Stand-by hours). The actual value of the timer is displayed in SDM and SAM in a decimal value. Every two soft-resets increase the hour by + 1. Stand-by hours are not counted. Software Identification, Version, and Cluster The software ID, version, and cluster will be shown in the main menu display of SDM, SAM, and CSM. The screen will show: AAAAB-X.YYY, where: AAAA is the chassis name: T913E x.yyy. B is the region indication: E = Europe, A = AP/China, U = NAFTA, L = LATAM. X is the main version number: this is updated with a major change of specification (incompatible with the previous software version). Numbering will go from 1 - 99 and AA - ZZ. - If the main version number changes, the new version number is written in the NVM. - If the main version number changes, the default settings are loaded. YYY is the sub version number: this is updated with a minor change (backwards compatible with the previous versions). Numbering will go from 000 - 999. - If the sub version number changes, the new version number is written in the NVM. - If the NVM is refreshed, the software identification, version, and cluster will also be written to NVM. Display Option Code Selection When after an SSB or display exchange, the display option code is not set properly, it will result in a TV with no display. Therefore, it is required to set this display option code after such a repair. To do so, press the following key sequence on a standard RC transmitter: 062598 directly followed by MENU and xxx, where xxx is a 3 digit decimal value of the panel type: see column Display Code in Table 6-3. When the value is accepted and stored in NVM, the set will switch to Stand-by, to indicate that the process has been completed. During this algorithm, the NVM-content must be filtered, because several items in the NVM are TV-related and not SSB related (e.g. Model and Prod. S/N). Therefore, Model and Prod. S/N data is changed into See Type Plate. In case a call centre or consumer reads See Type Plate in CSM mode. 5.2.2 Service Default Mode (SDM) Purpose Set the TV in SDM mode in order to be able to create a predefined setting for measurements to be made. In this platform, a simplified SDM is introduced (without protection override and without tuning to a predefined frequency). Specifications Set linear video and audio settings to 50%, but volume to 25%. Stored user settings are not affected. All service-unfriendly modes (if present) are disabled, since they interfere with diagnosing/repairing a set. These service unfriendly modes are: (Sleep) timer. Blue mute/Wall paper. Auto switch off (when there is no ident signal). Hotel or hospital mode. Child lock or parental lock (manual or via V-chip). Skipping, blanking of Not favourite, Skipped or Locked presets/channels. Automatic storing of Personal Preset or Last Status settings.

5.1

Test Points
As most signals are digital, it will be difficult to measure waveforms with a standard oscilloscope. However, several key ICs are capable of generating test patterns, which can be controlled via ComPair. In this way it is possible to determine which part is defective. Perform measurements under the following conditions: Service Default Mode. Video: Colour bar signal. Audio: 3 kHz left, 1 kHz right.

5.2

Service Modes
The Service Mode feature is split into five parts: Service Default Mode (SDM). Service Alignment Mode (SAM). Factory Mode. Customer Service Mode (CSM). Computer Aided Repair Mode (ComPair). SDM, SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. Some features are: A pre-defined situation to ensure measurements can be made under uniform conditions (SDM). Activates the blinking LED procedure for error identification when no picture is available (SDM). Make alignments (e.g. White Tone), reset the error buffer (SAM and Factory Mode). Display information (SDM or SAM indication in upper right corner of screen, error buffer, software version, operating hours, options and option codes, sub menus). The CSM is a Service Mode that can be enabled by the consumer. The CSM displays diagnosis information, which the customer can forward to the dealer or call centre. In CSM mode, CSM, is displayed in the top right corner of the screen. The information provided in CSM and the purpose of CSM is to: Increase the home repair hit rate. Decrease the number of nuisance calls. Solved customers problem without home visit. ComPair Mode is used for communication between a computer and a TV on I2C /UART level and can be used by a Service engineer to quickly diagnose the TV set by reading out error codes, read and write in NVMs, communicate with ICs and the mP (PWM, registers, etc.), and by making use of a fault finding database. It will also be possible to up and download the software of the TV set via I2C with help of ComPair. To do this, ComPair has to be connected to the TV set via the ComPair connector, which will be accessible through the rear of the set (without removing the rear cover). Note: For the new model range, a new remote control (RC) is used with some renamed buttons. This has an impact on the activation of the Service modes. For instance the old MENU button is now called HOME (or is indicated by a house icon).

5.2.1

General Next items are applicable to all Service Modes or are general.
back to div. table

2012-Apr-27

EN 16

5.

TPM9.1E LA

Service Modes, Error Codes, and Fault Finding


controls will not have I+ button, but an INFO button instead. How to Exit SDM Switch the set to Stand-by by pressing the standby button on the remote control transmitter or on the television set. Via a standard customer RC-transmitter: key in 00-sequence. Note: If the TV is switched off by a power interrupt while in SDM, the TV will show up in the last status of SDM menu as soon as the power is supplied again. The error buffer will not be cleared. 5.2.3 Service Alignment Mode (SAM) Purpose To modify the NVM. To display/clear the error code buffer. To perform alignments. Specifications Operation hours counter (maximum five digits displayed). Software version, error codes, and option settings display. Error buffer clearing. Option settings. Software alignments (White Tone). NVM Editor. Set screen mode to full screen (all content is visible). How to Activate SAM To activate SAM, use one of the following methods: Press the following key sequence on the remote control transmitter: 062596, directly followed by the INFO button. Do not allow the display to time out between entries while keying the sequence. Or via ComPair. After entering SAM, the following items are displayed, with SAM in the upper right corner of the screen to indicate that the television is in Service Alignment Mode.

Automatic user menu time-out (menu switches back/OFF automatically. Auto Volume levelling (AVL).

How to Activate SDM To activate SDM, use the following methods: Press the following key sequence on the RC transmitter: 062596, directly followed by the Home button. After activating this mode, SDM will appear in the upper left corner of the screen. On Screen Menu After activating SDM, the following items are displayed, with SDM in the upper right corner of the screen to indicate that the television is in Service Default Mode. Menu items and explanation: xxxxx Operating hours (in decimal). AAAAB-X.YYY See Software Identification, Version, and Cluster for the software name definition. ERR Shows all errors detected since the last time the buffer was erased in format <xxx> <xxx> <xxx> <xxx> <xxx> (five errors possible). OP Used to read-out the option bytes. In this chassis two times eight option codes are used. How to Navigate As this mode is read only, there is nothing to navigate. To switch to other modes, use one of the following methods: Command MENU from the user remote will exit SDM. To prevent the OSD from interfering with measurements in SDM, use the command Adjust or Options (STATUS or INFO for NAFTA and LATAM) from the user remote. This will switch the OSD off while remaining in the SDM mode. The SDM OSD is remains visible in the upper right coner of the screen. To exit SDM switch to Stand-by mode. Press the following key sequence on the remote control transmitter: 062596 directly followed by the OK button to switch to SAM (do not allow the display to time out between entries while keying the sequence). Remarks: new remote Table 5-1 SAM mode overview
Main Menu System Information Sub-menu 1 Op Hour Main SW ID ERR OP1 OP2 Clear RGB Align Press [OK] to clean the Error Codes immediately Warm R Gain G Gain B Gain Normal R Gain G Gain B Gain Cool R Gain G Gain B Gain Store NVM editor Address Value Store Upload to USB Copy Channel List to USB Copy NVM to USB Copy Readable Info to USB Copy EDID to USB e.g. TPM913E 1.055A e.g. 000 000 000 000 000 e.g. 012 007 208 002 184 032 007 030 e.g. 056 023 000 106 064 000 000 122 Sub-menu 2

Description This represents the life timer. The timer counts normal operation hours, but does not count Stand-by hours. See paragraph Software Identification, Version, and Cluster for the software name definition. Shows all errors detected since the last time the buffer was erased. Five errors possible. Used to read-out the option bytes. See paragraph 6.4 Option Settings in the Alignments section for a detailed description. Ten codes are possible.

Erases the contents of the error buffer. Select this menu item and press the MENU RIGHT key on the remote control. The content of the error buffer is cleared. To align the White Tone. See paragraph 6.3 Software Alignments in the Alignments section for a detailed description

Store the RGB value Select and fill the NVM address Select and fill the NVM value Store the value in the address To upload several settings from the TV to an USB stick

2012-Apr-27

back to div. table

Service Modes, Error Codes, and Fault Finding


Main Menu Sub-menu 1 Copy NVM from USB Copy Readable Info from USB Copy EDID from USB Initialize NVM EDID Write Enable Service Data Press [OK] to Initialize NVM immediately Press [OK] to enable EDID writable immediately Type Number Production Number 12NC SSB 12NC PSU 12NC Display Clear OAD Version Press [OK] to clean OAD Version immediately Press [OK] use key pad edit type number immediately Press [OK] use key pad edit production number immediately Press [OK] use key pad edit SSB immediately Press [OK] use key pad edit PSU immediately Press [OK] use key pad edit display immediately Sub-menu 2 Description

TPM9.1E LA

5.

EN 17

Download from USB Copy Channel List from USB

To download several settings from the USB stick to the TV

To initialize a (corrupted) NVM. Be careful, this will erase all settings. Enable EDID for writing Edit and display the applicable service data by using the displayed key pad.

Clean OAD (Over Air Download, firmware update method) Version

How to Navigate In the SAM menu, select menu items with the UP/DOWN keys on the remote control transmitter. The selected item will be indicated. When not all menu items fit on the screen, use the UP/DOWN keys to display the next/previous menu items. With the LEFT/RIGHT keys, it is possible to: (De) activate the selected menu item. (De) activate the selected sub menu. Change the value of the selected menu item. When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the background). Press the following key sequence on the remote control transmitter: 062596 directly followed by the Home button to switch to SDM (do not allow the display to time out between entries while keying the sequence). How to Store SAM Settings To store the settings changed in SAM mode (except the RGB Align settings), leave the top level SAM menu by using the POWER button on the remote control transmitter or the television set. The mentioned exceptions must be stored separately via the STORE button. How to Exit SAM Use one of the following methods: Switch the set to STANDBY by pressing the mains button on the remote control transmitter or the television set. Table 5-2 Factory mode overview
Default value Item Itemvakue 0 F/W VERSION 32" Press OK 37" 42" 47" Description

Via a standard RC-transmitter, key in 00 sequence. Note: When the TV is switched off by a power interrupt while in SAM, the TV will show up in normal operation mode as soon as the power is supplied again. The error buffer will not be cleared. 5.2.4 Contents of the Factory mode: Purpose To perform extended alignments. Specifications Displaying and or changing Panel ID information. Displaying and or changing Tuner ID information. Error buffer clearing. Various software alignment settings. Testpattern diplaying. Public Broadcasting Service password Reset. etc. How to Activate the Factory mode To activate the Factory mode, use the following method: Press the following key sequence on the remote control transmitter: from the Home screen press 1999, directly followed by the Back button. Do not allow the display to time out between entries while keying the sequence. After entering the Factory mode, the following items are displayed,

Displays the software versions of the supplier, Flash PQ, Smart Picture, BL Dimming, Source Meter, the Picture Quality checksum, the Dimming library, the Source meter library, the Flash AQ, the MTK, MCU and OAD software versions.

1 2 3 4 5 6 7 8

Panel_ID Tuner ID

See table 6-3 Display code overview Displays and changes the Panel ID with the left and right cursor; be careful changing this, it can result in not correct displaying the screen! 105: LG TDTK-G731D 161: Panasonic ENV57U09D5F Press OK 0 various Press OK Press OK Displays and changes the Tuner ID with the left and right cursor. Not to be changed when the tuner is replaced with the correct service part Values showing the last 5 errors during the last 50 hrs of operation, according to table 5-4 Error code table Selecting this clear all current error codes. NVM address 0 to 8191, Use Item 6 to change and 7 to store the data to the correct NVM address Displays the value at the NVM address of item 5 Use this option to save the data of item 6 to NVM address of item 5 Use this to store the NVM data to the REPAIR folder of a FAT formatted USB memory stick. The TV will write two files in the REPAIR folder of the memory stick. It will create this folder if it does not exist. The items are Channel list, Personal settings, Option codes, Display-related alignments and History list. In case the download to the USB stick was not successful Failure will appear. In this case, check if the USB stick is connected properly. Now the settings are stored onto the USB stick and can be used to download onto another TV or other SSB. Uploading is of course only possible if the software is running and if a picture is available. This method is created to be able to save the customers TV settings and to store them into another SSB.

ERR Code: xxx xxx xxx xxx xxx 000 000 000 000 000 CLEAR ERROR BUFFER NVM ADDRESS NVM VALUE NVM STORE NVM COPY TV to USB

back to div. table

2012-Apr-27

EN 18

5.

TPM9.1E LA
Default value

Service Modes, Error Codes, and Fault Finding

Item Itemvakue 9 NVM COPY USB to TV

32" Press OK

37"

42"

47"

Description Use this to store the NVM data from the USB memory stick to the TV. The TV will save the two files which were created in item 8 to the NVM of the set. Use these options when replacing a SSB. When USB to TV Success is displayed remove the power and restart the TV Use this to reset the Child Lock Reset the Dimming Reset the Source meter Shows the Validity of the CI+ key and the supplier information Used to enter a new CI+ code into the NVM. This can only be used when no CI+ code exists in the NVM Used to enter a new EDID codes into the NVM With the left and right keys of the remote control various test patterns can be chosen Use this to return the set to virgin mode. Depends whether the set has been used already. E-fuse mode ORT mode When switched on the VGA port can be used for UART logging. Use this for ageing a new LCD panel Red colour temperature setting Green colour temperature setting Red colour temperature setting PC: any pattern that has black and white, YPbPr: SMPTE bar (colour bar), any timing. Red ADC gain Green ADC gain Blue ADC gain Red ADC offset Green ADC offset Blue ADC offset Not available for this chassis Three modes, 0: off, 1: adaptive mode, 2: fixed mode Limit threshold Limit threshold Limit threshold Line-in audio gain HDMI audio gain Analogue TV audio gain Digital TV audio gain USB audio gain

10 11 12 13 14 15 16 17 18 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

RESET_PBS_PWD DIM_LIB_RESET SRC_METER RESET CIPLUS_QUERY CIPLUS UPDATE EDID UPDATE Test Pattern VIRGIN_MODE E-Fuse ORT_MODE VGA_UART_SWITCH AGEING MODE CLR_TEMP_R CLR_TEMP_G CLR_TEMP_B AUTO_COLOR ADC_GAIN_R ADC_GAIN_G ADC_GAIN_B ADC_OFFSET_R ADC_OFFSET_G ADC_OFFSET_B YPBPR_PHASE AUD_LIMITER_MODE AUD_THRESHOLD_BYTE1 AUD_THRESHOLD_BYTE2 AUD_THRESHOLD_BYTE3 AUD_GAIN_LINEIN AUD_GAIN_HDMI AUD_GAIN_ATV AUD_GAIN_DTV AUD_GAIN_USB AQ_INDEX Audio Test Mode Audio Channel Type DUMP PQ FROM TV LOAD PQ to TV DUMP AQ FROM TV LOAD AQ to TV EXIT_FACTORY

Press OK Press OK Press OK Press OK Press OK Press OK Press OK Off/On On Off Off Off 128 128 128 Press OK 164 164 164 164 164 164 InValid 2 32 32 5 3 2 3 2 2 0 Off 2.0 Press OK Press OK Press OK Press OK Press OK 1 2 3

Audio Quality index Used for audio testing during production Defines the installed speaker system Saves the picture quality data to a file pq.bin to the root of a FAT formatted USB memory stick Loads the picture quality data from a file pq.bin in to the TV Saves the audio quality data to a file AQ.bin to the root of a FAT formatted USB memory stick Loads the audio quality data from a file AQ.bin in to the TV Exits the Factory mode

How to Exit the Factory mode Use one of the following methods: Select EXIT_FACTORY from the menu and press the OK button. Note: When the TV is switched off by a power interrupt, or normal switch to stand-by while in the factory mode, the TV will show up in normal operation mode as soon as the power is supplied again. The error buffer will not be cleared. 5.2.5 Customer Service Mode (CSM) Purpose The Customer Service Mode shows error codes and information on the TVs operation settings.The call centre can instruct the customer (by telephone) to enter CSM in order to identify the status of the set.This helps the call centre to diagnose problems and failures in the TV set before making a service call. The CSM is a read-only mode; therefore, modifications are not possible in this mode. Specifications Ignore Service unfriendly modes. Line number for every line (to make CSM language independent). Set the screen mode to full screen (all contents on screen is visible).

After leaving the Customer Service Mode, the original settings are restored. Possibility to use CH+ or CH- for channel surfing, or enter the specific channel number on the RC.

How to Activate CSM To activate CSM, press the following key sequence on a standard remote control transmitter: 123654 (do not allow the display to time out between entries while keying the sequence). After entering the Customer Service Mode, the following items are displayed. Note: Activation of the CSM is only possible if there is no (user) menu on the screen! Contents of CSM 1.1 Set Type This information is very helpful for a helpdesk/workshop as reference for further diagnosis. In this way, it is not necessary for the customer to look at the rear of the TV-set. Note that if an NVM is replaced or is initialized after corruption, this set type has to be re-written to NVM. 1.2 Production code Displays the production code (the serial number) of the TV. Note that if an NVM is replaced or is initialized after corruption, this production code has to be re-written to NVM.

2012-Apr-27

back to div. table

Service Modes, Error Codes, and Fault Finding


1.3 Installation date Indicates the date of the first installation of the TV. This date is acquired via time extraction. 1.4 Option Code 1 Gives the option codes of option group 1 as set in SAM. 1.5 Option Code 2 Gives the option codes of option group 2 as set in SAM. 1.6 SSB Gives an identification of the SSB as stored in NVM. Note that if an NVM is replaced or is initialized after corruption, this identification number has to be re-written to NVM. This identification number is the 12NC number of the SSB. 1.7 Display 12NC NVM read/write. 1.8 PSU 12NC NVM read/write. 2.1 Current Main SW Displays the built-in main software version. In case of field problems related to software, software can be upgraded. As this software is consumer upgradeable, it will also be published on the internet. 2.2 Standby SW Displays the built-in stand-by processor software version. Upgrading this software will be possible via USB. 2.3 Panel Code Displays the Display Code number. 2.4 NVM version Detects and displays NVM version. 2.5 Error Codes Detects and displays errors.

TPM9.1E LA

5.

EN 19

3.1 Signal Quality Analog/digital signal strength. 3.2 Child lock Not active / active. This is a combined item for locks. If any lock (channel lock, parental lock) is active, it is indicated as active. 3.3 HDCP keys Indicates the validity of the HDMI keys (or HDCP keys). In case these keys are not valid and the customer wants to make use of the HDMI functionality, the SSB has to be replaced. 3.4 e-UM version Version of the available built in electronic manual.

How to Navigate By means of the CURSOR-DOWN/UP knob (or the scroll wheel) on the RC-transmitter, can be navigated through the menus. How to Exit CSM To exit CSM, use one of the following methods. Press the MENU/HOME button on the remote control transmitter. Press the POWER button on the remote control transmitter. Press the POWER button on the television set.

5.3

Stepwise Start-up

Standby Soft Mode Command Received, previously in Standby Soft Mode (Power tact switch)

Standby

Switch Off(Mains Power Plug)

TV Wakeup commands Received (TV Wakeup keys)

Digital background tasks started Standby commands Received (RC Standby key)

Digital background tasks completed

SemiStandby

Swith On, previously in Standby/SemiStandby (Mains Power Plug)

TV Wakeup commands Received (TV Wakeup keys)

Standby Soft Mode Command Received, previously in Standby Soft Mode (Power tact switch)

Standby Soft Mode Command Received (Power tact switch)

Switch Off (Mains Power Plug)

Power On

Switch On, previously in Power On Mode (Power tact switch) Standby Soft Mode Command Received, (Power tact switch)

Switch Off (Mains Power Plug)

Standby Soft Mode

Swith On, previously in Standby Soft Mode (Mains Power Plug)

Power Off

Switch Off (Mains Power Plug)

Switch On,previously in TV Operation Mode (Mains Power Plug)


19080_206_110323.eps 120224

Figure 5-1 Stepwise Start-up

back to div. table

2012-Apr-27

EN 20 5.4
5.4.1

5.

TPM9.1E LA

Service Modes, Error Codes, and Fault Finding 5.5


5.5.1

Service Tools
ComPair Introduction ComPair (Computer Aided Repair) is a Service tool for Philips Consumer Electronics products. and offers the following: 1. ComPair helps to quickly get an understanding on how to repair the chassis in a short and effective way. 2. ComPair allows very detailed diagnostics and is therefore capable of accurately indicating problem areas. No knowledge on I2C or UART commands is necessary, because ComPair takes care of this. 3. ComPair speeds up the repair time since it can automatically communicate with the chassis (when the micro processor is working) and all repair information is directly available. 4. ComPair features TV software up possibilities. Specifications ComPair consists of a Windows based fault finding program and an interface box between PC and the (defective) product. The ComPair II interface box is connected to the PC via an USB cable. For the TV chassis, the ComPair interface box and the TV communicate via a bi-directional cable via the service connector(s). The ComPair fault finding program is able to determine the problem of the defective television, by a combination of automatic diagnostics and an interactive question/answer procedure.

Software Upgrading
Description It is possible for the user to upgrade the main software via the USB port. This allows replacement of a software image in a stand alone set. A description on how to upgrade the main software can be found in the DFU or on the Philips website.

5.5.2

Introduction Philips continuously tries to improve its products, and its recommend that the TV software is updated when updates are available. Software update files can be obtained from the dealer or can be downloaded from the following websites: http://www.philips.com/support Preparing a portable memory for software upgrade The following requirements have to be met: 1. A personal computer connected to the internet. 2. An archive utility that supports the ZIP-format (e.g. WinZip for Windows or Stufflt for Mac OS). 3. A FAT formatted USB memory stick (preferably empty). Note: 1. Only FAT/DOS-formatted memory sticks are supported. 2. Only use software update files that can be found on the http://www.philips.com/support web site.

5.5.3 How to Connect This is described in the chassis fault finding database in ComPair.
TO TV
TO UART SERVICE CONNECTOR TO I2C SERVICE CONNECTOR TO UART SERVICE CONNECTOR

Check the current TV software version Before starting the software upgrade procedure, it is advised to check that what the current TV software: 1. Press the 1 2 3 6 5 4 button on the remote control to enter the CSM mode. 2. Use the up/down cursor keys to select Current Main Software. If the current software version of the TV is the same as the latest update file found on http://www.philips.com/support, it is not necessary to update the TV software.

ComPair II RC in RC out

Multi function

Optional Power Link/ Mode Switch Activity

5.5.4
I2C RS232 /UART

Download the latest software 1. Open the internet page http://www.philips.com/support. 2. Find information and software related to the TV. 3. Select the latest software update file and download it to the PC. 4. Insert the USB memory stick into one of the USB ports of the PC. 5. Decompress the downloaded ZIP file and copy the autorun.upg to the root directory of the USB flash drive.

PC

ComPair II Developed by Philips Brugge Optional power 5V DC

HDMI I2C only

5.5.5
10000_036_090121.eps 091118

Update the TV software 1. Turn the TV on and wait for it to boot completely. 2. Insert the USB memory stick that contains the software update files in the TVs USB port. 3. The TV will detect the USB memory stick automatically. Then a window jumps out as Figure 5-3. Note: If the USB flash drive is not detected after power up, disconnect it and re-insert it. 4. Select [Update] and press OK. See Figure 5-3. 5. To proceed, In next menu select [Start] and press OK to start software updates. See Figure 5-4. 6. Upgrading will now begins and the status of the updating progress will be displayed. 7. When the TV software is updated. Remove your USB flash drive, then select [Restart] and press OK to restart the TV.See Figure 5-5.

Figure 5-2 ComPair II interface connection Caution: It is compulsory to connect the TV to the PC as shown in the picture above (with the ComPair interface in between), as the ComPair interface acts as a level shifter. If one connects the TV directly to the PC (via UART), ICs can be blown! How to Order ComPair II order codes: ComPair II interface: 3122 785 91020. Software is available via the Philips Service web portal. ComPair UART interface cable for TPM9.1x xx. (using DB9 to 2mm pitch JST connector): 3122 785 90630. Note: When you encounter problems, contact your local support desk.
2012-Apr-27
back to div. table

Service Modes, Error Codes, and Fault Finding

TPM9.1E LA

5.

EN 21

FUS_clustername_version.zip: Contains the autorun.upg which is needed to upgrade the TV main software and the software download application. NVM_clustername_version.zip: Default NVM content. Must be programmed via ComPair.

5.5.7

How to Copy NVM Data to/from USB When copying data to and from a USB memory stick, the folder repair is used. When inserting an empty USB memory stick, and downloading data to the stick, the TV will create this folder. When sending data from a USB memory stick to a TV, the intended data must be available in the repair folder. Note that when copying EDID data to the TV, all necessary EDID files must be in this folder. Service mode overview for your reference. Table 5-3 Service mode overview
Service Modes SAM Factory Mode SDM CSM Description Service alignment mode Used for extended alignments Service default Mode 3-page compact CSM pages. There will be CSM dump to USB-stick upon entering CSM-mode

19080_207_110324.eps 110324

Figure 5-3 Update the TV software [1/3]

USB SW upgradeable SW-upgrading of flash memories MTK-chips MT5366 can be done via USB. The main SW can be upgraded via Autorun.upg NVM-Editor in SAM Service Data USB copy/paste in SAM UART logging Blind SAM Clear Buffer NVM-editor will function as in the past: Address and Value field is a decimal value via digit entry New Service data in SAM for CTN, Prod. no., 12NC programming with virtual key board Channel list, NVM data, Readable info, EDID There will be printout available in UART. No specifications of the printout, per MTK provision/definition. RC sequence 062598 + Menu + Panel code RC sequence 062599 + OK or via SAM

19080_208_110324.eps 110324

Figure 5-4 Update the TV software [2/3]

5.6
5.6.1

Error Codes
Introduction Error codes are required to indicate failures in the TV set. In principle a unique error code is available for every: Activated (SW) protection. Failing I2C device. General I2C error. The last five errors, stored in the NVM, are shown in the Service menus. This is called the error buffer. The error code buffer contains all errors detected since the last time the buffer was erased. The buffer is written from left to right. When an error occurs that is not yet in the error code buffer, it is displayed at the left side and all other errors shift one position to the right. An error will be added to the buffer if this error differs from any error in the buffer. The last found error is displayed on the left. An error with a designated error code never leads to a deadlock situation. It must always be diagnosable (e.g. error buffer via OSD or blinking LED or via ComPair). In case a failure identified by an error code automatically results in other error codes (cause and effect), only the error code of the MAIN failure is displayed.

19080_209_110324.eps 110324

Figure 5-5 Update the TV software [3/3] Note: Do not remove the USB flash drive during the software update. If a power failure occurs during the update, do not remove the USB flash drive from the TV. The TV will continue the software update as soon as the power comes up again. If an error occurs during the update retry the procedure or contact the dealer. We do not recommend downgrading to an older version. Once the upgrade is finished, use the PC to remove the TV software from the USB portable memory. 5.5.6 Content and Usage of the One-Zip Software File Below you find a content explanation of the One-Zip file, and instructions on how and when to use it. Only files that are relevant for Service are mentioned here. EDID_clustername.zip: Contains the EDID content of the different EDID NVMs. See ComPair for further instructions.
back to div. table

5.6.2

How to Read the Error Buffer You can read the error buffer in three ways: On screen via the SAM/SDM/CSM (if you have a picture). Example: ERROR: 000 000 000 000 000: No errors detected ERROR: 013 000 000 000 000: Error code 13 is the last and only detected error

2012-Apr-27

EN 22

5.

TPM9.1E LA

Service Modes, Error Codes, and Fault Finding


It is assumed that the components are mounted correctly with correct values and no bad solder joints. Before any fault finding actions, check if the correct options are set.

5.6.3

ERROR: 034 013 000 000 000: Error code 13 was detected first and error code 34 is the last detected (newest) error Via the blinking LED procedure (when you have no picture). See paragraph 5.5 Software Upgrading. Via ComPair.

5.8.1

NVM Editor In some cases, it can be convenient if one directly can change the NVM contents. This can be done with the NVM Editor in SAM mode. With this option, single bytes can be changed. Caution: Do not change these, without understanding the function of each setting, because incorrect NVM settings may seriously hamper the correct functioning of the TV set! Always write down the existing NVM settings, before changing the settings. This will enable you to return to the original settings, if the new settings turn out to be incorrect.

Error codes In this chassis only layer 2 error codes are available and point to problems on the SSB. They are triggered by LED blinking when CSM is activated. Only the following layer 2 errors are defined: Table 5-4 Error code table
Layer-2 error code 13 16 27 34 35 Defective device General I2C bus error on the SSB +12 V missing or low, PSU defective Channel decoder error on the SSB Tuner I2C bus error on the SSB EEPROM I2C error on SSB, M24C64

5.8.2

Load Default NVM Values It is possible to upload the default values to the NVM with ComPair in case the SW is changed, the NVM is replaced with a new (empty) one, or when the NVM content is corrupted. After replacing an EEPROM (or with a defective/no EEPROM), default settings should be used to enable the set to start-up and allow the Service Default Mode and Service Alignment Mode to be accessed.

5.6.4

How to Clear the Error Buffer The error code buffer is cleared in the following cases: By using the CLEAR command in the SAM menu By using the CLEAR command in the Factory mode: By using the following key sequence on the remote control transmitter: 062599 directly followed by the OK button. If the contents of the error buffer have not changed for 50 hours, the error buffer resets automatically. Note: If you exit SAM by disconnecting the mains from the television set, the error buffer is not reset. 5.8.4

5.8.3

No Picture When you have no picture, first make sure you have entered the correct display code. See paragraph 6.4 Option Settings for the instructions. See also Table 6-3. Unstable Picture via HDMI input Check (via ComPair or factory mode) if HDMI EDID data is properly programmed.

5.7
5.7.1

The Blinking LED Procedure


Introduction The software is capable of identifying different kinds of errors. Because it is possible that more than one error can occur over time, an error buffer is available, which is capable of storing the last five errors that occurred. This is useful if the OSD is not working properly. Errors can also be displayed by the blinking LED procedure. The method is to repeatedly let the front LED pulse with as many pulses as the error code number, followed by a period of 1.5 seconds in which the LED is off. Then this sequence is repeated. Example (1): error code 4 will result in four times the sequence LED on for 0.25 seconds / LED off for 0.25 seconds. After this sequence, the LED will be off for 1.5 seconds. Any RC command terminates the sequence. Error code LED blinking is in red color. Example (2): the content of the error buffer is 12 9 6 0 0 After entering SDM, the following occurs. 1 long blink of 5 seconds to start the sequence. 12 short blinks followed by a pause of 1.5 seconds. 9 short blinks followed by a pause of 1.5 seconds. 6 short blinks followed by a pause of 1.5 seconds. 1 long blink of 1.5 seconds to finish the sequence. The sequence starts again with 12 short blinks. 5.8.5

No Picture via HDMI input Check if HDCP key is valid. This can be done in CSM.

5.8.6

TV Will Not Start-up from Stand-by Possible Stand-by Controller failure. Re-flash the software.

5.8.7

Audio Amplifier The Class D-IC U6002 has a powerpad for cooling. When the IC is replaced it must be ensured that the powerpad is very well pushed to the PWB while the solder is still liquid. This is needed to insure that the cooling is guaranteed, otherwise the Class D-IC could break down in short time.

5.8.8

CSM When CSM is activated and there is a USB memory stick connected to the TV, the software will dump the complete CSM content to the USB memory stick. The file (Csm.txt) will be saved in the root of the USB memory stick.

5.7.2

Displaying the Entire Error Buffer Additionally, the entire error buffer is displayed when Service Mode SDM is entered.

5.8.9

Loudspeakers Make sure that the volume is set to minimum during disconnecting the speakers in the ON-state of the TV. The audio amplifier can be damaged by disconnecting the speakers during ON-state of the set!

5.8

Fault Finding and Repair Tips


Note:

2012-Apr-27

back to div. table

Service Modes, Error Codes, and Fault Finding


5.8.10 Display option code Attention: In case the SSB is replaced, always check the Panel Code in CSM, even when picture is available. Performance with the incorrect display option code can lead to unwanted side-effects for certain conditions.

TPM9.1E LA

5.

EN 23

back to div. table

2012-Apr-27

EN 24

6.

TPM9.1E LA

Alignments

6. Alignments
Index of this chapter: 6.1 General Alignment Conditions 6.2 Hardware Alignments 6.3 Software Alignments 6.4 Option Settings 6.5 Reset of Repaired SSB In case you have a colour analyser: Measure with a calibrated (phosphor- independent) color analyser (e.g. Minolta CA-210) in the centre of the screen. Consequently, the measurement needs to be done in a dark environment. Adjust the correct x,y coordinates (while holding one of the White point registers R, G or B on max. value) by means of decreasing the value of one or two other white points to the correct x, y coordinates (see Table 6-1 White D alignment values). Tolerance: dx: 0.010, dy: 0.010. Repeat this step for the other colour Temperatures that need to be aligned. When finished return to the SAM root menu and press STANDBY on the RC to store the aligned values to the NVM. Table 6-1 White D alignment values
Value x y Cool (11000 K) 0.276 0.282 Normal (9000 K) 0.287 0.296 Warm (6500 K) 0.313 0.329

6.1

General Alignment Conditions


Perform all electrical adjustments under the following conditions: Power supply voltage: 90 - 264 VAC, 50/ 60 3 Hz. Connect the set to the mains via an isolation transformer with low internal resistance. Allow the set to warm up for approximately 15 minutes. Measure voltages and waveforms in relation to correct ground (e.g. measure audio signals in relation to AUDIO_GND). Caution: It is not allowed to use heat sinks as ground. Test probe: Ri > 10 M, Ci < 20 pF. Use an isolated trimmer/screwdriver to perform alignments.

6.2 6.3

Hardware Alignments
Not applicable.

If you do not have a colour analyser, you can use the default values. This is the next best solution. The default values are average values coming from production (statistics). 6.3.2 Display Adjustment You can use the default values. The default values are average values coming from production. Enter SAM mode. Select a colour temperature (e.g. COOL, NORMAL, or WARM). Set the RED, GREEN and BLUE default values according to the values in Table 6-2. When finished press OK on the RC, then press STORE to store the aligned values to the NVM. Restore the initial picture settings after the alignments. Table 6-2 White tone default settings
Colour temperature Picture mode Normal (9000K) Screen size 32PFL3007 32PFL3017 37PFL3007 42PFL3007 47PFL3007 Cool (11000K) 32PFL3007 32PFL3017 37PFL3007 42PFL3007 47PFL3007 Warm (6500K) Off Off Off Unscaled Off 50 0 100 32PFL3007 32PFL3017 37PFL3007 42PFL3007 47PFL3007 128 128 128 128 128 128 128 113 110 114 128 128 128 128 128 Red Green 116 116 122 122 128 124 124 112 114 116 103 104 110 114 120 Blue 101 101 124 124 104 124 123 128 128 128 59 59 80 78 66

Software Alignments
Put the set in SAM mode (see Chapter 5. Service Modes, Error Codes, and Fault Finding). The SAM menu will now appear on the screen. Select RGB Align and go to one of the sub menus. The alignments are explained below. The following items can be aligned: White point To store the data: Press OK on the RC before the cursor is moved to the left. Select Store and press OK on the RC. Switch the set to stand-by mode. For the next alignments, supply the following test signals via a video generator to the RF input: EU/AP-PAL models: a PAL B/G TV-signal with a signal strength of at least 1 mV and a frequency of 475.25 MHz US/AP-NTSC models: an NTSC M/N TV-signal with a signal strength of at least 1 mV and a frequency of 61.25 MHz (channel 3). LATAM models: an NTSC M TV-signal with a signal strength of at least 1 mV and a frequency of 61.25 MHz (channel 3).

6.3.1

RGB Alignment Before alignment, set the picture as follows:


Picture Setting Dynamic backlight Dynamic Contrast Color Enhancement Picture Format Light Sensor Brightness Color Contrast

This group setting of colour temperature will be applied automatically to the TV / VGA / HDMI / AV sources.

White Tone Alignment: Activate SAM. Select RGB Align. and choose a color temperature. Use a 100% white screen as input signal and set the following values: Red BL Offset and Green BL Offset to 7 (if present). All White point values initial to 128.
back to div. table

2012-Apr-27

Alignments 6.4
6.4.1

TPM9.1E LA

6.

EN 25

Option Settings
Introduction The microprocessor communicates with a large number of I2C ICs in the set. To ensure good communication and to make digital diagnosis possible, the microprocessor has to know which ICs to address. The presence / absence of these MT5366 ICs is made known by the option codes. Notes: After changing the option(s), save them by pressing the OK button on the RC before the cursor is moved to the left, select STORE and press OK on the RC. The new option setting is only active after the TV is switched off / stand-by and on again with the mains switch (the NVM is then read again).

6.5.1

SSB Indentification SSBs of this chassis are identified by a 715 code on the SSB. 715Axxxx-Nnn-MMM-OOOO 715 main category, Printed Wiring Board Axxxx sub category, sequential coding number Nnn Version code N Development number nn Production number MMM Mounting variation code OOOO Optional variation code Make sure when replacing an SSB the SSB identification codes match the replacement board.

6.4.2

Option Code Overview Enter SAM mode to check the option codes. they could not be edited in the NVM.

6.4.3

Display Code Overview Press the following key sequence on a standard RC transmitter: 062598 directly followed by MENU and xxx, where xxx is a 3 digit decimal value of the panel type: see column Display Code in Table 6-3. After resetting the Display Code, restart the set immediately. Table 6-3 Display code overview
CTN_ALT BOM# 32PFL3007 32PFL3017 37PFL3007 42PFL3007 47PFL3007 Panel Type LC320WXE-SCC1 LC320WUE-SCA1 LC370WUE-SCA1 LC420WUE-SCA1 LC470WUE-SCA2 Display Code 154 150 151 152 153

6.5

Reset of Repaired SSB


A very important issue towards a repaired SSB from a Service repair shop (SSB repair on component level) implies the reset of the NVM on the SSB. A repaired SSB in Service should get the service Set type 00PF0000000000 and Production code 00000000000000. Also the virgin bit is to be set. To set all this, you can use the ComPair tool or use the NVM editor and Dealer options items in SAM (do not forget to store). After a repaired SSB has been mounted in the set (set repair on board level), the type number (CTN) and production code of the TV has to be set according to the type plate of the set. For this, you can use the NVM editor in SAM. The loading of the CTN and production code can also be done via ComPair (Model number programming). In case of a display replacement, reset the Operation hours display to 0, or to the operation hours of the replacement display.

back to div. table

2012-Apr-27

EN 26

7.

TPM9.1E LA

Circuit Descriptions

7. Circuit Descriptions
Index of this chapter: 7.1 Introduction 7.2 Power Supply 7.3 DC/DC Converters 7.4 Front-End Analogue and DVB-T, DVB-C; ISDB-T reception 7.5 Front-End DVB-S(2) reception 7.6 HDMI 7.7 Video and Audio Processing - MT5366IVGG/B 7.8 Back-End Notes: Only new circuits (circuits that are not published recently) are described. Figures can deviate slightly from the actual situation, due to different set executions. For a good understanding of the following circuit descriptions, please use the wiring, block (see chapter 9. Block Diagrams) and circuit diagrams (see chapter 10. Circuit Diagrams and PWB Layouts).Where necessary, you will find a separate drawing for clarification.

7.1

Introduction
The TPM9.1E LA platform makes use of two different SSBs. They both use the MT5366, as main processor. It combines a transport de-multiplexer, a high definition video decoder, an AC3 decoder, a dual-link LVDS/mini-LVDS transmitter, and an NTSC/PAL/SECAM TV decoder with a 3D comb filter (NTSC/PAL). The difference between the two SSBs is at the front end where the 715G5163 board holds an extra S2 tuner compared to the 715G5155 SSB.

7.1.1

Implementation Key components of this chassis are: MT5366IVGG/B System-On-Chip (SOC) TV Processor Panasonic ENV57U09D5F Tuner (DVB T/C, analogue) LG TDTK-G731D Tuner (DVB T/C/S2, digital) MT5135AE DVB T/C demodulator TMDS361BPAGR HDMI Switch for 3500 series STA381BWTR Audio amplifier TPS54319RTER DC/DC RTL8201FL-VB-CG ethernet media access controller

7.1.2

TPM9.1E Architecture Overview For details about the chassis block diagrams refer to Figure 9.5.

2012-Apr-27

back to div. table

Circuit Descriptions
7.1.3 SSB Cell Layout xxPFL30x7H/T

TPM9.1E LA

7.

EN 27

DC/DC

COMMON INTERFACE

DDR

MT5366

USB TUNER

SCART AUDIO AMP SERVICE CONNECTOR

Headphone

ANALOG I/O

NETWORK HDMI SWITCH

HDMI

19240_200_120224.eps 120224

Figure 7-1 xxPFL30x7H/T SSB layout cells (top view)

back to div. table

2012-Apr-27

EN 28
7.1.4

7.

TPM9.1E LA

Circuit Descriptions

SSB Cell Layout xxPFL30x7K

COMMON INTERFACE DC/DC

DDR

MT5366

USB

TUNER

NETWORK

SCART

Headphone

ANALOG I/O

TUNER

SERVICE CONNECTOR

HDMI SWITCH

AUDIO AMP

HDMI

19240_201_120224.eps 120224

Figure 7-2 xxPFL30x7K SSB layout cells (top view)

2012-Apr-27

back to div. table

Circuit Descriptions 7.2 Power Supply


Refer to figure Figure 7-3 for the power architecture of this platform.

TPM9.1E LA

7.

EN 29

AMP
CN8101 24V

LVDS AMP
12V

Display power
CN8102

Platform power
BL-ON/OFF DIM 12V 24V 5V

Platform MTK5366
CN7001

Low stby power

PFC

Ac-input + Mains filter


AC IN CN902

1 power- PCB

19230_202_120309.eps 120309

Figure 7-3 Power Architecture 3500 series 7.2.1 Power Supply Unit All power supplies for TVs that are using a CCFL back lit LCD panel are outside the repair policy. However when defective, first check the main fuse of the power board. Always replace a defective fuse with one with the correct specifications! This part is available in the regular market. Consult the Philips Service web portal for the order codes of the boards. The used control signals are: Stand-by Inverter on/off DIM (PWM) The output voltages to the chassis are: +3V3-STANDBY (Stand-by mode only) +12V (on-mode) +Vsnd (+24V) (audio power) (on-mode) +24V (bolt-on power) (on-mode) Output to the display; in case of - IPB: High voltage to the LCD panel - PSL and PSLS (LED-driver outputs) - PSDL (high frequent) AC-current. 7.2.2 Diversity The diversity in power supply units is mainly determined by the diversity in displays. The following displays can be distinguished: CCFL/EEFL backlight: power board is conventional IPB
back to div. table

LED backlight: - side-view LED without scanning: PSL power board - side-view LED with scanning: PSLS power board - direct-view LED without 2D-dimming: PSL power board - direct-view LED with 2D-dimming: PSDL power board.

