Professional Documents
Culture Documents
Sodiumtripolyphosphate
Cas.no. 7758-29-4 Slurry manufacture Hot-spraying process normal grades
N 40 1
min. 96
C C kg/l %
abt. 57 max. 1 max. 4 96 - 98 abt. 0.2 9.2 - 10.0 approx. 02 max. 50 typical 10 typical 1 typical 1 typical 1 typical 1 min. 90
Triphosphate Na5P3O10
Loss on ignition at 360 C pH (1 % aqueous solution) Water-insoluble constituents Iron (Fe) Arsenic (As) Chromium (Cr) Nickel (Ni) Lead (Pb) Cadmium (Cd) Whiteness at 427and 577 nm
1) 2)
abthermphos
Thermphos
Sodiumtripolyphosphate
Cas.no. 7758-29-4 Slurry manufacture Hot-spraying process normal grades
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale. Edition: August 2003 / EN-PL-080
abthermphos