You are on page 1of 6

Ybarra

Duke University Department of Electrical and Computer Engineering ECE 110 Fall 2012 Final Exam Tuesday, December 11
Print Name_______________________________ My signature below indicates that I have honored the Duke Community Standard and have neither provided nor received assistance on this closed book/notes final exam. Signature_________________________________ 15% [1]

Given v1, v2, i1, i2, R1, R2, and R3. Extra paper is available at the end of the exam if needed. a) Solve for the unknown voltage vx in terms of the given symbols. b) Solve for the power delivered by the current source i1 in terms of the given symbols.

Ybarra

15% [2]

Given:

( ) ( )

( (

) )

( )

Solve for the unknown voltage vx(t).

Ybarra

20% [3]

a) b) c)
Find and graph the current ix(t) for all time. You must obtain and solve a differential equation in your solution process for t > 0. List each process as you use it (e.g. KCL n1).

Ybarra

15% [4] Consider the following NMOS digital logic circuit

Determine the output function F of the digital logic circuit shown above.

Ybarra

%5 [5] What are the reasons for using frequency domain analysis?

10% [6] Given ( )

) V, accurately graph this voltage waveform.

Ybarra

20% [7] Signal Spectrum and Response to a Periodic Input. Remember to show all you work. Answers with no work shown will receive no credit. a) Given the Fourier series of iin(t) as the input current in the circuit in figure 1, graph the spectrum of iin(t) from DC to 6 kHz. b) Calculate the frequency response of the circuit including the half power frequency. Graph the magnitude and phase of the frequency response explicitly showing the coordinates associated with the half power frequency. a)

( )

b)

R1 = 400 L1 = 60 mH

Figure 1 Circuit for parts b) and c) of problem [7]. c) Calculate the Fourier series of the output voltage of the circuit in figure 1 with the input current expressed in terms its Fourier series given in part a).

You might also like