PSL stands for Power Supply with integrated LED-drivers. PSLS stands for a Power Supply with integrated LED-drivers with added Scanning functionality (added microcontroller). PSDL stands for a Power Supply for Direct-view LED backlight with 2D-dimming. 7.2.3 Connector overview Table 7-1 Connector overview
Connector 3xPFL35x7 no. Descr. Pin 1 2 3 4 5 6 7 8 9 10 CN801 to panel 3 L L L CN802 to panel 3 L L L 4xPFL35x7 CN8503 to panel 13 ON/OFF PDIM +12V +12V GND GND GND +24V +24V PS_ON CN9901 Mains inlet 2 L N -

2012-Apr-27

EN 30

7.

TPM9.1E LA
Connector 3xPFL35x7

Circuit Descriptions

4xPFL35x7 CN802 to panel 3 CN8503 to panel 13 +5V +5V NC CN9901 Mains inlet 2 -

no. Descr. Pin 11 12 13

CN801 to panel 3 -

7.3

DC/DC Converters
The on-board DC/DC converters deliver the following voltages (depending on set execution): +5V2-STANDBY, permanent voltage for the Stand-by controller, LED/IR receiver and controls; connector CN9302/CN902 pins 2 and 3 +12V, input from the power supply for the panel common (active mode); connector CN9302/CN902 pins 10 and 11 +24V, input from the power supply for audio amplifier, connector CN9302/CN902 pins 5 and 6 +1V1, core voltage supply for MT5366; has to be started up first and switched off last (diagram B01) +1V2, supply voltage for power supply for the scaler IC MT5366 +1V5, supply voltage for DDR2 (diagram B11) +3V3, general supply voltage (diagram B01) +5V-TUN, supply voltage for tuner (diagram B02) +5V-USB, input intermediate supply voltage for USB (diagram B01) +3V3 from the power supply for the scaler IC MT5366 +3V3-DVBS, clean voltage for DVB-S2 channel decoder +1V-DVBS, core voltage for DVB-S2 channel decoder. Figures gives a graphical representation of the DC/DC converters with its current consumptions:

19240_204_120224.eps 120224

Figure 7-5 Front-End analogue block diagram 7.4.2 DVB-T/C DTV The Front-End for DVB-T/C DTV consist of the following key components: ENV57U09D5F MT5366IVGG/B Demodulator MT5135AE/A

Below find a block diagram of the front-end application for DVB-T/C DTV.

19240_205_120224.eps 120224

Figure 7-6 Front-End DVB-T/C DTV block diagram 7.4.3 DVB-T2 DTV The Front-End for DVB-T/C DTV consist of the following key components:
19240_203_120224.eps 120224

Figure 7-4 DC/DC converters xxPFL35x7 series

ENV57U04D8F MT5366IVGG/B Demodulator MT5135AE/A

7.4
7.4.1

Front-End Analogue and DVB-T, DVB-C; ISDB-T reception


Front-End Analogue The Front-End for the analogue tuner consist of the following key components: ENV57U09D5F MT5366IVGG/B

Below find a block diagram of the front-end application for DVB-T2 DTV.

Below find a block diagram of the front-end application for analogue.

2012-Apr-27

back to div. table

Circuit Descriptions

TPM9.1E LA

7.

EN 31

19240_206_120224.eps 120224

Figure 7-7 Front-End DVB-T2 DTV block diagram

7.5

Front-End DVB-S(2) reception


The Front-End for the DVB-S(2) application consist of the following key components: AVL6211LA MT5366IVGG/B TDQS-A901F Demodulator MT5135AE/A

19240_208_120224.eps 120224

Figure 7-9 HDMI input configuration The hardware default I2C addresses are: TMDS361B: 0xB0/0xB2 (random: software workaround) TMDS361B: 0xB2 (fixed). The TMDS361B has the following specifications: +5V detection mechanism Stable clock detection mechanism Integrated EDID RT control HPD control Sync detection TMDS output control CEC control

Below find a block diagram of the front-end application for DVB-S(2) reception.

7.7
19240_207_120224.eps 120224

Video and Audio Processing - MT5366IVGG/B


The MT5366IVGG/B is the main audio and video processor (or System-on-Chip) for this platform. It has the following features: Multi-standard digital video decoder (MPEG-2, H.264, MPEG-4) Integrated DVB-T/DVB-C/DVB-S channel decoder Integrated CI+ Integrated motion accurate picture processing High definition ME/MC Extended colour gamut and colour booster Integrated USB2.0 host controller Improved MPEG artefact reduction Security for customers own code/settings (secure flash).

Figure 7-8 Front-End block diagram DVB-S(2) reception This application supports the following protocols: Polarization selection via supply voltage (18 V = horizontal, 13 V = vertical) Band selection via toneburst (22 kHz): tone on = high band, tone off = low band Satellite (LNB) selection via DiSEqC 1.0 protocol Reception of DVB-S (supporting QPSK encoded signals) and DVB-S2 (supporting QPSK, 8PSK, 16APSK and 32APSK encoded signals), introducing LDPC low-density parity check techniques.

7.6

HDMI
In this platform, the TMDS361BPAGR HDMI multiplexer is implemented. Refer to figure 7-9 HDMI input configuration for the application.

The MT5366IVGG/B combines front-end video processing functions, such as DVB-T channel decoding, MPEG-2/H.264 decoding, analog video decode and HDMI reception, with advanced back-end video picture improvements. High flat panel screen resolutions and refresh rates are supported with formats including 1366 768 @ 50 Hz and 1920 1080 @ 50 Hz. The combination of Ethernet, CI+ and H.264 supports new TV experiences with IPTV and VOD. On top of that, optional support is available for 2D dimming in combination with LED backlights for optimum contrast and power savings up to 50%. For a functional diagram of the MT5366IVGG/B, refer to Figure 8-1.

back to div. table

2012-Apr-27

EN 32 7.8

7.

TPM9.1E LA

Circuit Descriptions

Back-End
The back-end of this chassis is integrated in the main processor and is connected via LVDS to the 50 Hz CCFL back lit LCD panel. Refer to section 7.2.2 Diversity for an in-depth explanation of the different power boards that are used.

Integrated Tcon 50/60 Hz ASIC

Backlight LED

MT5366
SSB

1M99

IPB PSL
Lamp-ON

19240_210_120224.eps 120328

Figure 7-10 LED back lit power scheme.

Current

PWM

2012-Apr-27

back to div. table

IC Data Sheets

TPM9.1E LA

8.

EN 33

8. IC Data Sheets
This chapter shows the internal block diagrams and pin configurations of ICs that are drawn as black boxes in the electrical diagrams (with the exception of memory and logic ICs).

8.1

Diagram 10-1-3 Peripheral B02, MT5366IVGG/B PBGA-479 (IC U401)

Block diagram

VADC 4

MT5366CV

19080_300_110316.eps 120102

Figure 8-1 Internal block diagram

back to div. table

2012-Apr-27

EN 34

8.

TPM9.1E LA

IC Data Sheets

Pinning information MT5366CV [1/2]


479 A B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE LB 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12

19080_301_110316.eps 120102

Figure 8-2 Pin configuration [1/2]

2012-Apr-27

back to div. table

IC Data Sheets

TPM9.1E LA

8.

EN 35

Pinning information MT5366CV [2/2]


13 14 15 16 17 18 19 20 21 22 23 24 25 RT A B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE 13 14 15 16 17 18 19 20 21 22 23 24 25 RB

19080_302_110316.eps 120102

Figure 8-3 Pin configuration [2/2]

back to div. table

2012-Apr-27

EN 36 8.2

8.

TPM9.1E LA

IC Data Sheets

Diagram 10-1-6 Speaker B06, STA381BWTR (IC U602)

Block diagram
STA381BW
4 Half Bridges
OUT 1A OUT 1B OUT 2A OUT 2B FFX3A FFX3B FFX4A FFX4B F3XL F3XR

MCLK

2.1 Channel Audio Processor


STAudioFx TM STSpeakerSafe TM Parametric EQ Volume Bass and Treble Speaker Compensation Stereo Widening

LRCKI BICKI SDI

FFXTM Modulator
Binary Ternary

LINEINL LINEINR Headph one (2Vrms)

LINEHPOUT_L LINEHPOUT_R SOFT_MUTE

TESTMODE PWDN INTLINE RESET SA SDA SCL

Control logic & Protections IIC PLL

-3.3V

CPVSS

Negative Charge Pump

CPP CPM

REG_M3

VDD3V3CHP

2 x GNDDIG

GNDPSUB

VDD_REG

VCC_REG

AGNDPLL

2 x VDDDIG

VSS_REG

F3X_FILT

2 x GND

2 x VCC

GND_REG

Pinning information
GNDDIG2 VDDDIG2 TESTMODE INTLINE RESET PWDN LRCKI 38 BICKI 37 SDA SCL SA SDI

48

47

46

45

44

43

VREGFILT

42

41

40

VCC_REG VSS_REG OUT2B GND2 VCC2 OUT2A OUT1B VCC1 GND1 OUT1A VDD_REG GND_REG

1 2 3 4 5 6 7 8 9 10 11 12

39

GNDA

36 35 34 33 32 31 30 29 28 27 26 25

MCLK AGNDPLL VREGFILT TWARNEXT/FFX4B EAPD/FFX4A FFX3B FFX3A GNDDIG1 VDDDIG1 VDD3V3CHP CPP GNDPSUB

STA381BW

13

14

15

16

17

18

19

20

21

22

23 CPVSS

F3X_FILT

LINEINR

LINEHPOUT_R

LINEHPOUT_L

SOFTMUTE

VDD3V3

LINEINL

GNDA

F3XR

F3XL

CPM

24

19240_300_120221.eps 120224

Figure 8-4 Internal block diagram and pin configuration

2012-Apr-27

back to div. table

IC Data Sheets 8.3

TPM9.1E LA

8.

EN 37

Diagram 10-1-13 HDMI Switch & Connector B13, TMDS361BPAGR (IC U500)

Block diagram
Vcc
RINT RINT

Dx+_1
TMDS Rx w/ AEQ

Dx_1

TMDS361B

Vcc
RINT RINT

CLK+_1
TMDS Rx

CLK_1
Clock Detect

Tx SCL1 Rx
TMDS Tx

VSadj

Dx+_SINK Dx_SINK

Tx SDA1 Rx 3:1 MUX


TMDS Tx

xx2

CLK+_SINK CLK_SINK Rx SCL_SINK Tx Rx SDA_SINK Tx

Vcc
RINT RINT

Dx+_3
TMDS Rx w/ AEQ

Dx_3

Vcc
RINT RINT

CLK+_3
TMDS Rx

CLK_3
Clock Detect Clock Detect

Tx SCL3 Rx Tx SDA3 Rx

HPD_SINK HPD1 I2C_SEL


2

HPD2

and

LP S1/SCL

HPD3 S2/SDA
B0330-01

Pinning information
HPD3 D2+_2 D2_2 VCC D1+_2 D1_2 GND D0+_2 D0_2 VCC CLK+_2 CLK_2 SCL2 SDA2 HPD2 LP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33

SDA3 SCL3 GND CLK_3 CLK+_3 VCC D0_3 D0+_3 GND D1_3 D1+_3 VCC D2_3 D2+_3 GND VSadj

TMDS361B

D2+_1 D2_1 VCC D1+_1 D1_1 GND D0+_1 D0_1 VCC CLK+_1 CLK_1 SCL1 SDA1 HPD1 I2C_SEL S2/SDA

D2+_SINK D2_SINK VCC D1+_SINK D1_SINK GND D0+_SINK D0_SINK VC C CLK+_SINK CLK_SINK GND SCL_SINK SDA_SINK HPD_SINK S1/SCL

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

19240_301_120221.eps 120221

Figure 8-5 Internal block diagram and pin configuration

back to div. table

2012-Apr-27

EN 38 8.4

8.

TPM9.1E LA

IC Data Sheets

Diagram 10-1-14 DVB T/C Demodulator MT5135 B14, MT5135AE/A LQFP-128 (IC U103)

Block diagram
Other demodulators TS interface CAM

PCMCIA interface

RSSI

RSSI ADC

MT5135AE
CI+ controller

PVR playback TS PVR recording TS Demod TS

RF AGC AGC Differential IF signal PGA 10-bit ADC Integrated SAW filter function DVB-T demodulator Tuner SDA SIF Master Tuner SCL Microcontroller SPI transceiver DVB-C demodulator Demod TS output FEC decoder

RF Tuner

Main decoder chip

SPI interface

Pinning information
DVD D33 REA DY DVD D10 DVSS DVD D33 IOW R_ DVSS IOR D_ DVSS VS1 _ WE_ CE1_ A 17 A 23 A 16 A 22 A 21 A 11 OE_ A 10 D15 D14 A 20 A 14 A 19 A 13 A 18 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 A15 97 A24 98 A12 99 A25 100 A7 101 VS2_ 102 A6 103 CMCIA_RESET 104 Ex t ern al d emo d in t er f ac e A5 105 WAIT_ 106 A4 107 A3 108 DVSS 109 DVDD33 110 REG_ 111 DVSS 112 DVDD10 113 A2 114 BVD2 115 Tu n er in t er f ac e A1 116 BVD1 117 A0 118 D8 119 D0 120 D9 121 D1 122 D10 123 D2 124 CD2_ 125 CI_INT 126 DVSS 127 DVDD33 128 1 SP I_CL E 2 D SP I_ A TA 3 C S P I_ L K 4 PVR_T S_DA T A 1 5 PVR_T S_DA T A 0 6 PVR_TS _SYNC 7 PVR_T S_VAL 8 PVR _TS_CL K 9 10 CI_T S_DA T A 0 CI_TS _SYNC 11 12 13 14 15 16 DVS S DVDD3 3 DEM OD_T S_SYNC DEM OD_T S_DA T A 0 CI_TS_CL K CI_T S_VA L 17 18 19 20 21 22 23 24 25 26 27 28 A VD D3 3 A V SS33 A VD D1 2 A VD D3 3 A D IN0 DVDD1 0 A V SS33 TN DE MOD_ TS_C LK DEM OD_T S_VAL M T5135_R ST_B TP 29 30 31 32 XTA L I XTA L O A VD D3 3 A V SS33 Host chip and TS interface Analog interface CI interface 64 D5 63 D12 62 D4 61 D11 60 D3 59 CD1_ 58 CHIP_CTRL 57 S2_TS_DATA7 56 S2_TS_DATA6 55 S2_TS_DATA5 54 S2_TS_DATA4 53 S2_TS_DATA3 52 S2_TS_DATA2 51 S2_TS_DATA1 50 DVDD33 49 DVSS 48 S2_TS_DATA0 47 S2_TS_VAL 46 S2_TS_SYNC 45 S2_TS_CLK 44 RF_AGC 43 IF_AGC 42 TUNER_CLK 41 TUNER_DATA 40 DVDD10 39 DVSS 38 AVDD33 37 AVDD12 36 IFPGA_INP 35 IFPGA_INN 34 AVSS12 33 EXT_CLKSEL D13 A9 D7 D6 A8

MT5135AE

19080_303_110317.eps 110330

Figure 8-6 Internal block diagram and pin configuration

2012-Apr-27

back to div. table

IC Data Sheets 8.5 Diagram 10-1-15 DVB-T/C/T2 Tuner B15, AVL6211LA (IC U104)

TPM9.1E LA

8.

EN 39

Block diagram
Carrier Phase Recovery PL Frame Processor DVB FEC Viterbi/RS Decoder Dual 10 - Bit ADC MPEG TS Output

RFAGC

ADC_I

Digital Front-end Down Converter

Equalizer

TS Output Interface

ADC_Q

PLL

Symbol Timing Recovery

AVL6211LA

LDPC & BCH FEC Decoder

Tuner Control Interface

DiSEqC 2.0 Control Interface

Two -wire Bus Controller

JTAG

Pinning information
LNB_CNTRL_1 LNB_CNTRL_0 DISEQC_OUT DISEQC_IN SLEEP 49 RST_B VDDIO VDDC SDA2 SDA1 51 SCL2 SCL1 50 CS_0 GND GND GND 52

63

60

59

58

57

56

55

54

64

62

ADC_AVDD ADC_AVSS ADC_IP ADC_IN ADC_AVSS ADC_AVDD ADC_QP ADC_QN PLL_AVDD PLL_AVSS VDDC GND VDDC PLL_REFCLK_XI PLL_REFCLK_XO RFAGC

61

53

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

48 47 46 45 44 43 42 41

VDDC GND MPEG_ERR MPEG_SYNC MPEG_VALID VDDIO GND VDDC MPEG_CLK MPEG_DATA_0 MPEG_DATA_1 GND VDDIO VDDC MPEG_DATA_2 MPEG_DATA_3

AVL6211LA

40 39 38 37 36 35 34 33

MPEG_DATA_7

VDDC

MPEG_DATA_6

GND

GPIO_CLK

VDDIO

LOCK

GND

TMS

MPEG_DATA_5

MPEG_DATA_4

TCLK

TRST_N

VDDIO

TDO

TDI

19240_305_120221.eps 120221

Figure 8-7 Internal block diagram and pin configuration

back to div. table

2012-Apr-27

EN 40 8.6

8.

TPM9.1E LA

IC Data Sheets

Diagram 10-1-15 DVB-T/C/T2 Tuner B12, RTL8201EL-VC-GR (IC U4010)

Block diagram

RTL8201FL

Pinning information
L E D 0/ P H YA D[ 0] GND INTB C RS/CR S_DV L E D 1/ P H YA D[ 1] PHYRST B DV D D1 0

RTL8201FL

M DI O MDC

M DI - [ 1]

NC M DI + [ 1]

NC PMEB NC

T X D[ 3]

AV D D 33 GND

M DI +[ 0]

M DI -[ 0]

TXER

NC

T X D[ 2]

TXEN

19240_302_120221.eps 120221

Figure 8-8 Internal block diagram and pin configuration

2012-Apr-27

back to div. table

IC Data Sheets 8.7 Diagram 10-2-2 System Power 2 B02, LNBH23QTR (IC U751)

TPM9.1E LA

8.

EN 41

Block diagram
LX
PWM PWM Controller Controller

ISEL

TTX

ADDR

SDA SCL

Vcc

Byp

Vcc- L

LNBH23
EN VSEL VSEL TTX ITEST

Preregulator +U.V.lockout +P.ON reset

Rsense

P-GND

EN

IC interface

Vup
VOUT Control TEN

VoRX

Linear Post-reg +Modulator +Protections +Diagnostics


22KHz Oscill.

IC Diagnostics

VoTX
TTX 22KHz Tone Amp. Diagn. 22KHz Tone Freq. Detector

DETIN

EXTM

DSQOUT DSQIN VCTRL A-GND

ADDR

DSQIN

EXTM

SCL

TTX

BYP

NC

Pinning information

DSQOUT

NC NC SDA P-GND LX NC NC NC

NC VCC-L VCC

LNBH23

A-GND VoRX VoTX NC NC

VCTRL

DETIN

ISEL

NC

VUP

NC

NC

NC

19240_304_120221.eps 120221

Figure 8-9 Internal block diagram and pin configuration

back to div. table

2012-Apr-27

EN 42

8.

TPM9.1E LA

IC Data Sheets

Personal Notes:

10000_012_090121 110

2012-Apr-27

back to div. table

Block Diagrams

TPM9.1E LA

9.

EN 43

9. Block Diagrams
9.1 Wiring diagram 32" DVB T/C 3000

WIRING DIAGRAM 32" DVB T/C


Board Level Repair

(3000)

Component Level Repair Only for authorized workshops

to panel to panel to panel

CN9002 13P CI CN802 3P CN4010 40P

(1054)

KEYBOARD CONTROL

CN801 3P

CN7001 12P

MAIN POWER SUPPLY

B
CN6002 3P

SSB
(1053)
USB2

CN01 3P

(1057)

SERV .U SCART (RGB/CVBS) TV ANTENNA

USB1

VGA

AUDIO IN DVI/VGA CVBS/Y Pb Pr

HDMI

N CN9901

CN6004 4P

DIGITAL AUDIO OUT

HDMI 2

CN4003 12P
CN001 3P

HDMI1 ARC

CN201 6P

IR/LED BOARD (1056)

LOUDSPEAKER

LOUDSPEAKER

19230_400_120320.eps 120316

2012-Apr-27 back to

div. table

Block Diagrams
9.2 Wiring diagram 37" DVB T/C/S2 3000

TPM9.1E LA

9.

EN 44

WIRING DIAGRAM 37" DVB T/C/S2


Board Level Repair Component Level Repair Only for authorized workshops

(3000)

to panel

to panel

CI

CN8102 3P

CN9302 13P

CN8101 3P

MAIN POWER SUPPLY


(1054)

CN700 12P

B
CN401 12P

SSB
(1053)

KEYBOARD CONTROL

VGA

(RGB/CVBS)

SCART

3P CN01 (1057)

AUDIO IN
DVI/VGA

SAT

SERV.U

CN9901

CN602 3P

L CVBS/Y
TV ANTENNA

CN601 4P

R Pb

Pr DIGITAL AUDIO OUT

HDMI 2

HDMI1 ARC

LOUDSPEAKER

LOUDSPEAKER
CN001 3P

CN201 6P

IR/LED BOARD (1056)

HDMI

USB

COMMON INTERFACE

CN408 40P

19230_401_120302.eps 120316

2012-Apr-27 back to

div. table

Block Diagrams
9.3 Wiring diagram 42" DVB T/C/S2 3000

TPM9.1E LA

9.

EN 45

WIRING DIAGRAM 42" DVB T/C/S2


Board Level Repair Component Level Repair Only for authorized workshops

(3000)

CN8102 3P

CN408 40P
COMMON INTERFACE
SAT

CONTROL

CN9302 13P

CN8101 3P

MAIN POWER SUPPLY


(1054)

CN700 12P

CN01 KEYBOARD (1057) 3P

SSB
(1053)

CN401 12P

VGA SCART

(RGB/CVBS)

L
CN602 3P

SERV.U

AUDIO IN
DVI/VGA

USB

to panel

to panel
CVBS/Y

CN9901

R Pb HDMI 2

TV ANTENNA

CN601 4P

Pr DIGITAL AUDIO OUT

LOUDSPEAKER
CN001 3P

CN201 6P

IR/LED BOARD (1056)

LOUDSPEAKER

HDMI

HDMI1 ARC

19230_402_120306.eps 120316

2012-Apr-27 back to

div. table

Block Diagrams
9.4 Wiring diagram 47" DVB T/C 3000

TPM9.1E LA

9.

EN 46

WIRING DIAGRAM 47" DVB T/C


Board Level Repair Component Level Repair Only for authorized workshops

(3000)

CN01 KEYBOARD (1057) 3P

CONTROL

CI

CN8102 3P

CN8101 3P

to panel

MAIN POWER SUPPLY


(1054)

CN9302 13P

CN7001 12P

CN4010 40P

B
CN6002 3P
SERV .U

SSB
(1053)
USB2

to panel

VGA

SCART (RGB/CVBS)

TV ANTENNA

USB1

AUDIO IN DVI/VGA CVBS/Y Pb Pr

N CN9901

CN6004 4P

HDMI

DIGITAL AUDIO OUT

HDMI 2

HDMI1 ARC

CN4003 12P

CN001 3P

CN201 6P

IR/LED BOARD (1056)

LOUDSPEAKER

LOUDSPEAKER

19230_403_120306.eps 120314

2012-Apr-27 back to

div. table

Block Diagrams
9.5 Block Diagram DVB T/C

TPM9.1E LA

9.

EN 47

CI card slot (CAM) CI/CI+ DBV-T/C DEMUX T/C RF Tuner Tuner I2C CI+ controller MT5135 DEMOD_TS SPI

DDR3 1.33 GHz 128 MByte 2

NAND Flash 256 MByte

MT5366
MCU ARM11 MPEG/video/audio decoder Scaling

SPDIF Out UART (ISP & Factory alignment)

DIF +/-

RJ45 EDID 24C02 HDMI 3 EDID 24C02 EDID 24C02

Video enhancement 3D comb

Audio PreAmp NJM4580 I2S Audio AMP STA381BW

SCART L/R out

HDMI 1 3 SW TMDS 361B NVM 24C128 System I2C

LVDS Transmitter HDMI 1.4 ADC H.264 T -con IC Build -in HDMI EDID 4 min LVDS Transmitter Sawless ATD build-in

Speakers Headphone

Analog Video inputs: YPbPr 1 CVBS share with Y Full SCART 1 Analog Audio inputs: PC VGA

12 V/5 V

LVDS

Panel (50 Hz)

Audio R/L of CVI / CVBS Audio R/L of SCART Audio R/L of PC/ DVI S35 USB 2 USB Protect G5250 2 RC Local Key pad

19240_403_120224.eps 120314

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts

TPM9.1E LA

10.

EN 48

10. Circuit Diagrams and PWB Layouts


10.1 B 715G5155 DVB-T/C SSB 3000/3500 series
10-1-1 System Power 1

B01

System Power 1
STANDBY POWER +5VSB from STB_PWR5V ANALOG POWER AVDD1V2 from AVDD3V3
AVDD3V3 STB_PWR5V FB7002 120R/3000mA 1 2 FB7003 120R/3000mA 1 2 + C7004 220UF 16V C7005 NC/100N 16V +5VSB 3 C7002 NC/10UF 10V U7002 NC/G1117T63Uf 2 VIN VOUT
GND TH

B01
AVDD1V2 R7002 NC/0R05 4A 1/4W C7003 NC/22UF 6.3V PWR_ON/OFF OPWRSB BRIGHT_ADJ INVERTER_ON_OFF PWR_ON/OFF 3 OPWRSB 4 BRIGHT_ADJ 11 INVERTER_ON_OFF 11 GND 3,4,5,6,7,8,9,10,11,12,13,14,15,16,17

DC POWER INPUT
BRIGHT_ADJ: Normal:Max:+3V3, Min:0V Stand_By:0V INVERTER_ON_OFF: Normal: High Stand_By: Low
INVERTER_ON_OFF BRIGHT_ADJ
(45mVr)

CN7001 1 2 3 4 5 6 7 8 9 10 11 12 CONN

STANDBY: Normal: High Stand_by: Low


+5VSB 3V3SB +12V 3V3SB R7007 NC/15K 1/16W 5% 16V_24V R7009 STANDBY STANDBY R7011 10K 1/16W 5% Q7003 BC847C R7008 10K 1/16W 5%

TP7002 TP7001 TP7003

TP7005 TP7006 TP7007

TP7004

R7003 NC/120R 1% 1/10W R7004 NC/1 OHM 1/10W

Vo=1.25 x (1+1R/120R) = 1.25V


(264.5mA Max.)

0R05 4A 1/4W R7005


(64mVr)

R7006 0R05 4A 1/4W PWR_ON/OFF STB_PWR5V C7007 NC/22UF 6.3V R7010 NC/10KOHM +-5% 1/8W

OPWRSB: Normal: Low Stand_by: High

+5V_SW

DVDD3V3

(52mVr)

NC/100R 1/16W 5% R7027 100R 1/16W 5% POWER_ON

R7234 NC/10K 1/16W 5% OPWRSB

R7039 NC/1K1/16W

R7040 1K 1/16W 5%

POWER_ON R7041 10K 1/16W 5% Q7006 BC847C R7024 22K 1/16W 5% OPWRSB

GPIO 216
R7017 22K 1/16W 5%

STAND_BY: Normal: Low Stand_by: High

DIGITAL/ANALOG POWER DVDD3V3/AVDD3V3 from +5V_SW


DVDD3V3 AVDD3V3 ADAC_PWR R7031 0R051/8W
2

ANALOG POWER AVDD3V3 from +5V_SW


+5V_SW 3 1 U7008 AZ1117D-ADJTRE1 INPUT OUTPUT ADJ/GND C7034 10UF 10V R7238 120R 1/16W 1% 2

R7020

AVDD3V3

R7032 0R05 4A 1/4W +5V_SW U7005 G1084-33TU3Uf 3 VIN VOUT


GND

0R05 4A 1/4W

FB7006 NC/220R/2000mA 2 0R05 4A 1/4W


1

STANDBY POWER 3V3SB from +5VSB


+5VSB 3 U7003 G1117-33T63Uf VI
GND

R7013

100UF 16V C7027

1.25 x (1+200/120) = 3.333V


+ 100UF 16V C7022 R7237 200R 1/16W 1% C7008 1UF16V

VO

R7012

3V3SB

0R05 4A 1/4W C7009 10UF 10V

C7029 100N 16V

ANALOG POWER for PWMDAC 3.3V CORE POWER VCCK form +5VSB by OPWRSB
+5VSB Q7002 AON4421 8 1 D 2 7 D D 3 6 D D D 4 5 S G
2

+5VSB to +5V_SW by VCCK


R7023

+5V_SW

0R05 4A 1/4W

FB7004 220R/2000mA L7001 U7004 TPS54319RTE 16 1 2 15 6 7 8 9 VIN PH VIN PH VIN PH EN BOOT VSNS PWRGD COMP GND RT/CLK GND SS AGND
PwPd 17 1

VCCK R7014 0R05 4A 1/4W


C7030 NC/10UF 10V C7021 10UF 10V C7017 10UF 10V C7023 10UF 10V

+5VSB

C7015 100N 16V

C7011 10UF 10V


1K5 1/10W 5% C7013 R7016 180K 1/10W 1% R7029

10 11 12 13 14 3 4 5

C7016

4.7uH

VCCK(+5V_SW ON/OFF): Normal: High Stand_By: Low


R7022 33K 1/10W 5%

C7024 NC/10UF 10V C7026 2.2U10V

100N 16V

C7025 100N 16V R7001 2K7 1/16W 5% VCCK

R7025 20K 1/10W 5% Q7001 BC847C C7001 100N 16V

R7018 1K5 1%

22NF25V

STANDBY

R7015 4K7 1/16W 5% C7012 1UF16V

C7010 10nF50V

R7019 12K 1/10W 1%

R7028 33K 1/10W 1%

2011-12-19

System Power 1

715G5155
19230_500_120207.eps 120420

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-2 System Power 2

TPM9.1E LA

10.

EN 49

B02

System Power 2
PANEL_VCC_ON/OFF PANEL_VCC_ON/OFF 13 GND

B02
PANEL_VCC +5V_SW +12V

PANEL POWER PANEL_VCC from +12V

TUNER POWER +5V_TUNER from +16V via 12V_TUN


R7021 NC/0R05 4A 1/4W

GND

2,4,5,6,7,8,9,10,11,12,13,14,15,16,17

PWR_ON/OFF

PWR_ON/OFF 2

R7030 NC/0R05 4A 1/4W

R7026 0R05 4A 1/4W

Q7004 AON4421 8 7 6 5 D D D S D D D G 1 2 3 4 + C7038 100UF 16V

PWR_16V_24V R7034 NC/0R05 4A 1/4W C7033 NC/330NF 25V

U7007 NC/AS7812ADTR-G1 1 3 IN OUT


GND

+12V_TUN

C7039 1UF16V R7035 10K 1/10W 5% R7036

C7035 NC/100N 16V

C7032 NC/10uF 25V

ON OFF
7K5 1/10W 5%

PANEL_VCC ON/OFF: Normal:High Stand_By:Low


R7038

R7037 5.1K 1/10W

PANEL_VCC_ON/OFF

10K 1/16W 5%

TUNER POWER +5V_TUNER from +12V/+12V_TUN


Q7005 BC847C +5V_SW D7001 NC/SCS0520P 2 R7239 1 +12V_TUN R7033 1 NC/0R05 4A 1/4W
GND

+5V_TUNER

GPIO 16

SMD/0402 C7040 4.7uF 10V

+12V

FB7005 220R/2000mA 2 330N 25V C7018

NC/0R05 1/16W U7006 AS7805DTR-E1 1 3 IN OUT

PWR to 24V or 16V for AUDIO


24V(DL)/16V(DS)
16V_24V R7046 0R05 1/4W

C7031 100UF 16V

C7019 10UF 25V

C7020 100N 16V

C7028 22uF 10V

+24V or 16V
PWR_16V_24V

Q7007 C7006 NC/4.7uF 50V R7045 NC/10K 1/16W 5% 8 7 6 5 D D D S D D D G 1 2 3 4

NC/AON4421 C7014 NC/1uF 25V R7043 NC/5K1 1/16W 5% R7044 NC/7K5 1/16W 5% PWR_ON/OFF R7042 NC/47K 1/16W 5%
3

C7036 NC/4.7uF 50V

ON OFF
Q7008 NC/BC847C

2
1

C7037 NC/22UF 6.3V

2011-12-19

System Power 2

715G5155
19230_501_120207.eps 120420

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-3 Peripheral

TPM9.1E LA

10.

EN 50

B03
MT5366
10K 1/10W 5% R4023

Peripheral
DVDD3V3 U4001A JTCK JTDI JTDO JTMS JTRST# OSDA0 OSCL0 OSDA1 OSCL1 OSDA2 OSCL2 OXTALI OXTALO AVDD33_XTAL_STB R4 T1 R3 T3 T2 J22 J23 U4 U3 T22 T23 AE19 AD19 AC18 AE18 AA7 W8 AB15 AA17 AA12 A25 B25 Y 21 Y 22 AB22 AA23 AB23 AC23 AB24 AA20 Y 20 W20 Y 19 W19 M9 H6 N9 L12 L13 L14 P9 R10 W21 AC24 AB25 M11 M12 M13 M14 M15 M16 N11 N12 N13 N14 N15 N16 P11 P12 P13 P14 P15 P16 R11 R12 R13 R14 K12 K13 M10 N10 P10 K14 K17 L17 N17 P17 W17 V19 JTCK JTDI JTDO JTMS JTRST_ OSDA0 OSCL0 OSDA1 OSCL1 OSDA2 OSCL2 XTALI XTALO AVDD33_XTAL_STB AVSS33_XTAL_STB AVDD33_VGA_STB AVSS33_VGA_STB AVDD12_PLL AVSS12_PLL AVDD10_LDO DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS VCC3IO VCC3IO VCC3IO VCC3IO VCC3IO VCC3IO T8 M18 H19 V8 U8 N18 VCCK DVDD3V3 VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK M1 M2 M3 M4 M5 M6 N1 N2 N3 N4 N5 N6 K10 K11 K9 L9 R9 K15 K16 L10 T9 T10 T11 T12 T13 T14 T15 T16 L11 L15 R15 L16 R16 R17 T17 U0TX U0RX U1RX U1TX POWE_ POOE_ POCE1_ POCE0_ PDD7 PDD6 PDD5 PDD4 PDD3 PDD2 PDD1 PDD0 PARB_ PACLE PAALE OPWRSB ORESET_ AVDD12_PLL R4104 1.3K 1% AVDD10_LDO OIRI FSRC_WR AB8 AC7 U2 U1 J19 K21 K22 J21 K23 L23 L24 L25 K20 K19 L22 M23 J20 J24 J25 AB9 Y8 AC8 E23 U0TX U0RX U1RX U1TX POWE# POOE# POCE1# POCE0# PDD7 PDD6 PDD5 PDD4 PDD3 PDD2 PDD1 PDD0 PARB# PACLE PAALE OPWRSB ORESET# RC6 FSRC_WR DVDD3V3 4K7 1/16W 5% R4028 DVDD3V3 R4024 4K7 1/16W 5% R4106 4K7 1/10W 5% R4107 4K7 1/10W 5% TP4024 TP TP4025 TP 17 OSCL2 17 OSDA2 OSCL0 OSDA0 OSDA1 OSCL1 RC6 U0TX U0RX NC NC NC NC I/O7 I/O6 I/O5 I/O4 NC NC NC VDD VSS NC NC NC I/O3 I/O2 I/O1 I/O0 NC NC NC NC 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 OPWRSB OPCTRL4 OPCTRL5 AOSDATA1 SY S_EEPROM_WP GND R4026 4K7 1/16W 5% VDD_NAND R4103 NC/4K7 1/16W 5% OSCL2 OSDA2 OSCL0 OSDA0 OSDA1 OSCL1 RC6 U0TX U0RX 14 14 7 7 5 5,6,10 5,6,10

B03

NAND Flash
DVDD3V3 4K7 1/16W 5% R4025 PARB# POOE# POCE1# 4K7 1/16W 5% VDD_NAND

U4005 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 NC NC NC NC NC NC RB R E NC NC VDD VSS NC NC CL AL W WP NC NC NC NC NC

DVDD3V3 PDD7 PDD6 PDD5 PDD4

DVDD3V3

R4027

OPWRSB 2 OPCTRL4 13 OPCTRL5 13 AOSDATA1 6 SY S_EEPROM_WP 13 2,3,5,6,7,8,9,10,11,12,13,14,15,16,17

(20mA Max.)
100N 16V C4040 100N 16V C4041

3V3SB

AVDD33_REG_STB

C4042 1UF16V PACLE PAALE POWE#

POCE0# PDD3 PDD2 PDD1 PDD0

POOE#

C4043 4.7uF 10V

K9F2G08U0B-PIB0

NAND 256MBytes

STRAPPING
R4034 R4035 R4036

3V3SB R4046 NC/10K 1/10W 5% OPCTRL5

R4047 10K 1/10W 5%

R4031

R4032

R4033

DVDD3V3 R4050 NC/10K 1/10W 5% OPCTRL4 CN4002 TVTREF#1 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 DVDD3V3 R4055 10K 1/10W 5% R4056 NC/10K 1/10W 5% AOSDATA1 R4051 10K 1/10W 5%

10K 1/16W 5%

10K 1/16W 5%

10K 1/16W 5%

10K 1/16W 5%

JTRST# JTDI JTMS JTCK JTDO R4039 33R 1/16W 5%


10K 1/16W 5% 10K 1/16W 5% R4040 R4041

10K 1/16W 5%

1K 1/16W 5%

JTAG_DBGRQ JTAG_DBGACK

NC/CONN

SYSTEM EEPROM
SY S_EEPROM_WP R4045 NC/0R05 1/10W

R4042 4K7 1/10W 5%

DVDD3V3

27MHz CRYSTAL
X4002 27MHz OXTALI 1 2 OXTALO

+5VSB 3V3SB R4030 0R05 1/10W R4029 NC/10K 1/10W 1% 3 U4007 GND Vcc RESET 1 2 ORESET#

GPIO 19
MT5366ZVGG OSCL0 OSDA0

R4043 4K7 1/10W 5%

R4102 10K 1/16W 5% Q4003 BC847C R4013 4K7 1/16W 1%

4K7 1/10W 5%

R4044

Pin7 WP HI = > Disable w rite LO = > Enable Write


U4008 8 7 6 5 VCC A0 WP A1 SCL A2 SDA VSS 1 2 3 4

3.3V IO Power
DVDD3V3

C4045 27P 50V

C4044 27P 50V

R4037 NC/39K 1/10W 1%

AZ809ANSTR-E1 R4038 100K 1/16W 5%

CAT24C128WI-GT3

(26.8mVr)

Reset IC
C4047 100N 16V C4048 100N 16V

C4046 4.7uF 10V

2nd I2C
DVDD3V3 DVDD3V3

Analog Power
3V3SB R4052 0R05 1/10W

( 10 mA )
AVDD33_XTAL_STB

3V3SB R4053 0R05 1/10W C4049 100N 16V

( 13 mA )
AVDD33_REG_STB

AVDD1V2 R4054 0R05 1/10W

( 42 mA )
AVDD12_PLL
(0mVr)

R4048 4K7 1/10W 5%

R4049 4K7 1/10W 5%

C4052 10UF 10V

C4050 100N 16V

C4051 100N 16V

OSDA1 OSCL1

Core Power
VCCK

3rd I2C
DVDD3V3 DVDD3V3 R4057 4K7 1/10W 5% C4055 100N 16V C4056 100N 16V C4057 100N 16V OSDA2 OSCL2 R4058 4K7 1/10W 5%

(11.8mVr)

+ C4053 NC/100UF 16V

C4054 10UF 10V

(11.8mVr)

C4058 100N 16V

C4059 100N 16V

C4060 100N 16V


2 2011-12-19

Peripheral

715G5155
19230_502_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-4 Connector/USB/RS232

TPM9.1E LA

10.

EN 51

B04

Connector & USB & RS232

B04
3V3SB 3V3SB R4060 3.9K1/16W

TO KEY PAD BOARD

R4059 3.9K1/16W R4063 100R 1/10W 1% 100R 1/10W 1% R4064


C4061 100N 50V

LED_G: GPIO 21 Enable: High Disable(Stand_By): Low LED_R: GPIO 202 Enable(Stand_By): High Disable: Low
3V3SB
1

LIGHT_SENSOR_IN KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE LED_R LED_G RC6 LCD_clock_SCL LCD_clock_SDA USB_PWR_EN0 USB_OC_COM USB_DP0 USB_DM0 U0TX U0RX

LIGHT_SENSOR_IN 13 KEY _UP_DN_DCSW 13 KEY _MENU_L_R_SOURCE 13 LED_R 13 LED_G 13 RC6 4 LCD_clock_SCL 13 LCD_clock_SDA 13 USB_PWR_EN0 13 USB_OC_COM 13 USB_DP0 USB_DM0 U0TX U0RX GND 11 11 4,6,10 4,6,10 2,3,4,6,7,8,9,10,11,12,13,14,15,16,17

KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE

Key 1 Key 2

C4062 100N 50V

R4061 16K 1/10W 5%

R4062 1K 1/10W
2

FB4002 600R/200mA

CN4003 1 2 3 4 5 6 7 8 9 10 11 12 CONN

LED_R LED_G RC6 R4067 100R 1/10W 5%

R4065 R4066 R4068

100R 1/10W 5% 16K 1/10W 5%


C4064 NC/10NF 50V

0R05 1/10W

C4065 100N 50V

100N 50V C4066

C4063 2.2UF 16V

3V3SB

Key 1 Key 2 +5V_SW LIGHT_SENSOR

USB_PWR_EN1 USB_OC_COM1 USB_DP1 USB_DM1

USB_PWR_EN1 13 USB_OC_COM1 13 USB_DP1 USB_DM1 11 11

R4211 NC/10K 1/16W 5%

R4212 NC/10K 1/16W 5% 3V3SB

CN4005
6

LCD_Clock_SDA LCD_Clock_SCL

NC/100R 1/10W 5% NC/100R 1/10W 5% +5VSB

R4070 R4069

1 2 3 4 5

CN4004 1 2 3 4 3V3SB 5 +5VSB NC/CONN

TO IR/KEY BOARD

NC/CONN

For LCD Clock


USB PORT 1(Down) USB PORT 2(Up)
6
1 2 3 4 5 6

IR Linked

NC/CONN CN4001 7

USB_DP0 USB_DM0

R4074 0R05 1/16W R4075 0R05 1/16W


2

4 3 2 1 FB4003 220R/2000mA

USB_DP1 USB_DM1 CN4007 USB CONN +5V_SW

R4115 NC/0R05 1/16W R4116 NC/0R05 1/16W


2

4 3 2 1 FB4006 NC/220R/2000mA

6 8 4 3 2 1

+5V_SW

C4067 100UF 16V

C4080 NC/100UF 16V

1 TH4001

1 TH4002
NC/10UF 10V C4069 C4070 NC/100N16V

PTCR

NC/PTCR
NC/10UF 10V C4085 C4083 NC/100N16V

R4076 NC/10K 1/10W 5% 5 USB_PWR_EN1 4 U4012 IN OUT GND OC

R4114 NC/10K 1/10W 5%

U4009 5 USB_PWR_EN0 4 IN EN OUT GND OC 1 2 3USB_OC_COM

GPIO 23
R4078 NC/4K7 1/16W 5%

NC/G5250M1T1U

R4077 DVDD3V3 NC/4K7 1/16W 5%

GPIO 2
R4113 NC/4K7 1/16W 5%

1 2 3USB_OC_COM1 EN R4118 DVDD3V3 NC/4K7 1/16W 5% NC/G5250M1T1U

3V3SB 3V3SB
1 2 2 1

LIGHT SENSOR
BAV99 D4005 LIGHT_SENSOR R4010 NC/100R LIGHT_SENSOR_IN

R4079 4K7 1/16W 5%

BAV99 D4001 R4080 4K7 1/16W 5%


3

U0TX U0RX

R4081 R4082100R 1/10W 5% 100R 1/10W 5%

1 2 3

CN4008 CONN

C4007 NC/10UF 10V

5 7

4 3 2 1

CN4009 NC/USB CONN

2011-12-19

Connector & USB & RS232

715G5155
19230_503_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-5 Audio I/O & Headphone

TPM9.1E LA

10.

EN 52

B05
SCART1_R_In SCART1_L_In VGA_R_In VGA_L_In

Audio I/O & Headphone


HP_DET U4001F AE25 AB21 AD25 AE22 AC25 AD22 AD23 AB20 AE24 AC21 AE23 AC20 AD24 AC22 AA19 AA21 AA18 C6008 1uF 16V AIN0_R_AADC AIN0_L_AADC AIN1_R_AADC AIN1_L_AADC AIN2_R_AADC AIN2_L_AADC AIN3_R_AADC AIN3_L_AADC AIN4_R_AADC AIN4_L_AADC AIN5_R_AADC AIN5_L_AADC AIN6_R_AADC AIN6_L_AADC AVDD33_AADC AVSS33_AADC VMID_AADC ALIN ASPDIF AOBCK AOLRCK AOMCLK AOSDATA4 AOSDATA3 AOSDATA2 AOSDATA1 AOSDATA0 MT5366ZVGG AR0_ADAC AL0_ADAC AR1_ADAC AL1_ADAC AR2_ADAC AL2_ADAC AR3_ADAC AL3_ADAC AVDD33_DAC AVDD33_DAC1 AVSS33_DAC AVSS33_DAC1 Y 23 AA25 W23 AA24 V24 Y 25 V25 Y 24 V22 V23 AA22 W22 V21 V20 T21 U24 U25 R21 R20 T19 U23 T20 AU_DIN SPDIF_OUT AOBCLK AOLRCK AOMCLK AOSDATA4 AOSDATA3 AOSDATA2 AOSDATA1 AOSDATA0 AR0O AL0O AR1O AL1O AR2O AL2O AR3O AL3O AVDD33_DAC AVDD33_DAC1 AVDD3V3 R6004 AVDD33_AADC TP6002 TP TP6003 TP HP_DET 13

B05
Analog Power
ADAC_PWR R6002 47R 1/10W 5% + C6003 100UF 16V C6002 100N 16V AVDD33_DAC R6010 0R05 1/10W C6004 100N 16V AVDD33_DAC1 Y PbPr_R_In1 Y PbPr_L_In1 VGA_R_In VGA_L_In SCART1R_PA SCART1L_PA SPDIF_OUT AOSDATA1 AOMCLK AOBCLK AOLRCK AOSDATA0 C6006 100N 16V HP_SC_MUTE SP_AMP_MUTE OFF_MUTE Y PbPr_R_In1 Y PbPr_L_In1 VGA_R_In VGA_L_In 8 8 10 10 SPDIF_OUT SCART1_R_In SCART1_L_In SPDIF_OUT 8,14 SCART1_R_In 9 SCART1_L_In 9

MT5366

Y PbPr_R_In1 Y PbPr_L_In1

SCART1R_PA 9 SCART1L_PA 9 SPDIF_OUT 8,14 AOSDATA1 4 AOMCLK 7 AOBCLK 7 AOLRCK 7 AOSDATA0 7 HP_SC_MUTE 9 SP_AMP_MUTE 13 OFF_MUTE 7,9 GND 2,3,4,5,7,8,9,10,11,12,13,14,15,16,17

AVDD33_AADC

VMID_AADC C6007 100N 50V

0R05 1/10W TP6004 TP

TP6001 TP TP6005 TP TP6006 TP U0TX U0RX AL0O AR0O HP_MUTE

U0TX U0RX AL0O AR0O HP_MUTE

4,5,10 4,5,10 7 7 7

HPOUTR HPOUTL

HPOUTR HPOUTL

7 7

3V3SB

+5V_SW

3V3SB DVDD3V3

R6034 10K 1/16W 5% HP_MUTE

R6029 NC/4K7 1/16W 5% R6030 OFF_MUTE D6002 BAS316 SP_AMP_MUTE R6072 10K 1/16W 5% R6003 NC/4K7 1/16W 5% HP_DET
C6005 NC/10N 50V

HPOUTR

CONN

4K7 1/16W 5% R6033 Q6002 BC847C HP_SC_MUTE

HPOUTL C6033 100N 50V

Earphone R/L output

2 1 CN6003 C6035 100N 50V

+5V_SW

+5V_SW

4K7 1/16W 5%

GPIO 15
R6018 NC/0R05 1/16W

R6047 NC/10K 1/16W 5% G0

R6048 NC/10K 1/16W 5% G1 R6050 NC/0R05 1/16W

R6028

HPOUTL FB6003 1 2 +5V_SW NC/120R/3000mA

NC/10R 1/10W 5% Bathroom_PWR

R6049 NC/0R05 1/16W

C6021 NC/10UF 10V HP_MUTE

SCT Audio Out


R6006 30K OHM +-1% 1/16W C6009 10UF 10V R6009 47K 1/16W 5% 0R05 1/16W R6012 NC/100K 1% C6012 330PF 50V R6013 OPAVREF_R
4 3 2 1

U6004 R6031 NC/1.2K 1/16W 1% R6032 NC/1.2K 1/16W 1% LEFT_1W C6025 NC/2N2 50V C6023 1 NC/1UF16V 2 NC/1UF16V 3 NC/1UF16V 4 C6034 NC/1UF16V C6036 C6029

AR2O
Thermal Pad OUTL SGND AVDD EN

R6007 16K 1%

33P 50V C6010

17

16

15

14

13

SCART1R_PA OPAV120 R6015 4K7 1/16W 5% R6005 100K 1/16W 5% SMD/0402 20K OHM 1/16W 1% R6011 R6014 20K OHM 1/16W 1%

C6026 12 NC/2.2U10V CPP 11 10 9 C6028 NC/1UF16V

AL0O

INLINL+

HPVDD

C6024 R6079 NC/2N2 50V NC/0R05 1/16W

NC/0R05 1/16W R6080 AR0O R6039 NC/1.2K 1/16W 1%

INR+
HPVSS

PGND
OUTR

G0

G1

C6030 NC/2N2 50V R6040

C6027 NC/2N2 50V RIGHT_1W

INR-

NJM4580M-TE1 U6003

2IN+ VCC2IN- 1IN+ 2OUT 1INVCC+1OUT

OPAVREF_L OPAVREF_R

CPN

NC/1.2K 1/16W 1%

OPAV120

NC/TPA6132A2RTER C6039
G0 G1

R6017 0R05 1/16W OPAVREF_L AL2O R6019 16K 1% R6024 NC/100K 1% C6016 10UF 10V R6021 47K 1/16W 5% 33P 50V C6017 C6018 330PF 50V 30K OHM +-1% 1/16W R6022 SCART1L_PA

SMD/0402 R6016 100K 1/16W 5%

NC/2.2U10V

5 6 7 8

R6023 4K7 1/16W 5%

R6051

NC/10R 1/10W 5% HPOUTR

+12V

PWR_16V_24V

+12V LDO for audio


PWR_16V_24V OPAV120

R7047 NC/0R05 4A 1/4W OPAV120

2 W Mono Speaker output for Hotel TV


1

2W_POWER AL1O R6036 R6035 NC/1.2K 1/16W 1% NC/1.2K 1/16W 1% Bath_L C6079 NC/2N2 50V C6082 NC/1uF 16V 8 6 4 2

NC/CONN 7 5 3 1 CN6005 +5VSB U0TX U0RX FB6007 120R/3000mA


2 2

FB6008 NC/120R/3000mA

+12V
FB6002 NC/120R/3000mA 1

U6001 L78L12ABUTR 3 IN OUT 1

C6031 NC/2N2 50V R6045 NC/1.2K 1/16W 1%

2W_POWER

GND

C6022 4.7uF 50V

C6020 100N 50V

AR1O

R6046 NC/1.2K 1/16W 1% Bath_R C6078 NC/2N2 50V C6076 NC/1uF 16V

C6077 NC/2N2 50V C6014 10UF 25V C6015 1UF 25V

2011-12-19

Audio I/O & Headphone

715G5155
19230_504_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-6 Speaker

TPM9.1E LA

10.

EN 53

B06
DVDD3V3 FB6005 1

Speaker
AL0O AR0O OSDA1 OSCL1 OFF_MUTE AMP_MUTE I2SAMP_RESET AOMCLK AOBCLK AOLRCK AOSDATA0 AL0O AR0O 6 6 OSDA1 4 OSCL1 4 OFF_MUTE 6,9 AMP_MUTE 13 I2SAMP_RESET 13 AOMCLK 6 AOBCLK 6 AOLRCK 6 AOSDATA0 6 GND 2,3,4,5,6,8,9,10,11,12,13,14,15,16,17

B06

AVDD FB6004220R/2000mA AVDD DVDD3V3 FB6009 1 C6041 4.7UF 10V 2 120R/600mA C6044 4.7UF 10V + C6042 100UF 35V AVDD_HP PWR_16V_24V 1 2 FB6006 220R/2000mA 1 2 + AUD_VCC I2SAMP_RESET C6043 100UF 35V R6082 100R 1/16W 5% C6001 1uF 25V AUD_VCC R6078 NC/4K7 1/10W 5% AMP_RESET

2 120R/600mA

HP_MUTE HPOUTR HPOUTL

HP_MUTE HPOUTR HPOUTL

6 6 6

R6054 AL0O R6053 16K 1% C6038 1UF 10V C6037 330PF 50V R6055 18Kohm 1/16W +/-1% R6092 HP_L 10R 1/16W 5% C6048 1UF 10V C6040 330PF 50V AOSDATA0 R6056 18Kohm 1/16W +/-1% R6091 HPOUTR 10R 1/16W 5% HP_MUTE AVDD_HP
C6073 NC/1UF 10V

43K 1/16W AOMCLK C6059 68P 50V AOBCLK R6060 0R05 1/16W AOLRCK R6061 0R05 1/16W R6064 0R05 1/16W R6058 0R05 1/16W C6098 33P 50V BICKI C6099 33P 50V LRCLKI C6100 33P 50V SDI C6101 33P 50V 68P 50V MCLK

Mute CKT
3V3SB

DVDD3V3

AMP_MUTE: NORMAL: Low MUTE: High

R6068 10K 1/16W 5% R6069 10K 1/16W 5% R6070 AMP_MUTE NC/22K 1/16W 5% R6062 0R05 1/16W Q6003 BC847BW PWRDN

HPOUTL AR0O 16K 1% R6026

R6027 43K 1/16W

+12V

+5VSB

C6032

R6073 NC/0R05 1/10W

R6074 0R05 1/10W D6004 1 2 A K


2

R6071 4K7 1/16W 5%

BAS316 1
C6072 NC/1UF 10V

C6085 220UF 16V

HP_L

C6061 1UF 10V C6063 1UF 10V


24 23 22

HP_MUTE

C6064 NC/1UF 10V

100N 16V

C6062 1UF 10V

K A D6005 BAS316

R6076 1 1K 1/16W 5% R6077 100K 1/16W 5%

C6060

R6075 4K7 1/16W 5%

BC857BW Q6001

A K

D6003 BAS316 D6001 A K BAS316 2 OFF_MUTE

Anti-Pop CKT
19 18 20 LINEHPOUT_L 17 16 15 LINEINL GNDA F3XR F3XL 14 LINEHPOUT_R F3X_FILT LINEINR 13

U6002

CPVSS

VDD3V3

SOFTMUTE

CPM

21

C6070 NC/100N 50V 12 C6069 100N 50V 11 10 9 C6019 100N 50V 8 7 6 AUD_VCC 5 C6049 100N 50V 4 3 2 C6080 100N 50V 1 C6083 100N 50V
6.2R

25 26 AVDD_HP 27 AVDD C6074 100N 16V 28 C6065 100N 16V 29 30 31 32 33 C6066 34 2.2U10V 35 MCLK 36

GNDPSUB CPP VDD3V3CHP VDDIG1 GNDDIG1 FFX3A FFX3B EAPD/FFX4A TWARNEXT/FFX4B VREGFILT AGNDPLL

GND_REG VDD_REG OUT1A GND1 VCC1 OUT1B

C6090 100N 50V L6001 47UH C6089 100N 50V

AUD_VCC
R6100

6.2R

C6068 1UF 50V AUD_VCC C6055 330PF 50V

R6085 22 OHM 1/4W


C6051 220N 50V

NC/3.4K 1%

R6089

LSPK+ AUD_VCC
NC/3.4K 1% R6090

R6095

STA381BWTR

NC/3.4K 1%

C6053 NC/330PF 50V L6002 47UH

C6011 NC/220N 50V

AUD_VCC NC/150UF 25V C6103


+

LSPKNC/4.7uF 25V C6110

C6087 1N 50V C6107 NC/10N 50V

OUT2A VCC2 GND2 OUT2B VSS_REG


TESTMODE

C6109 NC/4.7uF 25V

C6104 NC/150UF 25V RSPK+ NC/150UF 25V C6106


+

C6071 R6087 NC/22 OHM 1/4W NC/330PF 50V C6102 L6003 47UH WSPK+
R6096

1UF 50V

C6086 100N 50V C6052


R6099 6.2R

NC/3.4K 1%

NC/4.7uF 25V C6111 C6088 1N 50V


+

C6084 100N 50V

NC/220N 50V

AUD_VCC

C6112 NC/4.7uF 25V

RSPK-

C6105 NC/150UF 25V

GNDDIG2

VDDDIG2

MCLK
INTLINE RESET PWDN LRCKI BICKI SDA SCL

VCC_REG
E-Pad

R6086 22 OHM 1/4W

1N 50V C6108 NC/10N 50V

C6081 100N 50V 330PF 50V C6054 L6004 47UH

R6098

1 2 3 CONN CN6002 WSPK5

SDI

SA

LR SPK for 2.1


LSPK+ LSPKRSPK+ RSPK4 3 2 1

4 C6050 220N 50V C6057

40

37

38

39

41

42

43

44

45

46

47

48

49

LRCLKI

100R 1/16W 5%

R6093 100R 1/16W 5%

BICKI

C6067
R6094

SDI

1N 50V

AVDD 100N 16V C6075 100N 50V


R6097 6.2R

CN6004 CONN

AMP_RESET

I2S Input

PWRDN

WOOFER for 2.1

OSDA1

OSCL1

C6056 100N 50V

R for 2.0

L for 2.0

I2C

C6058

2011-12-19

Speaker

715G5155
19230_505_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-7 Video I/O & SPDIF

TPM9.1E LA

10.

EN 54

B07

Video I/O & SPDIF

B07
HSY NC VSY NC RP GP BP COM SOG VGA_SDA VGA_SCL COM1 PB1P PR1P Y 1P SOY 1 COM0 PB0P PR0P Y 0P SOY 0 AVDD12_RGB AVSS12_RGB FS_VDAC VDAC_OUT1 VDAC_OUT2 AVDD33_VDAC AVSS33_VDAC W12 W11 AC10 AC9 AD9 AB10 AE9 AC11 AB12 AE11 AD12 AE12 AD11 AB11 AC13 AB14 AC14 AB13 AC12 AD14 Y 14 AA15 W13 Y 12 AA14 W15 HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL COM1 PB1P PR1P Y 1P SOY 1 COM0 PB0P PR0P Y 0P SOY 0 AVDD12_RGB +5V_SW R1008 NC/10K 1/10W 5% R1009 RF_AGC_H 10K 1/10W 5% C1008 47N 50V

MT5366

U4001C TU_FAT_IN2TU_FAT_IN2+ AVDD33_DEMOD AVDD33_IFPGA AD17 AE17 AC19 AB19 Y 18 AB18 Y 16 R19 P23 AD20 AE20 AD15 AC15 AE15 AB16 AC16 AC17 AB17 Y 15 W14 W16 ADCINP_DEMOD ADCINN_DEMOD AVDD33_DEMOD AVDD33_IFPGA AVSS33_DEMOD AVDD12_DEMOD AVSS12_DEMOD IF_AGC RF_AGC LOUTN LOUTP SC0 SC1 SY 0 SY 1 CVBS2P CVBS1P CVBS0P CVBS_COM AVDD33_CVBS AVSS33_CVBS MT5366ZVGG

Analog Power
AVDD1V2 R1002 0R05 1/10W AVDD12_RGB C1002 100N 16V AVDD3V3 R1003 0R05 1/10W C1003 100N 16V AVDD33_CVBS R1004 0R05 1/10W C1004 100N 16V AVDD3V3 AVDD33_VDAC AVDD3V3 R1005 0R05 1/10W C1005 100N 16V

DVBT Only
( 9.5 mA )
AVDD33_DEMOD SPDIF_OUT 5135_REFCLKM 5135_REFCLKP 5135_REFCLKM 15 5135_REFCLKP 15 SPDIF_OUT 6,14

AVDD12_DEMOD

OFF_MUTE HP_SC_MUTE TUNER_BY PASS_OUT

OFF_MUTE

6,7,9

( 20 mA )
R1006 0R05 1/10W AVDD33_IFPGA C1006 100N 16V

IF_AGC RF_AGC 5135_REFCLKM 5135_REFCLKP

HP_SC_MUTE 6,9 TUNER_BY PASS_OUT 9

AVDD1V2 R1007 0R05 1/10W

( 37 mA )
AVDD12_DEMOD

Y PbPr_R_In1 Y PbPr_L_In1 SOY 0 Y 0P COM0 PB0P PR0P CVBS2P HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL

Y PbPr_R_In1 Y PbPr_L_In1 SOY 0 Y 0P COM0 PB0P PR0P CVBS2P HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL GND

6 6 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 2,3,4,5,6,7,9,10,11,12,13,14,15,16,17

CVBS2P CVBS1P CVBS_COM AVDD33_CVBS

VDAC_FS TUNER_BY PASS_OUT TP1002 AVDD33_VDAC

560R 1/10W 1% R1010

RF_AGC

C1007 100N 16V

YPbPr & Audio IN


Y _IN_1 PB_IN_1 PR_IN_1

<G/BL/R/W/R>
2 1 4 3 6 5 8 7 10 9 12 11 Y PbPrL_IN Y PbPrR_IN

CVBS in share with Y

16 TU_FAT_IN2+ 16 TU_FAT_IN216 IF_AGC

TU_FAT_IN2+ TU_FAT_IN2IF_AGC RF_AGC_H

16 RF_AGC_H

R1013 SPDIF Side_CVBS

C1010 CVBS1P

B C

100R 1/16W 5% 47nF 16V

CN1002 RCA JACK C1013 CVBS_COM 1UF16V

YPBPR IN
C1001 1.5nF 50V Side_CVBS R1001 0R05 1/16W C1014 10N 50V Y _IN_1 R1018 18 OHM +-5% 1/16W R1021
56R 1/16W 1%

SOY 1 Y 1P R1019 100R 1/16W 5% C1018 47pF 50V R1022 0R05 1/16W R1023 100R 1/16W 5% C1022 10N 50V R1042 C1199 33P 50V
100R 1/10W 5%

SPDIF OUT
C1198 100N 16V SPDIF_OUT 240R 1/10W 5%

C1019 10N 50V COM1

R1043 SPDIF

PB_IN_1

R1028 18 OHM +-5% 1/16W R1034


56R 1/16W 1%

PB1P R1029 100R 1/16W 5%

C1027 47pF 50V

R1037 R1038 18 OHM +-5% 1/16W PR_IN_1

56R 1/16W 1%

C1028 47pF 50V C1029 10N 50V PR1P R1040 100R 1/16W 5%

AUDIO IN for YPbPr

C1036 10UF 10V Y PbPrR_IN

R1050 Y PbPr_R_In1

30KOHM 1/16W +/-5% C1190 NC/10NF 50V

C1037 10UF 10V R1051 Y PbPrL_IN C1191 NC/10NF 50V


2 2011-12-19

Y PbPr_L_In1 30KOHM 1/16W +/-5%

Video I/O & SPDIF

715G5155
19230_506_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-8 Scart

TPM9.1E LA

10.

EN 55

B08

SCART
SCART1R_PA SCART1L_PA CVBS2P SOY 0 Y 0P COM0 PB0P PR0P SCART_FS0 TUNER_BY PASS_OUT SCART1_R_In SCART1_L_In OFF_MUTE HP_SC_MUTE 1 SCT1_AUR_IN 2 3 4 5 SCT1_AUL_IN SCT1_FS_IN 6 7 8 9 10 11 12 13 14 15 SCT1_FB_IN SCT1_AV1_GND SCT1_AV_IN 16 17 18 19 20 21 CN1005 SCART CONN 21P SCT1_AV_OUT SCT1_AVO_GND SCT1_R_IN SCT1_G_IN SCT1_B_IN SCT1_AUL_OUT SCT1_AUR_OUT SCART1R_PA 6 SCART1L_PA 6 CVBS2P 8 SOY 0 8 Y 0P 8 COM0 8 PB0P 8 PR0P 8 SCART_FS0 13 TUNER_BY PASS_OUT 8 SCART1_R_In 6 SCART1_L_In 6 OFF_MUTE 6,7 HP_SC_MUTE 6 GND 2,3,4,5,6,7,8,10,11,12,13,14,15,16,17

B08

SCART (Full SCART) -- CVBS+SV+RGB+TV OUT

CVBS IN
SCT1_AV_IN
75 OHM +-5% 1/16W

23

22

CVBS OUT
R1063 R1062 0R05 1/16W C1047
47pF 50V

FAST BLANKING/SOY
R1065 L1003 1U8 10% 0R05 1/16W SMD/0402 SCT1_AV_OUT SCT1_FB_IN R1064 0R05 1/10W R1068 75R 1/10W 1% SOY 0

C1044 CVBS2P TUNER_BY PASS_OUT

100R 1/16W 5% 47nF 16V R1067 75 OHM +-5% 1/16W SMD/0402

R1066

C1048 C1045 C1046 47pF 50V 47pF 50V NC/47pF 50V SMD/0402 SMD/0402

RGB IN
SCT1_B_IN R1071 1 FB1005 80R 2 R1070 0R05 1/16W R1074 75 OHM +-5% 1/16W R1075 0R05 1/16W 68R 1/16W 5% C1051 15PF50V C1052 R1076 10N 50V 100R 1/16W 5% COM0 10N 50V C1050 Y 0P

Audio Output
C1073 R1053 330R 1/16W 5%
NC/10N 50V C1040

Function Select
SCT1_FS_IN SCT1_AUR_OUT R1069 51K 1/16W 5%
R1073 NC/VPORT0603100KV05 10K 1/16W 5%

SCART_FS0

SCART1R_PA

10UF 10V

R1055 47K 1/16W 5%

SCT1_G_IN

1 FB1006 80R

2 R1078 0R05 1/16W R1080 75 OHM +-5% 1/16W

R1079 68R 1/16W 5%

C1054 10N 50V

PB0P

OFF_MUTE

R1054 0R05 1/16W R1056 0R05 1/16W

R1 Q1006

C1055 15PF50V

HP_SC_MUTE

DTC623TK

FB1007 80R SCT1_R_IN 1

R1082 2 0R05 1/16W

C1056 R1081 75 OHM +-5% 1/16W 15PF50V R1083 68R 1/16W 5%

C1057 10N 50V PR0P SCART1L_PA C1110 R1058


NC/10N 50V C1043

SCT1_AUL_OUT ZD1027 R1059 47K 1/16W 5%


2 1

330R 1/16W 5% 10UF 10V

Audio Input
OFF_MUTE R1060 0R05 1/16W 2 R1 SCT1_AUR_IN
NC/10NF 50V C1192

C1049

10UF 10V R1072 30Kohm 1/16W +/-5%

SCART1_R_In

HP_SC_MUTE R1061 0R05 1/16W

Q1008 DTC623TK
1

SCT1_AUL_IN
NC/10NF 50V C1193

C1053

10UF 10V R1077 30Kohm 1/16W +/-5%

SCART1_L_In

2011-12-19

SCART

715G5155
19230_507_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-9 VGA Input

TPM9.1E LA

10.

EN 56

B09

VGA Input

B09
VGA_UR_EN U0TX U0RX OSCL0 OSDA0 VGA_R_In VGA_L_In HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL EDID_WEN VGA_UR_EN U0TX U0RX OSCL0 OSDA0 VGA_R_In VGA_L_In HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL EDID_WEN GND 13 4,5,6 4,5,6 4,14 4,14 6 6 8 8 8 8 8 8 8 8 8 13,14 2,3,4,5,6,7,8,9,11,12,13,14,15,16,17

VGA Input

17

+5V_SW 1 6 2 7 3 8 4 9 5 10 RED RED_GND GRN GRN_GND BLU BLU_GND VGA_TX

C1058 1.5nF 50V SOG R1084 0R05 1/16W C1059 10N 50V GRN GP
75 OHM +-5% 1/16W

VGA_RX VGASDA_IN HSY NC# VSY NC# VGASCL_IN

11 12 13 14 15

R1085 100R 1/16W 5% C1060 47pF 50V R1087 0R05 1/16W C1061 10N 50V VGACOM R1088 100R 1/16W 5%

D1009 BAS316

D1008 BAS316 VGA_PLUGPWR GRN_GND R1086

16

CN1001 D-SUB 15P

+5V_SW
75 OHM +-5% 1/16W

C1062 10N 50V

DVDD3V3 R1210 4K7 1/10W 5% R1211 10K 1/10W 5% 100R 1/10W 5% VGA_UR_EN R1209 Q1153 BC847C R1234 NC/0R05 1/16W

VGA IN

BLU R1089 100R 1/16W 5% C1063 47pF 50V

BP

R1090 BLU_GND

GPIO 12

GPIO12 : L VGA_Tx/Rx ON GPIO12 : H VGA_Tx/Rx OFF


2N7002 Q1012 VGA_RX 2N7002 Q1105 U0RX VGA_TX 2N7002 Q1013 2N7002 Q1104 U0TX

C1064 10N 50V RED


75 OHM +-5% 1/16W

RP R1091 100R 1/16W 5% C1065 47pF 50V

10UF 10V C1197

10K 1/16W 5% R1229 RED_GND

R1092

R1165 NC/100R 1/16W 5%

R1167 NC/100R 1/16W 5%

VGA Audio Input


CN1006 1 2

VGA SYNC SLICER


HSY NC# VGA_AudioRIN
2

VGA EDID
VGA_PLUGPWR HSY NC VGA_PLUGPWR

R1094 0R05 1/16W ZD1100 NC/UDZSNP5.6B

C1067 NC/5PF 50V

C1070 100N 16V U1004 1 2 3 4 E0 VCC E1 WC E2 SCL VSS SDA 8 7 6 5

R1100 10K 1/10W 5%

3 PHONE JACK

VGA_AudioLIN

VSY NC#
2

R1097 0R05 1/16W ZD1101 NC/UDZSNP5.6B


1

VSY NC

VGASCL_24C02 VGASDA_24C02

M24C02-WDW6P C1069 NC/5PF 50V R1102 EDID_WEN Q1009 BC847C 10K 1/16W 5%

GPIO 27

FB1011 600R/200mA VGA_AudioRIN 1 2 R1093 C1066 30Kohm 1/16W +/-5% 10UF 10V VGA_R_In

VGA I2C
VGA_PLUGPWR

VGA AUDIO
FB1013 600R/200mA VGA_AudioLIN 1 2 R1096 30Kohm 1/16W +/-5% C1068 10UF 10V VGA_L_In R1101 VGASCL_IN 100R 1/16W 5% 0R05 1/16W R1205 R1099 10K 1/16W 5% VGASCL 0R05 1/16W R1206 VGASCL_24C02

VGA_PLUGPWR

R1103 10K 1/16W 5% R1104 VGASDA_IN 100R 1/16W 5%

R1207 VGASDA 0R05 1/16W R1208 VGASDA_24C02 0R05 1/16W


2 2011-12-19

VGA Input

715G5155
19230_508_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-10 LVDS

TPM9.1E LA

10.

EN 57

B10

LVDS
USB_PWR_EN0 USB_OC_COM USB_DP0 USB_DM0 LVDS_CTRL BRIGHT_ADJ INVERTER_ON_OFF BL_DIMMING BL_ON/OFF USB_PWR_EN0 5,13 USB_OC_COM 5,13 USB_DP0 5 USB_DM0 5 LVDS_CTRL 13 BRIGHT_ADJ 2 INVERTER_ON_OFF 2 BL_DIMMING 13 BL_ON/OFF 13

B10

MT5366
U4001D AVDD33_USB_2P AB1 V7 AC3 USB_DP0 USB_DM0 USB_DP1 USB_DM1 AB2 AC1 AC2 AD1 AVDD33_USB_2P AVSS33_USB_2P USB_2P_VRT USB_2P_DP0 USB_2P_DM0 USB_2P_DP1 USB_2P_DM1 AVDD33_LVDSA AVDD33_LVDSA AVSS33_LVDSA AVSS33_LVDSA AVDD12_VPLL AVSS12_VPLL TP_VPLL AE0P AE0N AE1P AE1N AE2P AE2N AECKP AECKN AE3P AE3N AE4P AE4N AE5P AE5N AO0P AO0N AO1P AO1N AO2P AO2N AOCKP AOCKN AO3P AO3N AO4P AO4N AO5P AO5N E18 E19 E16 E17 F19 G19 A24 D17 C17 C19 D19 D20 C20 C21 D21 D23 C23 C24 D24 D25 C25 A17 B17 A18 B18 A19 B19 A20 B20 A21 B21 A22 B22 A23 B23 AVDD12_VPLL AVDD33_LVDSTX
5K1 1/16W 5%

USB_VRT

GND

2,3,4,5,6,7,8,9,10,12,13,14,15,16,17

R4083

Panel_OPC VPLL_TP TX_AE0P TX_AE0N TX_AE1P TX_AE1N TX_AE2P TX_AE2N TX_AECKP TX_AECKN TX_AE3P TX_AE3N TX_AE4P TX_AE4N TP4003 TP USB_DP1 USB_DM1

Panel_OPC

13

USB_DP1 USB_DM1

5 5

LVDS OUTPUT
Panel_Power PANEL_VCC FB4004 120R/3000mA 1 2 FB4005 120R/3000mA 2

DVDD3V3

10K OHM +-5% 1/8W R4097

TX_AO0P TX_AO0N TX_AO1P TX_AO1N TX_AO2P TX_AO2N TX_AOCKP TX_AOCKN TX_AO3P TX_AO3N TX_AO4P TX_AO4N

NC/CONN Panel_Power 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 CN4012


(63mVr)

DVDD3V3

MT5366ZVGG

C4078 10UF 25V

R4110 NC/1K 1/16W 5% LVDS_Select 0N 0P 1N 1P 2N 2P K1N K1P 3N 3P R4112 NC/0R05 1/16W BRIGHT_ADJ OPC_IN R4108 Panel_OPC NC/1K 1/16W 5% R4109 0R05 1/16W

R4098 NC/1K 1/16W 5% R4099 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

41

CN4010 1 (63mVr) 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 CONN

GPIO 14

Analog Power
AVDD3V3 R4091 0R05 1/10W AVDD3V3 R4094 0R05 1/10W C4075 100N 16V AVDD1V2 R4096 0R05 1/10W C4076 NC/100N 16V AVDD33_USB_2P C4072 NC/100N 16V C4073 100N 16V AVDD33_LVDSTX

LVDS_CTRL NC/1K 1/16W 5% R4101 NC/0R05 1/16W

LVDS_Select TX_AO0N TX_AO1N TX_AO2N TX_AOCKN TX_AO3N TX_AO4N TX_AE0N TX_AE1N TX_AE2N TX_AECKN TX_AE3N TX_AE4N

0N 1N 2N K1N 3N

0P 1P 2P K1P 3P

TX_AO0P TX_AO1P TX_AO2P TX_AOCKP TX_AO3P TX_AO4P TX_AE0P TX_AE1P TX_AE2P TX_AECKP TX_AE3P TX_AE4P

AVDD12_VPLL

C4077 100N 16V

42

FOR WXGA PANEL


BRIGHT ADJUST
BL_DIMMING(PWM for BRIGHT_ADJ): Max: 0V Min: +3V3
BL_DIMMING

FOR FULL HD PANEL

DVDD3V3

+5V_SW DVDD3V3

BRIGHT_ADJ
R4085 NC/4K7 1/16W 5% R4084 NC/4K7 1/16W 5%
3

R4086 1K 1/10W

R 100R 5K6

C N/C 10U

R4087

OPC_IN

R4111

BRIGHT_ADJ

PWM DC

R4088 1

100R 1/10W 5% Q4002 PMBT3904 C4071 NC/10UF 10V

0R05 1/16W

INVERTER ON/OFF +5V_SW


BL_ON/OFF: Inverter on: Low Inverter off: High
R4092 4K7 1/16W 5%

+5V_SW DVDD3V3 3V3SB R4089 2KOHM 1/10W R4093 NC/4K7 1/16W 5% R4095 R4090 NC/1K 1/10W 5%

GPIO_87

4K7 1/16W 5%

INVERTER _ON_OFF

RA N/C

RB 1K

RA
1
3

RB
Q4001 PMBT3904
2

INVERTER_ON_OFF

3V3 5V

BL_ON/OFF

GPIO_25

4K7 1/16W 5% R4100 NC/4K7 1/16W 5%

C4074 NC/10UF 10V

2K

N/C

2011-12-19

LVDS

715G5155
19230_509_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-11 DDR3 Interface

TPM9.1E LA

10.

EN 58

B11

DDR3 Interface

B11
DDR3#1
U4002 E3 F7 F2 F8 H3 H8 G2 H7 D7 C3 C8 C2 A7 A2 B8 A3 C7 B7 F3 G3 D3 E7 T2 ZQ1 L8 DQL0 DQL1 DQL2 DQL3 DQL4 DQL5 DQL6 DQL7 DQU0 DQU1 DQU2 DQU3 DQU4 DQU5 DQU6 DQU7 UDQS UDQS# LDQS LDQS# UDM LDM RESET# ZQ A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC# NC NC_0 NC_1 NC_2 NC_3 NC_4 NC_6 BA0 BA1 BA2 CK CK# CS# CAS# ODT RAS# WE# CKE VSSQ_0 VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSS_0 VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9 VSS_10 VSS_11 N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3 J1 J9 L1 L9 M7 T7 M2 N8 M3 J7 K7 L2 K3 K1 J3 L3 K9 B1 B9 D1 D8 E2 E8 F9 G1 G9 A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9 B_BA0 B_BA1 B_BA2 CLK0 CLK0# B_CS# B_CAS# B_ODT B_RAS# B_WE# B_CKE B_A0 B_A1 B_A2 B_A3 B_A4 B_A5 B_A6 B_A7 B_A8 B_A9 B_A10 B_A11 B_A12 B_A13

MT5366
U4001B RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15 RDQ16 RDQ17 RDQ18 RDQ19 RDQ20 RDQ21 RDQ22 RDQ23 RDQ24 RDQ25 RDQ26 RDQ27 RDQ28 RDQ29 RDQ30 RDQ31 RDQS0 RDQS0# RDQS1 RDQS1# RDQS2 RDQS2# RDQS3 RDQS3# RDQM0 RDQM1 RDQM2 RDQM3 RCLK0 RCLK0# RCLK1 RCLK1# 1_RST# AVDD12_MEMPLL MEMTP MEMTN D13 D12 E13 D11 D14 E12 E14 E11 B10 B15 A10 A15 C11 C15 C10 C14 G5 J5 H5 J4 H4 K4 G4 K3 J1 D2 J2 C1 H3 D1 J3 E2 B13 A13 A12 B12 F2 F1 G1 G2 C12 C13 G3 E1 A9 B9 K1 K2 C6 H9 H10 D8 C8 RDQ6//RDQ0 RCAS_//RA0 RDQ0//RDQ1 RA6//RA1 RDQ1//RDQ2 RBA0//RA2 RDQ7//RDQ3 RA5//RA3 RDQ4//RDQ4 RA4//RA4 RDQ5//RDQ5 RBA1//RA5 RDQ3//RDQ6 RA13//RA6 RDQ2//RDQ7 RA10//RA7 RDQ13//RDQ8 NC//RA8 RDQ11//RDQ9 RA3//RA9 RDQ10//RDQ10 RA12//RA10 RDQ12//RDQ11 RA11//RA11 RDQ15//RDQ12 RA0//RA12 RDQ9//RDQ13 RA1//RA13 RDQ8//RDQ14 RDQ14//RDQ15 RCKE//RWE_ RDQ22//RDQ16 RODT//RODT RDQ23//RDQ17 RRAS_//RCAS_ RDQ17//RDQ18 RWE_//RCS_ RDQ16//RDQ19 RCS_//RRAS_ RDQ20//RDQ20 RA9//RCKE RDQ21//RDQ21 RDQ19//RDQ22 RA8//RBA0 RDQ18//RDQ23 RA2//RBA1 RDQ26//RDQ24 RA7//RBA2 RDQ27//RDQ25 RDQ29//RDQ26 RVREF RDQ28//RDQ27 RDQ31//RDQ28 RDQ25//RDQ29 VCC2IO RDQ24//RDQ30 VCC2IO RDQ30//RDQ31 VCC2IO VCC2IO RDQS0//RDQS0 VCC2IO RDQS0_//RDQS0_ VCC2IO VCC2IO RDQS1//RDQS1 VCC2IO RDQS1_//RDQS1_ VCC2IO VCC2IO RDQS2//RDQS2 VCC2IO RDQS2_//RDQS2_ VCC2IO VCC2IO RDQS3//RDQS3 VCC2IO RDQS3_//RDQS3_ VCC2IO VCC2IO RDQM0//RDQM0 VCC2IO RDQM1//RDQM1 VCC2IO RDQM2//RDQM2 VCC2IO RDQM3//RDQM3 VCC2IO VCC2IO RCLK0//RCLK0 VCC2IO RCLK0_//RCLK0_ VCC2IO VCC2IO RCLK1//RCLK1 RCLK1_//RCLK1_ DVSS DVSS RBA2//RRESET_ DVSS DVSS AVDD12_MEMPLL DVSS AVSS12_MEMPLL DVSS DVSS MEMTP DVSS MEMTN DVSS DVSS DVSS DVSS DVSS DVSS C4 F9 C5 A7 F8 D5 D7 A6 E6 B7 E8 F7 D6 B6 B4 A3 B3 A4 A2 D9 E7 E9 C7 E3 C16 B16 A16 F15 E15 D15 H14 H13 C2 D3 K8 J8 H8 B1 F6 E5 D4 C3 B2 A1 E4 F5 G6 F14 L3 L4 L5 L6 K6 C9 F11 F12 E10 J6 F10 H11 K7 H12 1_A0 1_A1 1_A2 1_A3 1_A4 1_A5 1_A6 1_A7 1_A8 1_A9 1_A10 1_A11 1_A12 1_A13 1_WE# 1_ODT 1_CAS# 1_CS# 1_RAS# 1_CKE 1_BA0 1_BA1 1_BA2 RVREF5 DDRV

DDR3#2
RDQ16 RDQ17 RDQ18 RDQ19 RDQ20 RDQ21 RDQ22 RDQ23 RDQ24 RDQ25 RDQ26 RDQ27 RDQ28 RDQ29 RDQ30 RDQ31 RDQS3 RDQS3# RDQS2 RDQS2# RDQM3 RDQM2 A_RST#
240 OHM +-5% 1/16W R4121

U4003 E3 F7 F2 F8 H3 H8 G2 H7 D7 C3 C8 C2 A7 A2 B8 A3 C7 B7 F3 G3 D3 E7 T2 L8 DQL0 DQL1 DQL2 DQL3 DQL4 DQL5 DQL6 DQL7 DQU0 DQU1 DQU2 DQU3 DQU4 DQU5 DQU6 DQU7 UDQS UDQS# LDQS LDQS# UDM LDM RESET# ZQ A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC# NC NC_0 NC_1 NC_2 NC_3 NC_4 NC_6 BA0 BA1 BA2 CK CK# CS# CAS# ODT RAS# WE# CKE VSSQ_0 VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSS_0 VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9 VSS_10 VSS_11 N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3 J1 J9 L1 L9 M7 T7 M2 N8 M3 J7 K7 L2 K3 K1 J3 L3 K9 B1 B9 D1 D8 E2 E8 F9 G1 G9 A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9 A_BA0 A_BA1 A_BA2 CLK1 CLK1# A_CS# A_CAS# A_ODT A_RAS# A_WE# A_CKE A_A0 A_A1 A_A2 A_A3 A_A4 A_A5 A_A6 A_A7 A_A8 A_A9 A_A10 A_A11 A_A12 A_A13

RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15 RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0 B_RST#
240 OHM +-5% 1/16W R4120

Damping and Termination for CLK

RCLK0

CLK0

R4003 100R 1/16W 1% RCLK0# CLK0#

DDRV

RCLK1

CLK1

1K 1/16W 1% R4006

C4002 100N 16V

R4007 100R 1/16W 1% RCLK1# CLK1#

ZQ2

1K 1/16W 1% R4009

C4003 100N 16V

DDRV A1 A8 C1 C9 D2 E9 F1 H2 H9 B2 D9 G7 K2 K8 N1 N9 R9 R1 C4004 100N 16V VDDQ_0 VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDD_0 VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_8 VDD_7

DDRV
(38.4mVr)

Damping for DDR3#1 ADDR/CMD


RP4001 0OHM 1/16W 1_WE# 1 8 1_ODT 2 7 1_CAS# 3 6 1_RAS# 4 5 RP4003 0OHM 1/16W 1 8 2 7 3 6 4 5 RP4005 0OHM 1/16W 1 8 2 7 3 6 4 5 RP4007 0OHM 1/16W 1 8 2 7 3 6 4 5 RP4009 0OHM 1/16W 1 8 2 7 3 6 4 5 RP4011 0OHM 1/16W 1 8 2 7 3 6 4 5 1_A2 1_A5 1_A0 1_CS# 1_A9 1_A7 1_A13 1_RST# 1_CKE 1_BA0 1_BA2 1_A3

Damping for DDR3#2 ADDR/CMD


RP4002 0OHM 1/16W B_RAS# 1 8 B_CAS# 2 7 B_WE# 3 6 B_ODT 4 5 RP4004 0OHM 1/16W 8 1 7 2 6 3 5 4 B_A5 B_A2 B_CS# B_A0

A1 A8 C1 C9 D2 E9 F1 H2 H9

VDDQ_0 VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDD_0 VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_8 VDD_7

A_WE# A_ODT A_CAS# A_RAS#

1_RAS# 1_CAS# 1_WE# 1_ODT 1_A5 1_A2 1_CS# 1_A0 1_A13 1_RST# 1_A9 1_A7 1_BA2 1_A3 1_BA0 1_CKE 1_A4 1_A1 1_BA1 1_A10 1_A12 1_A6 1_A8 1_A11

DDRV
(38.4mVr)

DDRV

DDRV
(38.4mVr)

B2 D9 G7 K2 K8 N1 N9 R9 R1 C4006 100N 16V

A_A2 A_A5 A_A0 A_CS# A_A9 A_A7 A_A13 A_RST# A_CKE A_BA0 A_BA2 A_A3

DDRV

RP4006 0OHM 1/16W B_A13 1 8 B_RST# 2 7 B_A9 3 6 B_A7 4 5 RP4008 0OHM 1/16W 1 8 2 7 3 6 4 5 RP4010 0OHM 1/16W 1 8 2 7 3 6 4 5 RP4012 0OHM 1/16W 1 8 2 7 3 6 4 5 B_BA2 B_A3 B_BA0 B_CKE B_A4 B_A1 B_BA1 B_A10 B_A12 B_A6 B_A8 B_A11

1K 1/10W 1% R4012

1K 1/16W 1%

1K 1/16W 1%

C4081 100N 16V RVREF2

C4082 100N 16V RVREF4

Analog Power
AVDD1V2 R4016

RVREF1

H1

VREFDQ VREFCA H5TQ1G63DFR-H9C

M8

RVREF3
R4018

H1

VREFDQ VREFCA H5TQ1G63DFR-H9C

M8

1K 1/10W 1% 1K 1/10W 1% R4019 R4123

R4122

1K 1/10W 1% R4001

1K 1/16W 1%

1K 1/16W 1%

R4014

AVDD12_MEMPLL 0R05 1/16W C4012 100N 16V

C4008 100N 16V

C4009 100N 16V

R4017

( 4 mA )

C4010 100N 16V

C4011 100N 16V

A_A4 A_A1 A_BA1 A_A10 A_A12 A_A6 A_A8 A_A11

1_A4 1_A1 1_BA1 1_A10 1_A12 1_A6 1_A8 1_A11

MT5366ZVGG TP4001 TP4002

CAPs for DRAM IO Power


DDRV

CAPs for DRAM IO Power


DDRV

GND

2,3,4,5,6,7,8,9,10,11,13,14,15,16,17

C4014 100N 16V

C4015 100N 16V

C4016 100N 16V

C4017 100N 16V

C4019 100N 16V

C4020 100N 16V

C4021 100N 16V

C4022 100N 16V

CAPs for DRAM IO Power


DDRV DDRV DDRV

Paraller
C4023 10uF 16V C4039 10uF 16V C4024 100N 16V

Paraller
C4025 10uF 16V C4068 10uF 16V C4026 100N 16V C4001 100N 16V C4027 10uF 16V C4028 10uF 16V C4029 100N 16V C4030 100N 16V

C4031 100N 16V

C4032 100N 16V

C4033 100N 16V

C4034 100N 16V

C4035 100N 16V

DDR3_DDRV= 1.5V
DVDD3V3
(28.4mVr) 3

U4004 AZ1117D-ADJTRE1 INPUT OUTPUT ADJ/GND R4021 110R 1/10W 1% + C4158 100UF 16V C4157 10uF 6.3V 2

FB4100 120R/3000mA 1 2 R4020

DDRV 0R051/8W

1 + C4038 NC/100UF 16V C4036 100N 50V

C4159 NC/10uF 6.3V

C4037 100N 50V

R4022 24R 1/10W 1%

1.25 x (1+24/110) = 1.523V


2 2011-12-19

DDR3 Interface

715G5155
19230_510_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-12 GPIO & RJ45

TPM9.1E LA

10.

EN 59

B12

GPIO & RJ45


DVBT Only
KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE USB_PWR_EN0 USB_OC_COM PWR5V_3 PWR5V_1 SCART_FS0 OPCTRL4 OPCTRL5 LCD_Clock_SCL LCD_Clock_SDA KEY _UP_DN_DCSW 5 KEY _MENU_L_R_SOURCE 5 USB_PWR_EN0 5 USB_OC_COM 5 PWR5V_3 14 PWR5V_1 14 SCART_FS0 9 OPCTRL4 4 OPCTRL5 4 LCD_Clock_SCL 5 LCD_Clock_SDA 5

B12
SPI_CLK SPI_DATA SPI_CLE CI_INT 1K 1/16W 5% R4072 E25 PWR5V_3 USB_OC_COM1 G24 USB_PWR_EN1 F23 H25 PHY RST# G23 12V_DET E24 RF_AGC_Control H20 LNA_ON/OFF G21 LVDS_CTRL H21 HDMI_SW_CTRL1 E22 HDMI_SW_CTRL2 F22 ARC_EN F21 VGA_UR_EN G20 H24 Panel_OPC G25 HP_DET G22 PANEL_VCC_ON/OFF P6 0R05 1/16W R6 T2_RESET P5 SY S_EEPROM_WP P4 PWR5V_1 1K 1/16W 5% P3 LED_G R4011 P2 USB_OC_COM P1 USB_PWR_EN0 R5 88471_INT U5 BL_ON/OFF U6 I2SAMP_RESET V6 U7 LCD_Clock_SDA LCD_Clock_SCL LED_R 0R05 1/16W OPCTRL4 OPCTRL5 AD8 AE8 AA8 AE6 AB7 Y7 U4001E GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO18 GPIO19 GPIO20 GPIO21 GPIO22 GPIO23 GPIO24 GPIO25 GPIO26 GPIO27 OPCTRL0 OPCTRL1 OPCTRL2 OPCTRL3 OPCTRL4 OPCTRL5 ADIN0_SRV ADIN1_SRV ADIN2_SRV ADIN3_SRV ADIN4_SRV ADIN5_SRV DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 CI_TSCLK CI_TSVAL CI_TSSY NC CI_TSDATA0 PVR_TSCLK PVR_TSVAL PVR_TSSY NC PVR_TSDATA0 PVR_TSDATA1 SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST ETCOL ETTXEN ETTXD3 ETTXD2 ETTXD1 ETTXD0 ETTXCLK ETRXDV ETRXD3 ETRXD2 ETRXD1 ETRXD0 ETRXCLK ETPHY CLK ETMDIO ETMDC OPWM2 OPWM1 OPWM0 MT5366ZVGG R25 R24 R22 N19 P25 N20 P21 P24 P22 M21 M20 M19 N22 N21 M22 M25 M24 R23 AA3 W5 Y5 Y3 Y2 Y1 W2 Y4 W3 W4 V3 V4 W1 AA4 V5 W6 T6 T5 R7 SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST COL/SNI ETTXEN ETTXD3 ETTXD2 ETTXD1 ETTXD0 ETTXCLK_REF_CLK RXDV ETRXD3 ETRXD2 ETRXD1 ETRXD0 ETRXCLK PHY _REFCLK ETMDIO ETMDC TP4011 TP BL_DIMMING DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 SPI_CLK SPI_DATA SPI_CLE CI_INT 15 15 15 15

MT5366

ATSC/DVBT Only
DEMOD_RST DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 SP_AMP_MUTE EDID_WEN I2SAMP_RESET SY S_EEPROM_WP PANEL_VCC_ON/OFF BL_DIMMING BL_ON/OFF LED_R LED_G DEMOD_RST 15 DEMOD_TSCLK 15 DEMOD_TSVAL 15 DEMOD_TSSY NC 15 DEMOD_TSDATA0 15 SP_AMP_MUTE 6 EDID_WEN 10,14 I2SAMP_RESET 7 SY S_EEPROM_WP 4 PANEL_VCC_ON/OFF 3 BL_DIMMING 11 BL_ON/OFF 11 LED_R 5 LED_G 5

+12V

LIGHT_SENSOR_IN AMP_MUTE

LIGHT_SENSOR_IN 5 AMP_MUTE 7

R4209 100K1/16W TP TP4009 12V_DET AMP_MUTE R4210 27K 1/16W 5% R7235

GND

2,3,4,5,6,7,8,9,10,11,12,14,15,16,17

VGA_UR_EN ARC_EN HDMI_SW_CTRL1 HDMI_SW_CTRL2 LVDS_CTRL

VGA_UR_EN

10

17 T2_RESET 17 88471_INT Panel_OPC USB_PWR_EN1 USB_OC_COM1 16 RF_AGC_Control 16 LNA_ON/OFF HP_DET

T2_RESET 88471_INT

EDID_WEN

ARC_EN 14 HDMI_SW_CTRL1 14 HDMI_SW_CTRL2 14 LVDS_CTRL 11

Panel_OPC

11

R4105 4K7 1/16W 5%

SP_AMP_MUTE R7236

USB_PWR_EN1 5 USB_OC_COM1 5 RF_AGC_Control LNA_ON/OFF

TP TP4008

SCART_FS0 KEY _UP_DN_DCSW TP KEY _MENU_L_R_SOURCE TP4010 LIGHT_SENSOR_IN

R4015 10K 1/16W 5%

SEV_ADIN0 AA9 SEV_ADIN1 AA11 SEV_ADIN2 Y 10 SEV_ADIN3 W9 SEV_ADIN4 W10 SEV_ADIN5 Y 11

HP_DET

DVDD3V3_MII

ETHERNET PHY MII Mode


U4010 RTL8201EL-VC-GR 30 31 23 24 25 26 27 22 13 14 16 17 18 19 38 36 39 42 43 34 35 48 40 6 41 3 8 9 10 11 12 44 45 4 5 1 2 46 29 32 PHY RST# R4169 2.49KOHM 1/10W C4135 100N 16V

ESD & Surge Protect


U4011 NC/uClamp2512T.TCT MDI_TN MDI_TP MDI_RP MDI_RN 8 7 6 5 OUT1 OUT2 OUT3 OUT4 IN1 IN2 IN3 IN4 1 2 3 4 MDI_TN MDI_TP MDI_RP MDI_RN

ETMDC ETMDIO ETTXCLK_REF_CLK C4151 NC/10P 50V

R4154 R4156

22R 1/16W 5% 22R 1/16W 5%

1K5 1/16W 5% R4155

R4162 22R 1/16W 5%

C4155 NC/10P 50V

ETRXCLK C4154 NC/10P 50V

R4164 22R 1/16W 5%

C4156 NC/10P 50V

ETTXD0 4 ETTXD1 3 ETTXD2 2 ETTXD3 1 ETTXEN TX_CLK RXDV ETRXD0 1 ETRXD1 2 ETRXD2 3 ETRXD3 4 RX_CLK COL/SNI CRS/RPTR RXER/FXEN MII_XTAL_IN MII_XTAL_OUT
2

5 RP4019 6 22R 7 8 R4175 8 22R 7 RP4020 6 5 R4177 R4166 R4165 R4160 R4167 LED0_AD0 LED1_AD1 22R 1/16W 5% 22R 1/16W 5% 0R05 1/16W 0R05 1/16W 0R05 1/16W 22R 1/16W 5%

MDC MDIO TXD0 TXD1 TXD2 TXD3 TXEN TXC RXDV RXD0 RXD1 RXD2 RXD3 RXC COL/SNI CRS/RPTR RXER/FXEN CKXTAL1 CKXTAL2 LED0/PHY AD0 LED1/PHY AD1 DVDD12 DVDD33 DVDD33 DVDD33 GND GND GND GND

PWOUT12A PWOUT12D AVDD33 AVDD33 NC NC NC NC NC NC NC NC MDI[1]+ MDI[1]MDI[0]+ MDI[0]RSET PHY RSTB INTB

DVDD12

C4145 10UF 10V R4157 0R05 1/10W

C4146 100N 16V

C4147 10UF 10V

C4148 100N 16V

DVDD3V3_MII R4117 4K7 1/16W 5% MDI_RP MDI_RN MDI_TP MDI_TN C4132 NC/100N 16V C4133 NC/100nF 25V C4134 10N 50V

1 C4138 27P 50V


4

X4001 3 25MHz C4139 27P 50V R4170 0R05 1/10W C4140 DVDD3V3 10UF 10V C4141 100N 16V DVDD3V3_MII

DVDD12 28 15 21 37

R4161 NC/49.9 OHM 1/16W 1%

R4163 NC/49.9 OHM 1/16W 1%

C4136 NC/100nF 25V

C4137 10N 50V

RJ45
R4190 R4172 0R05 1/10W 1 2 3 4 5 6 7 8 9 10 11 12 P1 P2 P3 P4 P5 P6 P7 NC P8 P9 P10 P11 P12
14 TH1 TH2 13

CN4011 RJ45 CONN+LED

MDI_TP MDI_TN MDI_RP MDI_RN R4173 NC/49.9 OHM 1/16W 1% LED1_AD1 510R 1/10W DVDD3V3_MII LED0_AD0 510R 1/10W R4168 R4171

C4153 100N 16V

C4152 100N 16V

7 20 33 47

0R05 1/10W

DVDD3V3_MII

R4174 NC/49.9 OHM 1/16W 1%

25MHz REF_CLK from MT5366


FB4007 NC/60OHM PHY _REFCLK 1 2 C4150 NC/47P 50V 4K7 1/16W 5% R4179 4K7 1/16W 5% R4189 4K7 1/16W 5% R4191 4K7 1/16W 5% R4192 NC/4K7 1/16W 5% R4187 4K7 1/16W 5% R4188 RXDV CRS/RPTR COL/SNI RXER/FXEN LED0_AD0 LED1_AD1 DVDD3V3_MII NC/4K7 1/16W 5% R4181 NC/4K7 1/16W 5% R4182 NC/4K7 1/16W 5% R4183 NC/4K7 1/16W 5% R4184 4K7 1/16W 5% R4185 NC/4K7 1/16W 5% R4186 PHY RST#

R4178 5.1K 1%

C4149 10N 50V

C4142 NC/100N 16V

C4143 100N 16V

C4144 10N 50V

SEPARATE GROUND
2 2011-12-19

GPIO & RJ45

715G5155
19230_511_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-13 HDMI Switch & Connector

TPM9.1E LA

10.

EN 60

B13

HDMI Switch & Connector

B13
MT5366 Analog Power
AE3 AD3 AE4 AD4 AE5 AD5 AE2 AD2 AB6 AC6 AC5 AB5 AD6 AE1 AA6 AC4 M_RX1_0 M_RX1_0B M_RX1_1 M_RX1_1B M_RX1_2 M_RX1_2B M_RX1_C M_RX1_CB HDMI_CEC HDMI_SW_HPD HDMI_SW_SCL HDMI_SW_SDA PWR5V_2 1K 1/16W 5%R5066 AVDD33_HDMI AVDD12_HDMI AVDD3V3 R5002 AVDD33_HDMI 0R05 1/10W C5009 100N 16V DVDD3V3 1 FB5002 2 120R/3000mA C5002 NC/10UF 10V C5003 100N 16V C5004 100N 16V C5005 C5006 C5007 C5008 100N 16V 100N 16V 100N 16V 100N 16V SMD/0402 SMD/0402 SMD/0402 SMD/0402 OSCL0 OSDA0 HDMI_SW_CTRL1 HDMI_SW_CTRL2 SPDIF_OUT ARC_EN EDID_WEN C5011 100N 16V OSCL0 OSDA0 4 4 U4001G RX_0 RX_0B RX_1 RX_1B RX_2 RX_2B RX_C RX_CB M_RX1_2 R5054 M_RX1_1 R5055 M_RX1_0 R5056 M_RX1_C R5057 100R 1/16W 5% 100R 1/16W 5% 100R 1/16W 5% 100R 1/16W 5% M_RX1_2B M_RX1_1B M_RX1_0B M_RX1_CB HDMI_CEC HDMI_HPD HDMI_SCL HDMI_SDA PWR5V AVDD33_HDMI

HDMI Switch

+5V_SW

D5002 NC/BAT54C 2

+5V_SW DV33_TMDS

NC/120R/3000mA FB5003

RX2_0+ RX2_0DV33_TMDS RX2_C+ RX2_CHDMI2_SCL HDMI2_SDA HPD2 1 2

NEAR IC
DV33_TMDS

5V Input Detect
PWR5V_1 PWR5V_3 PWR5V_1 PWR5V_3 13 13

RX2_2+ RX2_2DV33_TMDS RX2_1+ RX2_1-

R5072 4K7 1/16W 5%

HPD3

U5003 TMDS361BPAGR

C5010 1UF16V

HDMI_SW_CTRL1 13 HDMI_SW_CTRL2 13 SPDIF_OUT ARC_EN EDID_WEN GND 6,8 13 10,13 2,3,4,5,6,7,8,9,10,11,12,13,15,16,17

AVDD1V2 R5003 AVDD12_HDMI 0R05 1/10W

HPD3 D2+_2 D2-_2 VCC D1+_2 D1-_2 GND D0+_2 D0-_2 VCC CLK+_2 CLK-_2 SCL2 SDA2 HPD2 LP

64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49

HDMI3_SDA HDMI3_SCL RX3_CRX3_C+ DV33_TMDS RX3_0RX3_0+ RX3_1RX3_1+ DV33_TMDS RX3_2RX3_2+

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

D2+_SINK D2-_SINK VCC D1+_SINK D1-_SINK GND D0+_SINK D0-_SINK VCC CLK+_SINK CLK-_SINK GND SCL_SINK SDA_SINK HPD_SINK S1/SCL

SDA3 SCL3 GND CLK-_3 CLK+_3 VCC D0-_3 D0+_3 GND D1-_3 D1+_3 VCC D2-_3 D2+_3 GND VSadj

D2+_1 D2-_1 VCC D1+_1 D1-_1 GND D0+_1 D0-_1 VCC CLK+_1 CLK-_1 SCL1 SDA1 HPD1 I2C_SEL S2/SDA

48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33

RX1_2+ RX1_2DV33_TMDS RX1_1+ RX1_1RX1_0+ RX1_0DV33_TMDS RX1_C+ RX1_CHDMI1_SCL HDMI1_SDA HPD1

SIDE HDMI
HDMI_SW_CTRL1
DV33_TMDS

HDMI

HDMI (Ext)

AVDD12_HDMI

NONE

AVSS33_HDMI MT5366ZVGG

H H

L H
R5004 NC/2.2K1/16W

L L

H L

HDMI_SW_CTRL2

R5043 NC/4.7K1/16W DV33_TMDS

R5006 R5007 NC/4.7K1/16W R5070

HDMI_SW_CTRL2 NC/100OHM1/16W OSDA0 0R05 1/16W

GPIO 10

R5005 4.02K 1%

R5008 0R05 1/16W

For one HDMI input (HDMI1/ Support ARC)


R5062 RX2_2+ NC/0R05 1/16W R5063 RX2_2M_RX1_2B NC/0R05 1/16W RX2_0NC/0R05 1/16W M_RX1_2 RX2_0+ NC/0R05 1/16W R5077 M_RX1_0B HDMI2_SDA NC/0R05 1/16W R5076 M_RX1_0 R5080 HDMI2_SCL NC/0R05 1/16W R5081 HDMI_SW_SDA HDMI_SW_SCL

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

R5071

M_RX1_2 M_RX1_2B DV33_TMDS M_RX1_1 M_RX1_1B

M_RX1_0 M_RX1_0B DV33_TMDS M_RX1_C M_RX1_CB

R5010 0R05 1/16W R5012 R5013

R5009 NC/4.7K1/16W 10K 1/16W 5% 10K 1/16W 5% 4K7 1/16W 5%

R5073 R5011

OSCL0 0R05 1/16W HDMI_SW_CTRL1 NC/100OHM1/16W GPIO 9

NC/4.7K1/16W

DV33_TMDS R5074 RX2_1+ NC/0R05 1/16W R5075 RX2_1NC/0R05 1/16W M_RX1_1B RX2_CNC/0R05 1/16W M_RX1_1 RX2_C+ NC/0R05 1/16W R5079 M_RX1_CB R5078 M_RX1_C HPD2 NC/0R05 1/16W R5082 HDMI_SW_HPD

HDMI_SW_SCL HDMI_SW_SDA HDMI_SW_HPD

R5014

SIDE HDMI ESD PROTECTER


RX1_2+ RX1_2RX1_1+ RX1_1U5004 1 2 IN1 IN2 4 5 IN3 IN4 NC/RClamp0524P.TCT RX1_2+ 10 OUT1 9 RX1_2OUT2 RX1_1+ 7 OUT3 6 RX1_1OUT4

GND 8 GND 8 GND 8 GND 8 GND 8 GND 8

CN5002 +5V_SW TMDSD0+ TMDSD0TMDSD1+ TMDSD1TMDSD2+ TMDSD2TMDSC+ TMDSCSCL SDA CEC HPD VCC5 NC DSHLD0 DSHLD1 DSHLD2 CSHLD0 DDC_GND SHLD_GND1 SHLD_GND2 SHLD1 SHLD2 SHLD3 SHLD4 SHLD5 HDMI 7 9 4 6 1 3 10 12 15 16 13 19 18 14 2 5 8 11 17 20 21 22 23 24 25 26 PWR5V_2 ARC_HDMI HPLUGP2_5V C5013 100N 16V SCL_2 SDA_2 RX2_0+ RX2_0RX2_1+ RX2_1RX2_2+ RX2_2HPLUGP2_5V RX2_C+ RX2_CR5019 100R 1/16W 5% R5020 100R 1/16W 5% CEC_2 D5005 BAS316 2 A K HDMI2_SCL HDMI2_SDA R5021 NC/0R05 1/16W

Audio Reture Channel (ARC)


FB5004 600R/500mA 1 2 AVDD3V3

RX1_0+ RX1_0RX1_C+ RX1_C-

U5005 1 2 IN1 IN2 4 5 IN3 IN4

HDMI 1/Support ARC

A K

D5004 BAS316 2

NC/RClamp0524P.TCT RX1_0+ 10 OUT1 9 RX1_0OUT2 RX1_C+ 7 OUT3 6 RX1_COUT4

ARC_EN
100N 16V C5012
R5022 R5023 R5024

ARC_EN

IN3 IN4

470K 1/16W 5% R5025

U5007

BAS316 D5006

NC/PDZ24B ZD5002

1K 1/16W 5% R5026

R5028 33R 1/16W 5%

R5027 Q5002 BC847C 1K 1/16W 5%

A K

HPD2

1 2 3 4

R5029 4K7 1/16W 5%

E0 VCC E1 WC E2 SCL VSS SDA

8 7 6 5

HDMI2_SCL HDMI2_SDA

M24C02-WDW6P

R5030 EDID_WEN Q5003 BC847C GPIO 27 4K7 1/16W 5%

ARC_HDMI

C5017 1UF 10V

1 5

EDID_WEN: write_enable: High write_disable: Low

ARC disable

H
4 R5058 180ohm 1/16W +/-5% R5060 82R 1/16W 5%

AVDD3V3

GPIO 11

SPDIF_OUT

R5059 100K 1/16W 5%

U5015 74LVC1G125GV

HDMI 2 ESD PROTECTER


RX3_2+ RX3_2RX3_1+ RX3_1U5016 1 2 IN1 IN2 4 5 IN3 IN4 NC/RClamp0524P.TCT RX3_2+ 10 OUT1 9 RX3_2OUT2 RX3_1+ 7 OUT3 6 RX3_1OUT4

PWR5V_2

GND 8 GND 8 GND 8

3
NC/RClamp0524P.TCT RX3_0+ 10 OUT1 9 RX3_0OUT2 RX3_C+ 7 OUT3 6 RX3_COUT4 NC/RClamp0524P.TCT CEC_3 10 OUT1 9 SCL_3 OUT2 SDA_3 7 OUT3 6 PWR5V_3 OUT4

GND GND GND GND

ARC enable

R5061 4K7 1/16W 5%

CEC_1 SCL_1 SDA_1 PWR5V_1

U5006 1 2 IN1 IN2 4 5

NC/RClamp0524P.TCT CEC_1 10 OUT1 9 SCL_1 OUT2 SDA_1 7 OUT3 6 PWR5V_1 OUT4

3 3 3 3 3 GND 3 GND 3 GND

3V3SB CN5004 TMDSD0+ TMDSD0TMDSD1+ TMDSD1TMDSD2+ TMDSD2TMDSC+ TMDSCSCL SDA CEC HPD VCC5 NC DSHLD0 DSHLD1 DSHLD2 CSHLD0 DDC_GND SHLD_GND1 SHLD_GND2 SHLD1 SHLD2 SHLD3 SHLD4 SHLD5 HDMI 7 9 4 6 1 3 10 12 15 16 13 19 18 14 2 5 8 11 17 20 21 22 23 24 25 26 SCL_3 SDA_3 CEC_3 PWR5V_31 RX3_0+ RX3_0RX3_1+ RX3_1RX3_2+ RX3_2RX3_C+ RX3_CHPLUGP3_5V R5045 100R 1/16W 5% R5052 100R 1/16W 5% HDMI3_SCL HDMI3_SDA RX3_0+ RX3_0D5003 BAS316 RX3_C+ RX3_CU5014 1 2 IN1 IN2 4 5 IN3 IN4

HDMI 2

+5V_SW D5010 BAS316 2 A K FB5006 600R/500mA 1 2 R5047 CEC_1 R5015 CEC_2 CEC_3 R5017 R5018 0R05 1/10W

K A

R5016 27K 1/10W 5% HDMI_CEC 0R05 1/10W CEC_3 SCL_3 SDA_3 PWR5V_3 U5013 1 2 IN1 IN2 4 5 IN3 IN4

100N 16V

C5016

0R05 1/10W

R5065

R5053

ZD5001 NC/BZX384-C5V6

C5018 100N 16V

NC/0R05 1/16W

U5012 HPD3 1 2 3 4 E0 VCC E1 WC E2 SCL VSS SDA 8 7 6 5

R5050 470K 1/16W 5%

NC/PDZ24B ZD5004

BAS316 D5012

1K 1/16W 5% R5044

R5064 Q5006 BC847C 1K 1/16W 5% SMD/0402

A K

EDID_WEN: write_enable: High write_disable: Low


HDMI3_SCL HDMI3_SDA R5049 EDID_WEN Q5007 BC847C 4K7 1/16W 5% GPIO 27

A K

2 D5011 BAS316

HPLUGP3_5V

R5051

HDMI 1 ESD PROTECTER


CLK pull down resistance
RX2_2+ RX2_2RX2_1+ RX2_1R5067 RX1_C- NC/3.3K 1/16W R5068 NC/3.3K 1/16W R5069 NC/3.3K 1/16W RX2_0+ RX2_0RX2_C+ RX2_CU5008 1 2 IN1 IN2 4 5 IN3 IN4 NC/RClamp0524P.TCT RX2_2+ 10 OUT1 9 RX2_2OUT2 RX2_1+ 7 OUT3 6 RX2_1OUT4

R5048 4K7 1/16W 5%

M24C02-WDW6P

R5046 33R 1/16W 5%

PWR5V_3

CN5003 20 22 SHLD0 TMDSD2+ SHLD2 DSHLD0 TMDSD2TMDSD1+ DSHLD1 TMDSD1TMDSD0+ DSHLD2 TMDSD0TMDSC+ CSHLD0 TMDSCCEC NC SCL SDA DDC_GND SHLD3 VCC5 HPD SHLD1 HDMI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 RX1_2+ RX1_2RX1_1+ RX1_1RX1_0+ RX1_0RX1_C+ RX1_CCEC_1 SCL_1 SDA_1 PWR5V_1 HPD-1 R5031 100R 1/16W 5% R5032 100R 1/16W 5% D5008 BAS316 1 2 HPLUGP1_5V HPLUGP1_5V A K HPD-1 HDMI1_SCL HDMI1_SDA R5033 NC/0R05 1/16W 1

RX2_C-

Side HDMI
+5V_SW D5007 BAS316 2 FB5005 600R/500mA HPLUGP1_5V 1 2 A K

U5009 1 2 IN1 IN2 4 5 IN3 IN4

RX3_C-

NC/RClamp0524P.TCT RX2_0+ 10 OUT1 9 RX2_0OUT2 RX2_C+ 7 OUT3 6 RX2_COUT4

CEC_2 SCL_2 SDA_2 PWR5V_2 R5034 R5035 R5036

U5011 1 2 IN1 IN2 4 5 IN3 IN4

23 21

100N 16V C5014

NC/RClamp0524P.TCT CEC_2 10 OUT1 9 SCL_2 OUT2 SDA_2 7 OUT3 6 PWR5V_2 OUT4

C5015

470K 1/16W 5% R5037

NC/PDZ24B ZD5003

BAS316 D5009

R5038

100N 16V

1K 1/16W 5%

R5039 Q5004 BC847C 1K 1/16W 5%

U5010 HPD1 1 2 3 4 E0 VCC E1 WC E2 SCL VSS SDA 8 7 6 5

R5040 33R 1/16W 5%

R5041 4.7K 1/10W

HDMI1_SCL HDMI1_SDA

EDID_WEN: write_enable: High write_disable: Low


R5042 EDID_WEN Q5005 BC847C 4K7 1/16W 5% GPIO 27

A K

M24C02-WDW6P

GND

GND

10K 1/10W 5% 10K 1/10W 5% 10K 1/10W 5%

47K 1/10W 47K 1/10W

47K 1/10W

47K 1/10W

47K 1/10W

47K 1/10W

2011-12-19

PWR5V_1

HDMI Switch & Connector

715G5155
19230_512_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-14 DVB T/C Demodulator MT5135

TPM9.1E LA

10.

EN 61

B14

DVB T/C Demodulator MT5135

B14
R1212 NC/0R05 1/16W 5135_DV10 PIN13 R1213 0R05 1/16W C1185 NC/100N 16V C1200 NC/100N 16V RF_AGC_T DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST 5366_XTALO 5135_REFCLKM 5366_XTALI 5135_REFCLKP 17 Parallel_TSCLK 17 Parallel_TSVALID 17 Parallel_TSSY NC 17 17 17 17 17 17 17 17 Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7 RF_AGC_T 16 DEMOD_TSCLK 13 DEMOD_TSVAL 13 DEMOD_TSSY NC 13 DEMOD_TSDATA0 13 SPI_CLK 13 SPI_DATA 13 SPI_CLE 13 CI_INT 13 DEMOD_RST 13 5135_REFCLKM 8 5135_REFCLKP 8 Parallel_TSCLK Parallel_TSVALID Parallel_TSSY NC Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7 GND 2,3,4,5,6,7,8,9,10,11,12,13,14,16,17 5135_DV33 R1224 NC/0R05 1/16W PIN39 R1225 0R05 1/16W 16,17 T/C/T2_TUNER_SDA 16,17 T/C/T2_TUNER_SCL MT5135AD+ MT5135ADMT5135AD+ 16 MT5135AD- 16 T/C/T2_TUNER_SDA T/C/T2_TUNER_SCL

DEMODULATOR MT5135/MT5136 Co-layout


M_CI_INDATA5 M_CI_INVALID M_CI_INDATA4 CI_IREQ# M_CI_INDATA3 CI_WE# PIN90 5135_DV33 M_CI_INDATA2 CI_A14 M_CI_INDATA1 CI_A13 M_CI_INDATA0 5135_DV10 PIN82 CI_A8 M_CI_INSYNC CI_A9 CI_IOWR# CI_A11 CI_IORD# CI_OE# CI_VS1# CI_A10 PIN72 5135_DV33 CI_CE1# M_CI_OUTDATA7 CI_D7 M_CI_OUTDATA6 CI_D6 M_CI_OUTDATA5

R1214 NC/0R05 1/16W 5135_DV10 PIN49 R1216 0R05 1/16W C1194 NC/100N 16V 5135_DV33

R1226 NC/0R05 1/16W PIN82 R1227 0R05 1/16W C1201 NC/100N 16V

96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65

PAD_A23 PAD_A16 PAD_A22 PAD_READY PAD_A21 PAD_WE_ DGND33 DVDD33 PAD_A20 PAD_A14 PAD_A19 PAD_A13 PAD_A18 DVDD10 DGND10 PAD_A8 PAD_A17 PAD_A9 PAD_IOWR_ PAD_A11 PAD_IORD_ PAD_OE_ PAD_VS1_ PAD_A10 DGND33 DVDD33 PAD_CE1_ PAD_D15 PAD_D7 PAD_D14 PAD_D6 PAD_D13

U1005 MT5135AE 5135_DV10

R1217 NC/0R05 1/16W PIN72 R1218 0R05 1/16W C1195 NC/100N 16V R1228 0R05 1/16W PIN109 R1230 0R05 1/16W PIN112

M_CI_INCLK M_CI_INDATA6 CI_A12 M_CI_INDATA7 CI_A7 M_CI_OUTCLK CI_A6 CI_RESET CI_A5 CI_WAIT# CI_A4 CI_A3 PIN109 CI_REG# 5135_DV33 PIN112 5135_DV10 CI_A2 M_CI_OUTVALID CI_A1 M_CI_OUTSY NC CI_A0 M_CI_OUTDATA0 CI_D0 M_CI_OUTDATA1 CI_D1 M_CI_OUTDATA2 CI_D2 CI_CD2# CI_INT 5135_DV33
(26.8mVr)

PAD_SPI_CLE PAD_SPI_DATA PAD_SPI_CLK PAD_PVR_TS_DATA1 PAD_PVR_TS_DATA0(TS_ERR) PAD_PVR_TS_SYNC(TS_DATA7) PAD_PVR_TS_VAL(TS_DATA6) PAD_PVR_TS_CLK(TS_DATA5) PAD_CI_TS_DATA0(TS_DATA4) PAD_CI_TS_SYNC(TS_DATA3) PAD_CI_TS_VAL(TS_DATA2) PAD_CI_TS_CLK(TS_DATA1) DGND33 DVDD33 PAD_DEMOD_TS_DATA0(TS_DATA0) PAD_DEMOD_TS_SYNC(TS_SYNC) PAD_DEMOD_TS_VAL(TS_VAL) PAD_DEMOD_TS_CLK(TS_CLK) PAD_MT5135_RST DVDD10 AVDD12_PLL AVDD33_RSSI PAD_ADIN0 AVSS33_RSSI PAD_TN PAD_TP AVDD33_DEMOD_3 AVSS33_DEMOD_3 PAD_XTALI AVSS33_XTAL PAD_XTALO AVDD33_XTAL

97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128

PAD_A15 PAD_A24 PAD_A12 PAD_A25 PAD_A7 PAD_VS2_ PAD_A6 PAD_PCMCIA_RESET PAD_A5 PAD_WAIT_ PAD_A4 PAD_A3 DGND33 DVDD33 PAD_REG_ DGND10 DVDD10 PAD_A2 PAD_BVD2 PAD_A1 PAD_BVD1 PAD_A0 PAD_D8 PAD_D0 PAD_D9 PAD_D1 PAD_D10 PAD_D2 PAD_CD2_ PAD_CI_INT DGND33 DVDD33

PAD_D5 PAD_D12 PAD_D4 PAD_D11 PAD_D3 PAD_CD1_ PAD_CHIP_CTRL PAD_S2_TS_DATA7 PAD_S2_TS_DATA6 PAD_S2_TS_DATA5 PAD_S2_TS_DATA4 PAD_S2_TS_DATA3 PAD_S2_TS_DATA2 PAD_S2_TS_DATA1 DVDD33 DGND33 PAD_S2_TS_DATA0 AD_S2_TS_VAL PPAD_S2_TS_SY NC PAD_S2_TS_CLK PAD_RF_AGC PAD_IF_AGC PAD_TUNER_CLK PAD_TUNER_DATA DVDD10 AVSS10_5 AVDD33_IFPGA AVDD12_DEMOD PAD_IFPGA_INP PAD_IFPGA_INN AVSS12_DEMOD_3 PAD_EXT_CLKSEL

64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33

CI_D5 M_CI_OUTDATA4 CI_D4 M_CI_OUTDATA3 CI_D3 CI_CD1# PAD_CHIP_CTRL Parallel_TSDATA7 Parallel_TSDATA6 Parallel_TSDATA5 Parallel_TSDATA4 Parallel_TSDATA3 Parallel_TSDATA2 Parallel_TSDATA1 PIN49 Parallel_TSDATA0 5135_DV33

R1219 NC/0R05 1/16W 4K7 1/10W 5% R1113 5135_DV10 PIN90 R1221 0R05 1/16W C1196 NC/100N 16V

R1157 0R05 1/16W 5135_SCL 5135_SDA PIN39 R1158 R1159

Parallel_TSVALID Parallel_TSSY NC Parallel_TSCLK T/C/T2_TUNER_SCL T/C/T2_TUNER_SDA

0R05 1/16W 0R05 1/16W 5135_DV10 (10.8mVr)

DEMODULATOR 27MHz Crystal


5366_XTALI R1130 0R05 1/16W XTALI Should be 50ohm R1133 51R 1% X1001 NC/27MHz

AVDD33_4 5135_AV12 (0mVr) MT5135AD+ MT5135ADR1129 AVDD33_3 4K7 1/10W 5% R1132 NC/4K7 1/10W 5%

2 1

4 3

5366_XTALO R1144 0R05 1/16W

R1141 51R 1% Should be 50ohm XTALO

RP1002 PIN13 47 OHM 1/16W 5% 1 8 5135_DV33 2 7 3 6 4 5 R1146 DEMOD_RST 47R 1/16W 5% 5135_DV10 5135_AV12

CI_OCP

RSSI

XTALO

XTALI

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

TP TP1001

TP TP1003

AVDD33_2

AVDD33_3

SPI_CLE SPI_DATA SPI_CLK

AVDD33_1

GPIO

TN TP

5135_DV33

R1122 NC/10K 1/16W 5% DEMOD_RST

CI Interface
5135_DV33 5135_DV33 5135_DV33 R1107 10K 1/16W 5% R1110 10K 1/16W 5% CI_VS1# CI_CE2# CI_D3 CI_D4 CI_D5 CI_D6 CI_D7 CI_CE1# CI_A10 CI_OE# CI_A11 CI_A9 CI_A8 CI_A13 CI_A14 CI_WE# CI_IREQ# CI2_VCC CI2_VCC CI_INVALID CI_INCLK CI_A12 CI_A7 CI_A6 CI_A5 CI_A4 CI_A3 CI_A2 CI_A1 CI_A0 CI_D0 CI_D1 CI_D2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

CI_PWR_EN R1151 0R05 1/16W R1125 10K 1/16W 5%

DEMOD_TSDATA0 DEMOD_TSSY NC DEMOD_TSVAL DEMOD_TSCLK R1152 10M

PCMCIA 5V Slot
CN1007 GND GND D3 CD1# D4 D11 D5 D12 D6 D13 D7 D14 CE1# D15 A10 CE2# OE# VS1# A11 IORD# A9 IOWR# A8 A17 A13 A18 A14 A19 WE# A20 READY #:IREQ# A21 VCC VCC PCMCIA VPP2 VPP1 A16 A22 A15 A23 A12 A24 A7 A25 A6 VS2# A5 RESET A4 WAIT# A3 INPACK A2 REG# A1 BVD2#:SPKR A0 BVD1#:STSCHG D0 D8 D1 D9 D2 D10 PCMICA CARD WP# CD2# GND GND 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 CI_CD1# CI_OUTDATA3 CI_OUTDATA4 CI_OUTDATA5 CI_OUTDATA6 CI_OUTDATA7 CI_CE2# CI_VS1# CI_IORD# CI_IOWR# CI_INSY NC CI_INDATA0 CI_INDATA1 CI_INDATA2 CI_INDATA3 CI_INDATA4 CI_INDATA5 CI_INDATA6 CI_INDATA7 CI_OUTCLK CI_RESET CI_WAIT# CI_REG# CI_OUTVALID CI_OUTSY NC CI_OUTDATA0 CI_OUTDATA1 CI_OUTDATA2 CI_CD2# CI2_VCC CI2_VCC

C1081 10PF 50V

RF_AGC_T

RSSI

R1105 R1106 10K 1/16W 5% 10K 1/16W 5% CI_CD1# CI_CD2# CI2_VCC C1071 100N 50V C1072 100N 50V

R1153 7M5

CI_WAIT# R1108 10K 1/16W 5% R1109 NC/10K 1/16W 5%CI_OUTCLK CI_IREQ# R1111 10K 1/16W 5%

Function 1 (Internal CI) CI Interface


M_CI_INVALID M_CI_INSY NC M_CI_INDATA0 M_CI_INDATA1 M_CI_INDATA2 M_CI_INDATA3 M_CI_INDATA4 M_CI_INDATA5 M_CI_INDATA6 M_CI_INDATA7 C1083 100N 16V C1084 100N 16V C1085 100N 16V C1086 100N 16V C1087 100N 16V C1088 100N 16V M_CI_INCLK R1114 R1115 R1116 R1117 R1118 R1119 R1120 R1121 R1123 R1124 22R 22R 22R 22R 22R 22R 22R 22R 22R 22R 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% CI_INVALID CI_INSY NC CI_INDATA0 CI_INDATA1 CI_INDATA2 CI_INDATA3 CI_INDATA4 CI_INDATA5 CI_INDATA6 CI_INDATA7 CI_INCLK NC/10pF 50V C1075

DVDD3V3

5135_DV33

R1161 0R05 1/10W

C1082 NC/10uF 16V

R1128 47R 1/16W 5%

Close to MT5366
AVDD33_1

69 70

69 70

R1162 0R05 1/10W

AVDD1V2 C1089 NC/10uF 16V C1090 100N 16V

5135_AV12

R1160 0R05 1/10W AVDD33_2

C1091 NC/10uF 16V

C1092 C1093 100N 16V 100N 16V

M_CI_OUTVALID M_CI_OUTSY NC M_CI_OUTDATA0 M_CI_OUTDATA1 M_CI_OUTDATA2 M_CI_OUTDATA3 M_CI_OUTDATA4 M_CI_OUTDATA5 M_CI_OUTDATA6 M_CI_OUTDATA7

R1131 R1134 R1135 R1136 R1137 R1138 R1139 R1140 R1142 R1143

22R 22R 22R 22R 22R 22R 22R 22R 22R 22R

1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W

5% 5% 5% 5% 5% 5% 5% 5% 5% 5%

CI_OUTVALID CI_OUTSY NC CI_OUTDATA0 CI_OUTDATA1 CI_OUTDATA2 CI_OUTDATA3 CI_OUTDATA4 CI_OUTDATA5 CI_OUTDATA6 CI_OUTDATA7

CI Bus Power Control


+5V_SW 10UF 10V C1077 (65mVr) 5 CI_PWR_EN 4 FB1015 220R/2000mA 1 2 3CI_OCP 1 2 (0mVr) CI2_VCC

R1163 0R05 1/10W

C1094 NC/10uF 16V

C1095 100N 16V VCCK

M_CI_OUTCLK R1156 0R05 1/10W 5135_DV10

R1145 47R 1/16W 5% C1076 NC/10pF 50V

CI_OUTCLK

U1006 IN EN OUT GND OC

C1078

C1096 NC/10uF 16V

C1097 100N 16V

C1109 10UF 10V

C1102 100N 50V

C1103 100N 50V

C1104 100N 50V

C1105 100N 50V

C1106 100N 50V DVDD3V3

AVDD33_4

R1166 0R05 1/10W

ANALOG POWER 5135_DV10 form VCCK


C1098 NC/10uF 16V C1099 100N 16V

100N 16V

R1164 0R05 1/10W

R1148 4K7 1/16W 5%

G5250M1T1U

R1149 4K7 1/16W 5%

10UF 10V C1079

AVDD33_3

71 72

71 72

R1150 10K 1/16W 5%

2011-12-19

DVB T/C Demodulator MT5135

715G5155
19230_513_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-15 DVB-T/C/T2 Tuner

TPM9.1E LA

10.

EN 62

B15

DVB-T/C/T2 Tuner

B15
MT5135AD+ MT5135AD17 T2_AINP 17 T2_AINN 15,17 T/C/T2_TUNER_SDA 15,17 T/C/T2_TUNER_SCL TU_FAT_IN2+ TU_FAT_IN217 T2_IFAGC 17 T2_RFAGC RF_AGC_Control RF_AGC_T IF_AGC LNA_ON/OFF RF_AGC_H R1501 +5V_TUNER NC/G552B1TA1U +5V_ANT C1188 NC/100N16V 1 4 VOUT
GND

MT5135AD+ 15 MT5135AD- 15 T2_AINP T2_AINN T/C/T2_TUNER_SDA T/C/T2_TUNER_SCL

TU_FAT_IN2+ 8 TU_FAT_IN2- 8 T2_IFAGC T2_RFAGC

Current Limit Switch


TH1300 1 NC/PTCR 2 NC/0R05 1/16W

RF_AGC_Control 13 RF_AGC_T 15 IF_AGC 8 LNA_ON/OFF 13 RF_AGC_H 8 GND 2,3,4,5,6,7,8,9,10,11,12,13,14,15,17

Tuner

U1000
C1189 R1215

VIN FLAG

5 3

T/C/T2_TUNER_SCL

Q1501 TUNER_CLK 2N7002

ON/ON

FROM MN88472 or MT5135


DVDD3V3

NC/4K7 1/16W 5%

+B activ e ANT +B RF-AGC Monitor NC BT Monitor SCL SDA IF Monitor IF AGC IFD-out1 IFD_out2
TH4 TH3 TH2 TH1

1 2 3 5 6 9 10 11 12 13 14

+5V_ANT +5V_VCC (0mVr) RF_AGC_T TT_SCL TT_SDA IF_AGCT DIF1_OUT2 DIF1_OUT1 +5V_VCC 1

NC/100N16V

R1502

NC/0R05 1/16W

FB1034 2 120R/600mA C1159 C1160 100N 50V 10UF 10V

+5V_TUNER T/C/T2_TUNER_SDA

FROM MN88472 or MT5135


DVDD3V3

Q1500 TUNER_DATA 2N7002

18 17 16 15

ENV57U04D8F TU1003

TUNER I2C level shift

GND

I2C

+5V_TUNER

RF AGC
R1181 4K7 1/10W 5%

T2_RFAGC

AGC:ON (analog),OFF(digital)

DVB-T/C/T2 TUNER CIRCUIT

From MN88472
R1180 4K7 1/10W 5% TT_SCL TT_SDA C1157 39P 50V 100R 1/10W 5% R1182 R1183 100R 1/10W 5% C1158 39P 50V
1

IF BPF for T2
R1186 RF_AGC_Control NC/100K 1/16W 5% 2

TUNER_CLK TUNER_DATA

R1187 10K 1/16W 5% RF_AGC_T

R1254 NC/0R05 1/16W RF_AGC_S 3

GPIO_6

C1508 DIF1_OUT2 R1222 0R05 1/10W TUN_INP R1505 33R 1/16W 5% 100N 16V L1500 NC/0.33uH 10% C1511 DIF1_OUT1 R1244 0R05 1/10W TUN_INN R1507 33R 1/16W 5% 100N 16V R1508 22R 1/16W 5% C1509 NC/56pF 50V R1506 22R 1/16W 5%

C1507 T2_AINP 100N 16V R1528 NC/270R 1/16W 5% C1513 T2_AINN 100N 16V

RF_AGC_H

From MT5135

C1163 470nF 16V

Q1001 NC/BC857C R1188 0R05 1/10W

From MT5366

GPIO_34

LNA(LG tuner)
LNA_CONTROL C1186 NC/1NF 50V 1

FB1037 NC/120R/3000mA 2 LNA_ON/OFF

DIF
C1164 NC/5P6 50V

IF AGC (Panasion tuner)


R1195 C1202 33pF 50V 10N 50V C1166 0R05 1/16W R1191 0R05 1/16W 10N 50V C1170 C1203 33pF 50V L1001 NC/0.22uH 10% L1006 NC/0.12UH L1007 NC/0.22UH L1008 NC/0.12UH R1193 0R05 1/16W C1173 NC/5P6 50V C1172 NC/220pF 50V R1199 NC/49.9 OHM 1/16W 1% NC/150R 1/16W 1% R1201 R1202 NC/49.9 OHM 1/16W 1% C1169 NC/220pF 50V C1165 R1192 3 10N 50V C1167 51R 1% 51R 1% R1198 R1194 NC/0R05 1/16W 10N 50V C1171 NC/10N 50V C1174 R1200 NC/0R05 1/16W NC/10N 50V C1175 R1203 NC/0R05 1/16W TU_FAT_IN2Q1002 BC857C R1220 2 T2_IFAGC
1

AGC:OFF(analog), ON(digital)

R1190

RF_AGC_Control

C1187 NC/100N16V

GPIO 7

100K 1/16W 5%

GPIO_6

DIF1_OUT1

R1245 0R05 1/10W

NC

To MT5366
TU_FAT_IN2+ MT5135ADR1184 10K 1/16W 5%

DIF1_OUT2

R1223 0R05 1/10W

R1197 0R05 1/16W

NC/220pF 50V

NC/0R05 1/16W

C1168 NC/220pF 50V

IF_AGCT

10K 1/16W 5% R1185

IF_AGC

To MT5135
MT5135AD+

From MT5366
C1162 47nF 16V

C1161 47nF 16V

BPF need NC for SAWless tuner

2011-12-19

Tuner

715G5155
19230_514_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-16 DVB T2 Demodulator MN88472

TPM9.1E LA

10.

EN 63

B16

DVB T2 Demodulator MN88472

B16
DVDD3V3 DVDD3V3

I2C to TUNER

R1520 4K7 1/10W 5%

R1521 4K7 1/10W 5%

T2_TUNER_SCL T2_TUNER_SDA

R1522 0R05 1/10W R1523 0R05 1/10W

T/C/T2_TUNER_SCL T/C/T2_TUNER_SDA

DVDD3V3 R1269 0R05 1/10W

3V3_IO DVDD3V3 DVDD3V3 T2_IFAGC

R1510 10K 1/16W 5%

AGC_I
88471_TEST3 1V2 1V2 1V2 T2_OXTALO T2_OXTALI 88471_INT 3V3_LM 3V3_IO

ANALOG POWER 1V2 form AVDD3V3


2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 GND AVDD1V2 1V2

R1511 NC/4K7 1/10W 5% 3V3_LM 88471_SADR

R1512 NC/4K7 1/10W 5%

C1515 1uF 16V

C1546 100N 16V

R1270 0R05 1/10W 3V3_AD R1271 0R05 1/10W

88471_TEST3

VSS5

VSS4

TEST2

TEST1

SHVPP

TEST0

TEST3

VDDH2

VDDL3

VDDL5

VDDL4

SHVDDH

VSS3

XO

XI

INT

R1513 4K7 1/10W 5%

R1514 4K7 1/10W 5%

U1003 MN88472

30

31

28

25

21

23

29

19

32

27

18

26

24

22

20

17

DVDD3V3 R1515 NC/4K7 1/16W 5% R1517 CSEL0 4K7 1/16W 5% T2_RESET 1V2

15,16 T/C/T2_TUNER_SDA 15,16 T/C/T2_TUNER_SCL 15 Parallel_TSCLK 15 Parallel_TSVALID 15 Parallel_TSSY NC 15 15 15 15 15 15 15 15 Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

T/C/T2_TUNER_SDA T/C/T2_TUNER_SCL U1007 AVDD3V3 Parallel_TSCLK Parallel_TSVALID Parallel_TSSY NC Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7 G1117T63Uf 3 VIN VOUT
GND TH

R1532 0R05 4A 1/4W R1531 0R05 4A 1/4W


10UF 10V

T2_RFAGC

AGC_R R1509 NC/10K 1/16W 5% T2_AINP C1514 NC/100N 16V T2_AINN 3V3_AD C1526 100N 16V

33 34 35 36 37 38 39 40 41

AVSS AIP AIN AVDD VRB VRT IR TCPO XOUT VDDL6 MSDA VSS6 MSCL VDDL7 VDDH3 AGCR
HDVDDH HDVPP0 HDVPP1 VDDH4 TSDO0 TSDO1 TSDO2 VDDL8 VDDL9

GPO(CSEL1) CSEL0 NRST VDDL2 SDA SCL VSS2 SADR VDDL1 TSDO7 VDDH1 TSDO6 VSS1 TSDO5 TSDO4 TSDO3
E-PAD

16 15 14 13

R1527 4K7 1/16W 5%

(0mVr)

2 (0mVr)

12 T2_DEMOD_SDA 11 T2_DEMOD_SCL 10 9 8 7 6 5 4 3 2 1 T2_TSDATA5 T2_TSDATA4 T2_TSDATA3 88471_SADR 1V2 T2_TSDATA7 3V3_IO T2_TSDATA6

R1530 NC/120R 1% 1/10W

C1258

C1547 10UF 10V

C1503 10UF 10V

C1504 10N 50V

C1541 100N 16V R1519 10K 1/16W 5%

R1529 0R05 OHM

Vo=1.25 x (1+1R/120R) = 1.26V Vo=1.25 x (1+0R/NC) = 1.25V

4 4

OSCL2 OSDA2

OSCL2 OSDA2 T2_RESET T2_IFAGC T2_RFAGC 88471_INT T2_AINP T2_AINN

1V2 1V2 T2_TUNER_SDA R1524 0R05 1/16W R1525 0R05 1/16W 1V2 3V3_IO AGC_R 42 43 44 C1516 100N 16V C1518 100N 16V C1519 100N 16V C1520 100N 16V C1521 100N 16V C1522 100N 16V C1523 100N 16V C1533 100N 16V C1534 100N 16V T2_TUNER_SCL 45 46 47 48

13 T2_RESET 16 T2_IFAGC 16 T2_RFAGC 13 88471_INT 16 T2_AINP 16 T2_AINN

TSCK

VSS7

VSS8

49

50

51

52

DEN

PCK

3V3_IO

54

55

56

57

59

60

61

62

64

VSS9

AGCI

C1501 10UF 10V

C1531 10N 50V

C1532 100N 16V

C1535 100N 16V

C1536 100N 16V

C1538 100N 16V Parallel_TSSY NC Parallel_TSVALID Parallel_TSCLK 1 2 3 4

RP1500
T2_TSDATA0 T2_TSDATA1 T2_TSVALID T2_TSSYNC T2_TSCLK

3V3_LM

3V3_IO

AGC_I

8 7 6 5

T2_TSSY NC T2_TSVALID T2_TSCLK

T2_TSDATA2

47 OHM 1/16W 5% 3V3_LM Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 1 2 3 4 RP1501 8 7 6 5 47 OHM 1/16W 5% RP1502 3V3_AD Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7 1 2 3 4 8 7 6 5 T2_TSDATA4 T2_TSDATA5 T2_TSDATA6 T2_TSDATA7 T2_OXTALI C1537 10UF 10V C1539 100N 16V C1540 10N 50V 47 OHM 1/16W 5% T2_TSDATA0 T2_TSDATA1 T2_TSDATA2 T2_TSDATA3

C1543 10N 50V

1V2

C1545 10N 50V

C1500 10UF 10V

C1527 1uF 16V

C1528 100N 16V

C1529 10N 50V

1V2

65

53

58

63

T2_DEMOD_SCL X1500 20.5MHz


4

R1516 0R05 1/16W

OSCL2

C1542 NC/10PF 50V 3 R1526 0R05 1/16W T2_OXTALO T2_DEMOD_SDA R1518 0R05 1/16W OSDA2

1
2

From MT5366

DVB-T2 parallel TS to MT5135

C1524 NC/18pF 50V

C1525 NC/18pF 50V

C1544 NC/10PF 50V

Demodulator I2C

2011-12-19

DVB T2 Demodulator MN88472

715G5155
19230_515_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-17 SSB layout top

TPM9.1E LA

10.

EN 64

R4021 R4022

CN4012
U4004
R4099

R4070

R4069

R4211

R4212

C4038

CN6005
C6076 C6082

CN4005

R7020
C7034

U7005
TP7002

C4036

C7038

R6046 C6078

C6079

CN4010

C4074

TP7001

R4089

C6077

C6031

R6035

U7008
C1082 C1094 R1163 C1089
C1095 R7238 R7237

R1161
C1088

R7005

R6045

R4025

R4103

C4041

R4024

RP4011

TP7003

R1221 C1196 R1219 C1085

C1086 R1228 R1230

R1111

U7002

TP7004

R7024

CN7001
C7007
TP7006

R4003

RP4007

R7041

U4002

R4001
C4008

C1103
R1217 R1218 C1195 C1087 C1201 R1227 R1226 C1194 R1214 C1081 R1122 R1146 R1125

C1084

Q4003

C1105
C1092

RP4005

R7007

R7027 R7009

R4209

C7008

C1099

C1093

R7004

C1083 R1216

R1164

FB7003
TP7007

U4003

RP4001 TP4009

C4010
TP4002

R1157 R1224 C4040

C7023 C7017

C7030

C7021

RP1502

RP1500

TP7005

U7003
R7042

R4044
R1110

R1532

R4043

RP1501

TP4003

R1160

FB7002

R4018 R4014 C4006

R4028

C4042

C1091

L7001

C1501

C7025

R1269

R7010

R1270
C1538

R1531
C1504

R1009 C1008
R7018 C4059

R1254

C1500
C1521 C1536

R7043

R4036

C7016

C7037
Q7008

CN4002

R4057

C1534

C1529

R4034 R4033 R4032 R4035 R4031 R4039 R4040 R4041

C7012
R7015

U7004
C7015

R7016 R7019 R7028

TP4025

R4106

TP4024

R6058 C6098 R6061 C6100

R1271

C1516 R1517

C6003

R4049 R4107
C4154

R6007

50

FB7004

03

R4048
R
C4151

C5011

C6004 C6002 R6019

C6009
R6012 C6018 R6023 R6024

C1537
R6002 R7031

C1532

C1258

C1523 C1522 C1546

C7011
Q7003

U6001

C6020

R5002

C5009

C6016

R6022 C1002 C4051 R6053 C6038 R6021 R6005

RP4020

RP4019

R7011

R7234

R7017

R1084 C1058

R1085 C1059

R1002

R4054

C6008

C1171

C7033

R6098

C1054

R1194

C4044 C4045

FB6004

FB6006

C6081

C1061

TH4002

C1057

C1044

C1013

R1091 C1064

C1014

C1052

C1019

C1029

R5066

R1088

C1172 C1165

C1062 R1089

C1022

C1050

C1169

C1168

R1023

R1019

R1040

R1029

R1076

R1071

R1083

R1079

R1063

R1013

R7236

C6056

C1164 C1173 L1008


R1193

C1203 C1202

L6003
C6057

X4002
L1007

C1010

R1195

L1006 L1001
R1191 C1166 R1197 C1170

R1245 R1223

CN6002

R6097

R6094

R6093

R1075

C6043
C6075
C6108

C4085

C6083

U7007

U4012

C6085

C1167

C6042

R4053

C4050

C6014

C6022

R1527

C1541

R4058

C7013

HS3

R1521

C1527

R4023

R7029
R4011

U4001

R1522 R1523

C1535

C4053

HS2

HS1

R1520

C1519

C1518 C1520

C1531 C1533

C1503

C1528

C1096

R7003

R4007

C7004

R4210

R4123

RP4003

C1098

R4019

C1104

C4011

R1166

R1162

R7040

C7002

R4012

R4045

R4027

Q7006

R4102 R4013

RP4009

C7022

R7039

C4158

RP4010

C1102

R1149

RP4012

R6036

C7029

C1106 R1156

C1109

C7027

CN1007

R4118 R4113

CN4001

92 11 8 R 9 11 R

C6050

Q1501

Q1500 R1502

R4115 R4116

R1183 R1182

C1158 C1157

R1501

C7031
R6062 FB6009 C6048 R6026 C1047 R1066 C1055 R1103 R1099 C1056 R4079 R1080 R1078 R1081 R1082

CN4009

C4083

TU1003

R6086

U7006
FB1037 C1187 C1186 R1187

R4162

R4164

C4155

R4175

C4156

R4179

C6054

C6041
C6080 C6049
C6067

C6001

R4082 R4081
Q1105 R4080

C6071

C4080

C6044
C6066
C4149 R1229 R1094 C1067 R1097 C1069

CN4008

R1064 R1068
C1046 C1045 R1065

R4157

D1008

ZD1100

ZD1101

R1215 C1189

R1087

C1197
R1210

C1163

FB4006

C6058

L6004

R6078

R4114

C6060

R4156 R4185 R4187

C1063 C1060 C1065 R1090 R1086 R1092

C6019

Q1104

C6063

U4011

TH1300

R1104

R1101

U6002
C6062 C6073
C6064

C6065

R4154

U4010

C4135

CN1006

C1160

CN4007
R4074 R4075

C6068

R4186 C6061 R4188 R4182 R4189

R4169

R4166

R4177

R4165

R4160

C6069

R6027

R6100

C6072

R6056 R6091

C4138

C6089

C4139

C6070

C6032

R4191 R4192 R4183 R4184

C4152

R4167

C4148

C6055 C6053

C4147

CN1001
R4076 U5015 FB4003

R6085 R6087
C6102 C6087

R4077

C6021

L6001
R6099
C6086 C6084
C6107

C6090
C4150 FB4007

X4001
R1022 R1021 C4133 C4142 C4137 C4136 C4134 C4132 R1018 C1018

C1188

CN1005
Q6002 FB6003 R6029

U4009

C6011
R6090

C1191

C1190

R1042

C1198 R5058

R4078

C6106

C1037

R1051

C1036

R1050

C1199 R1043

C6026

C4067

CN6003
D5008

TH4001
D5002

R4171

R4172

R4190

R5060 R4161 R4163 R4173 R4174 C4143 Q5002 R5059 C5017 R5025 Q5007

R5027 R5021 R5082

C6051
R6096

D5007
R5011 R5006 R5042

C5015

R5034
R5040 C5014

FB5005

D5012

C6052

Q5006 R5046 R5064 R5051

C5013

D5004 C5010
FB5003 FB5004

R5036 R5035
U5004 U5005

R5071

C6088

D5006 ZD5002

CN5004

CN5002

ZD5004
U5013 R5052 R5045

U5011

R5068 U5009

R5067 R5031 R5032

L6002

C4144

Q1008

U5014

R4168

U5016

U5008

C5016

R5038

R1060

R1061

R5065

ZD5003
R5033

R1054 R6030

R5037

R5069

C6103

C6105
R4064 R4063 C4066
FB4002

U5003
R5005 R5054 R5055 R5056 R5057

C4061

C4007

C4064

C4062

R4060 R4059

CN4003

R4010

R4068 R4067

CN4004
SSB layout top
715G5155

U5006

CN6004

CN4011

CN1002

R1053

R5020 R5019

R5029

C6104

R5053 R5047

C5018

R5022

FB5002

R5070

R5026

D5005

Q5005

CN5003

R 50 81 80 R R 50 R 50 R R 50 62 R R 50 63 R 50 75 74 50 77 76 50 R 50 78 50 79

R 89 60

2011-12-22

19230_516_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-1-18 SSB layout bottom

TPM9.1E LA

10.

EN 65

R4112

R4111

C4071 C4046
R4101 R4098

R4087

C7039

R7035

R4085

C4078

R4097

FB4004 FB4005

R7037

R4086

R4109

R7036

C7040
R7038

C1072

R1106

R1137

R1136

R1135

R1134

R1131

R1108

R7032

R1145 C1076

R4090
R4100 R4095

R1109

Q4002

R4110

C1077

FB1015

R1123 R1128 C1075

R4108

R1124

Q7004

Q7005

R7030

R7026

Q4001

C4031

C4159

C4025

C1185 R1212

U1006

C4032

C4082

C4001

R1148

TP1001

RP4004

R1153

C4030

C1078

R1152

C1090

R1116 R1115

R1130

C7003

R1151 R1133 R1141 C1097 R1107

U4005
R4042

C4004

R1150

R1117

C4016

RP4006

C1079

R1119
RP1002

R4017

C4037

R4020

C4035

C4033

C4009

R4093 R7008

U1005

R1118

R4120 R4122

C4024
RP4002

R7002
C4019 R4121 C4020 C4029

Q7002
C7005

R7025

R1143 R1142 R1140

R1144

X1001

R1225

C1200

R 12 R 12 00 03 C 11 74 C 11 75

R1132

C4048

U1007
R1530 R1529

C1515
C1514 R1509

C4077

R4006

R1008
R1185 C1162 R6015 C6010

U4008
TP6001

C4026 C4012 C4058

R7014
C7010
R4016

C7006

R 11 R 12 99 02

R1510

C4073

C4003

R4009

C1545

C1543

C4017 C4015

R4091 R4096

R1105

C4021

R1159

C4014

C4023

R4084

R4088

R1158

R1138

C4022

C4027

R1113

C1071

C4028

R1139

TP4001

C4039

R7012

R1514
R1516 R1518

R1524

C1544 R1515

R6009 R6006 C6012

C6101

R6064
TP6002 TP6004

TP6006

R1067

C1547

C1542

U1003

R1519 C1526 C1540 C1539 FB6008 FB6007 R1190

TP6005

C4054
C4060 C4055
TP4011 TP1002 TP4010

C6099

R6060

R4055 R4056
TP6003

R1010

R7046
R4083

R6013

R6010
C6006 C1005

C7036
R4046 R4047 R4037
R7235

C1007

R1186

FB6002

C4075 C1004

R6014

R1220

C1507

R1526

C1513

R1513

C1006

C1003

R1511

C1524

C1525

U6003
C6015
R6017 C6017

C4052 C4049

Q1002

R4094

R1006

R6016

R6011

R1188

R7034

C7032

R1528 R1506 R1508 R1184

R4029 R4030

C6007

R1004

R7021

C1508

C1511

C4076

R1003

R4104

L1500

R1001 C1001

R6075

C1161

D6005

R1505

R1507

D6004

C1509

R1007

C4072

R4052

R6074

Q1001

U4007

C4043

R4038

X1500

R6004

R1005

R7047

R4015

TP4008

R6073

R6082

C7035

R6071

R7033

R6069

R6070

R1222

R1244

R4051 R4050

D6001

D6003

R6076

R6077

Q6001

R1180

R1181

FB7005
FB

C7019
96

Q6003

R6068

C7018
93
C7020

10

R1211 L1003
R6034 C1048 R1205 R1207 C1070

C1066

10

C1068

Q1153

FB1006

FB1007

R1100

R1234

FB1011

FB1013 D4005

Q1012

Q1009

R4170

R1206

R1208

C7028
C1159
FB1034 R7239

R1062

R1209

D4001

R1165

R4181

C4140

R1102 R1167 Q1013

C4141

C4153

D7001

R4117

U1004
D1009

R4105

C4146

U1000

C4145

R4155 R4178

C7014

R1512

R1525

R7044 R7045

C4047

C4056

Q7007

R4026 C4057

C7009

R1129

R7022

R7001

C7001

C4002

Q7001

C7024

R1120

C7026

R7023 R7006
C6040 C6074

RP4008

R1213

R1114

C4034

C4081

FB4100

R1121

FB7006

TP1003

C4157

R7013

R4092

C4068

R6055

C6037 R1070 R1074 C1051 R6092

R6054

R6051
R6047 R6049 R6048 R6039 R6050 C6027 R6018 C6005 R6003

U6004

C6028

C4069
C4070

C6034 C6036 C6029 C6023

R6040 C6030 R6080

R1073 R1069

C1110

C1073

FB1005 R6031

C6039 R6028

R5061 C1028

C6025

C6035 C6033

R6079 C6024 R6032 R1077

R1037 R1038 C1027 R1034 R1028

C1053
C1193 R5049 R1072

U5010

R4072 R5030

D5010
R5028

C1049
C1192 R5044 R5050 R1058

ZD5001

C5002

C5004

R5072

R5015
R5008 R5004 C5006

C5012

R5024

R5023

R5018

U5007

R5017

FB5006

Q5003

D5011

ZD1027

R5007

C5008

R5039

R5009

D5009

R5048

D6002 R5016 D5003

C1040 R1056

R5043

Q5004

R5073

R5010 R5013 R5012 R5014

C5005 C5003

R6072

R1059

Q1006

C1043

R5041

R6033

R1055

R4061

C4063

C4065

R4062

C5007

R4066 R4065

U5012

C6111 C6112

C6110 C6109
R6095

C6059

01 12 R

60 05

2011-12-22

SSB layout bottom

715G5155
19230_517_120207.eps 120207

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts 10.2 B 715G5163 DVB-S2 /T/C SSB 3000/3500 series
10-2-1 System Power 1

TPM9.1E LA

10.

EN 66

B01

System Power 1
ANALOG POWER AVDD1V2 from AVDD3V3
AVDD3V3 AVDD1V2 U702 +5V_STB FB700 120R/3000mA
NC/100UF 16V ADJ(GND)

B01
DVDD3V3 3V3SB +5V_STB 5135_DV10
100UF 16V

DVDD3V3 3,4,5,6,7,10,11,12,13,14,15,16,17 3V3SB +5V_STB 3,4,5,6,7,11,14 3,4,5,7

DC POWER INPUT
BRIGHT_ADJ: Normal:Max:+3V3, Min:0V Stand_By:0V INVERTER_ON_OFF: Normal: High Stand_By: Low
INVERTER_ON_OFF BRIGHT_ADJ +12V

STB_PWR5V 3 C718 + C701 + 220UF 16V C703 NC/100N 16V

AP1117DL-13 VOUT 2 C716 +

VIN

5135_DV10 15 +12V_DET 13 OPWRSB 4 BRIGHT_ADJ 11 INVERTER_ON_OFF 11 GND 3,4,5,6,7,8,9,10,11,12,13,14,15,16,17

1 FB701 1

2 120R/3000mA 2

+12V_DET OPWRSB BRIGHT_ADJ INVERTER_ON_OFF

CN700 1 2 3 4 5 6 7 8 9 10 11 12

STANDBY: Normal: High Stand_by: Low


+5V_STB 3V3SB

TP700 TP701 TP702 TP703 TP704 TP705 TP706

R710 NC/1K1/16W

R709 10K 1/16W 5%

+24V R703 NC/100OHM1/16W STANDBY STB_PWR5V 10K 1/16W 5% R702 NC/10KOHM +-5% 1/8W C700 NC/22uF 10V R723 100OHM1/16W
POWER_ON

TUNER POWER +5V_TUNER from +12V


Q702 BC847C R707 R721 NC/10K 1/16W 5% OPWRSB +12V 1 C717 +
100UF 16V

+5V_TUNER U701 AS7805DTR-E1 3 IN OUT


GND

D701 2 1

+5V_SW

CONN

STAND_BY: Normal: Low Stand_by: High

+ C726 100N 16V SMD/0402

C725 330NF 16V

C720 33UF 10V

NC/SCS0520P

VCCK FB702 220R/2000mA 1 2 16 1 2 15 6 7 8 9


180K 1%

5135_DV10

+5V_STB L700 U700 TPS54319RTE VIN PH VIN PH VIN PH EN BOOT VSNS PWRGD COMP GND RT/CLK GND SS AGND
PwPd 17

C713 10uF 6.3V 4.7uH 10 11 12 13 14 3 4 5 C709 100N 16V R712 1K5 1/10W 1% C710 10uF 6.3V

C714 10uF 6.3V 1

FB703 2 120R/600mA C706 100N 16V

C712 10uF 6.3V

C711 100N 16V

C708 10uF 10V

R711
1K5 1/16W 5%

+5V_SW

DVDD3V3

R715 C707 10N 50V

R714 11K 1/10W 1% 3 C719 +


100UF 16V

U703 G1084-33TU3Uf VIN VOUT


GND

2 C721 +
100UF 16V

R708 0R05 1/16W STANDBY C704 22N 25V C715 1uF 16V

R713 33K 1/10W 1%

C727 100N 16V

Vout=0.827x (1+12.5K/33K) = 1.14V

+5V_STB

+5V_SW +12V Q701 8 7 6 5 D D D S D D D G 1 2 3 4 C724 +


NC/100UF 16V

DVDD3V3 +5V_SW AVDD3V3 R718 NC/100K1/16W +12V_DET


100UF 16V

R704 33K 1/10W

R717 1K 1/16W 5% 3 POWER_ON 10K 1/16W 5% Q703 BC847C R720 R722 NC/10K 1/16W 5% OPWRSB C723 +
100UF 16V

U704 G1084-33TU3Uf VIN VOUT


GND

VCCK(+5V_SW ON/OFF): Normal: High Stand_By: Low


C702

2 C722 + R719 NC/39K 1/16W 5%

AON4421

2.2uF 10V

R705
3

VCCK

R706 2K7 1/16W 5% C705 1uF 16V

2
1

22KOHM 1/10W Q700 BC847C

STAND_BY: Normal: Low Stand_by: High

+5V_STB TO +5V_SW BY VCCK


System Power 1
715G5163

2012-02-06

19230_518_120209.eps 120209

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-2 System Power 2

TPM9.1E LA

10.

EN 67

B02

System Power 2
PANEL_VCC_ON/OFF GND

B02
13 PANEL_VCC_ON/OFF +5V_SW +12V PANEL_VCC

Panel VCC=12V

+5V_STB TO DV33SB
+5V_STB 3V3SB

2,4,5,6,7,8,9,10,11,12,13,14,15,16,17 GND

17 R769 NC/0R051/8W 8 7 6 5 R768 0R051/8W

TUNER_LNB

TUNER_LNB DISEQC_OUT DISEQC_IN S2_DEMO_SDA S2_DEMO_SCL

17 DISEQC_OUT 17 DISEQC_IN 17 S2_DEMO_SDA 17 S2_DEMO_SCL

Q750 D D D S D D D G 1 2 3 4
NC/100UF 16V

U750 G1117-33T63Uf 3 C753 + C752 1UF16V VI


GND

VO

2 C755 10UF 25V

PANEL_VCC ON/OFF:(GPIO16) Normal:High Stand_By:Low

R752 10K 1/10W 5%

AON4421 C750 1UF16V

2,4,5,6,7,11,14 3V3SB +5V_STB DVDD3V3 +5V_STB DVDD3V3

3V3SB 2,4,5,7 2,4,5,6,7,10,11,12,13,14,15,16,17

R753 7K5 1/10W 5% R751 5.1KOHM +-5% 1/10W

PANEL_VCC_ON/OFF R750 10K 1/16W 5%

Q751 BC847C

C751 4.7UF 10V

ADAC_PWR

AVDD3V3

R754 0R05 1/10W

LNB Power Supply


+12V FB750 1 120R/3000mA L750 2 22uH FB340M + C754 C758 0.47UF 50V C762 10N 50V R766 10K OHM +-5% 1/8W
2

R756 20K5 1% 1/8W D750 1 2 150UF 25V 2 D751 FB340M 1 TUNER_LNB

ZD750 NC/PJSD24CW

R757 100 OHM 1/4W

32

31

30

27

26

33

29

28

25

U751 LNBH23QTR

Epad

ISEL

VCTRL

VUP

NC

NC

NC

DETIN

NC

C766
2

R770 1R 1/8W 5% 10uF 25V C767 10N 50V

1 C761 100N 16V C763 220N 25V 2 3 4 5 S2_DEMO_SDA R758 100R 1/16W 5% 6 7 8

NC NC NC LX P-GND SDA NC
DSQIN

NC NC VoTX VoRX A-GND VCC VCC-L


DSQOUT

24 23 22

D752 BAT43W
1

21 20 19 18 17 C765 220N 25V

R761 15R 1% D753 BAT43W L751 220UH

NC
ADDR SCL

NC
EXTM BYP TTX NC

13

10

11

12

14

15

S2_DEMO_SCL

R755 100R 1/16W 5%

DVDD3V3 R759 NC/0R05 1/16W C764 220N 25V

R767 4K7 1/16W 5%

R763 10K 1/16W 5%

DISEQC_IN

R760 0R05 1/16W R762 0R05 1/16W R764 NC/0R05 1/16W

DISEQC_OUT

R765 NC/0R05 1/16W

R771 0R05 1/16W

16

C759 10uF 16V

C756 100N 16V

2012-02-06

System Power 2

715G5163
19230_519_120209.eps 120209

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-3 Peripheral

TPM9.1E LA

10.

EN 68

B03
MT5366
10K 1/16W 5% R4001

Peripheral
DVDD3V3 U401A JTCK JTDI JTDO JTMS JTRST# OSDA0 OSCL0 OSDA1 OSCL1 OSDA2 OSCL2 OXTALI OXTALO AVDD33_XTAL_STB R4 T1 R3 T3 T2 J22 J23 U4 U3 T22 T23 AE19 AD19 AC18 AE18 AA7 W8 AB15 AA17 AA12 A25 B25 Y 21 Y 22 AB22 AA23 AB23 AC23 AB24 AA20 Y 20 W20 Y 19 W19 M9 H6 N9 L12 L13 L14 P9 R10 W21 AC24 AB25 M11 M12 M13 M14 M15 M16 N11 N12 N13 N14 N15 N16 P11 P12 P13 P14 P15 P16 R11 R12 R13 R14 K12 K13 M10 N10 P10 K14 K17 L17 N17 P17 W17 V19 JTCK JTDI JTDO JTMS JTRST_ OSDA0 OSCL0 OSDA1 OSCL1 OSDA2 OSCL2 XTALI XTALO AVDD33_XTAL_STB AVSS33_XTAL_STB AVDD33_VGA_STB AVSS33_VGA_STB AVDD12_PLL AVSS12_PLL AVDD10_LDO DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS DVSS VCC3IO VCC3IO VCC3IO VCC3IO VCC3IO VCC3IO T8 M18 H19 V8 U8 N18 VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK VCCK M1 M2 M3 M4 M5 M6 N1 N2 N3 N4 N5 N6 K10 K11 K9 L9 R9 K15 K16 L10 T9 T10 T11 T12 T13 T14 T15 T16 L11 L15 R15 L16 R16 R17 T17 U0TX U0RX U1RX U1TX POWE_ POOE_ POCE1_ POCE0_ PDD7 PDD6 PDD5 PDD4 PDD3 PDD2 PDD1 PDD0 PARB_ PACLE PAALE OPWRSB ORESET_ R4042 AVDD12_PLL 1.3K 1% AVDD10_LDO OIRI FSRC_WR AB8 AC7 U2 U1 J19 K21 K22 J21 K23 L23 L24 L25 K20 K19 L22 M23 J20 J24 J25 AB9 Y8 AC8 E23 POWE# POOE# POCE1# POCE0# PDD7 PDD6 PDD5 PDD4 PDD3 PDD2 PDD1 PDD0 PARB# PACLE PAALE OPWRSB ORESET# K9F2G08U0B-PIB0 RC6 FSRC_WR DVDD3V3 4.7K1/16W R4006 DVDD3V3 DVDD3V3
1K 1/16W 5% R4014 R4009 R4010 R4011 R4012 R4013

B03
DVDD3V3 U0TX U0RX 4.7K1/16W R4007 R4015 4.7K1/16W DVDD3V3 POCE0# DVDD3V3

NAND Flash

U4051 NC NC NC NC NC NC RB R E NC NC VDD VSS NC NC CL AL W WP NC NC NC NC NC NC NC NC NC I/O7 I/O6 I/O5 I/O4 NC NC NC VDD VSS NC NC NC I/O3 I/O2 I/O1 I/O0 NC NC NC NC 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25

DVDD3V3 +5V_STB OSDA1 OSCL1 RC6 U0TX U0RX

2,3,5,6,7,10,11,12,13,14,15,16,17 2,3,5,7 7 7 5 5,10 5,10

+5V_STB

3V3SB R4008 0R05 1/10W U410 3 GND Vcc RESET AZ809ANSTR-E1 ORESET# 1 2

R4004 4.7K1/16W

(20mA Max.)
100N 16V C4001

DVDD3V3

3V3SB NC/4.7K1/16W R4036

3V3SB

AVDD33_REG_STB

R4041 NC/4.7K1/16W

1 2 3 4 DVDD3V3 5 4.7K1/16W 6 R4043 PARB# 7 POOE# 8 R4005 POCE1# 9 10 4.7K1/16W 11 VDD_NAND 12 13 14 C4003 15 NC/1uF 16V PACLE 16 PAALE 17 DVDD3V3 POWE# 18 R4002 Flash_WP# 19 20 4.7K1/16W 21 22 23 24

+5V_STB OSDA1 OSCL1 RC6 U0TX U0RX OPWRSB OPCTRL4 OPCTRL5 AOSDATA1 SY S_EEPROM_WP

R4037 NC/3K9 +/-5% 1/16W PDD7 PDD6 PDD5 PDD4

VDD_NAND
100N 16V C4002

R4038 NC/10K

OPWRSB 2 OPCTRL4 13 OPCTRL5 13 AOSDATA1 6 SY S_EEPROM_WP 13 GND 2,3,5,6,7,8,9,10,11,12,13,14,15,16,17

PDD3 PDD2 PDD1 PDD0

R4016 100K1/16W

OSDA0 OSCL0 OSDA2 OSCL2 3V3SB OSCL1 OSDA1

OSDA0 OSCL0 OSDA2 OSCL2 3V3SB OSCL1 OSDA1

5,14 5,14 16,17 16,17 2,3,5,6,7,11,14 7 7

Reset IC

POOE#

NAND 256MB

C4004 4.7uF 10V

10K 1/16W 5%

10K 1/16W 5%

10K 1/16W 5%

10K 1/16W 5%

10K 1/16W 5%

TVTREF#1

JTRST# JTDI JTMS JTCK JTDO R4017 33 OHM 1/16W


R4018 10K 1/16W 5% R4019

JTAG_DBGRQ JTAG_DBGACK
10K 1/16W 5%

1 2 3 4 5 6 7 8 9 10 11 12 NC/CONN

14

13

CN406

System EEPROM
3

R4020 4K7 1/16W 5%


4K7 1/10W 5% R4021 4K7 1/10W 5%

DVDD3V3

SY S_EEPROM_WP C4023 NC/1uF 16V

R4022

2 Q4000 R4040 10K 1/16W 5% BC847C R4000 4K7 1/16W 5%

C4022 1uF 16V U409 8 7 6 5 VCC A0 WP A1 SCL A2 SDA VSS 1 2 3 4

HI = > Disable w rite LO = > Enable Write

OSCL0 OSDA0

CAT24C128WI-GT3

MT5366IVGG

27MHz Crystal
X4001 27MHz OXTALI 1 C4006 27P 50V 2 OXTALO

3.3V IO Power
DVDD3V3

C4005 27P 50V

C4007 NC/4.7uF 10V

C4008 100N 16V

C4009 100N 16V

Starpping Analog Power


3V3SB R4029 0R05 1/10W AVDD33_XTAL_STB 3V3SB R4030 0R05 1/10W C4013 10uF 10V C4010 100N 16V C4011 100N 16V C4012 100N 16V R4025 4K7 1/16W 5% R4026 4K7 1/16W 5% AVDD33_REG_STB AVDD1V2 R4031 0R05 1/10W AVDD12_PLL

3V3SB R4023 NC/10K 1/16W 5% OPCTRL5 R4024 10K 1/16W 5%

2nd I2C
DVDD3V3 DVDD3V3 R4027 NC/10K 1/16W 5%

R4028 10K 1/16W 5% OPCTRL4

DVDD3V3 R4032 10K 1/16W 5% AOSDATA1 R4033 NC/10K 1/16W 5%

Core Power
VCCK

OSDA1 OSCL1

NC/100UF 16V

C4021 +

3rd I2C
C4014 4.7uF 10V C4015 100N 16V C4016 100N 16V C4017 100N 16V DVDD3V3 DVDD3V3 R4034 4K7 1/10W 5% C4018 100N 16V C4019 100N 16V C4020 100N 16V OSDA2 OSCL2
1 2012-02-06

R4035 4K7 1/10W 5%

Peripheral

715G5163
19230_520_120209.eps 120209

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-4 Connector & USB

TPM9.1E LA

10.

EN 69

B04

Connector & USB


DVDD3V3 DVDD3V3 +5V_STB 2,3,4,6,7,10,11,12,13,14,15,16,17 USB_DP1 USB_DM1 +5V_STB 2,3,4,7 Light_Sensor R4052 3.9K1/16W KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE 3V3SB 3V3SB LED_R 2,3,4,6,7,11,14 LED_G RC6 LCD_clock_SCL LCD_clock_SDA USB_PWR_EN0 USB_OC_COM0 USB_DP0 USB_DM0 U0TX U0RX USB_PWR_EN1 USB_OC_COM1

B04
3V3SB 3V3SB USB_DP1 USB_DM1 Light_Sensor 13 11 11

TO KEY PAD BOARD TO IR/KEY BOARD


R4053 3.9K1/16W

LED_G: Enable: High Disable(Stand_By): Low LED_R: Enable(Stand_By): High Disable: Low
R4076 16K 1/10W 5% R4073

KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE

R4054 100R 1/10W 1% 100R 1/10W 1% R4055


C4051 100N 50V C4052 100N 50V

Key 1 Key 2

NC/1K 1/10W 3V3SB LED_R LED_G RC6 Light_Sensor R4075 R4077 R4072 R4074 100 OHM 1/10W 16K 1/10W 5% 100R 1/10W 5% NC/100 OHM 1/10W
NC/10N 50V C4064

LED_G: For flash function when press remote control


CN401 1 2 3 4 5 6 7 8 9 10 11 12

KEY _UP_DN_DCSW 13 KEY _MENU_L_R_SOURCE 13 LED_R 13 LED_G 13 RC6 4 LCD_clock_SCL 13 LCD_clock_SDA 13 USB_PWR_EN0 13 USB_OC_COM0 13 USB_DP0 USB_DM0 U0TX U0RX GND 11 11 4,10 4,10 2,3,4,6,7,8,9,10,11,12,13,14,15,16,17

USB_PWR_EN1 13 USB_OC_COM1 13 Bathroom_R Bathroom_L

C4061 NC/100N 50V

C4063

C4065 NC/100N 50V

Bathroom_R 6 Bathroom_L 6

---><---|>

USB PORT 1
CN1031 USB CONN
6 ---><---|>

C4062 2.2uF 10V CN4056 1 2 3 4 5

Key 1 Key 2 +5V_SW

---><---|> ---><---|>

NC/10uF 10V

OSCL0 OSDA0 MCHIP_RST# CONN

OSCL0 OSDA0

4,14 4,14

MCHIP_RST# 13

3V3SB +5V_SW

USB_DP0 USB_DM0

R4058 0R05 1/16W R4059 0R05 1/16W


2

4 3 2 1 FB4051 220R/2000mA

+5V_SW

C4053 100UF 16V

4 3 2 1

IR Linked

NC/CONN

For LCD Clock


3V3SB R4082 10K 1/16W 5% 3V3SB
6 1 2

1 TH4051

PTCR
NC/10uF 10V C4055 C4056 NC/100NF 25V

R4060 NC/10K 1/10W

R4083 10K 1/16W 5%

U1051 5 USB_PWR_EN0 IN OUT GND OC

1 2 4 3USB_OC_COM0 EN R4061 NC/4.7K1/16W NC/G5250M1T1U

LCD_Clock_SDA LCD_Clock_SCL

NC/100R 1/10W 5% R4057 NC/100R 1/10W 5% R4056

R4062 NC/4.7K1/16W

U0TX
7

R4065 100R 1/10W 5% 100R 1/10W 5% R4066

DVDD3V3

+5V_STB

1 2 3 4 5

R4063 4.7K1/16W

R4064 4.7K1/16W

NC/BAV99 D4051 3V3SB


3

3V3SB

CN4052 NC/CONN

NC/BAV99 D4054 CN410 1 2 3 CONN

---><---|>

U0RX

---><---|>

CN411

USB PORT 2
6

NC/CONN CN1033 7 CN1032 NC/USB CONN


1 2 3 4 5 6

CN402 OSCL0 MCHIP_RST# 1 3 5 7

NC/CONN 2 4 6 8 OSDA0 +5V_STB

1 3 5 7

2 4 6 8

Bathroom_R Bathroom_L +12V

USB_DP1 USB_DM1

R4069 NC/0R05 1/16W R4070 NC/0R05 1/16W


2

4 3 2 1 FB4052 NC/220R/2000mA

NC/CONN

+5V_SW

C4057 NC/100UF 16V

4 3 2 1

R4193 NC/0R051/8W

R4192 NC/0R051/8W

+5V_SW +12V

1 TH4052

NC/PTCR
NC/10uF 10V C4060 C5058 NC/100NF 25V

R4068 NC/10K 1/10W

U1052 5 USB_PWR_EN1 4 IN OUT GND OC

1 2 3USB_OC_COM1 R4071 NC/4.7K1/16W NC/G5250M1T1U EN

DVDD3V3

R4067 NC/4.7K1/16W

2012-02-06

Connector & USB

715G5163
19230_521_120209.eps 120209

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-5 Audio I/O & SPDIF & Headphone

TPM9.1E LA

10.

EN 70

B05
MT5366
SCART1_R_In SCART1_L_In VGA_R_In VGA_L_In

Audio I/O & SPDIF & Headphone

B05
HP_MUTE HP_MUTE 7 Bathroom_R Bathroom_L HP_DET DVDD3V3 3V3SB Bathroom_R 5 Bathroom_L 5 HP_DET 13 DVDD3V3 2,3,4,5,7,10,11,12,13,14,15,16,17 3V3SB 2,3,4,5,7,11,14

U401F AE25 AB21 AD25 AE22 AC25 AD22 AD23 AB20 AE24 AC21 AE23 AC20 AD24 AC22 AA19 AA21 AA18 C605 1uF 16V AIN0_R_AADC AIN0_L_AADC AIN1_R_AADC AIN1_L_AADC AIN2_R_AADC AIN2_L_AADC AIN3_R_AADC AIN3_L_AADC AIN4_R_AADC AIN4_L_AADC AIN5_R_AADC AIN5_L_AADC AIN6_R_AADC AIN6_L_AADC AVDD33_AADC AVSS33_AADC VMID_AADC ALIN ASPDIF AOBCK AOLRCK AOMCLK AOSDATA4 AOSDATA3 AOSDATA2 AOSDATA1 AOSDATA0 AR0_ADAC AL0_ADAC AR1_ADAC AL1_ADAC AR2_ADAC AL2_ADAC AR3_ADAC AL3_ADAC AVDD33_DAC AVDD33_DAC1 AVSS33_DAC AVSS33_DAC1 Y 23 AA25 W23 AA24 V24 Y 25 V25 Y 24 V22 V23 AA22 W22 V21 V20 T21 U24 U25 R21 R20 T19 U23 T20 AU_DIN SPDIF_OUT AOBCLK AOLRCK AOMCLK AOSDATA4 AOSDATA3 AOSDATA1 AOSDATA2 AOSDATA1 AOSDATA0 AVDD3V3 TP601 TP R602 0R05 1/10W TP600 TP TP602 TP TP603 TP C603 100N 16V AVDD33_AADC AR0O AL0O AR1O AL1O AR2O AL2O AR3O AL3O AVDD33_DAC AVDD33_DAC1 TP604 TP TP605 TP

Analog Power
ADAC_PWR R600 47R 1/10W 5% + C601 100UF 16V C600 100N 16V AVDD33_DAC R601 0R05 1/10W C602 100N 16V AVDD33_DAC1

SCART1_R_In SCART1_L_In

SCART1_R_In 9 SCART1_L_In 9

Y PbPr_R_In1 Y PbPr_L_In1

Y PbPr_R_In1 Y PbPr_L_In1 VGA_R_In VGA_L_In SPDIFOUT SCART1R_PA SCART1L_PA SPDIF_OUT AOSDATA1 AOMCLK AOBCLK AOLRCK AOSDATA0 HP_SC_MUTE SP_AMP_MUTE OFF_MUTE

Y PbPr_R_In1 Y PbPr_L_In1 VGA_R_In VGA_L_In SPDIFOUT

8 8 10 10 8

AVDD33_AADC

SCART1R_PA 9 SCART1L_PA 9 SPDIF_OUT 14 AOSDATA1 4 AOMCLK 7 AOBCLK 7 AOLRCK 7 AOSDATA0 7 HP_SC_MUTE 9 SP_AMP_MUTE 13 OFF_MUTE 7,9 GND 2,3,4,5,7,8,9,10,11,12,13,14,15,16,17 7 7

VMID_AADC C604 100N 50V

HPOUTL HPOUTR

HPOUTL HPOUTR

7 7

AR0O AL0O

MT5366IVGG

AR0O AL0O

SCT Audio Out


R604 30K OHM +-1% 1/16W C606 10uF 10V R607 47K 1/16W 5% 0R05 1/16W R610 NC/100K 1% C609 OPAVREF_R 330PF 50V R611 R613 4.7K1/16W 33P 50V C607

+12V 3

U600 IN

NC/AZ78L09RTR-E1 1 OUT
GND

Earphone R/L output


3V3SB R623 R640 3.9K OHM D600 HP_SC_MUTE 2 1 SP_AMP_MUTE HPOUTL FB601 2 NC/120R/3000mA

C639 NC/10uF 16V

C638 NC/330NF 16V

C637 NC/100N 16V

NC/10OHM1/10W 1 +5V_SW R624 4.7K1/16W R625 4.7K1/16W Q600 BC847C C622 12 NC/2.2uF 10V CPP INR+
HPVSS

AR2O

R605 16K 1%

SCART1R_PA OPAV120

K A BAS316

C618 NC/4.7uF 10V HP_MUTE

OFF_MUTE

R603
4 3 2 1 15 2IN+ VCC2IN- 1IN+ 2OUT 1INVCC+1OUT

Thermal Pad

OUTL

OPAVREF_L OPAVREF_R

AL0O 120R/3000mA FB600

SGND

AVDD

NJM4580M-TE1 U106

20K 1% R609 R612 20K 1% C608 100N 16V C612 10uF 16V R614 100K1/16W

R626
1

EN

NC/1.2K 1/16W 1%

R627 NC/1.2K 1/16W 1%

U601 C619 NC/1UF 10V 1 2 NC/1UF 10V 3 NC/1UF 10V 4 C630 NC/1UF 10V C632 C625

17

16

14

13

100K1/16W

+12V

OPAV120

INLINL+

HPVDD

R628 4.7K1/16W

HP_SC_MUTE

OPAV120

R615 0R05 1/16W OPAVREF_L AL2O R616 16K 1% R620 NC/100K 1% C613 10uF 10V R617 47K 1/16W 5% 33P 50V C614 C615 330PF 50V 30K OHM +-1% 1/16W R618 SCART1L_PA

C620 R641 NC/2N2 50V NC/0R05 1/16W

C621 NC/2N2 50V

11 10 9 C624 NC/1UF 10V

5 6 7 8

OUTR

C611 NC/10uF 16V R619 4.7K1/16W

C610 NC/1uF 16V AR0O

NC/0R05 1/16W R642 C626 NC/2N2R632 50V R631 NC/1.2K 1/16W 1% C623 NC/2N2 50V

PGND CPN

INRG0 G1 7

NC/1.2K 1/16W 1%

NC/TPA6132A2RTER C635
G0 G1

NC/2.2uF 10V

+5V_SW

+5V_SW

R635

R636 NC/10K 1/16W 5% G0 G1 R638 NC/0R05OHM1/16W R608 0R05 1/16W

DVDD3V3

R639

NC/10OHM1/10W HPOUTR

SPDIF OUT
AL1O R621 SPDIFOUT
100R 1/10W 5% ---><---|>

NC/10K1/16W R630 NC/1.2K 1/16W 1% C616 100N 16V SPDIF_OUT 240R 1/10W 5% R629 NC/1.2K 1/16W 1%

Bathroom_L R637 NC/0R05 1/16W

R606 NC/4K7 1/16W 5% HP_DET

CN604 HPOUTR 3

C627 NC/2N2 50V

C636 NC/2N2 50V

HPOUTL C633 NC/10N 50V

2 1 CONN

R622 C617 33P 50V

C628 NC/2N2 50V AR1O R633 NC/1.2K 1/16W 1% R634 NC/1.2K 1/16W 1%

C634 NC/2N2 50V Bathroom_R

C629 100N 50V

C631 100N 50V

2W Bathroom Speaker

2012-02-06

Audio I/O & SPDIF & Headphone

715G5163
19230_522_120209.eps 120209

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-6 Speaker & Sound Woofer

TPM9.1E LA

10.

EN 71

B06

Speaker & Sound Woofer

B06
+24V FB650 220R/2000mA PVDD +5V_STB AUD_V33 3V3SB DVDD3V3 R684 NC/4.7K1/16W AMP_RESET R690 100R 1/16W 5% I2SAMP_RESET OSDA1 OSCL1 OFF_MUTE AMP_MUTE I2SAMP_RESET AOMCLK AOBCLK AOLRCK AOSDATA0 +5V_STB 3V3SB DVDD3V3 2,3,4,5 2,3,4,5,6,11,14 2,3,4,5,6,10,11,12,13,14,15,16,17 1 2 FB652 220R/2000mA 1 + 100UF 35V C690 2 + 100UF 35V C691 OSDA1 4 OSCL1 4 OFF_MUTE 6,9 AMP_MUTE 13 I2SAMP_RESET 13 AOMCLK 6 AOBCLK 6 AOLRCK 6 AOSDATA0 6 GND AL0O AR0O HP_MUTE HPOUTL HPOUTR AL0O AR0O HP_MUTE HPOUTL HPOUTR 6 6 6 6 6 2,3,4,5,6,8,9,10,11,12,13,14,15,16,17

Main Speaker Circuit

C660 1uF 16V

AOMCLK

R656 0R05 1/16W C651

MCLK R654 AL0O C698 1uF 10V R652 16K 1% C693 330PF 50V R691 C699 68pF 50V 18Kohm 1/16W +/-1% HPOUTL R660 10R 1/10W 5% R692 43K 1/16W C672 330PF 50V R693 18Kohm 1/16W +/-1% HPOUTR R661 10R 1/10W 5% 68pF 50V C695 43K 1/16W

AOBCLK

R658 0R05 1/16W

NC/33P50V BICKI C657 NC/33P50V LRCLKI C656

AOLRCK

R659 0R05 1/16W

AOSDATA0

R672 0R05 1/16W

NC/33P50V SDI C655 NC/33P50V AR0O C694 1uF 10V R653 16K 1%

DVDD3V3 FB651 1 2 120R/600mA

AUD_V33HP DVDD3V3 FB653 1 C661 4.7uF 10V 2 120R/600mA C666 4.7uF 10V AUD_V33

AUD_V33HP

100N 16V C663 1uF 10V

NC/1UF 10V

NC/1UF 10V

Sound R/L Circuit


HP_MUTE

C667 C729 C728

PVDD

C676 C688 1uF 10V 1uF 10V

22 OHM 1/4W C680 1uF 10V

21

14

23

17

24

20

22

19

LINEHPOUT_L

SOFTMUTE

LINEHPOUT_R

NC/3.4K 1%

3V3SB

U602 R675 10K 1/16W 5%

16

15

18

13

Mute Circuit
AMP_MUTE: NORMAL: Low MUTE: High
R676 NC/10K 1/16W 5% R677 AMP_MUTE NC/22K 1/16W 5%

DVDD3V3 C671 C730 NC/100N 50V 12 C674 100N 50V 11 10 9 C659 100N 50V 8 7 6 5 C654 100N 50V 4 3 OUT2B 2 C681 100N 50V 1 C739 100NF 25V R664 6.2 OHM 1/4W C697 1UF 50V OUT2A PVDD 32 33 C673 34 2.2U10V 35 MCLK 36 EAPD/FFX4A TWARNEXT/FFX4B VREGFILT AGNDPLL MCLK VCC2 GND2 OUT2B VSS_REG R657 22 OHM 1/4W 330PF 50V C682 C737 100NF 25V L653 33UH C738 100NF 25V C696 1UF 50V PVDD D651 BAS316 D650 1 C658 220UF 16V + A K BAS316 2 OFF_MUTE 30 31 FFX3A FFX3B OUT1B OUT1B CN601 L652 33UH C736 100NF 25V C679 1N 50V C684 1N 50V WSPKC734 WSPK+ NC/4.7uF K 25V 1 2 3 OUT1A L651 33uH R685 NC/22 OHM 1/4W C669 NC/330PF 50V C741 100NF 25V R662 6.2 OHM 1/4W C670 NC/330NF 50V C664 330PF 50V NC/330PF 50V C731 100NF 25V C740 100NF 25V PVDD PVDD C689 C683 NC/150uF/25V

CPVSS

VDD3V3

GNDA

LINEINL

F3XR

F3XL

CPM

F3X_FILT

LINEINR

R687

NC/3.4K 1%

L650 R65133uH

R686 C665

PWRDN AUD_V33HP 26 C678 100N 16V 27 AUD_V33

R688

0R05 1/16W Q652 BC847BW CPP VDD3V3CHP VDDIG1 GNDDIG1

C735 NC/4.7uF K 25V C652 C687

R670

25

NC/3.4K 1%

R655 6.2 OHM 1/4W

GNDPSUB

GND_REG VDD_REG OUT1A GND1 VCC1

C668 NC/330NF 50V

1N 50V

C685 NC/150uF/25V

LR SPK (6R/10W X 2)

R689 NC/3.4K 1%

NC/150uF/25V LSPK+ LSPKRSPK+ RSPK4 3 2 1

C692 1N 50V C733 NC/4.7uF K 25V

R678 4.7K1/16W +12V +5V_STB

28 C677 100N 16V 29

C732 100NF 25V

A K

C686 NC/150uF/25V

OUT2A

R679 0R05 1/10W

R680 NC/0R05 1/10W D652 1 2 A K

STA381BWTR

BAS316 1 R681 4.7K1/16W 2 K A D653 BAS316 1

R663 6.2 OHM 1/4W

CN602

BC857BW Q651

R682 1K 1/16W 5% R683 100K1/16W

CONN

TESTMODE

Anti-Pop Circuit

GNDDIG2

VDDDIG2

VCC_REG

WOOFER (16R/10W )

INTLINE

RESET

PWDN

LRCKI

37

39

43

48

38

41

42

44

45

46

47

AMP_RESET 40

LRCLKI

PWRDN

C653 AUD_V33 100N 16V

BICKI

SDI

I2S Input

C662 1N 50V

R673 100R 1/16W 5%I2C

R674 100R 1/16W 5%

OSDA1

OSCL1

49

E-Pad

BICKI

SDA

SCL

SDI

SA

220N 50V C675 220N 50V

NC/4.7uF K 25V CONN

PVDD

2012-02-06

Speaker & Sound Woofer

715G5163
19230_523_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-7 Video I/O & YPbPr

TPM9.1E LA

10.

EN 72

B07
MT5366
TU_FAT_IN2TU_FAT_IN2+

Video I/O & YPbPr

B07
HSY NC VSY NC RP GP BP COM SOG VGA_SDA VGA_SCL COM1 PB1P PR1P Y 1P SOY 1 COM0 PB0P PR0P Y 0P SOY 0 AVDD12_RGB AVSS12_RGB FS_VDAC VDAC_OUT1 VDAC_OUT2 AVDD33_VDAC AVSS33_VDAC W12 W11 AC10 AC9 AD9 AB10 AE9 AC11 AB12 AE11 AD12 AE12 AD11 AB11 AC13 AB14 AC14 AB13 AC12 AD14 Y 14 AA15 W13 Y 12 AA14 W15 HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL COM1 PB1P PR1P Y 1P SOY 1 COM0 PB0P PR0P Y 0P SOY 0 AVDD12_RGB RF_AGC 10K 1/16W 5% VDAC_FS TUNER_BY PASS_OUT TP1000 AVDD33_VDAC R1010 560R 1/10W 1% C1008 47N 50V

R1011 R1012

51R 51R

U401C AD17 AE17 AC19 AB19 Y 18 AB18 Y 16 R19 P23 AD20 AE20 AD15 AC15 AE15 AB16 AC16 AC17 AB17 Y 15 W14 W16 ADCINP_DEMOD ADCINN_DEMOD AVDD33_DEMOD AVDD33_IFPGA AVSS33_DEMOD AVDD12_DEMOD AVSS12_DEMOD IF_AGC RF_AGC LOUTN LOUTP SC0 SC1 SY 0 SY 1 CVBS2P CVBS1P CVBS0P CVBS_COM AVDD33_CVBS AVSS33_CVBS

Analog Power
AVDD1V2 R1002 0R05 1/10W C1002 100N 16V AVDD12_RGB AVDD3V3 R1003 0R05 1/10W AVDD33_CVBS C1003 100N 16V AVDD3V3 R1004 0R05 1/10W AVDD33_VDAC C1004 100N 16V AVDD3V3 R1005 0R05 1/10W AVDD33_DEMOD C1005 100N 16V

AVDD33_DEMOD AVDD33_IFPGA

DVBT Only
5135_REFCLKM 5135_REFCLKP RF_AGC_5366 IF_AGC CVBS_COM R1006 0R05 1/10W AVDD33_IFPGA C1006 100N 16V TUNER_BY PASS_OUT TU_FAT_IN2+ TU_FAT_IN2SPDIFOUT Y PbPr_R_In1 Y PbPr_L_In1 5135_REFCLKM 15 5135_REFCLKP 15 RF_AGC_5366 17 IF_AGC CVBS_COM 17 9

AVDD12_DEMOD

IF_AGC RF_AGC 5135_REFCLKM 5135_REFCLKP

TUNER_BY PASS_OUT 9 TU_FAT_IN2+ 17 TU_FAT_IN2- 17 SPDIFOUT Y PbPr_R_In1 Y PbPr_L_In1 6 6 6

+5V_SW

AVDD1V2 R1008 NC/10K 1/16W 5% R1009 RF_AGC_5366 R1007 0R05 1/10W AVDD12_DEMOD C1007 100N 16V

CVBS2P CVBS1P CVBS_COM AVDD33_CVBS

MT5366IVGG

SOY 0 Y 0P COM0 PB0P PR0P CVBS2P HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL

SOY 0 Y 0P COM0 PB0P PR0P CVBS2P HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL GND

9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 2,3,4,5,6,7,9,10,11,12,13,14,15,16,17

YPbPr & Audio IN

YPBPR IN
C1018 47NF 16V CVBS1P R1026 100R 1/16W 5%

AV AUDIO IN for YPbPr

C1001 1.5nF 50V SOY 1 C1009 10N 50V


56R 1/16W 1%

CN111 PR_IN_1 PB_IN_1 Y _IN_1 5 6 3 4 1 2 11 12 9 10 7 8


C

Y _IN_1
-------><-------

R1013 18R 1/16W 5% R1015

Y1 R1014 100R 1/16W 5% C1010 47pF 50V

Y 1P

SPDIFOUT Y PbPrR_IN Y PbPrL_IN

C1016 Y PbPrR_IN
---><---|>

R1024 Y PbPr_R_In1 30K 1/16W

C1011 10N 50V COM1 R1017 100R 1/16W 5% C1012 10N 50V

C1023 NC/10N 50V

10uF 10V

R1016 0R05 1/16W

RCA JACK

PB_IN_1
-------><-------

56R 1/16W 1%

R1018 18R 1/16W 5% R1020

PB1 R1019 100R 1/16W 5%

PB1P

<G/BL/R>

<W/R/B>

C1013 47pF 50V

C1017 Y PbPrL_IN
---><---|>

R1025 Y PbPr_L_In1 30K 1/16W

C1024
56R 1/16W 1%

10uF 10V

-------><-------

NC/10N 50V C1014 47pF 50V C1015 10N 50V PR1 R1023 100R 1/16W 5% PR1P

R1021 R1022 18R 1/16W 5%

PR_IN_1

2012-02-06

Video I/O & YPbPr

715G5163
19230_524_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-8 Scart

TPM9.1E LA

10.

EN 73

B08

SCART

B08
CVBS_COM SCART1R_PA SCART1L_PA CVBS2P SOY 0 Y 0P COM0 PB0P PR0P SCART_FS0 TUNER_BY PASS_OUT SCART1_R_In SCART1_L_In OFF_MUTE HP_SC_MUTE SCT1_B_IN CVBS_COM 8 SCART1R_PA 6 SCART1L_PA 6 CVBS2P 8 SOY 0 8 Y 0P 8 COM0 8 PB0P 8 PR0P 8 SCART_FS0 13 TUNER_BY PASS_OUT 8 SCART1_R_In 6 SCART1_L_In 6 OFF_MUTE 6,7 HP_SC_MUTE 6 GND 2,3,4,5,6,7,8,10,11,12,13,14,15,16,17

SCART (Full SCART) -- CVBS+SV+RGB+TV OUT


22

1 SCT1_AUR_IN 2 3 4 5 SCT1_AUL_IN SCT1_FS_IN 6 7 8 9 10 11 12 13 14 15 SCT1_FB_IN SCT1_AV1_GND SCT1_AV_IN 16 17 18 19 20 21 CN151 SCART CONN 21P

SCT1_AUR_OUT SCT1_AUL_OUT

SCT1_G_IN

SCT1_R_IN SCT1_AVO_GND SCT1_AV_OUT

23

CVBS IN
SCT1_AV_IN C1056 100R 1/16W 5% 47nF 16V
47pF 50V

CVBS OUT
R1060 C1054 CVBS2P TUNER_BY PASS_OUT L1050 1.8 uH R1063 75R C1071 CVBS_COM 1uF 10V C1057 NC/47pF 50V C1055 47pF 50V SCT1_AV_OUT

FAST BLANKING/SOY
SCT1_FB_IN SOY 0

R1062 75R

R1064 75R 1/10W 5%

RGB IN
SCT1_B_IN R1067 100R 1/16W 5% R1070 75R R1071 0R05 1/16W C1060 47pF 50V R1072 100R 1/16W 5%

Audio Output
C1059 Y 0P 10N 50V C1067 SCART1R_PA C1061 10N 50V 10uF 10V COM0 330R 1/16W 5%
NC/10NF 50V C1052

Function Select
R1051 SCT1_AUR_OUT

R1053 47K 1/16W 5% SCT1_FS_IN R1065 51K 1/16W 5%


R1069 10K 1/16W 5%

SCART_FS0

SCT1_G_IN

R1075 100R 1/16W 5%

C1063 10N 50V

PB0P OFF_MUTE R1052 0R05 1/16W R1054 0R05 1/16W 2

R1 Q1050

R1076 75R

C1064 47pF 50V

HP_SC_MUTE

DTC623TK

R1077 75R

C1065 47pF 50V R1079 100R 1/16W 5% C1066 10N 50V PR0P SCART1L_PA 10uF 10V C1068

SCT1_R_IN

R1055 330R 1/16W 5%


NC/10NF 50V C1053

SCT1_AUL_OUT R1056
47K 1/16W 5%

Audio Input
OFF_MUTE R1057 0R05 1/16W 2 SCT1_AUR_IN
C1069

R1

C1058
NC/10N 50V

10uF 10V R1068 30K 1/16W

SCART1_R_In

HP_SC_MUTE R1058 0R05 1/16W

Q1051 DTC623TK
1

SCT1_AUL_IN
C1070

C1062
NC/10N 50V

10uF 10V R1073 30K 1/16W

SCART1_L_In

2012-02-06

SCART

715G5163
19230_525_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-9 VGA Input

TPM9.1E LA

10.

EN 74

B09

VGA Input

B09
VGA_UR_EN VGA_UR_EN U0TX U0RX 13 4,5 4,5 U0TX U0RX C1104 1.5nF 50V SOG R1100 0R05 1/16W +5V_SW
17

VGA Input
C1105 10N 50V GRN 6 1 7 2 8 3 9 4 10 5
16

GP R1101 100R 1/16W 5% C1106 47pF 50V C1108 10N 50V VGACOM

K A

R1102

VGASDA_IN HSY NC# VSY NC# VGASCL_IN

12 13 14 15

D1101 BAS316 1 A K 2
----------><---------|

VGA_PLUGPWR

GRN_GND R1103 0R05 1/16W R1104 100R 1/16W 5%

VGA_TX

75R

VGA_RX

11

RED_GND RED GRN_GND GRN BLU_GND BLU

D1100 BAS316

VGA_R_In VGA_L_In HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL EDID_WEN

VGA_R_In VGA_L_In HSY NC VSY NC RP GP BP VGACOM SOG VGASDA VGASCL EDID_WEN GND

6 6 8 8 8 8 8 8 8 8 8 13,14 2,3,4,5,6,7,8,9,11,12,13,14,15,16,17

-------><-------

CN101 D-SUB 15P

DVDD3V3 +5V_SW

VGA IN

C1107 10N 50V BLU BP R1105 100R 1/16W 5% R1106 C1109 47pF 50V
75R -------><-------

DVDD3V3

2,3,4,5,6,7,11,12,13,14,15,16,17

DVDD3V3 R1128 4K7 1/16W 5% 100R 1/16W 5% VGA_UR_EN R1127 2 Q1103 BC847C R1131 NC/0R05 1/16W
1 3

R1129 10K 1/16W 5%

BLU_GND

C1110 10N 50V RED RP R1107 100R 1/16W 5%


75R -------><-------

R1108

C1111 47pF 50V

2N7002 Q1101 VGA_RX

2N7002 Q1105 U0RX VGA_TX

2N7002 Q1102

2N7002 Q1104

NC/10K1/16W 10uF 10V C1113 U0TX R1130

RED_GND

R1121 NC/100R 1/16W 5%

R1122 NC/100R 1/16W 5%

VGA SYNC SLICER


HSY NC#

VGA EDID
HSY NC VGA_PLUGPWR R1111 NC/2K 1/16W 5% C1100 NC/5PF 50V

VGA_PLUGPWR

VGA Audio Input


CN102 3 VGA_AudioLIN VSY NC# 2 1 PHONE JACK VGA_AudioRIN

R1110 0R05 1/16W ZD1100 UDZSNP5.6B

C1103 100N 16V U110 1 2 3 4 A0 VCC A1 WP A2 SCL GND SDA 8 7 6 5

R1116 10K 1/16W 5%

R1113 VSY NC
2

VGASCL VGASDA

0R05 1/16W ZD1101 UDZSNP5.6B R1114 NC/2K 1/16W 5% C1102 NC/5PF 50V

AT24C02C-XHM-T R1118 EDID_WEN 10K 1/16W 5% 2


1 3

VGA I2C
VGA_AudioRIN R1109 C1112 30K 1/16W 10uF 10V R1115 10K 1/16W 5% VGA_R_In VGA_PLUGPWR

VGA AUDIO
R1117 VGASCL_IN
----------><---------|

Q1100 BC847C

VGASCL 100R 1/16W 5%

VGA_AudioLIN

R1112 30K 1/16W

VGA_L_In

C1101 10uF 10V

VGA_PLUGPWR

R1119 10K 1/16W 5% R1120 VGASDA_IN


----------><---------|

VGASDA 100R 1/16W 5%

2012-02-06

VGA Input

715G5163
19230_526_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-10 LVDS

TPM9.1E LA

10.

EN 75

B10
MT5366
AVDD33_USB_2P
5K1 1/16W 5%

LVDS

B10
LVDS OUTPUT
AVDD33_LVDSA AVDD33_LVDSA AVSS33_LVDSA AVSS33_LVDSA AVDD12_VPLL AVSS12_VPLL TP_VPLL AE0P AE0N AE1P AE1N AE2P AE2N AECKP AECKN AE3P AE3N AE4P AE4N AE5P AE5N AO0P AO0N AO1P AO1N AO2P AO2N AOCKP AOCKN AO3P AO3N AO4P AO4N AO5P AO5N E18 E19 E16 E17 Panel_12V PANEL_VCC FB4004 120R/3000mA 1
NC/0R05 1/16W

U401D AB1 V7 AC3 AB2 AC1 AC2 AD1 AVDD33_USB_2P AVSS33_USB_2P USB_2P_VRT USB_2P_DP0 USB_2P_DM0 USB_2P_DP1 USB_2P_DM1 AVDD33_LVDSTX

USB_VRT
R403

USB_DP0 USB_DM0 USB_DP1 USB_DM1

F19 G19 A24 D17 C17 C19 D19 D20 C20 C21 D21 D23 C23 C24 D24 D25 C25 A17 B17 A18 B18 A19 B19 A20 B20 A21 B21 A22 B22 A23 B23

AVDD12_VPLL Panel_12V VPLL_TP TX_AE0P TX_AE0N TX_AE1P TX_AE1N TX_AE2P TX_AE2N TX_AECKP TX_AECKN TX_AE3P TX_AE3N TX_AE4P TX_AE4N LVDS_CTRL NC/1K 1/16W 5% 0N 1N 2N TX_AO0P TX_AO0N TX_AO1P TX_AO1N TX_AO2P TX_AO2N TX_AOCKP TX_AOCKN TX_AO3P TX_AO3N TX_AO4P TX_AO4N
TP400 TP401 TP402 TP403 TP404 TP405 TP406 TP407 TP408 TP409 TP420 TP421

3V3SB DVDD3V3 USB_DP0 USB_DM0 LVDS_CTRL BRIGHT_ADJ INVERTER_ON_OFF BL_DIMMING BL_ON/OFF

3V3SB 2,3,4,5,6,7,14 DVDD3V3 2,3,4,5,6,7,10,12,13,14,15,16,17 USB_DP0 5 USB_DM0 5 LVDS_CTRL 13 BRIGHT_ADJ 2 INVERTER_ON_OFF 2 BL_DIMMING 13 BL_ON/OFF 13 GND 2,3,4,5,6,7,8,9,10,12,13,14,15,16,17

TP424

TP DVDD3V3
NC/1K 1/16W 5%

2 FB400 120R/3000mA

USB_DP1 USB_DM1

C408 NC/10uF 16V R417 10KOHM CN408


41

USB_DP1 USB_DM1

5 5 NC/HEADER 30

2 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

R400 R418

R401

Panel_12V 3V3 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 CONN R402 NC/100R 1/16W 5%BL_DIMMING 0P 1P 2P K1P 3P 0N 0P 1N 1P 2N 2P K1N K1P
TP423 TP422 TP410 TP411 TP412 TP413 TP414 TP415 TP416 TP417 TP418 TP419

3V3

K1N 3N

3N 3P

MT5366IVGG

42

Analog Power
AVDD3V3 R411 0R05 1/10W AVDD33_LVDSTX AVDD3V3 R414 0R05 1/10W AVDD33_USB_2P C402 NC/100N 16V C403 100N 16V

CN409

TX_AOCKN

TX_AOCKP

TX_AECKN

TX_AECKP

TX_AO3N

TX_AO0N

TX_AO1N

TX_AO2N

TX_AO4N

TX_AO3P

TX_AO4P

TX_AO2P

TX_AO1P

C405 100N 16V

AVDD1V2 R416 0R05 1/10W AVDD12_VPLL C406 NC/100N 16V C407 100N 16V

INVERTER ON/OFF
BL_ON/OFF: Inverter on: Low Inverter off: High

+5V_SW DVDD3V3 DVDD3V3 3V3SB R409 NC/2KOHM 1/10W R410 1KOHM +-5% 1/10W

INVERTER _ON_OFF

RA

RB

BRIGHT ADJUST
BL_DIMMING(PWM for BRIGHT_ADJ): Max: 0V Min: +3V3
BL_DIMMING

DVDD3V3

+5V_SW DVDD3V3

TX_AO0P

TX_AE3N

TX_AE0N

TX_AE1N

TX_AE2N

TX_AE4N

TX_AE3P

TX_AE4P

TX_AE2P

TX_AE1P

TX_AE0P

BRIGHT_ADJ
R405 NC/4.7K1/16W R404 NC/4.7K1/16W R408 R406 1K 1/10W R407

R412 4.7K1/16W

R413 NC/4.7K1/16W R415

RA

RB
Q401 MMBT3904

INVERTER_ON_OFF

3V3 5V

N/C 2K

1K N/C

R C

BRIGHT_ADJ

PWM DC

100R 10K

N/C 10U

BL_ON/OFF 4.7K1/16W

C404 NC/10uF 10V

100R 1/10W 5% Q402 MMBT3904

C401 NC/10uF 10V

4.7K1/16W

2012-02-06

LVDS

715G5163
19230_527_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-11 DRAM Interface

TPM9.1E LA

10.

EN 76

B11

DRAM Interface

B11
C4 F9 C5 A7 F8 D5 D7 A6 E6 B7 E8 F7 D6 B6 B4 A3 B3 A4 A2 D9 E7 E9 C7 E3 C16 B16 A16 F15 E15 D15 H14 H13 C2 D3 K8 J8 H8 B1 F6 E5 D4 C3 B2 A1 E4 F5 G6 F14 L3 L4 L5 L6 K6 C9 F11 F12 E10 J6 F10 H11 K7 H12 1_A0 1_A1 1_A2 1_A3 1_A4 1_A5 1_A6 1_A7 1_A8 1_A9 1_A10 1_A11 1_A12 1_A13 1_WE# 1_ODT 1_CAS# 1_CS# 1_RAS# 1_CKE 1_BA0 1_BA1 1_BA2 RVREF5 DDRV

MT5366
U401B RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15 RDQ16 RDQ17 RDQ18 RDQ19 RDQ20 RDQ21 RDQ22 RDQ23 RDQ24 RDQ25 RDQ26 RDQ27 RDQ28 RDQ29 RDQ30 RDQ31 RDQS0 RDQS0# RDQS1 RDQS1# RDQS2 RDQS2# RDQS3 RDQS3# RDQM0 RDQM1 RDQM2 RDQM3 RCLK0 RCLK0# RCLK1 RCLK1# 1_RST# AVDD12_MEMPLL MEMTP MEMTN D13 D12 E13 D11 D14 E12 E14 E11 B10 B15 A10 A15 C11 C15 C10 C14 G5 J5 H5 J4 H4 K4 G4 K3 J1 D2 J2 C1 H3 D1 J3 E2 B13 A13 A12 B12 F2 F1 G1 G2 C12 C13 G3 E1 A9 B9 K1 K2 C6 H9 H10 D8 C8 RDQ6//RDQ0 RCAS_//RA0 RDQ0//RDQ1 RA6//RA1 RDQ1//RDQ2 RBA0//RA2 RDQ7//RDQ3 RA5//RA3 RDQ4//RDQ4 RA4//RA4 RDQ5//RDQ5 RBA1//RA5 RDQ3//RDQ6 RA13//RA6 RDQ2//RDQ7 RA10//RA7 RDQ13//RDQ8 NC//RA8 RDQ11//RDQ9 RA3//RA9 RDQ10//RDQ10 RA12//RA10 RDQ12//RDQ11 RA11//RA11 RDQ15//RDQ12 RA0//RA12 RDQ9//RDQ13 RA1//RA13 RDQ8//RDQ14 RDQ14//RDQ15 RCKE//RWE_ RDQ22//RDQ16 RODT//RODT RDQ23//RDQ17 RRAS_//RCAS_ RDQ17//RDQ18 RWE_//RCS_ RDQ16//RDQ19 RCS_//RRAS_ RDQ20//RDQ20 RA9//RCKE RDQ21//RDQ21 RDQ19//RDQ22 RA8//RBA0 RDQ18//RDQ23 RA2//RBA1 RDQ26//RDQ24 RA7//RBA2 RDQ27//RDQ25 RDQ29//RDQ26 RVREF RDQ28//RDQ27 RDQ31//RDQ28 RDQ25//RDQ29 VCC2IO RDQ24//RDQ30 VCC2IO RDQ30//RDQ31 VCC2IO VCC2IO RDQS0//RDQS0 VCC2IO RDQS0_//RDQS0_ VCC2IO VCC2IO RDQS1//RDQS1 VCC2IO RDQS1_//RDQS1_ VCC2IO VCC2IO RDQS2//RDQS2 VCC2IO RDQS2_//RDQS2_ VCC2IO VCC2IO RDQS3//RDQS3 VCC2IO RDQS3_//RDQS3_ VCC2IO VCC2IO RDQM0//RDQM0 VCC2IO RDQM1//RDQM1 VCC2IO RDQM2//RDQM2 VCC2IO RDQM3//RDQM3 VCC2IO VCC2IO RCLK0//RCLK0 VCC2IO RCLK0_//RCLK0_ VCC2IO VCC2IO RCLK1//RCLK1 RCLK1_//RCLK1_ DVSS DVSS RBA2//RRESET_ DVSS DVSS AVDD12_MEMPLL DVSS AVSS12_MEMPLL DVSS DVSS MEMTP DVSS MEMTN DVSS DVSS DVSS DVSS DVSS DVSS

DDR3#1 - 64 M 16 - 1333 MHz


U402 RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15 RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0 B_RST# ZQ1 E3 F7 F2 F8 H3 H8 G2 H7 D7 C3 C8 C2 A7 A2 B8 A3 C7 B7 F3 G3 D3 E7 T2 L8 DQL0 DQL1 DQL2 DQL3 DQL4 DQL5 DQL6 DQL7 DQU0 DQU1 DQU2 DQU3 DQU4 DQU5 DQU6 DQU7 UDQS UDQS# LDQS LDQS# UDM LDM RESET# ZQ A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC# NC NC_0 NC_1 NC_2 NC_3 NC_4 NC_6 BA0 BA1 BA2 CK CK# CS# CAS# ODT RAS# WE# CKE VSSQ_0 VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSS_0 VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9 VSS_10 VSS_11 N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3 J1 J9 L1 L9 M7 T7 M2 N8 M3 J7 K7 L2 K3 K1 J3 L3 K9 B1 B9 D1 D8 E2 E8 F9 G1 G9 A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9 B_BA0 B_BA1 B_BA2 CLK0 CLK0# B_CS# B_CAS# B_ODT B_RAS# B_WE# B_CKE B_A0 B_A1 B_A2 B_A3 B_A4 B_A5 B_A6 B_A7 B_A8 B_A9 B_A10 B_A11 B_A12 B_A13

DDR3#2 - 64 M 16 - 1333 MHz


U403 RDQ16 RDQ17 RDQ18 RDQ19 RDQ20 RDQ21 RDQ22 RDQ23 RDQ24 RDQ25 RDQ26 RDQ27 RDQ28 RDQ29 RDQ30 RDQ31 RDQS3 RDQS3# RDQS2 RDQS2# RDQM3 RDQM2 A_RST# ZQ2 E3 F7 F2 F8 H3 H8 G2 H7 D7 C3 C8 C2 A7 A2 B8 A3 C7 B7 F3 G3 D3 E7 T2 L8 DQL0 DQL1 DQL2 DQL3 DQL4 DQL5 DQL6 DQL7 DQU0 DQU1 DQU2 DQU3 DQU4 DQU5 DQU6 DQU7 UDQS UDQS# LDQS LDQS# UDM LDM RESET# ZQ A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC# NC NC_0 NC_1 NC_2 NC_3 NC_4 NC_6 BA0 BA1 BA2 CK CK# CS# CAS# ODT RAS# WE# CKE VSSQ_0 VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSS_0 VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9 VSS_10 VSS_11 N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3 J1 J9 L1 L9 M7 T7 M2 N8 M3 J7 K7 L2 K3 K1 J3 L3 K9 B1 B9 D1 D8 E2 E8 F9 G1 G9 A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9 DDRV A_BA0 A_BA1 A_BA2 CLK1 CLK1# A_CS# A_CAS# A_ODT A_RAS# A_WE# A_CKE A_A0 A_A1 A_A2 A_A3 A_A4 A_A5 A_A6 A_A7 A_A8 A_A9 A_A10 A_A11 A_A12 A_A13 RCLK0 R4101 0R05 1/16W R4102 100R 1/16W 5% RCLK0# R4103 0R05 1/16W CLK0# CLK0

DDRV

RCLK1

R4104 0R05 1/16W

CLK1

1K 1/16W 1% R4105

C4101 100N 16V

R4106 100R 1/16W 5% RCLK1# R4107 0R05 1/16W CLK1#

1K 1/16W 1% R4108

C4102 100N 16V

R4119 240 OHM +-5% 1/16W

R4120 240 OHM +-5% 1/16W DDRV A1 A8 C1 C9 D2 E9 F1 H2 H9 DDRV DDRV


1K 1/16W 1% R4111

DDRV A1 A8 C1 C9 D2 E9 F1 H2 H9 B2 D9 G7 K2 K8 N1 N9 R9 R1 VDDQ_0 VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDD_0 VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_8 VDD_7

VDDQ_0 VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDD_0 VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_8 VDD_7

A_WE# A_ODT A_CAS# A_RAS# A_A2 A_A5 A_A0 A_CS# A_A9 A_A7 A_A13 A_RST# A_CKE A_BA0 A_BA2 A_A3 A_A4 A_A1 A_BA1 A_A10 A_A12 A_A6 A_A8 A_A11

RP4100 1 2 3 4 RP4102 1 2 3 4 RP4104 1 2 3 4 RP4106 1 2 3 4 RP4108 1 2 3 4 RP4110 1 2 3 4

0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5

1_WE# 1_ODT 1_CAS# 1_RAS# 1_A2 1_A5 1_A0 1_CS# 1_A9 1_A7 1_A13 1_RST# 1_CKE 1_BA0 1_BA2 1_A3 1_A4 1_A1 1_BA1 1_A10 1_A12 1_A6 1_A8 1_A11

DDRV

1K 1/16W 1% R4110

1K 1/16W 1%

AVDD1V2 R4112 AVDD12_MEMPLL 0R05 1/16W C4111 100N 16V

C4103 100N 16V RVREF1

C4106 100N 16V RVREF2

R4115

C4105 100N 16V

C4104 100N 16V RVREF4

RVREF3
1K 1/16W 1% R4114

1K 1/16W 1% R4100

C4107 100N 16V

H1

VREFDQ VREFCA NT5CB64M16DP-CF

M8

C4110 100N 16V

1K 1/16W 1%

C4109 100N 16V

H1

VREFDQ VREFCA NT5CB64M16DP-CF

M8

C4108 100N 16V

MT5366IVGG TP4101 TP4102

R4109 1K 1/16W 1%

R4118

R4113 1K 1/16W 1%

Analog Power

B2 D9 G7 K2 K8 N1 N9 R9 R1

DDRV

1_RAS# 1_CAS# 1_WE# 1_ODT 1_A5 1_A2 1_CS# 1_A0 1_A13 1_RST# 1_A9 1_A7 C4130 100N 16V C4131 100N 16V C4132 100N 16V C4133 100N 16V C4134 100N 16V 1_BA2 1_A3 1_BA0 1_CKE DDRV 1_A4 1_A1 1_BA1 1_A10 C4118 100N 16V C4119 100N 16V C4120 100N 16V C4121 100N 16V 1_A12 1_A6 1_A8 1_A11 DDRV

RP4101 1 2 3 4 RP4103 8 7 6 5 RP4105 1 2 3 4 RP4107 1 2 3 4 RP4109 1 2 3 4 RP4111 1 2 3 4

0OHM 1/16W 8 7 6 5 0OHM 1/16W 1 2 3 4 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5 0OHM 1/16W 8 7 6 5

B_RAS# B_CAS# B_WE# B_ODT B_A5 B_A2 B_CS# B_A0 B_A13 B_RST# B_A9 B_A7 B_BA2 B_A3 B_BA0 B_CKE B_A4 B_A1 B_BA1 B_A10 B_A12 B_A6 B_A8 B_A11

C4122 NC/10uF 16V

C4123 100N 16V

DDRV

C4112 NC/10uF 16V

C4113 100N 16V

C4114 100N 16V

C4115 100N 16V

C4116 100N 16V

DDR3_DDRV= 1.5V
DVDD3V3 3 U4101
ADJ(GND)

DDRV DDRV AP1117DL-13 VOUT 2 FB4100 120R/3000mA 1 2 C4124 10uF 10V + C4136 100UF 16V C4138 10uF 10V C4139 10uF 10V C4140 100N 16V C4125 100N 16V C4100 100N 16V

VIN

DVDD3V3 C4126 C4127 NC/10uF 16V 10uF 10V C4128 100N 16V C4129 100N 16V GND

C4137 100UF 16V

C4135 100N 16V

R4116 110R 1/10W 1%

DVDD3V3

2,3,4,5,6,7,10,11,13,14,15,16,17

2,3,4,5,6,7,8,9,10,11,13,14,15,16,17

R4117 24R 1/10W 1%

1.25 x (1+27/110) = 1.556V

2012-02-06

DRAM Interface

715G5163
19230_528_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-12 MII & GPIO & Service AD

TPM9.1E LA

10.

EN 77

B12

MII & GPIO & Service AD

B12
HP_DET

MT5366
U401E PWR5V_3 R4176 1K USB_OC_COM1 USB_PWR_EN1 DEMOD_S2_RESET PHY RST# +12V_DET RF_AGC_Control LVDS_CTRL HDMI_SW_CTRL1 HDMI_SW_CTRL2 ARC_EN VGA_UR_EN PIN109 PIN112 HP_DET PANEL_VCC_ON/OFF AMP_MUTE T2_RESET SY S_EEPROM_WP PWR5V_1 R4151 1K LED_G USB_OC_COM0 USB_PWR_EN0 88471_INT BL_ON/OFF I2SAMP_RESET EDID_WEN LCD_Clock_SDA LCD_Clock_SCL LED_R SP_AMP_MUTE R4158 0R05 OHM OPCTRL4 OPCTRL5 SCART_FS0 TP TP4150 KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE Light_Sensor E25 G24 F23 H25 G23 E24 H20 G21 H21 E22 F22 F21 G20 H24 G25 G22 P6 R6 P5 P4 P3 P2 P1 R5 U5 U6 V6 U7 AD8 AE8 AA8 AE6 AB7 Y7 GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 GPIO17 GPIO18 GPIO19 GPIO20 GPIO21 GPIO22 GPIO23 GPIO24 GPIO25 GPIO26 GPIO27 OPCTRL0 OPCTRL1 OPCTRL2 OPCTRL3 OPCTRL4 OPCTRL5 ADIN0_SRV ADIN1_SRV ADIN2_SRV ADIN3_SRV ADIN4_SRV ADIN5_SRV DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 CI_TSCLK CI_TSVAL CI_TSSY NC CI_TSDATA0 PVR_TSCLK PVR_TSVAL PVR_TSSY NC PVR_TSDATA0 PVR_TSDATA1 SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST ETCOL ETTXEN ETTXD3 ETTXD2 ETTXD1 ETTXD0 ETTXCLK ETRXDV ETRXD3 ETRXD2 ETRXD1 ETRXD0 ETRXCLK ETPHY CLK ETMDIO ETMDC OPWM2 OPWM1 OPWM0 R25 R24 R22 N19 P25 N20 P21 P24 P22 M21 M20 M19 N22 N21 M22 M25 M24 R23 AA3 W5 Y5 Y3 Y2 Y1 W2 Y4 W3 W4 V3 V4 W1 AA4 V5 W6 T6 T5 R7 SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST COL/SNI ETTXEN ETTXD3 ETTXD2 ETTXD1 ETTXD0 ETTXCLK_REF_CLK RXDV ETRXD3 ETRXD2 ETRXD1 ETRXD0 ETRXCLK PHY _REFCLK ETMDIO ETMDC BL_DIMMING TP4152 TP DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 MCHIP_RST# R4153 NC/4.7K1/16W 11 LVDS_CTRL 14 HDMI_SW_CTRL1 14 HDMI_SW_CTRL2 14 ARC_EN 10 VGA_UR_EN 15 PIN109 15 PIN112

HP_DET

15 15 15 15

SPI_CLK SPI_DATA SPI_CLE CI_INT

SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 SP_AMP_MUTE EDID_WEN I2SAMP_RESET SY S_EEPROM_WP PANEL_VCC_ON/OFF BL_DIMMING BL_ON/OFF LED_R LED_G

LVDS_CTRL HDMI_SW_CTRL1 HDMI_SW_CTRL2 ARC_EN VGA_UR_EN PIN109 PIN112

15 DEMOD_RST 15 DEMOD_TSCLK 15 DEMOD_TSVAL 15 DEMOD_TSSY NC 15 DEMOD_TSDATA0 6 SP_AMP_MUTE 10,14 EDID_WEN 7 I2SAMP_RESET 4 SY S_EEPROM_WP 3 PANEL_VCC_ON/OFF 11 BL_DIMMING 11 BL_ON/OFF 5 LED_R 5 LED_G

5 KEY _UP_DN_DCSW 5 KEY _MENU_L_R_SOURCE 5 USB_PWR_EN0 5 USB_OC_COM0 14 14 PWR5V_3 PWR5V_1

KEY _UP_DN_DCSW KEY _MENU_L_R_SOURCE USB_PWR_EN0 USB_OC_COM0 PWR5V_3 PWR5V_1 SCART_FS0 OPCTRL4 OPCTRL5 LCD_Clock_SCL LCD_Clock_SDA +12V_DET Light_Sensor AMP_MUTE

R4159 4.7K1/16W

9 SCART_FS0 4 OPCTRL4 4 OPCTRL5 5 LCD_Clock_SCL 5 LCD_Clock_SDA 2 +12V_DET 5 Light_Sensor 7 AMP_MUTE 2,3,4,5,6,7,8,9,10,11,12,14,15,16,17 GND 16 88471_INT

R4152 4K7 1/16W 5%

SEV_ADIN0 AA9 SEV_ADIN1 AA11 SEV_ADIN2 Y 10 W9 SEV_ADIN4 W10 SEV_ADIN5 Y 11

88471_INT T2_RESET DEMOD_S2_RESET RF_AGC_Control DEMOD_S2_RESET USB_PWR_EN1 USB_OC_COM1

16 T2_RESET 17 DEMOD_S2_RESET 17 RF_AGC_Control 17 DEMOD_S2_RESET 5 USB_PWR_EN1 5 USB_OC_COM1

MT5366IVGG

ETHERNET PHY MII Mode


DVDD3V3_MII ETMDC ETMDIO ETTXCLK_REF_CLK C4169 NC/10PF 50V R4154 R4156 NC/22R 1/16W 5% NC/22R 1/16W 5% 30 31 23 24 25 26 NC/22R 1/16W 5% 27 22 13 14 16 17 18 19 38 NC/22R 1/16W 5% 36 NC/22R 1/16W 5% NC/0R05 1/16W 39 NC/0R05 1/16W 42 NC/0R05 1/16W 43 34 35 DVDD12 28 15 21 37 7 20 33 47 MDC MDIO TXD0 TXD1 TXD2 TXD3 TXEN TXC RXDV RXD0 RXD1 RXD2 RXD3 RXC COL CRS/CRS_DV RXER/FXEN CKXTAL1 CKXTAL2 LED0/PHY AD0 LED1/PHY AD1 DVDD10 DVDD33 DVDD33 DVDD33 GND GND GND GND RSET PHY RSTB INTB 46 29 32 PHY RST# R4169 NC/2.49K 1% AVDD10OUT DVDD10OUT AVDD33 AVDD33 NC NC NC PMEB NC TXER NC NC MDI[1]+ MDI[1]MDI[0]+ MDI[0]48 40 6 41
NC/100N 16V

ESD & Surge Protect


U4151 NC/uClamp2512T.TCT MDI_TN MDI_TP R4155 NC/1K5 1/16W 5% NC/RTL8201FL-VB-CG U4150 MDI_RP MDI_RN DVDD12 6 5 8 7 OUT1 OUT2 OUT3 OUT4 IN1 IN2 IN3 IN4 1 2 3 4 MDI_TN MDI_TP MDI_RP MDI_RN

MCHIP_RST# 2,3,4,5,6,7,10,11,12,14,15,16,17 DVDD3V3 2,3,4,5,6,7,11,14 3V3SB

MCHIP_RST# DVDD3V3 3V3SB

R4162 NC/22R 1/16W 5%

C4173 NC/10PF 50V

ETRXCLK C4172 NC/10PF 50V

R4164 NC/22R 1/16W 5%

C4174 NC/10PF 50V

ETTXD0 4 ETTXD1 3 ETTXD2 2 ETTXD3 1 ETTXEN TX_CLK RXDV ETRXD0 1 ETRXD1 2 ETRXD2 3 ETRXD3 4 RX_CLK COL/SNI CRS/RPTR RXER/FXEN MII_XTAL_IN MII_XTAL_OUT
2

5 RP4150 6 NC/22R 7 8 R4175 8 NC/22R 7 RP4151 6 5 R4177 R4166 R4165 R4160 R4167 LED0_AD0 LED1_AD1

C4153 3 8 9 10 11 12 44 45 4 5 1 2

C4163 C4164 NC/10uF 10V NC/100N 16V C4175 NC/100N 16V PMEB R4157 NC/0R05 1/10W

C4165 C4166 NC/10uF 10V 100N 16V C4151 NC/100NF 25V C4150 NC/100N 16V C4152 NC/10N 50V

DVDD3V3_MII

Activity LED: Yellow Link LED: Green Ethernet DTE Device

DVDD3V3_MII MDI_RP MDI_RN MDI_TP MDI_TN PMEB

R4194 NC/4K7 1/16W 5%

R4161 NC/49.9 OHM +-1% 1/10W

R4163 C4154 NC/49.9 OHM +-1% 1/10W NC/100NF 25V

C4155 NC/10N 50V R4190 NC/0R05 1/10W

RJ45
CN4150 1 2 TD+ P1 3 CT P2 4 TD- P3 5 RD+ P4 6 CT P5 7 RD- P6 8 NC P7 9 Ground P8 10 G+ P9 11 G- P10 12 Y + P11 Y - P12 NC/RJ45 CONN+LED
GND GND
1

1 C4156 NC/27P 50V


4

X4150 3 NC/25MHz C4157 NC/27P 50V DVDD3V3_MII

R4195 NC/4K7 1/16W 5%

NC/10PF 50V C4176 NC/10PF 50V C4177 NC/10PF 50V C4178

MDI_TP MDI_TN MDI_RP MDI_RN R4172 NC/0R05 1/10W DVDD3V3_MII LED0_AD0 NC/510R 1/10W LED1_AD1 NC/510R 1/10W

R4170 NC/0R05 1/10W C4158 C4159 C4171 C4170 NC/10uF 10V NC/100N 16V NC/100N 16V NC/100N 16V DVDD3V3

NC/10PF 50V C4179 R4171 R4168

R4173 NC/49.9 OHM +-1% 1/10W

R4174 NC/49.9 OHM +-1% 1/10W

DVDD3V3_MII R4178 NC/5.1K 1% DVDD3V3_MII NC/4K7 1/16W 5% R4179 NC/4K7 1/16W 5% R4189 NC/4K7 1/16W 5% R4191 NC/4K7 1/16W 5% R4180 NC/4K7 1/16W 5% R4187 NC/4K7 1/16W 5% R4188 RXDV CRS/RPTR COL/SNI RXER/FXEN LED0_AD0 LED1_AD1 NC/4K7 NC/4K7 NC/4K7 NC/4K7 NC/4K7 NC/4K7 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 5% R4181 5% R4182 5% R4183 5% R4184 5% R4185 5% R4186 PHY RST# C4167 NC/10N 50V

FB4150 NC/60OHM PHY _REFCLK 1 2 C4168 NC/47P 50V

C4160 NC/100N 16V

NEAR

C4161 NC/100N 16V

C4162 NC/10N 50V

13

14

2012-02-06

MII & GPIO & Service AD

715G5163
19230_529_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-13 HDMI Switch & Connector

TPM9.1E LA

10.

EN 78

B13

HDMI Switch & Connector

B13
MT5366
U401G RX_0 RX_0B RX_1 RX_1B RX_2 RX_2B RX_C RX_CB HDMI_CEC HDMI_HPD HDMI_SCL HDMI_SDA PWR5V AVDD33_HDMI AE3 AD3 AE4 AD4 AE5 AD5 AE2 AD2 AB6 AC6 AC5 AB5 AD6 AE1 AA6 AC4 M_RX1_0 M_RX1_0B M_RX1_1 M_RX1_1B M_RX1_2 M_RX1_2B M_RX1_C M_RX1_CB HDMI_CEC HDMI_SW_HPD HDMI_SW_SCL HDMI_SW_SDA PWR5V_2 R566 1K AVDD33_HDMI AVDD12_HDMI

+5V_SW

HDMI SWITCH

D502 NC/BAT54C 1 2

Analog Power
AVDD3V3 R502

FB503 NC/120R/3000mA

( 17 mA )
AVDD33_HDMI

DVDD3V3 R574 DV33_TMDS 0R05 1/10W C509 100N 16V C502 NC/10uF 10V C503 100N 16V C504 100N 16V C505 100N 16V C506 100N 16V C507 100N 16V C508 100N 16V C519 100N 16V C520 100N 16V

5V Input Detect
PWR5V_1 PWR5V_3 PWR5V_1 PWR5V_3 13 13

RX2_0+ RX2_0DV33_TMDS RX2_C+ RX2_CHDMI2_SCL HDMI2_SDA HPD2 1

RX2_2+ RX2_2DV33_TMDS RX2_1+ RX2_1-

HPD3

R572 C510 1uF 16V

0R05 1/10W

DV33_TMDS M_RX1_2 M_RX1_1 M_RX1_0 M_RX1_C R554 R555 R556 R557 100R 100R 100R 100R 1/16W 1/16W 1/16W 1/16W 1% 1% 1% 1% M_RX1_2B M_RX1_1B M_RX1_0B M_RX1_CB

4.7K1/16W U500 TMDS361BPAGR

64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49

HDMI_SW_CTRL1 HDMI_SW_CTRL2 SPDIF_OUT ARC_EN EDID_WEN

HDMI_SW_CTRL1 13 HDMI_SW_CTRL2 13 SPDIF_OUT ARC_EN EDID_WEN GND 6 13 10,13 2,3,4,5,6,7,8,9,10,11,12,13,15,16,17

HPD3 D2+_2 D2-_2 VCC D1+_2 D1-_2 GND D0+_2 D0-_2 VCC CLK+_2 CLK-_2 SCL2 SDA2 HPD2 LP

AVDD1V2 R503

( 61 mA )
AVDD12_HDMI

HDMI3_SDA HDMI3_SCL RX3_CRX3_C+ DV33_TMDS RX3_0RX3_0+ RX3_1RX3_1+ DV33_TMDS RX3_2RX3_2+

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

D2+_SINK D2-_SINK VCC D1+_SINK D1-_SINK GND D0+_SINK D0-_SINK VCC CLK+_SINK CLK-_SINK GND SCL_SINK SDA_SINK HPD_SINK S1/SCL

SDA3 SCL3 GND CLK-_3 CLK+_3 VCC D0-_3 D0+_3 GND D1-_3 D1+_3 VCC D2-_3 D2+_3 GND VSadj

D2+_1 D2-_1 VCC D1+_1 D1-_1 GND D0+_1 D0-_1 VCC CLK+_1 CLK-_1 SCL1 SDA1 HPD1 I2C_SEL S2/SDA

48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33

RX1_2+ RX1_2DV33_TMDS RX1_1+ RX1_1RX1_0+ RX1_0DV33_TMDS RX1_C+ RX1_CHDMI1_SCL HDMI1_SDA HPD1

HDMI 2
DV33_TMDS

HDMI 1

HDMI 3

NONE

0R05 1/10W C511 100N 16V OSCL0 OSDA0

AVDD12_HDMI AVSS33_HDMI

HDMI_SW_CTRL1 HDMI_SW_CTRL2

H H

L H

L L

H
MT5366IVGG

OSCL0 OSDA0

4,5 4,5

DVDD3V3 3V3SB

DVDD3V3 3V3SB

2,3,4,5,6,7,10,11,12,13,15,16,17 2,3,4,5,6,7,11

R573 R543 NC/4.7K1/16W NC/4.7K1/16W R504 NC/2.2K1/16W R508 0R05 1/16W

R506 R507 NC/4.7K1/16W R509 NC/4.7K1/16W

HDMI_SW_CTRL2 NC/100R 1/16W 5%

DV33_TMDS

R505 4.02K 1%

OSDA0 R571 100R 1/16W 5% OSCL0 R570 100R 1/16W 5% R511 HDMI_SW_CTRL1 NC/100R 1/16W 5%

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

U5003 PIN 32 PIN 33

TMDS351 S1 S2 R508 NC OR 4K7

TMDS361B SCL SDA

M_RX1_2 M_RX1_2B DV33_TMDS M_RX1_1 M_RX1_1B

M_RX1_0 M_RX1_0B DV33_TMDS M_RX1_C M_RX1_CB

R510 0R05 1/16W R512 R513 R514 10K 1/16W 5% 10K 1/16W 5% 4.7K1/16W DV33_TMDS

R505 TMDS351 IT6633T 4.02K 0R TMDS361B 4.02K

R504 2K2 NC NC

FB503 120R/3000mA NC NC

R572 NC 0R NC
RX1_2+ RX1_2RX1_1+ RX1_1-

HDMI_SW_SCL HDMI_SW_SDA HDMI_SW_HPD

SIDE HDMI ESD PROTECTER


U501 1 2 IN1 IN2 4 5 IN3 IN4 NC/RClamp0524P.TCT RX1_2+ 10 OUT1 9 RX1_2OUT2 RX1_1+ 7 OUT3 6 RX1_1OUT4

GND 8 GND 8 GND 8 GND 8 GND 8 GND 8

HDMI 1 INPUT /Support ARC


CN501 22 23 SHELL3 D2+ SHELL4 D2 Shield D2D1+ D1 Shield D1D0+ D0 Shield D0CK+ SHELL5 CK Shield CKCE Remote NC DDC CLK DDC DATA GND +5V HP DET SHELL6 SHELL1 SHELL7 SHELL2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 RX2_2+ RX2_2RX2_1+ RX2_1RX2_0+ 1 RX2_0RX2_C+ RX2_CCEC_2 ARC_HDMI HDMI2_SCL R519 100R 1/16W 5% HPLUGP2_5V HDMI2_SDA R520 100R 1/16W 5% D505 BAS316 PWR5V_2 1 2 HPLUGP2_5V A K RX1_0+ RX1_0+5V_SW D504 A K BAS316 2 IN3 IN4

AVDD3V3

24

HPLUGP2_5V

100N 16V

C512

------><-------

R522

R523

R524

ARC enable EDID_WEN: write_enable: High write_disable: Low


3
R530 2 EDID_WEN 4.7K1/16W R559 100K1/16W Q503 BC847C

L H
C517 1uF 10V

C513

470K R525

25 26

BAS316 D506

1K 1/16W 5% R526

ZD501

------><-------

R527 2 HPD2 1K 1/16W 5% R529 4.7K1/16W

U504 1 2 3 4 A0 VCC A1 WP A2 SCL GND SDA 8 7 6 5

R528 33 OHM 1/16W HDMI2_SCL HDMI2_SDA

ARC disable

AVDD3V3

A K

1 5

Q502 BC847C

100N 16V

NC/PDZ24B

HDMI 2 ESD PROTECTER


2 SPDIF_OUT RX3_2+ RX3_2RX3_1+ RX3_1U513 1 2 IN1 IN2 4 5 IN3 IN4 NC/RClamp0524P.TCT RX3_2+ 10 OUT1 9 RX3_2OUT2 RX3_1+ 7 OUT3 6 RX3_1OUT4 U512 74LVC1G125GV

ARC_HDMI

4 R558 180R R560 82R

HDMI

AT24C02C-XHM-T

PWR5V_2

HDMI 1 EDID EEPROM

GND 8 GND 8 GND 8

3
NC/RClamp0524P.TCT RX3_0+ 10 OUT1 9 RX3_0OUT2 RX3_C+ 7 OUT3 6 RX3_COUT4 NC/RClamp0524P.TCT CEC_3 10 OUT1 9 SCL_3 OUT2 SDA_3 7 OUT3 6 PWR5V_3 OUT4

R562 NC/0R05 1/16W

IN3 IN4

GND GND GND GND

SCL_2 SDA_2

ARC_EN
10K 1/16W 5% 47K 47K

R561 4.7K1/16W

R563 0R05 1/16W

CEC_1 SCL_1 ARC_EN SDA_1 PWR5V_1

U503 1 2 IN1 IN2 4 5

NC/RClamp0524P.TCT CEC_1 10 OUT1 9 SCL_1 OUT2 SDA_1 7 OUT3 6 PWR5V_1 OUT4

3 3 3 3 3 GND 3 GND 3 GND

HDMI 2 INPUT
CN502 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 RX1_2+ RX1_2RX1_1+ RX1_1RX1_0+ RX1_0RX1_C+ RX1_CCEC_1 SCL_1 SDA_1 PWR5V_1 R531 R532 +5V_SW 3V3SB D507 1 A K BAS316 2 RX3_0+ RX3_0RX3_C+ RX3_CSHELL3 D2+ SHELL4 D2 Shield D2D1+ D1 Shield D1D0+ D0 Shield D0CK+ SHELL5 CK Shield CKCE Remote NC DDC CLK DDC DATA GND +5V HP DET SHELL6 SHELL1 SHELL7 SHELL2 U511 1 2 IN1 IN2 4 5 IN3 IN4

K A

24

HPLUGP1_5V HPLUGP1_5V HDMI1_SCL 100R 1/16W 5% HDMI1_SDA 100R 1/16W 5% D508 BAS316 HPLUGP1_5V 1 2 A K

D503 BAS316

CEC_3 SCL_3 SDA_3 PWR5V_3

U510 1 2 IN1 IN2 4 5 IN3 IN4

100N 16V C514

------><-------

R534

R535

R536

R516 27K 1/10W 5% CEC_1 R515 CEC_2 CEC_3 R517 R518 0R05 1/16W HDMI_CEC 0R05 1/16W 0R05 1/16W

470K R537

BAS316 D509

ZD502

C515

25 26

------><-------

R538

A K

R539 2 HPD1 1K 1/16W 5% R541 4.7K1/16W

U507 1 2 3 4 A0 VCC A1 WP A2 SCL GND SDA 8 7 6 5

R540 33 OHM 1/16W HDMI1_SCL HDMI1_SDA

NC/PDZ24B

100N 16V

Q504 BC847C

1K 1/16W 5%

EDID_WEN: write_enable: High write_disable: Low


3
R542 2 EDID_WEN 4.7K1/16W

HDMI 1 ESD PROTECTER


RX2_2+ RX2_2RX2_1+ RX2_1U505 1 2 IN1 IN2 4 5 IN3 IN4 NC/RClamp0524P.TCT RX2_2+ 10 OUT1 9 RX2_2OUT2 RX2_1+ 7 OUT3 6 RX2_1OUT4

HDMI

AT24C02C-XHM-T PWR5V_1

HDMI 2 EDID EEPROM

Q505 BC847C

HDMI 3 INPUT (SIDE)


CN503 20 22 SHLD0 TMDSD2+ DSHLD0 TMDSD2TMDSD1+ DSHLD1 TMDSD1TMDSD0+ DSHLD2 TMDSD0TMDSC+ CSHLD0 TMDSCCEC NC SCL SDA DDC_GND SHLD3 VCC5 HPD SHLD1 SHLD2 HDMI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 RX3_2+ RX3_2RX3_1+ RX3_1RX3_0+ RX3_0RX3_C+ RX3_CCEC_3 SCL_3 SDA_3 PWR5V_3 HDMI3_SCL R545 100R 1/16W 5% HPLUGP3_5V HDMI3_SDA R552 100R 1/16W 5% D501 BAS316 1 2 HPLUGP3_5V A K 1 +5V_SW D510 A K BAS316 2

CLK pull down resistance

RX2_0+ RX2_0RX2_C+ RX2_C-

U506 1 2 IN1 IN2 4 5 IN3 IN4

NC/RClamp0524P.TCT RX2_0+ 10 OUT1 9 RX2_0OUT2 RX2_C+ 7 OUT3 6 RX2_COUT4

RX1_C-

R567 4.7K1/16W R568 4.7K1/16W R569 4.7K1/16W CEC_2 SCL_2 SDA_2 PWR5V_2

U508 1 2 IN1 IN2 4 5 IN3 IN4

HPLUGP3_5V

RX2_C-

NC/RClamp0524P.TCT CEC_2 10 OUT1 9 SCL_2 OUT2 SDA_2 7 OUT3 6 PWR5V_2 OUT4

100N 16V

C516

RX3_CR565 R553 R547

23 21

------><-------

470K R550

BAS316 D511

1K 1/16W 5% R544

C518

------><-------

R564 2 HPD3 1K 1/16W 5% R548 4.7K1/16W

U509 1 2 3 4 A0 VCC A1 WP A2 SCL GND SDA 8 7 6 5

R546 33 OHM 1/16W HDMI3_SCL HDMI3_SDA Q501 BC847C

A K

NC/PDZ24B

Q506 BC847C

EDID_WEN: write_enable: High write_disable: Low


3
R549 2 EDID_WEN 4.7K1/16W

100N 16V

ZD503

AT24C02C-XHM-T

PWR5V_3

HDMI 3 EDID EEPROM


1 2012-02-06

HDMI Switch & Connector

GND

Audio Reture Channel (ARC)

U502 1 2 IN1 IN2 4 5

RX1_C+ RX1_C-

NC/RClamp0524P.TCT RX1_0+ 10 OUT1 9 RX1_0OUT2 RX1_C+ 7 OUT3 6 RX1_COUT4

GND

10K 1/16W 5% 10K 1/16W 5%

47K 47K 47K

47K

715G5163
19230_530_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-14 DVB T/C Demodulator MT5135

TPM9.1E LA

10.

EN 79

B14

DVB T/C Demodulator MT5135


Demodulator 27MHz Crystal
13 PIN109 13 PIN112 PIN109 PIN112 5135_DV10 T/C/T2_TUNER_SDA T/C/T2_TUNER_SCL MT5135ADMT5135AD+ IF_AGC_Control RF_AGC_H RF_AGC_T DEMOD_TSCLK DEMOD_TSVAL DEMOD_TSSY NC DEMOD_TSDATA0 SPI_CLK SPI_DATA SPI_CLE CI_INT DEMOD_RST 5135_REFCLKM 5366_XTALO 5135_REFCLKP 5366_XTALI

B14
XTALI Should be 50ohm R1178 51R 1% 2 5135_DV10 16,17 T/C/T2_TUNER_SDA 16,17 T/C/T2_TUNER_SCL 17 MT5135AD17 MT5135AD+ 17 IF_AGC_Control 17 RF_AGC_H 17 RF_AGC_T 13 DEMOD_TSCLK 13 DEMOD_TSVAL 13 DEMOD_TSSY NC 13 DEMOD_TSDATA0 13 SPI_CLK 13 SPI_DATA 13 SPI_CLE 13 CI_INT 13 DEMOD_RST 8 5135_REFCLKM 8 5135_REFCLKP 2,3,4,5,6,7,8,9,10,11,12,13,14,16,17 GND 16,17 Parallel_TSCLK 16,17 Parallel_TSVALID 16,17 Parallel_TSSY NC 16,17 16,17 16,17 16,17 16,17 16,17 16,17 16,17 Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7 Parallel_TSCLK Parallel_TSVALID Parallel_TSSY NC Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

CI_A8 M_CI_INSYNC CI_A9 CI_IOWR# CI_A11 CI_IORD# CI_OE# CI_VS1# CI_A10 PIN72 5135_DV33 CI_CE1# M_CI_OUTDATA7 CI_D7 M_CI_OUTDATA6 CI_D6 M_CI_OUTDATA5

5135_DV33 M_CI_INDATA2 CI_A14 M_CI_INDATA1 CI_A13 M_CI_INDATA0 5135_DV10

M_CI_INDATA5 M_CI_INVALID M_CI_INDATA4 CI_IREQ# M_CI_INDATA3 CI_WE#

5366_XTALI R1175 0R05 1/16W

4 3
X1150 NC/27MHz

PIN90

PIN82

2 1

Demodulator MT5135

PAD_A23 PAD_A16 PAD_A22 PAD_READY PAD_A21 PAD_WE_ DGND33 DVDD33 PAD_A20 PAD_A14 PAD_A19 PAD_A13 PAD_A18 DVDD10 DGND10 PAD_A8 PAD_A17 PAD_A9 PAD_IOWR_ PAD_A11 PAD_IORD_ PAD_OE_ PAD_VS1_ PAD_A10 DGND33 DVDD33 PAD_CE1_ PAD_D15 PAD_D7 PAD_D14 PAD_D6 PAD_D13

U103 MT5135AE

5366_XTALO R1189 0R05 1/16W

R1186 51R 1% Should be 50ohm XTALO

M_CI_INCLK M_CI_INDATA6 CI_A12 M_CI_INDATA7 CI_A7 M_CI_OUTCLK CI_A6 CI_RESET CI_A5 CI_WAIT# CI_A4 CI_A3 PIN109 CI_REG# 5135_DV33 PIN112 5135_DV10 CI_A2 M_CI_OUTVALID CI_A1 M_CI_OUTSY NC CI_A0 M_CI_OUTDATA0 CI_D0 M_CI_OUTDATA1 CI_D1 M_CI_OUTDATA2 CI_D2 CI_CD2# CI_INT 5135_DV33

96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65

PAD_SPI_CLE PAD_SPI_DATA PAD_SPI_CLK PAD_PVR_TS_DATA1 PAD_PVR_TS_DATA0(TS_ERR) PAD_PVR_TS_SYNC(TS_DATA7) PAD_PVR_TS_VAL(TS_DATA6) PAD_PVR_TS_CLK(TS_DATA5) PAD_CI_TS_DATA0(TS_DATA4) PAD_CI_TS_SYNC(TS_DATA3) PAD_CI_TS_VAL(TS_DATA2) PAD_CI_TS_CLK(TS_DATA1) DGND33 DVDD33 PAD_DEMOD_TS_DATA0(TS_DATA0) PAD_DEMOD_TS_SYNC(TS_SYNC) PAD_DEMOD_TS_VAL(TS_VAL) PAD_DEMOD_TS_CLK(TS_CLK) PAD_MT5135_RST DVDD10 AVDD12_PLL AVDD33_RSSI PAD_ADIN0 AVSS33_RSSI PAD_TN PAD_TP AVDD33_DEMOD_3 AVSS33_DEMOD_3 PAD_XTALI AVSS33_XTAL PAD_XTALO AVDD33_XTAL

97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128

PAD_A15 PAD_A24 PAD_A12 PAD_A25 PAD_A7 PAD_VS2_ PAD_A6 PAD_PCMCIA_RESET PAD_A5 PAD_WAIT_ PAD_A4 PAD_A3 DGND33 DVDD33 PAD_REG_ DGND10 DVDD10 PAD_A2 PAD_BVD2 PAD_A1 PAD_BVD1 PAD_A0 PAD_D8 PAD_D0 PAD_D9 PAD_D1 PAD_D10 PAD_D2 PAD_CD2_ PAD_CI_INT DGND33 DVDD33

PAD_D5 PAD_D12 PAD_D4 PAD_D11 PAD_D3 PAD_CD1_ PAD_CHIP_CTRL PAD_S2_TS_DATA7 PAD_S2_TS_DATA6 PAD_S2_TS_DATA5 PAD_S2_TS_DATA4 PAD_S2_TS_DATA3 PAD_S2_TS_DATA2 PAD_S2_TS_DATA1 DVDD33 DGND33 PAD_S2_TS_DATA0 AD_S2_TS_VAL PPAD_S2_TS_SY NC PAD_S2_TS_CLK PAD_RF_AGC PAD_IF_AGC PAD_TUNER_CLK PAD_TUNER_DATA DVDD10 AVSS10_5 AVDD33_IFPGA AVDD12_DEMOD PAD_IFPGA_INP PAD_IFPGA_INN AVSS12_DEMOD_3 PAD_EXT_CLKSEL

R1206 NC/0R05 1/16W 5135_DV10 PIN13 R1213 0R05 1/16W C1185 NC/100N 16V

CI_D5 64 M_CI_OUTDATA4 63 CI_D4 62 M_CI_OUTDATA3 CI_PWR_EN 61 R1203 CI_D3 NC/0R05 1/16W 60 CI_CD1# 59 PAD_CHIP_CTRL 58 R1158 Parallel_TSDATA7 4K7 1/16W 5% 57 Parallel_TSDATA6 56 Parallel_TSDATA5 55 Parallel_TSDATA4 54 Parallel_TSDATA3 53 Parallel_TSDATA2 52 Parallel_TSDATA1 51 50 5135_DV33 PIN49 49 Parallel_TSDATA0 48 Parallel_TSVALID 47 Parallel_TSSY NC 46 45 R1200 0R05 1/16W Parallel_TSCLK R1170 RF_AGC_5135 RF_AGC_H 44 NC/1K 1/16W 5% 43 0R05 1/16W R1171 IF_AGC_Control 5135_SCL T/C/T2_TUNER_SCL R1201 0R05 1/16W C1152 42 5135_SDA T/C/T2_TUNER_SDA NC/47N 50V R1202 0R05 1/16W 41 40 5135_DV10 PIN39 39 38 AVDD33_4 37 5135_AV12 MT5135AD+ 36 5135_DV33 5135_DV33 MT5135AD35 34 R1174 33 AVDD33_3 4K7 1/16W 5% R1205 R1204 NC/4K7 1/16W 5% NC/4K7 1/16W 5% R1177 NC/4K7 1/16W 5% 5135_SCL 5135_SDA

DVBS2/T2_TS IN

DVDD3V3

DVDD3V3

2,3,4,5,6,7,10,11,12,13,14,16,17

CI interface
5135_DV33 5135_DV33 5135_DV33 R1152 10K 1/16W 5% R1150 R1151 R1155 10K 1/16W 5% 10K 1/16W 5% 10K 1/16W 5% CI_CD1# CI_CD2# CI2_VCC C1150 100N 16V C1151 100N 16V CI_VS1# CI_CE2# CI_D3 CI_D4 CI_D5 CI_D6 CI_D7 CI_CE1# CI_A10 CI_OE# CI_A11 CI_A9 CI_A8 CI_A13 CI_A14 CI_WE# CI_IREQ# CI2_VCC CI2_VCC CI_INVALID CI_INCLK CI_A12 CI_A7 CI_A6 CI_A5 CI_A4 CI_A3 CI_A2 CI_A1 CI_A0 CI_D0 CI_D1 CI_D2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

PCMCIA 5V Slot
CN159 GND GND D3 CD1# D4 D11 D5 D12 D6 D13 D7 D14 CE1# D15 A10 CE2# OE# VS1# A11 IORD# A9 IOWR# A8 A17 A13 A18 A14 A19 WE# A20 READY #:IREQ# A21 VCC VCC PCMCIA VPP2 VPP1 A16 A22 A15 A23 A12 A24 A7 A25 A6 VS2# A5 RESET A4 WAIT# A3 INPACK A2 REG# A1 BVD2#:SPKR A0 BVD1#:STSCHG D0 D8 D1 D9 D2 D10 WP# CD2# GND GND 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 CI_CD1# CI_OUTDATA3 CI_OUTDATA4 CI_OUTDATA5 CI_OUTDATA6 CI_OUTDATA7 CI_CE2# CI_VS1# CI_IORD# CI_IOWR# CI_INSY NC CI_INDATA0 CI_INDATA1 CI_INDATA2 CI_INDATA3 CI2_VCC CI2_VCC CI_INDATA4 CI_INDATA5 CI_INDATA6 CI_INDATA7 CI_OUTCLK CI_RESET R1157 100K 1/16W 5% DVDD3V3 CI_WAIT# CI_REG# CI_OUTVALID CI_OUTSY NC CI_OUTDATA0 CI_OUTDATA1 CI_OUTDATA2 CI_CD2#

RP1150 47 OHM 1/16W 5% 5135_DV33 PIN13 1 8 2 7 3 6 4 5 R1191 DEMOD_RST 47R 1/16W 5% 5135_DV10 5135_AV12 0R05 1/16W R1220 AVDD33_1 RSSI GPIO TN TP TP1150

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

R1214 NC/0R05 1/16W

5135_DV33 R1221 NC/0R05 1/16W

CI_WAIT# R1153 10K 1/16W 5% R1154 NC/10K 1/16W 5%CI_OUTCLK CI_IREQ# R1156 10K 1/16W 5%

CI_OCP

5135_DV10

PIN49 R1215 0R05 1/16W C1186 NC/100N 16V SPI_CLE SPI_DATA SPI_CLK R1216 NC/0R05 1/16W

XTALO

XTALI

5135_DV33 R1167 NC/10K 1/16W 5% DEMOD_RST

PIN39 R1222 0R05 1/16W C1189 NC/100N 16V

AVDD33_2

AVDD33_3

Function 1 (Internal CI) CI Interface


PIN82 M_CI_INVALID M_CI_INSY NC M_CI_INDATA0 M_CI_INDATA1 M_CI_INDATA2 M_CI_INDATA3 M_CI_INDATA4 M_CI_INDATA5 M_CI_INDATA6 M_CI_INDATA7 M_CI_INCLK R1159 R1160 R1161 R1162 R1163 R1164 R1165 R1166 R1168 R1169 22R 22R 22R 22R 22R 22R 22R 22R 22R 22R 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% CI_INVALID CI_INSY NC CI_INDATA0 CI_INDATA1 CI_INDATA2 CI_INDATA3 CI_INDATA4 CI_INDATA5 CI_INDATA6 CI_INDATA7 CI_INCLK NC/10PF 50V C1153

5135_DV10

PIN72 R1217 0R05 1/16W C1187 NC/100N 16V DEMOD_TSDATA0 DEMOD_TSSY NC DEMOD_TSVAL DEMOD_TSCLK

R1172 10K 1/16W 5% CI_PWR_EN

R1223 NC/0R05 1/16W 5135_DV33 R1224 0R05 1/16W C1190 NC/100N 16V

R1195

R1218 NC/0R05 1/16W 5135_DV10 PIN90 R1219 0R05 1/16W C1188 NC/100N 16V

0R05 1/16W C1159 10PF 50V R1225 0R05 1/16W RF_AGC_T R1196 10M R1197 7.5M PIN109 RSSI R1226 0R05 1/16W PIN112

R1173 47R 1/16W 5%

Close to MT5366

69 70

69 70

M_CI_OUTVALID M_CI_OUTSY NC M_CI_OUTDATA0 M_CI_OUTDATA1 M_CI_OUTDATA2 M_CI_OUTDATA3 M_CI_OUTDATA4 M_CI_OUTDATA5 M_CI_OUTDATA6 M_CI_OUTDATA7 DVDD3V3 5135_DV33 R1207 0R05 1/10W C1160 NC/10uF 10V AVDD33_1 R1208 5135_AV12 0R05 1/10W C1167 NC/10uF 10V AVDD33_2 R1209 0R05 1/10W C1172 NC/10uF 10V AVDD33_3 R1210 0R05 1/10W C1174 NC/10uF 10V C1175 100N 16V C1178 C1184 NC/10uF 10V NC/100N 16V AVDD33_4 R1211 0R05 1/10W C1176 NC/10uF 10V C1177 100N 16V R1199 NC/10K 1% 1 2 3 C1173 100N 16V C1168 100N 16V R1212 0R05 1/10W C1169 NC/10uF 10V C1170 100N 16V C1171 100N 16V C1161 100N 16V C1162 100N 16V AVDD1V2 C1163 100N 16V C1164 100N 16V C1165 100N 16V C1166 100N 16V M_CI_OUTCLK

R1176 R1179 R1180 R1181 R1182 R1183 R1184 R1185 R1187 R1188

22R 22R 22R 22R 22R 22R 22R 22R 22R 22R

1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W

5% 5% 5% 5% 5% 5% 5% 5% 5% 5%

CI_OUTVALID CI_OUTSY NC CI_OUTDATA0 CI_OUTDATA1 CI_OUTDATA2 CI_OUTDATA3 CI_OUTDATA4 CI_OUTDATA5 CI_OUTDATA6 CI_OUTDATA7

CI Bus Power Control


+5V_SW FB1150 120R/3000mA 1 2 3CI_OCP 1 2 CI2_VCC C1158 + R1194 10K 1/16W 5%

R1190 47R 1/16W 5% C1154 NC/10PF 50V

CI_OUTCLK 1UF16V C1155 CI_PWR_EN 5 4 IN EN U102 OUT GND OC

71 72 C1156

PCMICA CARD

71 72

DVDD3V3

ANALOG POWER 5135_DV10 form DVDD3V3


DVDD3V3 U1150 IN GND SHDN SET 4 OUT 5 R1198 C1179 C1180 C1181 NC/1K 1/16W 1% 100N 16V 100N 16V NC/10uF 10V C1182 C1183 100N 16V 100N 16V 5135_DV10

NC/G9141T11U

RA

Vout= Vref*(1+RA/RB)=1.1V

RB

100N16V

R1192 4.7K1/16W

R1193 4.7K1/16W

NC/100UF 16V

G5250M1T1U

10uF 10V C1157

2012-02-06

DVB T/C Demodulator MT5135

715G5163
19230_531_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-15 DVB T2 Demodulator

TPM9.1E LA

10.

EN 80

B15

DVB T2 Demodulator

B15

DVDD3V3 R1269 NC/0R05 1/10W

3V3_IO DVDD3V3 DVDD3V3 T2_IFAGC


88471_TEST3

AGC_I R1251 NC/10K 1/16W 5%


1V2 T2_OXTALO

1V2

1V2

R1252 NC/4K7 1/16W 5% 3V3_LM R1270 NC/0R05 1/10W 3V3_AD R1271 NC/0R05 1/10W 88471_TEST3 88471_SADR

R1253 NC/4K7 1/16W 5%

C1259 NC/100N 16V

T2_OXTALI

C1288 NC/100N 16V

88471_INT

3V3_LM

3V3_IO

2,3,4,5,6,7,8,9,10,11,12,13,14,15,17 GND

31

25

26

24

22

32

28

27

20

19

29

VSS5

VSS4

TEST3

TEST2

TEST1

VDDL5

VDDL4

SHVPP

TEST0

VDDH2

VDDL3

SHVDDH

VSS3

XO

XI

INT

R1254 NC/4K7 1/16W 5%

R1255 NC/4K7 1/16W 5%

U105

30

23

21

18

17

DVDD3V3 R1256 NC/4K7 1/16W 5% R1258 CSEL0 NC/4K7 1/16W 5% T2_RESET 1V2

15,17 T/C/T2_TUNER_SDA 15,17 T/C/T2_TUNER_SCL 17 15,17 15,17 15,17 15,17 15,17 15,17 15,17 15,17 15,17 15,17 15,17 Parallel_TSERR Parallel_TSCLK Parallel_TSVALID Parallel_TSSY NC Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

T/C/T2_TUNER_SDA T/C/T2_TUNER_SCL Parallel_TSERR Parallel_TSCLK Parallel_TSVALID Parallel_TSSY NC Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

T2_RFAGC

AGC_R R1250 NC/10K 1/16W 5% T2_AINP C1258 NC/100N 16V

33 34 35 36

AVSS AIP AIN AVDD VRB VRT IR TCPO XOUT VDDL6 MSDA VSS6 MSCL VDDL7 VDDH3 AGCR
HDVDDH HDVPP0 HDVPP1 VDDH4 TSDO0 TSDO1 TSDO2 VDDL8 VDDL9

GPO(CSEL1) CSEL0 NRST VDDL2 SDA SCL VSS2 SADR VDDL1 TSDO7 VDDH1 TSDO6 VSS1 TSDO5 TSDO4 TSDO3
E-PAD

16 15 14 13

R1268 NC/4K7 1/16W 5%

AVDD1V2 R1272 NC/0R05 1/10W C1257 NC/10uF 6.3V

1V2

T2_AINN 3V3_AD

C1253 C1254 NC/10uF 6.3VNC/10N 50V

C1269

NC/100N 16V 37

12 T2_DEMOD_SDA 11 T2_DEMOD_SCL 10 9 8 7 6 5 4 3 2 1 T2_TSDATA5 T2_TSDATA4 DVDD3V3 T2_TSDATA3 88471_SADR 1V2 T2_TSDATA7 3V3_IO T2_TSDATA6

C1283 NC/100N 16V 38 R1260 39 NC/10K 1/16W 5% 40 41 1V2 T2_TUNER_SDA 1V2 R1265 NC/0R05 1/16W R1266 NC/0R05 1/16W 1V2 3V3_IO AGC_R 42 43 44 C1260 NC/100N 16V C1261 NC/100N 16V C1262 NC/100N 16V C1263 NC/100N 16V C1264 NC/100N 16V C1265 NC/100N 16V C1266 NC/100N 16V C1275 NC/100N 16V C1276 NC/100N 16V T2_TUNER_SCL 45 46 47 48

4,17 OSCL2 4,17 OSDA2 13 T2_RESET 17 T2_IFAGC 17 T2_RFAGC 13 88471_INT 17 T2_AINP 17 T2_AINN

OSCL2 OSDA2 T2_RESET T2_IFAGC T2_RFAGC 88471_INT T2_AINP T2_AINN

DVDD3V3

2,3,4,5,6,7,10,11,12,13,14,15,17

TSCK

VSS7

VSS8

DEN

PCK

3V3_IO

VSS9

AGCI

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

DVDD3V3

DVDD3V3

T2_TSDATA0

T2_TSDATA1

T2_TSVALID

T2_TSSYNC

TP1250

T2_TSCLK

3V3_LM

3V3_IO

Parallel_TSSY NC Parallel_TSVALID Parallel_TSCLK Parallel_TSERR

AGC_I

1 2 3 4

8 7 6 5 NC/47 OHM 1/16W 5%

T2_TSSY NC T2_TSVALID T2_TSCLK

T2_TSDATA2

C1251 NC/10uF 6.3V

C1273 NC/10N 50V

C1274 NC/100N 16V

C1277 NC/100N 16V

C1278 NC/100N 16V

C1280 NC/100N 16V

RP1250

NC/MN88472

I2C to TUNER
R1261 R1262 NC/4K7 1/16W 5% NC/4K7 1/16W 5% T2_TUNER_SCL T2_TUNER_SDA R1263 NC/0R05 1/10W R1264 NC/0R05 1/10W T/C/T2_TUNER_SCL T/C/T2_TUNER_SDA

3V3_LM Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 1 2 3 4

RP1251 8 7 6 5 NC/47 OHM 1/16W 5% RP1252 T2_TSDATA0 T2_TSDATA1 T2_TSDATA2 T2_TSDATA3

C1285 NC/10N 50V

1V2

C1287 NC/10N 50V

C1250 NC/10uF 6.3V

C1270 NC/1uF 16V

C1271 NC/100N 16V

C1272 NC/10N 50V

1V2

T2_DEMOD_SCL 8 7 6 5 T2_TSDATA4 T2_TSDATA5 T2_TSDATA6 T2_TSDATA7 T2_OXTALI 1


2

3V3_AD

Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

1 2 3 4

X1250 NC/20.5MHz
4

R1257 NC/0R05 1/16W

OSCL2

C1284 NC/100N 16V 3 R1267 NC/0R05 1/16W T2_OXTALO T2_DEMOD_SDA R1259 NC/0R05 1/16W OSDA2

C1279 NC/10uF 6.3V

C1281 NC/100N 16V

C1282 NC/10N 50V

NC/47 OHM 1/16W 5%

C1267 NC/18pF 50V

C1268 NC/18pF 50V

C1286 NC/100N 16V

Demodulator I2C

2012-02-06

DVB T2 Demodulator

715G5163
19230_532_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-16 DVB T2/C/S2 Tuner

TPM9.1E LA

10.

EN 81

B16

DVB T2/C/S2 Tuner


DVB-T/C: Panasonic ENV57U09D5F DVB-T2: Panasonic ENV57U04D8F
TU101 ENV57U09D5F +5V_ANT C1341 +B activ e ANT +B RF-AGC Monitor NC BT Monitor SCL SDA IF Monitor IF AGC IFD-out1 IFD_out2
TH4 TH3 TH2 TH1

B16
Tuner power
TH1300 1

NC/PTCR 2 U1300
C1342 NC/100N 16V

+5V_SW

RF_AGC

T2_RFAGC RF_AGC_Control

NC/G552B1TA1U 1 4 VOUT

VIN
GND

5 3
NC/4K7 1/16W 5% R1321

ON/ON

FLAG

R1343 NC/100K1/16W
1

R1337 NC/0R05 1/16W

8 TU_FAT_IN2+ 8 TU_FAT_IN215 MT5135AD+ 15 MT5135AD13 RF_AGC_Control 15 IF_AGC_Control 15 RF_AGC_T 8 IF_AGC 8 RF_AGC_5366

TU_FAT_IN2+ TU_FAT_IN2MT5135AD+ MT5135ADRF_AGC_Control IF_AGC_Control RF_AGC_T IF_AGC RF_AGC_5366 RF_AGC_H S2_DEMO_SDA S2_DEMO_SCL T2_AINP T2_AINN TUNER_LNB T/C/T2_TUNER_SDA T/C/T2_TUNER_SCL DISEQC_OUT DISEQC_IN Parallel_TSERR Parallel_TSCLK Parallel_TSVALID Parallel_TSSY NC Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

1 +5V_ANT 2 +5V_VCC 3 RF_AGC_T 5 6 TT_SCL 9 TT_SDA 10 11 IF_AGCT 12 DIF_OUT2 13 DIF_OUT1 14

NC/100N 16V

RF_AGC_T

R1304 10K 1/16W 5%

RF_AGC_S

Q1300 NC/BC857C 2

RF_AGC_H

15 RF_AGC_H 3 S2_DEMO_SDA

GND_Tuner

GND_Tuner

GND_Tuner R1300 +5V_TUNER C1308 0.47UF 10V RF_AGC_5366 GND_Tuner GND_Tuner 0R05 1/16W R1336 0R05 1/16W

3 S2_DEMO_SCL 16 T2_AINP 16 T2_AINN 3 TUNER_LNB 15,16 T/C/T2_TUNER_SDA 15,16 T/C/T2_TUNER_SCL 3 DISEQC_OUT 3 DISEQC_IN

FB1305 +5V_VCC C1337 100N 50V C1332 10uF 10V GND_Tuner 1 2 120R/600mA

18 17 16 15

Tuner
GND_Tuner GND_Tuner

IF_AGC
R1361 +5V_TUNER NC/0R05 1/16W 5P6 50V C1338 220pF 50V L1302 0.12UH C1340 220pF 50V C1309 DIF_OUT2 C1333 10PF 50V GND_Tuner C1334 10PF 50V R1311 0R05 1/16W 10N 50V C1345 56pF 50V R1341 0R05 1/16W C1339 R1362 L1303 0.12UH 5P6 50V NC/0R05 1/16W C1346 220pF 50V R1344 51R 1% 10N 50V L1300 0.22uH 10% L1301 NC/0.22uH 10% C1347 NC/10N 50V

R1310 IF_AGC_Control NC/0R05 1/16W

16 Parallel_TSERR 15,16 Parallel_TSCLK 15,16 Parallel_TSVALID 15,16 Parallel_TSSY NC 15,16 15,16 15,16 15,16 15,16 15,16 15,16 15,16 IF_AGC DVDD3V3 Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

IF BPF
0R05 1/16W R1313 C1336 56pF 50V C1307 10N 50V 0R05 1/16W R1340 DIF_OUT1

C1335

DIF to MT5366 for Analog demod


R1307 C1348 TU_FAT_IN2R1339 51R 1% 10N 50V R1342 NC/150R 1/16W R1334 C1302 TU_FAT_IN2+ IF_AGCT NC/10K 1/16W 5% C1344 NC/47N 16V NC/0R05 1/16W R1316 R1333 10K 1/16W 5% T2_IFAGC NC/0R05 1/16W

TUNER I2C
R1317 4K7 1/16W 5% TT_SCL TT_SDA R1325 R1329 100R 1/10W 1% 100R 1/10W 1% R1305 4K7 1/16W 5% TUNER_CLK TUNER_DATA

DVDD3V3

2,3,4,5,6,7,10,11,12,13,14,15,16 T2_IFAGC T2_RFAGC

16 T2_IFAGC 16 T2_RFAGC C1343 47N 16V 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 GND 4,16 OSCL2 4,16 OSDA2

GND_Tuner 0R05 1/16W R1331 C1305 MT5135ADR1346 49.9 OHM 1/16W 1% R1354 0R05 1/16W R1303 49.9 OHM 1/16W 1% R1335 0R05 1/16W 10N 50V R1345 150R 1/16W C1306 MT5135AD+ 10N 50V T/C/T2_TUNER_SCL Q1302 TUNER_CLK NC/2N7002

GND_Tuner

OSCL2 OSDA2 DEMOD_S2_RESET

13 DEMOD_S2_RESET

DVB-T / DVB-C DIF TO MT5135


DVDD3V3

TU101 TU102 R1345 C1308 R1300

LG TDTK-G731D NC YES 75R 47N NC 100K BC857C 180R 180R 470K 330K

Panasonic ENV57U09D5F YES NC 150R 470N 0R NC NC 51R 51R 10M 7.5M TU102 TU101 TU103 R1201/R1202 R1327/R1309 L1300 C1340 C1335/C1339 L1302/L1303 C1336/C1345 R1339/R1344 R1342 R1346/R1303 T/C/S2 36.1Mhz
G731D (SAWless) ENV57U09D5F (SAWless)

R1355

0R05 1/16W DIF_OUT1 R1327 R1309 NC/0R05 1/16W TUN_INN NC/0R05 1/16W TUN_INP

R1343

T/C/T2 36.1Mhz
G641D (SAW)
ENV57U04D8F (SAW)

Remark

T/C/T2_TUNER_SDA

Q1301 TUNER_DATA NC/2N7002

DIF_OUT2

IF BPF for T2
C1366 C1365 R1357 NC/22R 1/16W 5% NC/100N 16V L1304 NC/0.33uH 10% C1367 NC/56pF 50V C1368 TUN_INN R1358 NC/33R 1/16W 5% NC/100N 16V NC/100N 16V R1360 NC/270R 1/16W 5% C1369 R1359 NC/22R 1/16W 5% NC/100N 16V T2_AINN T2_AINP TUN_INP R1356 NC/33R 1/16W 5%

Q1300 R1339 R1344 R1196 R1197

FROM MN88472 or MT5135


DVDD3V3

Tuner
MT5135 I2C for T/C tuner

DVB-T2 DIF TO DVB-T2 DEMOD MN88472

YES YES NC 0.22uH 220P 5P6 0.12uH 56P


51R (Pan) 180R (LG)

NC NC YES NC NC NC 0R NC
49.9R(PAN) TBD(LG) 75R(PAN) TBD(LG)

TUNER I2C level shift

T2 BPF filter

Analog BPF filter

DVB-T/C/T2 TUNER CIRCUIT DVB-S/S2 TUNER & Demodulator CIRCUIT


AVDD1V2 FB1303 120R/3000mA 1 2 C1322 100N 16V DV33_S2_TUNER_AMP
1

NC 49.9R
150R(Pan) 75R(LG)

NC NC NC NC YES YES YES YES


NC(Pan) 100K(LG) NC(Pan) BC847(LG) YES(Pan) NC(LG) YES(LG) NC(PAN)

R1345 R1331/R1335 C1305/C1306 R1333 R1316/C1343 R1307 R1334/C1344


C1328 1N 50V C1330 1N 50V C1324 100N 16V C1331 100N 16V

Digital BPF filter

0R 10N NC NC NC NC
NC(Pan) 100K(LG) NC(Pan) BC847(LG) YES(Pan) NC(LG)

T2 IF_AGCT

DV12_VDDC

AVDD1V2

FB1304 120R/3000mA 1 2 C1323 1N 50V

DV12_PLL

DVDD3V3 1

FB1300 120R/3000mA 2 C1314 100N 16V C1313 100N 16V C1349 100N 16V C1350 100N 16V

DV33_VDDIO

AVDD1V2 1

FB1302 120R/3000mA 2 C1362 10uF 6.3V

DV12_ADC

DVDD3V3

C1329 100N 16V

C1301 100N 16V

C1317 100N 16V

C1318 100N 16V

C1319 100N 16V

C1321 100N 16V

C1326 1uF 16V

C1327 100UF 16V

C1300 100N 16V

C1351 100N 16V

R1343 Q1300

T/C/T2 RF_AGC

DV33_S2_TUNER_ZIF

+5V_SW U1301 NC/G1117-33T63Uf 3 VI


GND

R1302 0R051/8W

R1300
DV33_S2_TUNER_ZIF DV33_VDDIO DVDD3V3

FB1301 NC/120R/3000mA
2

FB1307 120R/3000mA

VO

R1330 2K7 1/16W 5% C1320 10uF 10V + C1370 NC/100UF 16V C1312 1N 50V C1311 NC/100N 16V C1364 100N 16V S2_TUNER_SCL S2_TUNER_SDA

R1326 2K7 1/16W 5% R1308 33R 1/16W 5% 33R 1/16W 5% R1319 S2_TU_SCL S2_TU_SDA

R1312 NC/2K7 1/16W 5% S2_DEMO_SCL S2_DEMO_SDA

R1322 NC/2K7 1/16W 5% R1306 33R 1/16W 5% 33R 1/16W 5% R1318 DEMOD_S2_RESET OSCL2 OSDA2

R1301 10K 1/10W 5% R1323 33R 1/10W 5% S2_RESET

FB1306 C1303/C1304

NC

LNA CONTROL

C1316 NC/1uF 16V

DVB-S/S2 Demodulator I2C

DEMOD_RESET

+5V_SW TO DV33_S2_TUNER For S2 tuner

R1314 4K7 1/16W 5%

R1315 NC/4K7 1/16W 5% S2_RESET

C1363 270pF 50V U104


64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 GND GND RST_B CS_0 LNB_CNTRL_1 LNB_CNTRL_0 DISEQC_OUT VDDC VDDIO DISEQC_IN SDA2 SCL2 GND SDA1 SCL1 SLEEP

DVB-S2 TUNER
TU103 TDQS-A901F LNA B RF 3.3V TU 3.3V QN_OUT QP_OUT IP_OUT IN_OUT AGC X-OUT SDA SCL 1 2 3 4 5 6 7 8 9 10 11 TUNER_LNB DV33_S2_TUNER_AMP DV33_S2_TUNER_ZIF IP IN QP QN RF_AGC_S2_TUNER S2_TUNER_SDA S2_TUNER_SCL IP IN C1310 1N 50V QP GND_Tuner QN C1361 NC/100N 16V C1356 22P 50V C1357 100N16V DV12_VDDC DV12_VDDC C1360 100N 16V C1358 C1359 NC/100N 16V 100N 16V C1315 100N16V C1325 22P 50V DV12_ADC TUNER_IP TUNER_IN DV12_ADC TUNER_QP TUNER_QN DV12_PLL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

DISEQC_OUT DV12_VDDC DV33_VDDIO DISEQC_IN S2_TU_SDA S2_TU_SCL

DV33_VDDIO

S2_DEMO_SDA S2_DEMO_SCL R1349 4K7 1/16W 5%

RP1300 33R 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 DV12_VDDC TS_S2_ERR TS_S2_SY NC TS_S2_VAL DV33_VDDIO DV12_VDDC TS_S2_CLK TS_S2_DQ0 TS_S2_DQ1 DV33_VDDIO DV12_VDDC TS_S2_DQ2 TS_S2_DQ3 TS_S2_ERR TS_S2_SY NC TS_S2_VAL TS_S2_CLK 1 2 3 4 TS_S2_DQ0 TS_S2_DQ1 TS_S2_DQ2 TS_S2_DQ3 TS_S2_DQ4 TS_S2_DQ5 TS_S2_DQ6 TS_S2_DQ7 1 2 3 4 1 2 3 4 RP1301 33R RP1302 33R 8 7 6 5 Parallel_TSERR Parallel_TSSY NC Parallel_TSVALID Parallel_TSCLK 8 7 6 5 8 7 6 5 Parallel_TSDATA0 Parallel_TSDATA1 Parallel_TSDATA2 Parallel_TSDATA3 Parallel_TSDATA4 Parallel_TSDATA5 Parallel_TSDATA6 Parallel_TSDATA7

15 14 13 12

TH4 TH3 TH2 TH1

GND_Tuner R1332 0R05 1/16W


2

R1338 0R05 1/16W 1 X1300 3 10MHz C1353 18PF 50V AVL6211LA

VDDIO GPIO_CLK LOCK TDI TDO TCLK GND TMS TRST_N VDDC MPEG_DATA_7 MPEG_DATA_6 MPEG_DATA_5 VDDIO GND MPEG_DATA_4

ADC_AVDD ADC_AVSS ADC_IP ADC_IN ADC_AVSS ADC_AVDD ADC_QP ADC_QN PLL_AVDD PLL_AVSS VDDC GND VDDC PLL_REFCLK_XI PLL_REFCLK_XO RFAGC

VDDC GND MPEG_ERR MPEG_SY NC MPEG_VALID VDDIO GND VDDC MPEG_CLK MPEG_DATA_0 MPEG_DATA_1 GND VDDIO VDDC MPEG_DATA_2 MPEG_DATA_3

DVB-S2 Parallel TS TO MT5135

C1352 18PF 50V

DV33_VDDIO

DV12_VDDC TS_S2_DQ7 TS_S2_DQ6 TS_S2_DQ5 DV33_VDDIO 4K7 1/16W 5% 4K7 1/16W 5% 4K7 1/16W 5% 4K7 1/16W 5% 4K7 1/16W 5% 4K7 1/16W 5% SMD/0402 R1328 SMD/0402 R1348 SMD/0402 R1350 SMD/0402 R1352 SMD/0402 R1353 SMD/0402 R1351

DV33_VDDIO RF_AGC_S2_TUNER R1320 180R R1324 4K7 1/16W 5% R1347 NC/4K7 1/16W 5%

C1354 100N 16V GND_Tuner

C1355 10N 50V GND_Tuner

DVB-S/S2 Demodulator

TS_S2_DQ4

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

2012-02-06

DVB T2/C/S2 Tuner

715G5163
19230_533_120213.eps 120213

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-2-17 SSB layout top

TPM9.1E LA

10.

EN 82

R402

C1178

C1179

R751

R753

R1212

C1167

C1174

U1150

C1184

R1198

C1182

CN409
Q750

R4193 R4192

R1208 R1210

R752

C750

R1199

C1169

R1220 C1168

R768
Q751 R750

CN402

C753
R418 R401 R4153 R400

C722

C718

R4117 R4116

R769
FB400

U704
C723 C716

U702
C1161 C1185 C1165 R1174 C1171 C1180 C1189 C1170 R1177

R404

R408

C751

R1211
C1177

FB4004

R407 R406

R412

R413

Q402

R1206

R1222

CN408
C408 R417

R1213

C1183 R1214 C1166 R1221

C1176
R1171 R1203 R1170 R1310 R1336 R1343 R1304

C1173

R415

R405

C1163

R1225

R1150

Q401

C1164 C1162 C1181

R1207

U4101
C4135

R1226

C1172 R1209

R1215 C1186

R1204 R1205 R1201 R1202

U102

R409

C1152

R1192

R1193 R1194 C1156 R1157

C1155

C4138

C401 C404

R410

C1160
R1217 C1187

Q1300

FB1150

C4136 C4137

C1157
R1218 R1219 C1188 C1190

R1300 R1337

R1216 R1224 R1223

R4110 C4103

C4139
FB4100

C4140

R571 R509 R570

R506 R511

C1158

RP4111 RP4110

RP4109

R4102

U703
C4104 R4113

RP4108

CN159
C1254
87 12 C

R4100
RP4106

RP4104

C 12 61

76

U402

C4107

51 12 8 C C127

R1269

12 C 75

12

73

C1270

C4108 R4106

C727 R717

R4103

R4101

C721
R706

C4105

C705

Q703

C4109 R4111

TP4101 TP4102

C1282 C1281

C1257

R720

R723

C1279 R1271

R704

C702

Q701

Q700

R705

FB703

R721 R707

R4032

R722

C724

Q702

R4034

R710 R703

C703

C4014

CN700

R709

C4021
R4017

R4104 R4107

R4035
R4033

C601

C706

C700

C713

U401
5

R656 R659 R605 C694 R631 R616

C651 C656 R642 R653 C626 R632

C701
C709

C712
69

C715

R713

R714

C4168 FB4150

R708

R652

R702
FB650 FB652

U700
C708

R712

41

C698

RP4150

R641

R711

R627

C620

FB701

40

R715

C704

FB700

R4001

41

C4172

R626

L750 D750
RP1301

C621

R766
C764

C762

RP1302

R4151

R1318

R1306

C690
R4019 R4018 R4009 R4013 R4010

13

FB702

42

C711

RP1300

R756

R1349 C756

R1344

C755

R1315 R1314 C1363

CN406

FB750

R4012 R4014

R1323
FB1303

U104
R1332 R1338 C1356 C1315 C1325 C1357

R1351 R1350 R1348 R1347 R1328

C767

D753

C761

R770
ZD750
C1310

R4071

C4163

R4186

R4155

R4178

R4182

R4185

C1326
R4036 C1001 C1107 C1104 C1105 C1108 C1009 C1059 C1061 C1063 C1066 C1015 C1054 C1110 C1011 C1012 C1071 C1018 R566

R4189 R4165 R4184 R4180 R4191 R4183

L751
R1330 R1319 R1320 R1308 R1326

R4156

R4166

R4187

R4188

R4154

C4167

R1324 C1355

R1023

R1067

R1100

R1014

R1072

R1075

R1060

R1105

R1104

R1107

R1017

R1101

R1019

C4170

R1079

R1026

C1352

C1359

C1360

C4173

R4162

C4159 R4177 C4164 R4160 R4167

C1358

C1361

X1300

C1353

C1327
C1364 FB1307

X4150

C4156

C4174

R4164

C1354

CN1031
C1370 C4053

C4157

U4150

RP4151

D1100

R4170

D1101

R4169
C4166

R4179 R4181

U4151

C4061

C4065

C4178 C4179

C4062

R4173
C4160

R4077 R4076

C4155

U1301

R4172

C1316

R4163

C4056 R4061

C4051 R4054
R4052 R4053 C4151

C4152

R4190

C629

CN101
C1056 R1062 C1057
46 C 13 13 47 13 38 1 R 35 13 2 C 30 L1 303 L1 339 1 C 1362 1 36 C C

C4052

C4064

R4055

CN604
C631

R1117

C4161

L1050

C4162

R1113

R1114

C1100

R1111

R4074

C1102

R1110

CN4150

L1

R1115

R1120

R4072

C4063

30

ZD1101 ZD1100

R606 R608 C633


R

C1055

R1119

R1064

C625

R4168

C1112

R1109

U600

R1077

C1065

U701
R1065 R1069

R639

C632

CN4056

R1112

CN4052

CN411

C1101

R635

CN410

R629 C636 C634 R634

R630 C627 R633 C628

D4051

C1333 C1334

R1015 R1013 C1010 R1016

R1076

C1064

R1305

R4066 R4065
D4054 R4064

R1071 C1060 R1070

C1062

R4082

R1073

R638

R4057

C725

C726

R1325

TU101

R636

R4056

C635

C622

C624

R4083

R4063

R624

Q600 R625

C720
C1308

C684

R680

C1332

D701

D653

D651

D650

D652

C1053

C679

C736

C737

R663

R681

R1056

C1069

C1067

R682

L653

R1321

Q651

R683

C687
C732

C1052

R1020 R690 R674 R4026 R673 R4025 R684 C662

R1018

R662 C734
R689 R688 C670
C681

R1053

C686 R657

C658

R1051

TH1300
C1341
55 4 R 50 R 5

C660

C741

C653

C673

C659

C1014 R1022

C689

R 51 51 4 0

CN601

U511 U513

L651

R1021

C697

C666

C692

C682

55 7

55 6

55 5

CN111

C1013

U1300

C733

C1342

FB1305

R1055

C1058

C1337

R664

R678

R679

C738

C739

CN602

C675

R676

R670
Q652

C1070

R675

C1068

R628

C717

D600
R640

L652

R677

R1068

R573 R543 R504 R508 R507

FB653

C677

C665

R686

C669

C740 C731

C664

C696

R545 C518 R552 R518

C654
C688

C667

R655

R516

R517

R532

D501

C680

C729

C728

C678

D509

R687

C671

C674 C730

C695 R692

C663 R693

C676

FB651
R541 R539

D508 ZD502
R538 C515 R537

R531

R515

C691

D503

C668

C661
D505 D506
R529 D502 R572 R527

R544

ZD503 D511
R564 R548 Q506 R550

R660

C699 R654 R691

R661

U502 U501

R526

R651
C735

ZD501

R567

R519

R568

U503

C510 FB503

R520 C513 R525

U508

U506 U505

L650
C652

C683

CN502

Q502

C693

Q504

C672

CN501
1 2011-12-02

C685

U510

R685

U602

R569

U500

CN503

FB601

CN102

C637

C1344

CN151

R1317

R1329

R637

R4171

R1334

U601

C619

C638

C618

C639

13 40

L1 30 0

R623

C630

R4062

C4154

U1051

R4075

R4161

C4150

CN401

R4073

C4176 C4177

R1106

R1102

R1108

R4174

C4158

TU103

C1311

R1302 C1320

R4060

C1109

C1106

C1111

C4055

FB1301

C4165

R1103 C1312

FB4051

TH4051

R4067

R1352

C5058

U1052

U750

41

58

R1353

C765

R761

X4001

C759

R1301

R1312

R757

D752

R4068

R1322

C4060

C752
R4011

R1339

C4005 C4006

U751

C763

D751
FB4052

C766

TH4052

CN1033

C707

C710

C754

C4057

C623

L700

C714

C1263

C1253

R1272

R4114

C1265

U403

RP4100

C1260
12 C

C 12

71

12

C719

RP4102

50

R4109
12 C

C1264

R1270

C 12 74

12 C 66

72 12 C 80 12 C 12 C

77 62

CN1032

R 10 11 C 13 C 48 13 02 12 R 10

2012-Apr-27 back to

13 13 11 36 R 13 13 07 R C 13 09 C 13 45 40 C 13 13 41 C 13 R

SSB layout top

715G5163
19230_534_120214.eps 120214

div. table

Circuit Diagrams and PWB Layouts


10-2-18 SSB layout bottom

TPM9.1E LA

10.

EN 83

X1150
R1175
R1195

C1159
R1196
RP1150

R1197

R1172

C1175 R1189

R1186 R1178
TP1150

R1191

R1151

R1167

TP415

TP404

TP416

TP417 TP402

TP418

TP419

TP400

C1151

TP403

TP401

R1182 R1181 R1180


TP422 TP413

R1345

R1346 R1303

R1331 C1305 R1335 C1306

R1179
TP423

TP411 TP412

TP414

R1200

U103
R1153 C1154 R1190
R1158

R1176
TP420

TP410

TP408

TP407

TP405

R4002

TP421 TP409

TP406

R1169
R 11 54

R1168 R1173
R1183 R1184

R4041 R4043

C1150

R1185

R1188

C1153 R1166 R1159

R4005

U4051
R4021 C4023
Q4000

C4001

C4003

C4002

C4124
R1156

R 60 11

R4040 R4000

TP1250

R4022

R4020

C4022

RP1250

C4119

87 11 R

R1165
R 11 62 R 11 R 11 63 R 11 64

C4134

R4006

12 53

RP1252

C4110
R4119 C4121 C4130

RP4105

R718
R

R4118 R4115
C4106

RP4107

RP1251

R719

61

12

59

R4176

U409

C4127
C4123 C4128 C4125

57

12 55
84 12 C

11 52

12

12 68

C4120

RP4101

U105
88 12 C

C4112

58

12

RP4103

C4118

C4129

C1008

C406

12

R416

R411

X1250

C4101

83

60

68

13

R1008

R1009

12

C403
C4116 C4113 C407

C4102

R4108

12

67

30

L1

67

R1354

R1316 C1343 C657 C655

R1333

13

C4100

R1355
R4004

C4017 C4009

C4018

R658 R672
TP600

C4115 R4112 C4016 C4015

TP602

C4020

C602

TP604

R754

TP603 TP601

C4019

TP4152

TP605

C4008 R4159 R403 C509 R4175 R4015

C4007

R601

C604

C605

R600

C600

R602

C1006

R1006

C1007

C603

R1007

C1005

R758

R755

R767

R759 R763 R764 R765

R1010

R1004

R1002

R760

R1005

C1002 C4012
TP1000

C4011

R1063

C1003

R771
C1349 C1350

R762

C758

R1003
C1318 C1322

C4004

R4031

R4024 R4023

R4030

C511

R4042

C1314

R4152

FB1300

R4027 R4028

R4008

U410
R4016

C1351

C1328

C1324
C1329 C1319 C1331

C1330

C1362
C1323

C1300

FB1304

R4058 R4059

FB1302

R4037 R4038

C1321

C1317

C1301

Q1101

Q1105

Q1102

Q1104

R620

R1131
R617 C615

Q1103

R1130

R1128

C613
R619 R618

R1116

C1113
R1127

Q1100

U110
C1103

C614
R615

C609 R607 R604

C611

C610

U106
R612 R613

FB600

C606

C607

R611

R610

R1058
R1057 R1052 R1054 C1024

C612

R609

R614

C608

R603

Q1051

Q1050

R574

R1024

C502
50
R512 R513

U509

D510

D504

R530

C516

R563

R522

50

R562

R547

R553

R565

R546

R558
R523 R524 C517

R561

R540

R535 R536

R559

R542

R560

D507

Q501

U507

R534

Q505

U504

R528

U512

C514

C616

C512

Q503

R621

R549

50

R622

50

C617

C1016

C1023

R1025

C1017

R1129

R1118

86 12 C
R 12 56

85 12 C
R 12 51

11 55

C 59 12
0 13 R 7

R4120 C4132
TP700

C
R R 12

58 12 50 12

TP701

R 12 54
C 12 C 13 C 69 13 65
R4069 R4070

66 R

R 12

R 12

65

12

R 12

C4131

61

52

TP702

60

12 63 64 12 2 R 26

C402

TP424

C4122
C4133

69

Q1302

R4105

C4126
TP703

C 12 67

59 13 R 57 13 R

Q1301

C4111 C4114

27 13 09 R 13 R 58 13 56 R 13 68 R 13 66 C 13 C

TP704

C1004

TP705

R4007

R502

TP706

C4010

R4029 C4013

R503
TP4150

C1313

C4171 C4175 C4153 R4195 R4194

R4157

R1121 R1122

9 51 C 0 52 C

6 50 C 4 50 C

2011-12-02

SSB layout bottom

715G5163
19230_535_120214.eps 120214

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts 10.3 J 715G5230 IR/LED 3000 series
10-3-1 IR/LED board

TPM9.1E LA

10.

EN 84

IR/LED board

3V3SB 3V3SB R301 2.2K 1/10W 1 7 1 2 3 4 5 6 8

LED_R RC6

CN201 CONN

KEY1 KEY2

Red
R302 1K 1/10W LED_R

LED301 LED

Q301 BC847C

C201 10uF 10V

KEY2 KEY1

1 2 3 C001 0.1UF50V C002 0.1UF50V 5

4 CN001 CONN 3V3SB R201 NC/2K7 1/16W 5% R202 100R RC6 C203 NC/100P 50V C204 1UF16V 2 D201 BAV99 3 1 2 D202 BAV99 3 1 1 2 3 4 U201 GND Vs OUT GND TSOP75436W

2011-10-14

IR/LED board

715G5230
19230_536_120305.eps 120305

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-3-2 IR/LED Board layout

TPM9.1E LA

10.

EN 85

Layout IR/LED Board (Top Side)

R201

D202

D201

R202

C203

R301

U201
Layout IR/LED Board (Bottom Side)

LED301

C002

C204
R302

Q301

CN001

CN201
1 2011-10-14

C001
IR/LED board layout top/bottom

C201

715G5230
19230_537_120305.eps 120305

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts 10.4 E 715G5199 Keyboard 3000 series
10-4-1 Keyboard control panel

TPM9.1E LA

10.

EN 86

Keyboard
1 R01 470R 1/10W 1% 3 SW01 SW 2 4 KEY1

Power
2 ZD01 R02 2K2 1/10W 1% 1

----><----|

3 SW02 SW

CH2 ZD02 R03 5K6 1/10W +/-1% 1

----><----|

3 CN01 SW03 SW

CH+
2 ZD03 1

KEY2 KEY1

1 2 3

-------><------| --------><-------|

----><----|

R08 NC/0R05 OHM 1 R04 470R 1/10W 1% 3 SW04 SW 2 4 R07 0R05 OHM

R09 NC/1K 1/10W

CONN

Source
2 ZD04 R05 2K2 1/10W 1% 1

KEY2

----><----|

3 SW05 SW

Vol2 ZD05 R06 5K6 1/10W +/-1% 1

----><----|

3 SW06 SW

Vol+
2 ZD06 1

----><----|

2011-10-14

Keyboard

715G5199
19230_538_120305.eps 120305

2012-Apr-27 back to

div. table

Circuit Diagrams and PWB Layouts


10-4-2 Key board layout

TPM9.1E LA

10.

EN 87

Layout Key Board (Top Side)

SW01

SW03

SW02

SW04

SW06

SW05

Layout Key Board (Bottom Side)

R07 R09 R08

ZD05

R05

ZD04

ZD02

ZD06

ZD03

ZD01

R04

R02

R06

R03

R01

CN01
1 2011-10-14

Keyboard layout top/bottom

715G5199
19230_539_120308.eps 120313

2012-Apr-27 back to

div. table

Styling Sheets

TPM9.1E LA

11.

EN 88

11. Styling Sheets


11.1 3000 32"

3000 series 32"

1053 1050

0031

1054 1057 0041

1056 0032
Pos No. Description Remarks

0030

0031 0032 0041 0030 1050 1053 1054 1056 1057 1176

Front bezel Deco bezel Rear cover Stand Display panel Panel SSB Power Supply Unit IR/LED panel Keyboard control panel Remote control

Not displayed

FOR ELECTRICAL PARTS/ASSEMBLIES SEE WIRING DIAGRAM CHAPTER 9


19230_800_120305.eps 120316

2012-Apr-27 back to

div. table

Styling Sheets
11.2 3000 37"

TPM9.1E LA

11.

EN 89

3000 series 37"

1053 0041

0031 1054

1057

0032 1050 0050


Pos No. 0031 0032 0041 0050 1050 1053 1054 1056 1057 1176 Description Front bezel Deco bezel Rear cover Stand Display Panel Panel SSB Power Supply Unit IR/LED panel Keyboard control panel Remote control Remarks

1056

Not displayed

FOR ELECTRICAL PARTS/ASSEMBLIES SEE WIRING DIAGRAM CHAPTER 9


19230_801_120306.eps 120306

2012-Apr-27 back to

div. table

Styling Sheets
11.3 3000 42"

TPM9.1E LA

11.

EN 90

3000 series 42"

1053 0041

1054

1057

1056 1050 0050 0032 0031

Pos No. 0031 0032 0041 0050 1050 1053 1054 1056 1057 1176

Description Front bezel Deco bezel Rear cover Stand Display panel SSB panel Power Supply Unit IR/LED panel Keyboard control panel Remote control

Remarks

Not displayed

FOR ELECTRICAL PARTS/ASSEMBLIES SEE WIRING DIAGRAM CHAPTER 9


19230_802_120306.eps 120316

2012-Apr-27 back to

div. table

Styling Sheets
11.4 3000 47"

TPM9.1E LA

11.

EN 91

3000 series 47"

1053

0041

1054

1057

1050

0031
Pos No. 0031 0032 0041 0050 1050 1053 1054 1056 1057 1176 Description Front bezel Deco bezel Rear cover Stand Display panel SSB panel Power Supply Unit IR/LED panel Keyboard control panel Remote control Remarks

1056 0032

0050

Not displayed

FOR ELECTRICAL PARTS/ASSEMBLIES SEE WIRING DIAGRAM CHAPTER 9


19230_803_120306.eps 120316

2012-Apr-27 back to

div. table

You might also like